2016-2023 Hyundai Ix35 SUV Driving your vehicle -> Manual Transaxle User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving your vehicle -> Manual Transaxle for Your Hyundai Ix35 SUV Second Generation (2016-2023)

MANUAL TRANSAXLE  
To shift to R (Reverse), make sure  
the vehicle has completely stopped,  
and then move the shift lever to neu-  
tral before moving into R (Reverse).  
Manual transaxle operation  
The manual transaxle has 6 forward  
gears. The transaxle is fully synchro-  
nized in all forward gears so shifting  
to either a higher or a lower gear is  
easily accomplished.  
When you've come to a complete  
stop and it's hard to shift into 1st gear  
or R (Reverse):  
WARNING  
1.Put the shift lever in neutral and  
release the clutch pedal.  
Before leaving the driver’s  
seat, always make sure the  
shift lever is in 1st gear when  
the vehicle is parked on a  
uphill and in R (Reverse) on a  
downhill, set the parking  
brake, and place the ignition  
switch in the LOCK/OFF posi-  
tion. Unexpected vehicle  
movement may occur if these  
precautions are not followed.  
2.Depress the clutch pedal, and then  
shift into first or R (Reverse) gear.  
The shift lever can be moved without  
pulling up the ring (1).  
5
NOTICE  
The ring (1) must be pulled up while  
moving the shift lever.  
OLMB053009  
During cold weather, shifting may  
be difficult until the transaxle lubri-  
cant has warmed up.  
Do not use the engine brake  
(shifting from a high gear to  
lower gear) rapidly on slip-  
pery roads. The vehicle may  
slip causing an accident.  
5-19  
Driving your vehicle  
Using the clutch  
(Continued)  
CAUTION  
The clutch pedal should be  
depressed all the way to the floor  
before:  
To prevent possible damage  
to the clutch system, do not  
start with the 2nd (second)  
gear engaged except when  
you start on a slippery road.  
To prevent damage to the  
engine:  
- Starting the engine  
When downshifting from 5th  
gear to 4th gear, be careful not  
to inadvertently push the shift  
lever sideways engaging the  
2nd gear. A drastic downshift  
may cause the engine speed  
to increase to the point the  
tachometer will enter the red-  
zone.  
The engine will not start without  
depressing the clutch pedal.  
- Shifting  
Downshifting  
When releasing the clutch pedal,  
release it slowly. The clutch pedal  
should always be released while  
driving.  
Downshift when you must slow down  
in heavy traffic or drive up a steep hill  
to prevent engine load.  
Also, downshifting reduces the  
chance of stalling and can accelerate  
when you need to increase your  
speed again.  
Do not downshift more than 2  
gears or downshift the gear  
when the engine is running at  
high speed (5,000 RPM or  
higher). Such a downshifting  
may damage the engine,  
clutch and the transaxle.  
CAUTION  
To prevent unnecessary wear or  
damage to the clutch:  
When the vehicle is going downhill,  
downshifting helps maintain safe  
speed by providing brake power from  
the engine and enables less wear on  
the brakes.  
Do not rest your foot on the  
clutch pedal while driving.  
Do not hold the vehicle with  
the clutch on an incline, while  
waiting for the traffic light, etc.  
Always depress the clutch  
pedal down fully to prevent  
noise or damage.  
(Continued)  
5-20  
• Exercise extreme caution when  
driving on a slippery surface. Be  
especially careful when braking,  
accelerating or shifting gears. On a  
slippery surface, an abrupt change  
in vehicle speed can cause the  
drive wheels to lose traction and  
may cause loss of vehicle control  
resulting in an accident.  
Good driving practices  
(Continued)  
• Never take the vehicle out of gear  
and coast down a hill. This is  
extremely dangerous.  
The risk of rollover is greatly  
increased if you lose control  
of your vehicle at highway  
speeds.  
• Don't "ride" the brakes. This can  
cause the brakes and related parts  
to overheat and malfunction.  
Loss of control often occurs if  
two or more wheels drop off  
the roadway and the driver  
over steers to reenter the  
roadway.  
When you are driving down a long  
hill, slow down and shift to a lower  
gear. Engine braking will help slow  
down the vehicle.  
WARNING  
In the event your vehicle  
leaves the roadway, do not  
steer sharply. Instead, slow  
down before pulling back into  
the travel lanes.  
• Slow down before shifting to a  
lower gear. This will help avoid  
over-revving the engine, which can  
cause damage.  
To reduce the risk of SERIOUS  
INJURY or DEATH:  
5
ALWAYS wear your seatbelt.  
In a collision, an unbelted  
occupant is significantly more  
likely to be seriously injured  
or killed than a properly belt-  
ed occupant.  
• Slow down when you encounter  
cross winds. This gives you much  
better control of your vehicle.  
HYUNDAI recommends you  
follow all posted speed limits.  
• Be sure the vehicle is completely  
stopped before you shift into R  
(Reverse) to prevent damage to  
the transaxle.  
Avoid high speeds when cor-  
nering or turning.  
Do not make quick steering  
wheel movements, such as  
sharp lane changes or fast,  
sharp turns.  
(Continued)  
5-21  

Related Topics

Popular Owner Manuals