2016-2026 Hyundai I30 4 Door Driving your vehicle -> Cruise control system (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving your vehicle -> Cruise control system (if equipped) for Your Hyundai I30 4 Door Third Generation (2016-2026)

Driving your vehicle  
CRUISE CONTROL SYSTEM (IF EQUIPPED)  
E090000AFD-EA  
(Continued)  
• Pay particular attention to the  
The cruise control system allows you to  
program the vehicle to maintain a con-  
stant speed without resting your foot on  
the accelerator pedal.  
This system is designed to function  
above approximately 40 km/h (25 mph).  
driving conditions whenever  
using the cruise control system.  
• Be careful when driving downhill  
using the cruise control system,  
which may increase the vehicle  
speed.  
WARNING  
• If the cruise control is left on,  
(CRUISE indicator light in the  
instrument cluster illuminated)  
the cruise control can be  
switched on accidentally. Keep  
the cruise control system off  
(CRUISE indicator light OFF)  
when the cruise control is not in  
use, to avoid inadvertently set-  
ting a speed.  
CAUTION  
OFD057010  
During cruise-speed driving of a  
manual transaxle vehicle, do not  
shift into neutral without depress-  
ing the clutch pedal, since the  
engine will be overrevved. If this  
happens, depress the clutch pedal  
or release the cruise control  
ON/OFF switch.  
E090100AUN  
To set cruise control speed:  
1. Push the CRUISE ON-OFF button on  
the steering wheel to turn the system  
on. The CRUISE indicator light in the  
instrument cluster will illuminate.  
2. Accelerate to the desired speed, which  
must be more than 40 km/h (25 mph).  
• Use the cruise control system  
only when travelling on open  
highways in good weather.  
NOTICE  
• Do not use the cruise control  
when it may not be safe to keep  
the car at a constant speed, for  
instance, driving in heavy or  
varying traffic, or on slippery  
(rainy, icy or snow-covered) or  
winding roads or over 6% up-hill  
or down-hill roads.  
During normal cruise control operation,  
when the SET switch is activated or  
reactivated after applying the brakes,  
the cruise control will energize after  
approximately 3 seconds. This delay is  
normal.  
(Continued)  
5 27  
Driving your vehicle  
OFD057011  
OFD057012  
OFD057011  
E090200AFD  
E090300AFD  
3. Push the COAST/SET switch, and  
release it at the desired speed.The SET  
indicator light in the instrument cluster  
will illuminate. Release the accelerator  
at the same time.The desired speed will  
automatically be maintained.  
On a steep grade, the vehicle may slow  
down or speed up slightly while going  
downhill.  
To increase cruise control set  
speed:  
Follow either of these procedures:  
• Push the RES/ACCEL switch and hold  
it. Your vehicle will accelerate. Release  
the switch at the speed you want.  
• Push the RES/ACCEL switch and  
release it immediately. The cruising  
speed will increase by 1.6 km/h (1 mph)  
each time the RES/ACCEL switch is  
operated in this manner.  
To decrease the cruising speed:  
Follow either of these procedures:  
• Push the COAST/SET switch and hold  
it. Your vehicle will gradually slow  
down. Release the switch at the speed  
you want to maintain.  
• Push the COAST/SET switch and  
release it immediately. The cruising  
speed will decrease by 1.6 km/h (1  
mph) each time the COAST/SET switch  
is operated in this manner.  
5 28  
Driving your vehicle  
E090400AUN  
Each of these actions will cancel cruise  
control operation (the SET indicator light  
in the instrument cluster will go off), but it  
will not turn the system off. If you wish to  
resume cruise control operation, push  
the RES/ACCEL switch located on your  
steering wheel. You will return to your  
previously preset speed.  
To temporarily accelerate with the  
cruise control on:  
If you want to speed up temporarily when  
the cruise control is on, depress the  
accelerator pedal. Increased speed will  
not interfere with cruise control operation  
or change the set speed.  
To return to the set speed, take your foot  
off the accelerator.  
OFD057013  
E090500AFD  
To cancel cruise control, do one  
of the following:  
• Press the brake pedal.  
• Press the clutch pedal with a manual  
transaxle.  
• Shift into N (Neutral) with an automatic  
transaxle.  
• Press the CANCEL switch located on  
the steering wheel.  
• Decrease the vehicle speed lower than  
the memory speed by 15 km/h (9  
mph).  
• Decrease the vehicle speed to less  
than approximately 40 km/h (25 mph).  
5 29  
Driving your vehicle  
E090700AUN  
To turn cruise control off, do one  
of the following:  
• Push the CRUISE ON-OFF button (the  
CRUISE indicator light in the instru-  
ment cluster will go off).  
Turn the ignition off.  
Both of these actions cancel cruise con-  
trol operation. If you want to resume  
cruise control operation, repeat the steps  
provided in “To set cruise control speed”  
on the previous page.  
OFD057012  
E090600AUN  
To resume cruising speed at  
more than approximately 40 km/h  
(25 mph):  
If any method other than the CRUISE  
ON-OFF switch was used to cancel  
cruising speed and the system is still  
activated, the most recent set speed will  
automatically  
resume  
when  
the  
RES/ACCEL switch is pushed.  
It will not resume, however, if the vehicle  
speed has dropped below approximately  
40 km/h (25 mph).  
5 30  

Related Topics

Popular Owner Manuals