2016-2023 Hyundai Ix35 SUV Maintenance -> Wiper Blades User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Wiper Blades for Your Hyundai Ix35 SUV Second Generation (2016-2023)

Maintenance  
WIPER BLADES  
Blade inspection  
Contamination of either the wind-  
shield or the wiper blades with for-  
eign matter can reduce the effective-  
ness of the windshield wipers.  
Blade replacement  
When the wipers no longer clean  
adequately, the blades may be worn  
or cracked, and require replacement.  
Common sources of contamination  
are insects, tree sap, and hot wax  
treatments used by some commer-  
cial car washes. If the blades are not  
wiping properly, clean both the win-  
dow and the blades with a good  
cleaner or mild detergent, and rinse  
thoroughly with clean water.  
CAUTION  
To prevent damage to the wiper  
arms or other components, do  
not attempt to move the wipers  
manually.  
OLMB073019  
CAUTION  
CAUTION  
✽
NOTICE  
To prevent damage to the wiper  
blades, do not use gasoline,  
kerosene, paint thinner, or other  
solvents on or near them.  
The use of a non-specified  
wiper blade could result in  
wiper malfunction and failure.  
Commercial hot waxes applied by  
automatic car washes have been  
known to make the windshield diffi-  
cult to clean.  
7-44  
Front windshield wiper blade  
OLMB073021  
OLMB073098  
Type B  
OLMB073020  
1. Raise the wiper arm.  
Type A  
1. Raise the wiper arm and turn the  
wiper blade assembly to expose  
the plastic locking clip.  
CAUTION  
Do not allow the wiper arm to  
fall against the windshield,  
since it may chip or crack the  
windshield.  
CAUTION  
7
OLMB073022  
Do not allow the wiper arm to  
fall against the windshield,  
since it may chip or crack the  
windshield.  
2. Compress the clip and slide the  
blade assembly downward.  
3. Lift it off the arm.  
4. Install the blade assembly in the  
reverse order of removal.  
7-45  
Maintenance  
Rear window wiper blade  
OLMB073099  
OLMB073024  
2. Install the new blade assembly by  
inserting the center part into the  
slot in the wiper arm until it clicks  
into place.  
OLMB073023  
1. Raise the wiper arm and pull out  
the wiper blade assembly.  
3. Make sure the blade assembly is  
installed firmly by trying to pull it  
slightly.  
To prevent damage to the wiper arms  
or other components, we recom-  
mend that the wiper blade be  
replaced by an authoized HYUNDAI  
dealer.  
OLMB073100  
2. Lift up the wiper blade clip. Then  
pull down the blade assembly and  
remove it.  
3. Install the new blade assembly in  
the reverse order of removal.  
7-46  

Related Topics

Maintenance
Engine Compartment Maintenance Services Owner Maintenance Scheduled Maintenance Service Explanation of Maintenance Items Engine Oil Engine Coolant Brake/Clutch Fluid Power Steering Fluid Washer Fluid Parking Brake Fuel Filter (Diesel) Air Cleaner Climate Control Air Filter Battery Tires and Wheels Fuses Light Bulbs Appearance Care Emission Control System

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot