Maintenance
ENGINE OIL
Checking the engine oil level
1. Be sure the vehicle is on level 5. Pull the dipstick out again and
ground.
check the level. The level should
be between F and L.
■ Type A
2. Start the engine and allow it to
reach normal operating tempera-
ture.
CAUTION
3. Turn the engine off and wait for a
few minutes (about 5 minutes) for
the oil to return to the oil pan.
• Do not overfill the engine oil.
It may damage the engine.
• Do not spill engine oil, when
adding or changing engine
oil. If you drop the engine oil
on the engine room, wipe it off
immediately.
4. Pull the dipstick out, wipe it clean,
and re-insert it fully.
OLMB073096
■ Type B
WARNING
• When you wipe the oil level
gauge, you should wipe it with
a clean cloth. When mixed
with debris, it can cause
engine damage.
Radiator hose
Be very careful not to touch the
radiator hose when checking or
adding the engine oil as it may
be hot enough to burn you.
OLMB073095
■ Type C
OLMB073003
7-28
English 
