2016-2026 Hyundai I30 4 Door Maintenance -> Wiper blades User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Wiper blades for Your Hyundai I30 4 Door Third Generation (2016-2026)

Maintenance  
WIPER BLADES  
G180200AUN  
Contamination of either the windshield or  
the wiper blades with foreign matter can  
reduce the effectiveness of the wind-  
shield wipers. Common sources of con-  
tamination are insects, tree sap, and hot  
wax treatments used by some commer-  
cial car washes. If the blades are not wip-  
ing properly, clean both the window and  
the blades with a good cleaner or mild  
detergent, and rinse thoroughly with  
clean water.  
Blade replacement  
When the wipers no longer clean ade-  
quately, the blades may be worn or  
cracked, and require replacement.  
CAUTION  
To prevent damage to the wiper  
arms or other components, do not  
attempt to move the wipers manual-  
ly.  
1JBA5122M  
CAUTION  
G180100AUN-EA  
To prevent damage to the wiper  
blades, do not use petrol, kerosene,  
paint thinner, or other solvents on  
or near them.  
Blade inspection  
CAUTION  
The use of a non-specified wiper  
blade could result in wiper malfunc-  
tion and failure.  
NOTICE  
Commercial hot waxes applied by auto-  
matic car washes have been known to  
make the windshield difficult to clean.  
7 36  
Maintenance  
1JBA7037  
1LDA5023  
OEN076049  
G180201AFD  
Front windshield wiper blade  
Type B  
Type A  
1. Raise the wiper arm.  
1. Raise the wiper arm and turn the wiper  
blade assembly to expose the plastic  
locking clip.  
CAUTION  
Do not allow the wiper arm to fall  
against the windshield, since it may  
chip or crack the windshield.  
CAUTION  
Do not allow the wiper arm to fall  
against the windshield, since it may  
chip or crack the windshield.  
1JBA7038  
2. Compress the clip and slide the blade  
assembly downward.  
3. Lift it off the arm.  
4. Install the blade assembly in the  
reverse order of removal.  
7 37  
Maintenance  
OEN076047  
OEN076048  
OED070112  
Type C  
2. Press the button and slide the blade  
assembly upward.  
3. Install the blade assembly in the  
reverse order of removal.  
4. Return the wiper arm on the wind-  
shield.  
1. Raise the wiper arm and turn the wiper  
blade assembly to expose the plastic  
locking clip.  
CAUTION  
Do not allow the wiper arm to fall  
against the windshield, since it may  
chip or crack the windshield.  
7 38  
Maintenance  
OED070113  
OED070114  
OED076040  
G180202AFD-EA  
2. Open the cover of the blade.  
3. Compress the clip behind the wiper  
arm and lift it off the arm.  
4. Install the blade assembly until it clicks  
into place.  
Rear window wiper blade  
(if equipped)  
1. Raise the wiper arm and pull out the  
wiper blade assembly.  
5. Close the cover of blade.  
6. Place back the wiper arm to the prop-  
er position.  
7 39  

Related Topics

Popular Owner Manuals