2021-2026 Hyundai Ioniq SUV Emergency situations User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Emergency situations for Your Hyundai Ioniq SUV First Generation (2021-2026)

8.Emergency situations  
Hazard warning flasher..................................................................................... 8-2  
In case of an emergency whilst driving........................................................... 8-2  
If the vehicle stalls whilst driving................................................................................8-2  
If the vehicle stalls at a crossroad or crossing ...........................................................8-2  
If you have a flat tyre whilst driving ............................................................................8-3  
If the vehicle will not start................................................................................ 8-3  
Confirm the EV battery is not low on the charge gauge ...........................................8-3  
Jump starting (12V battery)..............................................................................8-4  
Tyre Pressure Monitoring System (TPMS)........................................................8-7  
Check tyre pressure .....................................................................................................8-7  
Tyre pressure monitoring system............................................................................... 8-8  
Low tyre pressure warning light................................................................................. 8-9  
Low tyre pressure position and tyre pressure telltale............................................... 8-9  
TPMS (Tyre Pressure Monitoring System) malfunction indicator ...........................8-10  
Changing a tyre with TPMS .......................................................................................8-10  
If you have a flat tyre (with Tyre Mobility Kit).................................................8-12  
Introduction................................................................................................................ 8-12  
Notes on the safe use of the Tyre Mobility Kit.......................................................... 8-13  
Components of the Tyre Mobility Kit ........................................................................ 8-14  
Using the Tyre Mobility Kit When a tyre is flat.......................................................... 8-15  
How to adjust tyre pressure ...................................................................................... 8-18  
Towing ..............................................................................................................8-19  
Towing service............................................................................................................ 8-19  
Removable towing hook........................................................................................... 8-20  
Emergency commodity...................................................................................8-21  
Fire extinguisher......................................................................................................... 8-21  
First aid kit .................................................................................................................. 8-21  
Triangle reflector ........................................................................................................ 8-21  
Tyre pressure gauge................................................................................................... 8-21  
8
Emergency situations  
HAZARD WARNING  
FLASHER  
IN CASE OF AN EMERGENCY  
WHILST DRIVING  
If the vehicle stalls whilst driving  
śꢀ Reduce your speed gradually, keeping  
a straight line. Move cautiously off the  
road to a safe place.  
śꢀ Turn on your hazard warning flasher.  
śꢀ Try to start the vehicle again. If your  
vehicle will not start, we recommend  
that you contact an authorised  
HYUNDAI dealer or seek other  
qualified assistance.  
ONE1081001  
If the vehicle stalls at a crossroad  
or crossing  
If the vehicle stalls at a crossroads or  
crossing, if safe to do so, shift the gear to  
N (Neutral) and then push the vehicle to  
a safe location.  
To stay N (Neutral) whilst the vehicle is  
off, refer to ‘To stay in N (Neutral) when  
vehicle is OFF’ in chapter 6.  
The hazard warning flasher serves as  
a warning to other drivers to exercise  
extreme caution when approaching,  
overtaking, or passing your vehicle.  
It should be used whenever emergency  
repairs are being made or when the  
vehicle is stopped near the edge of a  
roadway.  
To turn the hazard warning flasher on  
or off, press the hazard warning flasher  
button with the Start/Stop button in any  
position. The hazard warning flasher  
button is located in the centre fascia  
panel. All turn signal lights will flash  
simultaneously.  
śꢀ The hazard warning flasher operates  
regardless of whether your vehicle is  
running or not.  
śꢀ The turn signals do not work when the  
hazard flasher is on.  
8-2  
08  
IF THE VEHICLE WILL NOT  
START  
If you have a flat tyre whilst  
driving  
If a tyre goes flat whilst you are driving:  
Confirm the EV battery is not low  
on the charge gauge  
śꢀ Take your foot off the accelerator  
pedal and let the vehicle slow down  
whilst driving straight ahead. Do  
not apply the brakes immediately or  
attempt to pull off the road as this  
may cause loss of vehicle control  
resulting in an accident. When the  
vehicle has slowed to such a speed  
that it is safe to do so, brake carefully  
and pull off the road. Drive off the  
road as far as possible and park on  
firm, level ground. If you are on a  
divided highway, do not park in the  
median area between the two traffic  
lanes.  
śꢀ Be sure the gear is in P (Park). The  
vehicle starts only when the gear is in  
P (Park).  
śꢀ Check the 12-volt battery connections  
to be sure they are clean and tight.  
śꢀ Turn on the interior light. If the light  
dims or goes out when you operate  
the starter, the 12V battery is drained.  
Do not push or pull the vehicle to start it.  
This could cause damage to your vehicle.  
śꢀ When the vehicle is stopped, press the  
hazard warning flasher button, shift  
the gear to P (Park), apply the parking  
brake, and press the Start/Stop button  
to the OFF position.  
śꢀ Have all passengers get out of the  
vehicle. Be sure they all get out on the  
side of the vehicle that is away from  
traffic.  
śꢀ When changing a flat tyre, follow  
the instructions provided later in this  
chapter.  
8-3  
Emergency situations  
-803ꢀ67$57,1*ꢀǣꢁꢂ9ꢀ%$77(5<Ǥ  
Jump starting can be dangerous if done  
incorrectly. Follow the jump starting  
procedure in this section to avoid serious  
injury or damage to your vehicle. If in  
doubt about how to properly jump start  
your vehicle, we strongly recommend  
that you have a service technician or  
towing service do it for you.  
If acid gets into your eyes, flush your  
eyes with clean water for at least 15  
minutes and get immediate medical  
attention. If acid gets on your skin,  
thoroughly wash the area. If you feel  
pain or a burning sensation, get medical  
attention immediately.  
śꢀ When lifting a plastic-cased battery,  
excessive pressure on the case may  
cause battery acid to leak. Lift with a  
battery carrier or with your hands on  
opposite corners.  
WARNING  
To prevent SERIOUS INJURY or DEATH  
to you or bystanders, always follow  
these precautions when working near  
or handling the battery:  
śꢀ Do not attempt to jump start your  
vehicle if your battery is frozen.  
śꢀ NEVER attempt to recharge the  
battery when the vehicle’s battery  
cables are connected to the battery.  
Always read and follow  
instructions carefully when  
handling a battery.  
śꢀ The electrical ignition system works  
with high voltage.  
Wear eye protection designed  
to protect the eyes from acid  
splashes.  
NEVER touch these components  
with the vehicle running or when  
the Start/Stop button is in the ON  
position.  
Keep all flames, sparks, or  
smoking materials away from  
the battery.  
śꢀ The electrical ignition system works  
with high voltage. NEVER touch  
these components with the (  
)
indicator ON or when the START/  
STOP button is in the ON position.  
Hydrogen is always present  
in battery cells, is highly  
combustible, and may explode  
if ignited.  
Keep batteries out of reach of  
children.  
śꢀ Do not allow the (+) and (-) jumper  
cables to touch. It may cause sparks.  
śꢀ The battery may rupture or explode  
when you jump start with a low or  
frozen battery.  
śꢀ Do not directly connect the (-) to the  
jump cable. Connect the (-) to the  
one of the metallic parts located far  
from the jump cable in the vehicle.  
The direct (-) connection to the jump  
cable may cause an explosion.  
Batteries contain sulphuric  
acid which is highly corrosive.  
Do not allow acid to contact  
your eyes, skin or clothing.  
śꢀ Be sure to use only 12V battery to  
jump start. Using batteries with other  
voltages to jump start can damage  
the battery or even provoke an  
explosion.  
8-4  
08  
Jump starting procedure  
Information  
When you jump start your vehicle,  
use the jumper terminal in the motor  
compartment.  
1. Position the vehicles close enough  
that the jumper cables will reach, but  
do not allow the vehicle body parts to  
contact.  
2. Avoid fans or any moving parts in the  
motor compartment at all times, even  
when the vehicles are turned off.  
3. Turn off all electrical devices such as  
radios, lights, air conditioning, etc.  
Put the vehicles in P (Park) and set the  
parking brake. Turn both vehicles OFF.  
4. Open the bonnet.  
5. Remove the battery cover located  
inside of the front boot.  
6. Remove the motor compartment fuse  
box cover.  
ONE1081003  
7. Connect the jumper cables in  
the exact sequence shown in the  
illustration. First connect one jumper  
cable to the red, positive (+) jumper  
terminal of your vehicle (1).  
8. Connect the other end of the jumper  
cable to the red, positive (+) battery/  
jumper terminal of the assisting  
vehicle (2).  
9. Connect the second jumper cable to  
the black, negative (-) battery/jumper  
terminal of the assisting vehicle (3).  
10. Connect the other end of the second  
jumper cable to the black, negative (-)  
chassis ground of your vehicle (4).  
CAUTION  
Do not allow the jumper cables to  
contact anything except the correct  
battery or jumper terminals or the  
correct ground. Do not lean over the  
battery when making connections.  
Before jump starting, make sure to  
correctly identify the positive (+) and  
negative (-) terminals to avoid reverse  
polarity connections.  
WARNING  
Do not connect the jumper cable to  
the negative (-) jumper terminal of the  
discharged battery. A spark could cause  
the battery to explode and lead to a  
personal injury or vehicle damage.  
8-5  
Emergency situations  
11. Start the assisting vehicle and let  
it run at approximately for a few  
minutes. Then start your vehicle.  
12. Keep your vehicle operating for at  
least 30 minutes at idle or driving to  
assure your battery receives enough  
charge to be able to start on its  
Information  
An inappropriately disposed  
battery can be harmful to  
the environment and human  
health. Dispose of the battery  
according to your local law(s) or  
regulations.  
own after the vehicle is shut off. A  
completely discharged battery may  
require as long as 60 minutes runtime  
to fully recharge it. If the vehicle is run  
for less, the battery may not restart.  
NOTICE  
To prevent damage to your vehicle:  
śꢀ Only use a 12-volt power supply  
(battery or jumper system) to jump  
start your vehicle.  
If your vehicle will not start after a few  
attempts, it probably requires service.  
In this event please seek qualified  
assistance. If the cause of your battery  
discharging is not apparent, we  
recommend that you have your vehicle  
checked by an authorised HYUNDAI  
dealer.  
śꢀ Do not attempt to jump start your  
vehicle by push-starting.  
śꢀ Always be sure that the battery  
cover and cable are tightened after  
finishing jump start your vehicle.  
Otherwise is may cause damage to  
the relevant parts, noise trouble, or  
entrance of foreign substances.  
Disconnect the jumper cables in the  
exact reverse order you connected them:  
1. Disconnect the jumper cable from the  
black, negative (-) chassis ground of  
your vehicle (4).  
2. Disconnect the other end of the  
jumper cable from the black, negative  
(-) battery/chassis ground of the  
assisting vehicle (3).  
CAUTION  
Whilst jump starting your vehicle, avoid  
the positive (+) and negative (-) cables  
to come in contact. A spark could cause  
personal injury.  
3. Disconnect the second jumper cable  
from the red, positive (+) battery/  
jumper terminal of the assisting  
vehicle (2).  
4. Disconnect the other end of the  
jumper cable from the red, positive (+)  
jumper terminal of your vehicle (1).  
8-6  
08  
7<5(ꢀ35(6685(ꢀ021,725,1*ꢀ6<67(0ꢀǣ7306Ǥ  
Check tyre pressure  
ONE1081004R  
ONE1041010L  
śꢀ You can check the tyre pressure in the  
Utility view on the cluster.  
Refer to the “View Modes” section in  
chapter 4.  
śꢀ Tyre pressure is displayed after a few  
minutes of driving after initial vehicle  
start up.  
śꢀ If tyre pressure is not displayed when  
the vehicle is stopped, ‘Drive to  
display’ message will appear. After  
driving, check the tyre pressure.  
śꢀ The displayed tyre pressure values  
may differ from those measured with  
a tyre pressure gauge.  
śꢀ You can change the tyre pressure  
unit from the Settings menu in the  
infotainment system screen. Select:  
ONE1081005L  
(1) Low Tyre Pressure Telltale/TPMS  
Malfunction Indicator  
(2) Low Tyre Pressure Position Telltale  
and Tyre Pressure Telltale (Shown on  
the LCD display)  
- 6HWXSꢀƟꢀ*HQHUDOꢀ6HWWLQJVꢀƟꢀ8QLWꢀƟꢀ  
7\UHꢀ$LUꢀ3UHVVXUHꢀ8QLWꢀƟꢀSVLꢁN3DꢁEDU  
For detailed information, refer to the  
separately supplied infotainment  
system manual.  
8-7  
Emergency situations  
Your vehicle has also been equipped with  
a TPMS malfunction indicator to indicate  
when the system is not operating  
properly. The TPMS malfunction  
Tyre pressure monitoring system  
WARNING  
indicator is combined with the low  
tyre pressure telltale. When the system  
detects a malfunction, the telltale will  
flash for approximately one minute and  
then remain continuously illuminated.  
This sequence will continue upon  
subsequent vehicle start-ups as long as  
the malfunction exists.  
When the malfunction indicator is  
illuminated, the system may not be able  
to detect or signal low tyre pressure as  
intended. TPMS malfunctions may occur  
for a variety of reasons, including the  
installation of replacement or alternate  
tyres or wheels on the vehicle that  
prevent the TPMS from functioning  
properly.  
Over-inflation or under-inflation can  
reduce tyre life, adversely affect vehicle  
handling, and lead to sudden tyre  
failure that may cause loss of vehicle  
control resulting in an accident.  
Each tyre, including the spare (if  
provided), should be checked monthly  
when cold and inflated to the inflation  
pressure recommended by the vehicle  
manufacturer on the vehicle placard  
or tyre inflation pressure label. (If your  
vehicle has tyres of a different size  
than the size indicated on the vehicle  
placard or tyre inflation pressure label,  
you should determine the proper tyre  
inflation pressure for those tyres.)  
Always check the TPMS malfunction  
telltale after replacing one or more tyres  
or wheels on your vehicle to ensure that  
the replacement or alternate tyres and  
wheels allow the TPMS to continue to  
function properly.  
As an added safety feature, your  
vehicle has been equipped with a tyre  
pressure monitoring system (TPMS)  
that illuminates a low tyre pressure  
telltale when one or more of your tyres is  
significantly under-inflated. Accordingly,  
when the low tyre pressure telltale  
illuminates, you should stop and check  
your tyres as soon as possible, and inflate  
them to the proper pressure. Driving on  
a significantly under-inflated tyre causes  
the tyre to overheat and can lead to tyre  
failure.  
NOTICE  
If any of the below happens, we  
recommend that you have the system  
checked by an authorised HYUNDAI  
dealer.  
1. The Low Tyre Pressure Telltale/ TPMS  
Malfunction Indicator does not  
illuminate for 3 seconds when the  
Start/Stop button is pressed to the  
ON position or when the vehicle is  
running.  
2. The TPMS Malfunction Indicator  
remains illuminated after blinking for  
approximately 1 minute.  
Under-inflation also reduces fuel  
efficiency and tyre tread life, and  
may affect the vehicle’s handling and  
stopping ability.  
Please note that the TPMS is not a  
substitute for proper tyre maintenance,  
and it is the driver’s responsibility to  
maintain correct tyre pressure, even if  
under-inflation has not reached the level  
to trigger illumination of the TPMS low  
tyre pressure telltale.  
3. The Low Tyre Pressure Position  
Telltale remains illuminated.  
8-8  
08  
If you cannot reach a service station or  
Low tyre pressure  
warning light  
if the tyre cannot hold the newly added  
air, replace the low pressure tyre with the  
spare tyre.  
Low tyre pressure position and  
tyre pressure telltale  
The Low Tyre Pressure Telltale will remain  
on and the TPMS Malfunction Indicator  
may blink for one minute and then  
remain illuminated (when the vehicle  
is driven approximately 10 minutes at  
speed above 25 km/h) until you have the  
low pressure tyre repaired and replaced  
on the vehicle.  
CAUTION  
In winter or cold weather, the Low Tyre  
Pressure Telltale may be illuminated if  
the tyre pressure was adjusted to the  
recommended tyre inflation pressure  
in warm weather. It does not mean  
your TPMS is malfunctioning because  
the decreased temperature leads to a  
proportional lowering of tyre pressure.  
When you drive your vehicle from a  
warm area to a cold area or from a cold  
area to a warm area, or the outside  
temperature is greatly higher or lower,  
you should check the tyre inflation  
pressure and adjust the tyres to the  
recommended tyre inflation pressure.  
ONE1081021L  
When the tyre pressure monitoring  
system warning indicators are  
illuminated and a warning message  
displayed on the cluster LCD display,  
one or more of your tyres is significantly  
under-inflated. The Low Tyre Pressure  
Position Telltale will indicate which  
tyre is significantly underinflated by  
illuminating the corresponding parking  
light.  
If either telltale illuminates, immediately  
reduce your speed, avoid hard cornering  
and anticipate increased stopping  
distances. You should stop and check  
your tyres as soon as possible. Inflate the  
tyres to the proper pressure as indicated  
on the vehicle’s placard or tyre inflation  
pressure label located on the driver’s  
side centre pillar outer panel.  
WARNING  
Low pressure damage  
Significantly low tyre pressure makes  
the vehicle unstable and can contribute  
to loss of vehicle control and increased  
braking distances.  
Continued driving on low pressure tyres  
can cause the tyres to overheat and fail.  
8-9  
Emergency situations  
TPMS (Tyre Pressure  
Changing a tyre with TPMS  
Monitoring System)  
If you have a flat tyre, the Low Tyre  
Pressure and Position telltales will come  
on. We recommend that the flat tyre  
be repaired by an authorised HYUNDAI  
dealer as soon as possible or replace the  
flat tyre with the spare tyre.  
malfunction indicator  
The TPMS Malfunction Indicator  
will illuminate after it blinks for  
approximately one minute when there  
is a problem with the Tyre Pressure  
Monitoring System.  
We recommend that the system be  
checked by an authorised HYUNDAI  
dealer as soon as possible.  
NOTICE  
It is recommended that you do not use a  
puncture-repairing agent not approved  
by an authorised HYUNDAI dealer or the  
equivalent specified for your vehicle  
to repair and/or inflate a low pressure  
tyre. Tyre sealant not approved by an  
authorised HYUNDAI dealer or the  
NOTICE  
If there is a malfunction with the TPMS,  
the Low Tyre Pressure Position Telltale  
will not be displayed even though the  
vehicle has an under-inflated tyre.  
equivalent specified for your vehicle  
may damage the tyre pressure sensor.  
NOTICE  
The spare tyre (if equipped) does not  
come with a tyre pressure monitoring  
sensor. When the low pressure tyre or  
the flat tyre is replaced with the spare  
tyre, the Low Tyre Pressure Telltale will  
remain on. Also, the TPMS Malfunction  
Indicator will illuminate after blinking  
for one minute if the vehicle is driven at  
speed above 25 km/h for approximately  
10 minutes.  
Once the original wheel equipped with  
a tyre pressure monitoring sensor is  
reinflated to the recommended pressure  
and reinstalled on the vehicle, the  
Low Tyre Pressure Telltale and TPMS  
Malfunction Indicator will go off within a  
few minutes of driving.  
The TPMS Malfunction Indicator may  
illuminate after blinking for one minute  
if the vehicle is near electric power  
supply cables or radio transmitters  
such as police stations, government  
and public offices, broadcasting  
stations, military installations, airports,  
transmitting towers, etc.  
Additionally, the TPMS Malfunction  
Indicator may illuminate if snow chains  
are used or electronic devices such as  
computers, chargers, remote starters,  
navigation, etc. This may interfere with  
normal operation of the TPMS.  
8-10  
08  
If the indicators do not extinguish after a  
few minutes we recommend to consult  
an authorised HYUNDAI dealer.  
Each wheel is equipped with a tyre  
pressure sensor mounted inside the tyre  
behind the valve stem (except for the  
spare tyre). You must use TPMS specific  
wheels. It is recommended that you  
always have your tyres serviced by an  
authorised HYUNDAI dealer.  
You may not be able to identify a tyre  
with low pressure by simply looking at it.  
Always use a good quality tyre pressure  
gauge to measure. Please note that a  
tyre that is hot (from being driven) will  
have a higher pressure measurement  
than a tyre that is cold.  
WARNING  
Tampering with, modifying, or disabling  
the Tyre Pressure Monitoring System  
(TPMS) components may interfere  
with the system’s ability to warn the  
driver of low tyre pressure conditions  
and/or TPMS malfunctions. Tampering  
with, modifying, or disabling the Tyre  
Pressure Monitoring System (TPMS)  
components may void the warranty for  
that portion of the vehicle.  
Information  
A cold tyre means the vehicle has been  
sitting for 3 hours and driven for less  
than 1.6 km in that 3 hour period.  
Allow the tyre to cool before measuring  
the inflation pressure. Always be sure  
the tyre is cold before inflating to the  
recommended pressure.  
ONE1081026  
WARNING  
For 20 inches wheel, take out the remover  
tool (1) in the Tyre Mobility Kit. Insert  
the tool to the hole and pull out the wheel  
cover.  
śꢀ The TPMS cannot alert you to severe  
and sudden tyre damage caused by  
external factors such as nails or road  
debris.  
śꢀ If you feel any vehicle instability,  
immediately take your foot off  
the accelerator, apply the brakes  
gradually with light force, and slowly  
move to a safe position off the road.  
8-11  
Emergency situations  
,)ꢀ<28ꢀ+$9(ꢀ$ꢀ)/$7ꢀ7<5(ꢀǣ:,7+ꢀ7<5(ꢀ02%,/,7<ꢀ.,7ꢃꢀ  
,)ꢀ(48,33('Ǥ  
Introduction  
With the Tyre Mobility Kit you stay mobile  
even after experiencing a tyre puncture.  
The compressor and sealing compound  
system effectively and comfortably seals  
most punctures in a passenger car tyre  
caused by nails or similar objects and  
reinflates the tyre.  
After you ensure that the tyre is properly  
sealed you can drive cautiously on the  
tyre (distance up to 200 km) at a max.  
speed of 80 km/h in order to reach a  
service station or tyre dealer for the tyre  
replacement.  
It is possible that some tyres, especially  
with larger punctures or damage to the  
sidewall, cannot be sealed completely.  
ONE1081029  
For safe operation, carefully read and  
follow the instructions in this manual  
before use.  
(1) Compressor  
(2) Sealant bottle  
The tyre mobility kit is a temporary fix  
to the tyre we recommend the tyre be  
inspected by an authorised HYUNDAI  
dealer or the equivalent approved for  
your vehicle as soon as possible.  
Air pressure loss in the tyre may  
adversely affect tyre performance.  
For this reason, you should avoid abrupt  
steering or other driving manoeuvres,  
especially if the vehicle is heavily loaded  
or if a trailer is in use.  
The Tyre Mobility Kit is not designed  
or intended as a permanent tyre repair  
method and is to be used for one tyre  
only.  
This instruction shows you step by step  
how to temporarily seal the puncture  
simply and reliably.  
CAUTION  
When two or more tyres are flat, do not  
use the tyre mobility kit because the  
sealant provided with the Tyre Mobility  
Kit must be used for only one flat tyre.  
WARNING  
Do not use the Tyre Mobility Kit to repair  
punctures in the tyre walls. This can  
result in an accident due to tyre failure.  
Read the section “Notes on the safe use  
of the Tyre Mobility Kit”.  
WARNING  
Have your tyre repaired as soon as  
possible. The tyre may lose air pressure  
at any time after inflating with the Tyre  
Mobility Kit.  
8-12  
08  
śꢀ Never leave the Tyre Mobility Kit  
WARNING  
Do not use the TMK if a tyre is severely  
damaged by driving run flat or with  
insufficient air pressure.  
Only punctured areas located within the  
tread region of the tyre can be sealed  
using the TMK.  
unsupervised whilst it is being used.  
śꢀ Do not leave the compressor running  
for more than 10 min. at a time or it  
may overheat.  
śꢀ Do not use the Tyre Mobility Kit if the  
ambient temperature is below -30°C  
(-22°F).  
śꢀ In case of skin contact with the  
sealant, wash the area thoroughly  
with plenty of water. If the irritation  
persists, seek medical attention.  
śꢀ In case of eye contact with the  
sealant, flush your eyes for at least 15  
minutes. If the irritation persists, seek  
medical attention.  
śꢀ In case of swallowing the sealant,  
rinse the mouth and drink plenty of  
water. However, never give anything  
to an unconscious person and seek  
medical attention immediately.  
śꢀ Long time exposure to the sealant  
may cause damage to bodily tissue  
such as kidney, etc.  
Notes on the safe use of the Tyre  
Mobility Kit  
śꢀ Park your car at the side of the road  
so that you can work with the Tyre  
Mobility Kit away from moving traffic.  
śꢀ To be sure your vehicle will not move,  
even when you’re on fairly level  
ground, always set your parking brake.  
śꢀ Only use the Tyre Mobility Kit for  
sealing/inflation passenger car tyres.  
Only punctured areas located within  
the tread region of the tyre can be  
sealed using the tyre mobility kit.  
śꢀ Do not use on motorcycles, bicycles  
or any other type of tyres.  
śꢀ When the tyre and wheel are  
damaged, do not use Tyre Mobility Kit  
for your safety.  
śꢀ Use of the Tyre Mobility Kit may not be  
effective for tyre damage larger than  
approximately 6 mm (0.24 in).  
śꢀ If the tyre cannot be made roadworthy  
with the Tyre Mobility Kit, we  
recommend that you contact an  
authorised HYUNDAI dealer.  
śꢀ Do not use the Tyre Mobility Kit if a  
tyre is severely damaged by driving  
run flat or with insufficient air  
pressure.  
śꢀ Do not remove any foreign objects  
such as nails or screws that have  
penetrated the tyre.  
śꢀ Provided the car is outdoors, leave the  
Vehicle is ON (  
indicator ON).  
Otherwise operating the compressor  
may eventually drain the car battery.  
8-13  
Emergency situations  
Components of the Tyre Mobility Kit  
ONE1081030  
1. Speed-restriction label  
2. Sealant bottle and label with speed restriction  
3. Filling hose  
4. Connectors and cable for the power outlet direct connection  
5. Holder for the sealant bottle  
6. Compressor  
7. ON/OFF switch  
8. Pressure gauge for displaying the tyre inflation pressure  
9. Button for reducing the tyre inflation pressure  
Connectors, cable and connection hose are stored in the compressor housing.  
Strictly follow the specified sequence, otherwise the sealant may escape under high  
pressure.  
WARNING  
Expired sealant  
Do not use the Tyre sealant after the sealant has expired (for example, pasted the  
expiration date on the sealant container). This can increase the risk of tyre failure.  
8-14  
08  
1. Shake the sealant bottle (2).  
WARNING  
Sealant  
śꢀ Keep out of reach of children.  
śꢀ Avoid contact with eyes.  
śꢀ Do not swallow.  
Using the Tyre Mobility Kit When  
a tyre is flat  
CAUTION  
ONE1081031  
2. Connect the filling hose (3) to the  
sealant bottle (2) in the direction of (A)  
and connect the sealant bottle to the  
compressor (6) in the direction of (B).  
3. Ensure that the compressor is  
switched OFF.  
4. Unscrew the valve cap from the valve  
of the defective wheel and screw the  
filling hose (3) of the sealant bottle  
onto the valve.  
ONE1081008R  
Detach the speed restriction label (1)  
from the sealant bottle (2), and place  
it in a highly visible place inside the  
vehicle such as on the steering wheel to  
remind the driver not to drive too fast.  
CAUTION  
If only the tyre pressure needs to be  
adjusted, refer to “How to Adjust Tyre  
Pressure” in this chapter.  
ONE1081009  
Before using the Tyre Mobility Kit, be  
fully aware of the explanation on the  
sealant.  
CAUTION  
Securely install the sealant filling hose  
to the valve. If not, sealant may flow  
rearward, possibly clogging the filling  
hose.  
8-15  
Emergency situations  
7. Switch off the compressor.  
8. Detach the hoses from the sealant  
bottle connector and from the tyre  
valve.  
Return the Tyre Mobility Kit to its storage  
location in the vehicle.  
ONE1081010R  
5. Plug the compressor power cord (4)  
into the vehicle power outlet.  
NOTICE  
Only use the front passenger side  
power outlet when connecting the  
power cord.  
OLMF064106  
9. Immediately drive approximately 7~10  
km (about 10min) to evenly distribute  
the sealant in the tyre.  
Do not exceed a speed of 80 km/h. If  
possible, do not fall below a speed of 20  
km/h.  
Whilst driving, if you experience any  
unusual vibration, ride disturbance or  
noise, reduce your speed and drive with  
caution until you can safely pull off of the  
side of the road.  
6. With the vehicle ON  
(
indicator ON), switch on  
the compressor and let it run for  
approximately 5~7 minutes to fill the  
sealant up to proper pressure. (refer  
to the Tyre and Wheels, chapter 2).  
The inflation pressure of the tyre  
after filling is unimportant and will be  
checked/corrected later.  
Be careful not to overinflate the tyre  
and stay away from the tyre when  
filling it.  
Call for road side service or towing.  
CAUTION  
Tyre pressure  
Do not attempt to drive your vehicle if  
the tyre pressure is below 200 kPa (29  
psi). This could result in an accident due  
to sudden tyre failure.  
8-16  
08  
NOTICE  
Do not let the compressor run for more  
than 10 minutes, otherwise the device  
will overheat and may be damaged.  
Information  
The pressure gauge may show higher than  
actual reading when the compressor is  
running. To get an accurate tyre reading,  
the compressor needs to be turned off.  
OIGH067043  
CAUTION  
If the inflation pressure is not  
maintained, drive the vehicle a second  
time, refer to step 9.  
Then repeat steps 10 to 13.  
Use of the TMK may be ineffectual for  
tyre damage larger than approximately  
4 mm.  
We recommend that you contact an  
authorised HYUNDAI dealer if the tyre  
cannot be made roadworthy with the  
Tyre Mobility Kit.  
ONE1081009  
10. After driving approximately 7~10  
km (about 10 min), stop at a safety  
location.  
11. Connect the filling hose (3) of the  
compressor directly to the tyre valve.  
12. Plug the compressor power cord into  
the vehicle power outlet.  
13. Adjust the tyre inflation pressure to  
the recomended tyre inflation.  
WARNING  
The tyre inflation pressure must be at  
least 220 kPa (32 psi). If it is not, do not  
continue driving.  
Call for road side service or towing.  
With the Vehicle is ON  
CAUTION  
Tyre pressure sensor (if equipped with  
TPMS)  
The sealant on the tyre pressure sensor  
and wheel should be removed when  
you replace the tyre with a new one and  
inspect the tyre pressure sensors. We  
recommend that you get this done at an  
authorised HYUNDAI dealer.  
(
indicator ON) proceed as  
follows.  
- To increase the inflation pressure  
: Switch on the compressor. To  
check the current inflation pressure  
setting, briefly switch off the  
compressor.  
- To reduce the inflation pressure:  
Press the button (9) on the  
compressor.  
8-17  
Emergency situations  
4. Adjust the tyre inflation pressure to  
the recomended tyre inflation.  
Information  
When reinstalling the repaired or replaced  
tyre and wheel on the vehicle, tighten  
the wheel lug nut to 11~13 kgf·m (79~94  
lbf·ft).  
With the Vehicle is ON  
(
indicator ON), proceed as  
follows.  
- To increase the inflation pressure  
: Switch on the compressor. To  
check the current inflation pressure  
setting, briefly switch off the  
compressor.  
How to adjust tyre pressure  
- To reduce the inflation pressure:  
Press the button (9) on the  
compressor.  
NOTICE  
Do not let the compressor run for more  
than 10 minutes, otherwise the device  
will overheat and may be damaged.  
OIGH067043  
Information  
śꢀ The pressure gauge may show  
higher than actual reading when the  
compressor is running. To get an  
accurate tyre reading, the compressor  
needs to be turned off.  
śꢀ When reinstalling the repaired or  
replaced tyre and wheel on the vehicle,  
tighten the wheel lug nut to 11~13kgf·m  
(79~94 lbf·ft).  
ONE1081009  
1. Park your vehicle in a safe location.  
2. Connect the filling hose (3) of the  
compressor directly to the tyre valve.  
3. Plug the compressor power cord into  
the vehicle power outlet.  
CAUTION  
Do not use the sealant when the tyre  
pressure only needs to be adjusted.  
WARNING  
The tyre inflation pressure must be at  
least 220 kPa (32 psi). If it is not, do not  
continue driving.  
Call for road side service or towing.  
8-18  
08  
TOWING  
Precautions when moving a short  
distance before towing a vehicle  
Towing service  
Move short distances within 394 in. (10  
m) at a speed of 3 mph (5 km/h) or less  
only when loading on a tow truck or if  
the vehicle needs to be repositioned.  
At this time, the gear must be in the ‘N’  
(neutral) position and the parking brake  
must be released. If it is impossible to  
operate the transmission and parking  
brake, move the vehicle with the rear  
wheel lifted.  
NOTICE  
Do not lift the vehicle by the tow fitting  
or body and chassis parts. Otherwise  
the vehicle may be damaged.  
ONE1081011JP  
[A] : Dollies  
CAUTION  
śꢀ Do not tow the vehicle with the rear  
wheels on the ground as this may  
cause damage to the vehicle.  
If emergency towing is necessary,  
we recommend having it done by  
an authorised HYUNDAI dealer or a  
commercial tow-truck service.  
Proper lifting and towing procedures  
are necessary to prevent damage to  
the vehicle. The use of wheel dollies or  
flatbed is recommended.  
For 2WD vehicles, it is acceptable to tow  
the vehicle with the front wheels on the  
ground (without dollies) and the rear  
wheels off the ground.  
ONE1081014  
śꢀ Do not tow with sling-type  
equipment. Use wheel lift or flatbed  
equipment.  
If any of the loaded wheels or suspension  
components are damaged or the vehicle  
is being towed with the rear wheels on  
the ground, use a towing dolly under the  
rear wheels.  
When being towed by a commercial tow  
truck and wheel dollies are not used,  
the rear of the vehicle should always be  
lifted, not the front.  
ONE1081015JP  
For AWD vehicles, it must be towed  
with a wheel lift and dollies or flatbed  
equipment with all the wheels off the  
ground.  
8-19  
Emergency situations  
„ꢀRear  
When towing your vehicle in an  
emergency without wheel dollies:  
1. Whilst depressing the brake pedal  
shift to the N (Neutral) position and  
turn the vehicle off. The START/STOP  
button will be in the ACC position.  
2. Release the parking brake.  
CAUTION  
Failure to shift the gear to N (Neutral)  
may cause internal damage to the  
reduction gear.  
ONE1081017  
śꢀ Push the upper part of the bumper  
hole cover.  
śꢀ Pull the lower part of the bumper hole  
Removable towing hook  
1. Open the tailgate, and remove the  
towing hook from the tool case.  
cover.  
3. Install the towing hook by turning it  
clockwise into the hole until it is fully  
secured.  
2. Remove the hole cover.  
4. Remove the towing hook and install  
the cover after use.  
„ꢀFront  
NOTICE  
Failure to properly tighten the towing  
hook may result in vehicle damage and  
deformation of related parts.  
CAUTION  
Make sure the towing hook is tighten  
properly. If not, during towing the  
towing hook may be thrown off the  
vehicle resulting in serious injury or  
accident.  
ONE1081016  
śꢀ Push the lower part of the bumper  
hole cover.  
8-20  
08  
(0(5*(1&<ꢀ&2002',7<ꢀǣ,)ꢀ(48,33('Ǥ  
Your vehicle is equipped with emergency  
First aid kit  
commodities to help you respond to  
Supplies for use in giving first aid such  
emergency situation.  
as scissors, bandage and adhesive tape,  
etc., are provided.  
Fire extinguisher  
Triangle reflector  
NOTICE  
This vehicle is equipped with the  
powder-type fire extinguisher  
Place the triangle reflector on the road  
to warn oncoming vehicles during  
emergencies, such as when the vehicle is  
parked by the roadside due to problems.  
exclusively for the fire caused by the  
electricity in the vehicle. Using water  
or other inappropriate fire extinguisher  
may cause the electric shock and  
collateral damage. If the fire cannot  
be controlled by the fire extinguisher  
equipped in the vehicle, avoid  
approaching to the fire and call fire  
station. Make sure to announce that the  
fire is caused by the electric vehicle.  
Tyre pressure gauge (if  
equipped)  
Tyres normally lose some air in day-to-  
day use, and you may have to add a air  
periodically and usually it is not a sign  
of a leaking tyre, but of normal wear.  
Always check tyre pressure when the  
tyres are cold because tyre pressure  
increases with temperature.  
If there is small fire and you know how  
to use the fire extinguisher, follow these  
steps carefully.  
1. Pull out the safety pin at the top of the  
extinguisher that keeps the handle  
from being accidentally pressed.  
2. Aim the nozzle towards the base of  
the fire.  
3. Stand approximately 2.5 m (8 ft) away  
from the fire and squeeze the handle  
to discharge the extinguisher. If you  
release the handle, the discharge will  
stop.  
To check the tyre pressure, take the  
following steps:  
1. Unscrew the inflation valve cap that is  
located on the rim of the tyre.  
2. Press and hold the gauge against the  
tyre valve. Some air will leak as you  
begin and more will leak if you don’t  
press the gauge in firmly.  
3. A firm non-leaking push will activate  
the gauge.  
4. Read the tyre pressure on the gauge  
to see whether the tyre pressure is low  
or high.  
5. Adjust the tyre pressure to the  
specified pressure. Refer to “Tyres and  
Wheels” section in chapter 2.  
4. Sweep the nozzle back and forth  
at the base of the fire. After the fire  
appears to be out, watch carefully  
since it may re-ignite.  
6. Reinstall the inflation valve cap.  
8-21  
Emergency situations  
WARNING  
śꢀ When an accident occur, park the  
vehicle to a safe place. To avoid the  
leak of electricity in high voltage  
battery, turn the vehicle off and pull  
the yellow label in the high voltage  
battery switch to shut down the high  
voltage battery. Also, disconnect the  
auxiliary battery(12V) cable to shut  
down. Be sure to disconnect both (+)  
cable and (-) cable.  
śꢀ Do not touch the exposed electric  
wires. Do not touch high voltage  
wires(orange), connectors and other  
electric components.  
śꢀ When an accident occur, the lethal  
gas and fluid from damaged high  
voltage battery can be leaked. Be  
aware not to touch or exposed to  
the gas and fluid. When flammable  
or poison gas leak inside the vehicle,  
open windows and evacuate to a  
safe place. When leaked fluid comes  
in contact with your eyes, flush your  
eyes with clean water. When the fluid  
contacts with your skin, wash it with  
salt water. Get immediate medical  
attention afterward.  
śꢀ When the vehicle is flooded,  
immediately turn the vehicle off and  
evacuate to a safe place. For your  
safety we recommend to call the fire  
station and or contact an authorised  
HYUNDAI dealer.  
śꢀ When the fire spread to the high  
voltage battery, the additional fire  
may occur. In this situation, be sure  
to accompany a fire truck when the  
vehicle is being towed.  
8-22  

Related Topics

Hazard warning flasher In case of an emergency whilst driving If the vehicle will not start If you have a flat tyre (with Tyre Mobility Kit, if equipped) Towing

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot