2015-2020 Hyundai I20 4 Door Maintenance -> Explanation of scheduled maintenance items User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Explanation of scheduled maintenance items for Your Hyundai I20 4 Door Second Generation (2015-2020)

,204/3424-3  
$ꢀꢁꢂ " ꢃ!ꢄ"#ꢄꢅ#ꢆꢇꢈ$ꢉꢊꢂ$ꢉ#ꢋ !"ꢃ$" "ꢇ$#!ꢃ$ꢋꢆ  
Engine oil and filter  
Fuel filter  
Fuel lines, fuel hoses and con-  
nections  
The engine oil and filter should be A clogged filter can limit the speed at  
changed at the intervals specified in which the vehicle may be driven,  
the maintenance schedule. If the car damage the emission system and  
is being driven in severe conditions, cause multiple issues such as hard  
more frequent oil and filter changes starting. If an excessive amount of  
Check the fuel lines, fuel hoses and  
connections for leakage and dam-  
age. We recommend that the fuel  
lines, fuel hoses and connections be  
replaced by an authorized HYUNDAI  
dealer.  
are required.  
foreign matter accumulates in the  
fuel tank, the filter may require  
replacement more frequently.  
After installing a new filter, run the  
engine for several minutes, and  
check for leaks at the connections.  
We recommend that the fuel filter be  
replaced by an authorized HYUNDAI  
dealer.  
Drive belts  
WARNING  
Inspect all drive belts for evidence of  
cuts, cracks, excessive wear or oil  
saturation and replace if necessary.  
Drive belts should be checked peri-  
odically for proper tension and  
adjusted as necessary.  
Diesel only  
Never work on injection system  
with engine running or within 30  
seconds after shutting off engine.  
High pressure pump, rail, injectors  
and high pressure pipes are sub-  
ject to high pressure even after  
the engine stopped. The fuel jet  
produced by fuel leaks may cause  
serious injury, if it touch the body.  
People using pacemakers should  
not move than 30cm closer to the  
ECU or wiring harness within the  
engine room while engine is run-  
ning, since the high currents in the  
Common Rail system produce  
considerable magnetic fields.  
NOTICE  
When you are inspecting the belt,  
place the ignition switch in the  
LOCK/OFF or ACC position.  
1.%)  
Vapor hose and fuel filler cap  
Vacuum crankcase ventilation  
hoses (if equipped)  
Air cleaner filter  
The vapor hose and fuel filler cap  
should be inspected at those inter-  
vals specified in the maintenance  
schedule. Make sure that a new  
vapor hose or fuel filler cap is cor-  
rectly replaced.  
We recommend that the air cleaner  
filter be replaced by an authorized  
HYUNDAI dealer.  
Inspect the surface of hoses for evi-  
dence of heat and/or mechanical  
damage. Hard and brittle rubber,  
cracking, tears, cuts, abrasions, and  
excessive swelling indicate deterio-  
ration. Particular attention should be  
paid to examine those hose surfaces  
nearest to high heat sources, such  
as the exhaust manifold.  
Spark plugs  
Make sure to install new spark plugs  
of the correct heat range.  
WARNING  
Inspect the hose routing to assure  
that the hoses do not come in con-  
tact with any heat source, sharp  
edges or moving component which  
might cause heat damage or  
mechanical wear. Inspect all hose  
connections, such as clamps and  
couplings, to make sure they are  
secure, and that no leaks are pres-  
ent. Hoses should be replaced  
immediately if there is any evidence  
of deterioration or damage.  
Do not disconnect and inspect  
spark plugs when the engine is  
hot. You may burn yourself.  
1.%(  
,204/3424-3  
Cooling system  
Continuously Variable Transaxle  
fluid (if equipped)  
NOTICE  
Check cooling system components,  
such as radiator, coolant reservoir,  
hoses and connections for leakage  
and damage. Replace any damaged  
parts.  
The use of non-specified fluid (even  
marked as compatible with genuine)  
could result in shift quality deteriora-  
tion and vibrations, eventually, the  
transaxle failure.  
Use only specified Continuously  
Variable Transaxle fluid. (Refer to  
"Recommended lubricants and  
capacities" in chapter 8.)  
Continuously Variable Transaxle fluid  
should not be checked under normal  
usage conditions.  
But, the Continuously Variable  
Transaxle fluid should be changed  
under severe usage conditions. We  
recommend that the Continuously  
Variable Transaxle fluid changed by  
an authorized HYUNDAI dealer  
according to the maintenance sched-  
ule. (Refer to “Maintenance Under  
Severe Usage Conditions” in this  
chapter. )  
Coolant  
The coolant should be changed at  
the intervals specified in the mainte-  
nance schedule.  
Brake hoses and lines  
Manual transaxle fluid  
(if equipped)  
Inspect the manual transaxle fluid  
according to the maintenance sched-  
ule.  
Visually check for proper installation,  
chafing, cracks, deterioration and  
any leakage. Replace any deteriorat-  
ed or damaged parts immediately.  
i
Information  
Continuously Variable Transaxle fluid  
color is basically light amber.  
Brake fluid  
As the vehicle is driven, the  
Continuously Variable Transaxle fluid  
will begin to look darker.  
Check brake fluid level in the brake  
fluid reservoir. The level should be  
between "MIN" (Minimum) and  
"MAX" (Maximum) marks on the side  
of the reservoir. Use only hydraulic  
brake fluid conforming to DOT 3 or  
DOT 4 specification.  
It is normal condition and you should  
not judge the need to replace the fluid  
based upon the changed color.  
1.%#  
Parking brake  
Drive shafts and boots  
Inspect the parking brake system Check the drive shafts, boots and  
including the parking brake pedal clamps for cracks, deterioration, or  
and cables.  
damage. Replace any damaged  
parts and, if necessary, repack the  
grease.  
Brake discs, pads, calipers and  
rotors  
Check the pads for excessive wear,  
discs for run out and wear, and  
calipers for fluid leakage.  
Air conditioning refrigerant  
(if equipped)  
Check the air conditioning lines and  
connections for leakage and dam-  
age.  
Suspension mounting bolts  
Check the suspension connections  
for looseness or damage. Retighten  
to the specified torque.  
Steering gear box, linkage &  
boots/lower arm ball joint  
With the vehicle stopped and engine  
off, check for excessive free-play in  
the steering wheel.  
Check the linkage for bends or dam-  
age. Check the dust boots and ball  
joints for deterioration, cracks, or  
damage. Replace any damaged  
parts.  
1.%$  

Related Topics

Popular Owner Manuals