2016-2026 Hyundai I30 4 Door Maintenance -> Automatic transaxle fluid (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Automatic transaxle fluid (if equipped) for Your Hyundai I30 4 Door Third Generation (2016-2026)

Maintenance  
AUTOMATIC TRANSAXLE FLUID (IF EQUIPPED)  
2. After the transaxle is warmed up suffi-  
ciently (fluid temperature 70~80°C  
(158~176°F), for example by 10 min-  
utes usual driving, move the shift lever  
through all positions then place the  
selector lever in “N (Neutral) or P  
(Park)” position.  
OHD076012  
OHD076045N  
G100100AFD-EA  
3. Confirm that the fluid level is in “HOT”  
range on the level gauge. If the fluid  
level is lower, add the specified fluid  
from the fill hole. If the fluid level is  
higher, drain the fluid from the drain  
hole.  
4. If the fluid level is checked in cold con-  
dition (fluid temperature 20~30°C  
(68~86°F) add the fluid to “C” (COLD)  
line and then recheck the fluid level  
according to the above step 2.  
Checking the automatic transaxle  
fluid level  
The automatic transaxle fluid level  
should be checked regularly.  
Keep the vehicle on the level ground with  
the hand brake applied and check the  
fluid level according to the following pro-  
cedure.  
1. Place the selector lever in N (Neutral)  
position and confirm the engine is run-  
ning at normal idle speed.  
7 29  
Maintenance  
NOTICE  
CAUTION  
WARNING - Transaxle fluid  
New automatic transaxle fluid should be  
red. The red dye is added so the assem-  
bly plant can identify it as automatic  
transaxle fluid and distinguish it from  
engine oil or antifreeze. The red dye,  
which is not an indicator of fluid quali-  
ty, is not permanent. As the vehicle is  
driven, the automatic transaxle fluid  
will begin to look darker. The color may  
eventually appear light brown.  
• Low fluid level causes transaxle  
slippage. Overfilling can cause  
foaming, loss of fluid and transaxle  
malfunction.  
The transaxle fluid level should be  
checked when the engine is at nor-  
mal operating temperature. This  
means that the engine, radiator,  
radiator hose and exhaust system  
etc., are very hot. Exercise great  
care not to burn yourself during  
this procedure.  
• The use of a non-specified fluid  
could result in transaxle malfunc-  
tion and failure.  
Therefore,  
have  
an  
authorised  
WARNING - Hand brake  
HYUNDAI dealer change the automatic  
transaxle fluid according to the  
Scheduled Maintenance at the begin-  
ning of this section.  
To avoid sudden movement of the  
vehicle, apply hand brake and  
depress the brake pedal before  
moving the shift lever.  
Use only the specified automatic  
transaxle fluid. (Refer to “Recommended  
lubricants and capacities” in section 9.)  
NOTICE  
“C” (COLD) range is for reference only  
and should NOT be used to determine  
transaxle fluid level.  
G100200AFD-EA  
Changing the automatic transaxle  
fluid  
Have automatic transaxle fluid changed  
by an authorised HYUNDAI dealer  
according to the Maintenance Schedule  
at the beginning of this section.  
7 30  

Related Topics

Popular Owner Manuals