Get Multimedia System Guide for Hyundai Tucson SUV Third Generation (2016-2019)

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 1

Multimedia System

Multimedia system.................................................4-2

AUX, USB and iPod^®port ...............................................4-2

Antenna ...............................................................................4-3

Steering wheel audio control ........................................4-4

Audio / Video / Navigation system (AVN)..................4-5

Bluetooth^®Wireless Technology hands-free............4-5

How vehicle audio works ................................................4-6

System controllers and functions .....................4-15

Audio Head Unit

-RDS, Bluetooth equipped model................................4-15

-RDS, No Bluetooth equipped model.........................4-17

Setup ..................................................................................4-19

Radio : FM, AM................................................................4-28

DAB Radio (For DAB Model)........................................4-30

Basic Method of Use : USB / iPod^®/ My Music

-RDS, Bluetooth equipped model................................4-32

-RDS, No Bluetooth equipped model.........................4-32

Bluetooth^®Wireless Technology Audio ....................4-37

Voice Recognition ...........................................................4-41

4

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 2

Multimedia System

MULTIMEDIA SYSTEM

AUX, USB and iPod^®port

i

Information

• If you install an aftermarket HID

headlamp, your vehicle’s audio and

electronic device may malfunction.

When using a portable audio device

connected to the power outlet, noise

may occur during playback. If this

happens, use the power source of the

portable audio device.

• Prevent chemicals such as perfume,

cosmetic oil, sun cream, hand clean-

er, and air freshener from contacting

the interior parts because they may

cause damage or discoloration.

❈ iPod^®is a trademark of Apple Inc.

OTL045239L

You can use an AUX port to connect

audio devices and an USB port to plug

in an USB and also in an iPod^®port.

4-2

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 3

Shark fin antenna

Antenna

NOTICE

Roof antenna

• To prevent damage to the rear

glass antenna, never use sharp

instruments or window cleaner

containing abrasives to clean

the window. Clean the inside

surface of the rear glass window

with a piece of soft cloth.

• When putting a sticker on the

inside surface of the rear win-

dow, be careful not to damage to

the rear glass antenna.

4

OTLE045237

• Do not put sharp instruments

nearby the rear glass antenna.

OTLE045330

The shark fin antenna receives

transmitted data. (for example: GPS

and DAB signals)

The roof antenna receives both AM

and FM broadcast signals. Rotate

the roof antenna in a counterclock-

wise direction to remove it. Rotate it

in a clockwise direction to reinstall it.

• Tinted rear window may affect the

proper functioning of the antenna.

4-3

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 4

Multimedia System

VOLUME (VOL + / - ) (1)

Steering wheel audio control

(if equipped)

MODE ( ) (3)

• Move the VOLUME lever up to

increase volume.

Press the MODE button to select

Radio, Disc, or AUX.

• Move the VOLUME lever down to

decrease volume.

MUTE ( ) (4, if equipped)

• Press the button to mute the

sound.

SEEK/PRESET (

/

) (2)

If the SEEK/PRESET lever is moved

up or down and held for 0.8 second

or more, it will function in the follow-

ing modes.

• Press the button again to activate

the sound.

i

Information

RADIO mode

Detailed information for audio control

buttons are described in the following

pages in this chapter.

It will function as the AUTO SEEK

select button. It will SEEK until you

release the button.

MEDIA mode

It will function as the FF/REW button.

If the SEEK/PRESET lever is moved

up or down, it will function in the fol-

lowing modes.

OTL045500L

The steering wheel audio control but-

ton is installed for your convenience.

RADIO mode

It will function as the PRESET STA-

TION UP/DOWN button.

NOTICE

MEDIA mode

It will function as the TRACK UP/

DOWN button.

Do not operate audio remote con-

trol buttons simultaneously.

4-4

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 5

Bluetooth^®Wireless Technology hands-free (if equipped)

You can use the phone wirelessly by using the Bluetooth^®Wireless Technology.

Audio / Video / Navigation sys-

tem (AVN) (if equipped)

Detailed information for the AVN sys-

tem is described in a separately sup-

plied manual.

■ Type A

4

OTL045241

■ Type B

OTL045240

(1) Call / Answer button

(2) Call end button

OTL045262

(3) Microphone

• Audio : For detailed information, refer to “AUDIO” in this chapter.

• AVN : Detailed information for the Bluetooth^®Wireless Technology hands-

free is described in the manual supplied separately.

i

Make sure that your mobile phone system is up to date to assure proper function

Information

of bluetooth connection.

4-5

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 6

Multimedia System

This can be due to factors, such as

the distance from the radio station,

closeness of other strong radio sta-

tions or the presence of buildings,

bridges or other large obstructions in

the area.

How Vehicle Audio Works

FM reception

AM reception

JBM002

AM broadcasts can be received at

greater distances than FM broad-

casts. This is because AM radio

waves are transmitted at low fre-

quencies. These long distance, low

frequency radio waves can follow the

curvature of the earth rather than

travelling straight. In addition, they

curve around obstructions resulting

in better signal coverage.

JBM001

AM and FM radio signals are broad-

cast from transmitter towers located

around your city. They are intercept-

ed by the radio antenna on your vehi-

cle. This signal is then processed by

the radio and sent to your vehicle

speakers.

When a strong radio signal has

reached your vehicle, the precise

engineering of your audio system

ensures the best possible quality

reproduction. However, in some cases

the signal coming to your vehicle may

not be strong and clear.

4-6

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 7

FM radio station

4

JBM003

JBM004

JBM005

FM broadcasts are transmitted at • Fading - As your vehicle moves • Station Swapping - As an FM signal

high frequencies and do not bend to

follow the earth's surface. Because

of this, FM broadcasts generally

begin to fade within short distances

from the station. Also, FM signals are

easily affected by buildings, moun-

tains, and obstructions.This can lead

to undesirable or unpleasant listen-

ing conditions which might lead you

to believe a problem exists with your

radio. The following conditions are

normal and do not indicate radio

trouble:

away from the radio station, the sig-

nal will weaken and sound will

begin to fade. When this occurs, we

suggest that you select another

stronger station.

weakens, another more powerful

signal near the same frequency

may begin to play. This is because

your radio is designed to lock onto

the clearest signal. If this occurs,

select another station with

stronger signal.

a

• Flutter/Static - Weak FM signals or

large obstructions between the

transmitter and your radio can dis- • Multi-Path Cancellation - Radio sig-

turb the signal causing static or flut-

tering noises to occur. Reducing the

treble level may lessen this effect

until the disturbance clears.

nals being received from several

directions can cause distortion or

fluttering. This can be caused by a

direct and reflected signal from the

same station, or by signals from two

stations with close frequencies. If

this occurs, select another station

until the condition has passed.

4-7

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 8

Multimedia System

NOTE:

Order of playing files (folders) :

Using a cellular phone or a two-

way radio

When a cellular phone is used inside

the vehicle, noise may be produced

from the audio system. This does not

mean that something is wrong with

the audio equipment. In such a case,

try to operate mobile devices as far

from the audio equipment as possible.

1. Song playing order :

sequentially.

to

2. Folder playing order :

❋ If no song file is contained in the

folder, that folder is not displayed.

CAUTION

When using a communication

system such as a cellular phone

or a radio set inside the vehicle, a

separate external antenna must

be fitted. When a cellular phone

or a radio set is used with an

internal antenna alone, it may

interfere with the vehicle's electri-

cal system and adversely affect

safe operation of the vehicle.

WARNING

Do not use a cellular phone

while driving. Stop at a safe

location to use a cellular phone.

4-8

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 9

NOTICE

WARNING

CAUTION

• Do not place beverages close to

the audio system. Spilling bever-

ages may lead to system mal-

function.

• Do not stare at the screen

while driving. Staring at the

screen for prolonged periods

of time could lead to traffic

accidents.

• Operating the device while

driving could lead to accidents

due to a lack of attention to

external surroundings. First

park the vehicle before operat-

ing the device.

• In case of product malfunction,

please contact your place of pur-

chase or After Service center.

• Do not disassemble, assem-

ble, or modify the audio sys-

tem. Such acts could result in

accidents, fire, or electric

shock.

• Adjust the volume to levels that

allow the driver to hear sounds

from outside of the vehicle.

Driving in a state where exter-

nal sounds cannot be heard

may lead to accidents.

• Placing the audio system within

an electromagnetic environment

may result in noise interference.

4

• Prevent caustic solutions such

as perfume and cosmetic oil

from contacting the dashboard

because they may cause dam-

age or discoloration.

• Using the phone while driving

may lead to a lack of attention of

traffic conditions and increase

the likelihood of accidents.

Use the phone feature after

parking the vehicle.

• Pay attention to the volume

setting when turning the

device on. A sudden output of

extreme volume upon turning

the device on could lead to

hearing impairment. (Adjust

the volume to a suitable level

before turning off the device.)

• Heed caution not to spill water

or introduce foreign objects

into the device. Such acts

could lead to smoke, fire, or

product malfunction.

4-9

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 10

Multimedia System

(Continued)

i

Information -

Using the USB

device

• Avoid contact between the USB con- • The device may not recognize the

nector with bodily parts or foreign

objects.

USB device if separately purchased

USB hubs and extension cables are

being used. Connect the USB direct-

ly with the multimedia terminal of

the vehicle.

• Connect the USB device after turning

on the engine. The USB device may

become damaged if it is already con-

nected when the ignition is turned

on.The USB device may not operate

properly if the car ignition is turned

• Repeated connecting/disconnecting

of USB devices within short periods

of time may result in product mal-

function.

• When using mass storage USB

devices with separate logical drives,

only files saved to the root drive can

be played.

on or off with the USB device con- • A strange noise may occur when dis-

nected.

connecting the USB.

• Heed caution to static electricity • Make sure to connect/disconnect

• Files may not properly operate if

application programs are installed

to the USBs.

when connecting/disconnecting USB

devices.

external USB devices with the audio

power turned off.

• Encoded MP3 Players will not be rec- • The amount of time required to rec-

• The device may not operate normal-

ly if MP3 Players, cellular phones,

digital cameras, or other electronic

devices (USB devices not recognized

as portable disk drives) are connect-

ed with the device.

ognized when connected as an exter-

nal device.

ognize the USB device may differ

depending on the type, size or file for-

mats stored in the USB. Such differ-

ences in time are not indications of

malfunctions.

• When connecting an external USB

device, the device may not properly

recognize the USB is in some states.

• The device only supports USB

devices used to play music files.

• Only products formatted with

byte/sectors under 64Kbyte will be

recognized.

• Charging through the USB may not

work for some mobile devices.

• USB images and videos are not sup-

ported.

• The device may not support normal

operation when using a USB memo-

ry type besides (Metal Cover Type)

USB Memory.

• This device recognizes USB devices

formatted in FAT 12/16/32 file for- • Do not use the USB I/F to charge

mats. This device does not recognize

files in NTFS file format.

batteries or USB accessories that

generate heat. Such acts may lead to

worsened performance or damage

to the device.

(Continued)

• Some USB devices may not be sup-

ported due to compatibility issues.

(Continued)

4-10

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 11

(Continued)

i

Information

- Using the

iPod^®device

• When the EQ features of an exter-

nal device, such as the iPod^®, and

the audio system are both active, EQ

effects could overlap and cause

sound deterioration and distortion.

• The device may not support normal

operation when using formats such

as HDD Type, CF, or SD Memory.

• iPod^®is a registered trademark of

Apple Inc.

• In order to use the iPod^®while oper-

ating the keys, you must use a dedi-

cated iPod^®cable. (the cable that is

supplied when purchasing iPod^®

/iPhone^®products)

• If the iPod^®is connected to the vehi-

cle while it is playing, a high pitch

sound could occur for approximate-

ly 1-2 seconds immediately after

connecting. If possible, connect the

iPod to the vehicle with the iPod^®

stopped/ paused.

• The device will not support files

locked by DRM (Digital Rights

Management.)

Whenever possible, turn off the EQ

feature within the external device

upon use by connecting with the

audio system.

• Noise may occur when an iPod^®or

AUX device is connected. When

such devices are not being used, dis-

connect the device for storage.

• When the iPod^®or AUX device

power is connected to the power

jack, playing the external device

may result in noise. In such cases,

disconnect the power connection

before use.

• USB memory sticks used by con-

necting an Adaptor (SD Type or CF

Type) may not be properly recog-

nized.

4

• The device may not operate proper-

ly when using USB HDDs or USBs

subject to connection failures

caused by vehicle vibrations. (e.g. i-

stick type)

• Avoid use of USB mem-

ory products that can

also be used as key

chains or mobile phone

accessories. Use of such

products may cause damage to the

USB jack.

• During ACC ON state, connecting

the iPod^®through the iPod^®cable

will charge the iPod^®through the

car audio system.

• When connecting with the iPod^®

cable, make sure to fully insert the

jack to prevent communication

interference.

• Skipping or improper operation

may occur depending on the charac-

teristics of your iPod^®/Phone^®

device.

• Connecting an MP3 device or phone

through various channels, such as

AUX/BT or Audio/ USB mode may

result in pop noises or abnormal

operation.

(Continued)

4-11

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 12

Multimedia System

(Continued)

i

Information

- Using the AUX

device

• If your iPhone^®is connected to both • Some iPod^®s may not sync with the

the Bluetooth^®Wireless Technology

and USB, the sound may not be

properly played. In your iPhone^®,

select the Dock connector or

Bluetooth^®Wireless Technology to

change the sound output (source).

System depending on its version. If

the Media is removed before the

Media is recognized, then the sys-

tem may not properly restore the

previously operated mode. (iPod^®

charging is not supported.)

• If an external device connector is

connected with the AUX terminal,

then AUX mode will automatically

operate. Once the connector is dis-

connected, the previous mode will

be restored.

• iPod mode cannot be operated when

the iPod^®cannot be recognized due

to versions that do not support com-

munication protocols.

• For fifth generation iPod^®Nano

devices, the iPod^®may not be recog-

nized when the battery level is low.

Please charge the iPod^®for use.

• AUX mode can be used only when

an external audio player (cam-

corder, car VCR, etc.) has been con-

nected.

• The AUX volume can be controlled

separately from other audio modes.

• Connecting a connector jack to the

AUX terminal without an external

device will convert the system to

AUX mode, but only output noise.

When an external device is not

being used, also remove the connec-

tor jack.

• Search/play orders shown within

the iPod^®device may differ with the

orders shown within the audio sys-

tem.

• If the iPod^®malfunctions due to an

iPod^®device defect, reset the iPod^®

and try again. (To learn more, refer to

your iPod^®manual)

• When the external device power is

connected to the power jack, play-

ing the external device may output

noise. In such cases, disconnect the

power connection before use.

(Continued)

• Fully insert the AUX cable to the

AUX jack upon use.

4-12

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 13

i

Information

- Before using

the Bluetooth^®handsfree

Information

safe driving

Information

- When connect-

®

ing a Bluetooth phone

- Precautions for

• Bluetooth^®Handsfree is a feature • Before connecting the head unit

What is Bluetooth^®?

that enables drivers to practice safe

driving. Connecting the head unit

with a Bluetooth^®phone allows the

user to conveniently make and

receive calls and use contacts.

Before using Bluetooth^®, carefully

read the contents of this user’s man-

ual.

with the mobile phone, check to see

that the mobile phone supports

Bluetooth^®features.

• Bluetooth^®refers to a short-dis-

tance wireless networking technolo-

gy which uses a 2.4GHz ~ 2.48GHz

frequency to connect various

devices within a certain distance.

• Even if the phone supports

Bluetooth^®, the phone will not be

found during device searches if the

phone has been set to hidden state

or the Bluetooth^®power is turned

off. Disable the hidden state or turn

on the Bluetooth^®power prior to

searching/connecting with the Head

unit.

• Supported within PCs, external

devices, Bluetooth^®phones, PDAs,

various electronic devices, and auto-

motive environments, Bluetooth^®

allows data to be transmitted at high

speeds without having to use a con-

nector cable.

• Bluetooth^®Handsfree refers to a

device which allows the user to con-

veniently make phone calls with

Bluetooth^®mobile phones through

the audio system.

4

• Excessive use or operations while

driving may lead to negligent driv-

ing practices and result in accidents.

Refrain from excessive operations

while driving.

• Bluetooth phone is automatically

connected when the ignition on.

• Viewing the screen for prolonged

periods of time is dangerous and

may lead to accidents. When driv-

ing, view the screen only for short

periods of time.

• If you do not want automatic con-

nection with your Bluetooth^®

device, turn off the Bluetooth^®fea-

ture within your mobile phone.

• Bluetooth^®Handsfree may not be sup-

ported in some mobile phones. To learn

more about mobile device compatibility,

visit www. hyundaiusa.com.

• The Handsfree call volume and

quality may differ depending on the

mobile phone.

(Continued)

4-13

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 14

Multimedia System

(Continued)

i

Information

- Using the voice

recognition

• Park the vehicle when connecting

the head unit with the mobile phone.

• Bluetooth^®connection may become

intermittently disconnected in some

mobile phones. Follow these steps to

try again.

- When driving on rugged and

uneven roads

• When using the voice recognition

feature, only commands listed with-

in the user's manual are supported.

- During severe rain (heavy rains,

windstorms)

• Phone related voice commands can

®

• Be aware that during the operation

of the voice recognition system,

pressing any key other than the

key terminate voice recognition

mode.

be used only when a Bluetooth

Wireless Technology device is con-

nected.

1.Within the mobile phone, turn the

Bluetooth^®function off/on and try

again.

• When making calls by stating a

name, the corresponding contact

must be downloaded and stored

within the audio system.

2.Turn the mobile phone power

Off/On and try again.

• For superior voice recognition per-

formance, position the microphone

used for voice recognition above the

head of the driver’s seat and main-

tain a proper position when saying

commands.

3.Completely remove the mobile

phone battery, reboot, and then

again.

®

• After downloading the Bluetooth

Wireless Technology phone book, it

takes some times to convert the

phone book data into voice informa-

tion. During this time, voice recogni-

tion may not properly operate.

4.Reboot the Audio System and try

again.

• Within the following situations,

voice recognition may not function

properly due to external sound.

5.Delete all paired devices, pair and

try again.

• Pronounce the voice commands nat-

urally and clearly as if in a normal

conversation.

- When the windows and sunroof

are open

• Handsfree call quality and volume

may differ depending on the model

of your mobile phone.

- When the wind of the cooling /

heating device is strong

- When entering and passing through

tunnels

(Continued)

4-14

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 15

Name

Description

System CControllers and Functions

Each time the key is pressed, the mode is

changed in order of USB, iPod, AUX, My Music,

BT Audio modes.

MEDIA

Audio Head Unit

-RDS, Bluetooth equipped model

❈ In Setup>Display, the media pop up screen will

be displayed when [Mode Pop up] is turned

On

.

❈ When the pop up screen is displayed, use the

TUNE knob or keys

select the desired mode.

to

1

4

~

Operates Phone Screen.

4

• Shortly press the key : Moves to the Display,

Sound, Clock, Phone, System setting modes

• Press and hold the key : Moves to clock settings

• Radio mode : Automatically searches for broad-

cast frequencies.

SEEK

TRACK

• USB, iPod, My Music modes :

- Shortly press the key : Moves to next or previous

song(file).

- Press and hold the key : Rewinds or fast for-

wards the current song(file).

Name

Description

POWER/

VOL knob

•

Power Knob : Turns power On/Off by press-

ing the knob.

Volume Knob : Sets volume by turning the

knob left/right.

Each time the key is pressed, the mode is

changed in order of FM1 ➟ FM2 ➟ FMA ➟ AM ➟

AMA.

RADIO

(for DAB model)

FM1 ➟ FM2 ➟ FMA ➟ DAB1 ➟ DAB2 ➟ AM.

❈ In Setup>Display, the radio pop up screen will

be displayed when [Mode Pop up] is turned

• Radio mode : Saves frequencies (channels) or

receives saved frequencies (channels).

1

6

~

(Preset)

• USB, iPod, My Music modes

On

.

❈ When the pop up screen is displayed, use the

RPT

1

2

-

: Repeat

RDM

: Random

1

6

TUNE knob or keys

select the desired mode.

~

to

4-15

TLe Eng 4 .qxp 2015-05-26 ¿

11:48 Page 16

Multimedia System

Name

Description

TA

SCAN

• Radio mode

- Shortly press the key : Previews each broad-

cast for 5 seconds each.

- Press and hold the key : Previews the broad-

1

6

casts saved in Preset

seconds each.

~

for 5

TA

SCAN

❈ Press the

key again to continue lis-

tening to the current frequency.

• USB, iPod modes

- Shortly press the key : Previews each song

(file) for 10 seconds each.

TA

SCAN

❈ Press the

key again to continue lis-

tening to the current song (file).

Displays menus for the current mode.

Moves to previous screen.

MENU

Name

Description

USB mode : Folder Search

FOLDER

Each time the button is shortly pressed, it sets

the screen Off ➟ Screen On ➟ Screen Off.

❈ Audio operation is maintained and only the

screen will be turned Off. In the screen Off

state, press any key to turn the screen On

again.

❈ May differ depending on the selected audio.

• Radio mode : Changes frequency by turning

the knob left/right.

TUNE knob

• USB, iPod modes : Searches songs (files) by

turning the knob left/right.

❈ When the desired song is displayed, press

the knob to play the song.

4-16

TLe Eng 4 .qxp 2015-05-26 ¿

11:48 Page 17

-RDS, No Bluetooth equipped model

Name

MEDIA

Description

Each time the key is pressed, the mode is

changed in order of USB, iPod, AUX modes.

❈ In Setup>Display, the media pop up screen

will be displayed when [Mode Pop up] is

turned On

.

❈ When the pop up screen is displayed, use

1

4

the TUNE knob or keys

to select the desired mode.

~

4

• Shortly press the key : Moves to the Display,

Sound, Clock, Phone, System setting modes.

• Press and hold the key : Moves to clock set-

tings.

• Radio mode : Automatically searches for

broadcast frequencies.

SEEK

TRACK

• USB, iPod modes :

Name

Description

• Changes to FM mode.

- Shortly press the key : Moves to next or pre

vious song(file).

FM

• Each time the key is pressed, the mode changed

in order of FM1 ➟ FM2.

- Press and hold the key : Rewinds or fast for-

wards the current song(file).

AM

Changes to AM mode.

POWER/

VOL knob

•

Power Knob : Turns power On/Off by

pressing the knob.

•

Volume Knob : Sets volume by turning the

knob left/right.

• Radio mode : Saves frequencies (channels or

receives saved frequencies (channels).

• USB, iPod^®modes

1

6

~

(Preset)

RPT

1

2

-

: Repeat

RDM

: Random

4-17

TLe Eng 4 .qxp 2015-05-26 ¿

11:48 Page 18

Multimedia System

Name

Description

TA

SCAN

• Radio mode

- Shortly press the key : Previews each broad-

cast for 5 seconds each.

- Press and hold the key : Previews the broad-

for 5

casts saved in Preset

seconds each.

1

6

~

TA

SCAN

❈ Press the

key again to continue lis-

tening to the current frequency.

• USB, iPod modes

- Shortly press the key : Previews each song

(file) for 10 seconds each.

TA

SCAN

❈ Press the

key again to continue lis-

tening to the current song (file).

Displays menus for the current mode.

Moves to previous screen.

MENU

Name

Description

USB mode : Folder Search.

FOLDER

❈ May differ depending on the selected audio.

Each time the button is shortly pressed, it sets

the screen Off ➟ Screen On ➟ Screen Off.

❈ Audio operation is maintained and only the

screen will be turned Off. In the screen Off

state, press any key to turn the screen On

again.

• Radio mode : Changes frequency by turning

the knob left/right.

TUNE knob

• USB, iPod modes: Searches songs (files) by

turning the knob left/right.

❈ When the desired song is displayed, press

the knob to play the song.

4-18

TLe Eng 4 .qxp 2015-05-26 ¿

11:48 Page 19

Mode Pop up

Song Info

Setup

On

[Mode Pop up] Changes

selection mode

.

When playing an MP3 file, select the

desired display info from ‘Folder/File’

or ‘Album/Artist/Song’.

Display Settings

RADIO

• During On state, press the

MEDIA

or

change pop up screen.

key to display the mode

Press the

[Display] through

key Select

TUNE knob or

key Select menu through

RPT

1

Scroll text

TUNE knob

On

Off

[Scroll text] Set

/

On

•

: Maintains scroll

4

Off

: Scrolls only one (1) time.

4-19

TLe Eng 4 .qxp 2015-05-26 ¿

11:48 Page 20

Multimedia System

Audio Settings

Speed Dependent Volume

Control

Sound Settings

This menu allows you to set the

‘Bass, Middle, Treble’ and the Sound

Fader and Balance.

This feature is used to automatically

control the volume level according to

the speed of the vehicle.

Press the

[Sound] through

key Select

TUNE knob or

key Select menu through

Select [Audio Settings] Select menu

TUNE knob

RDM

2

through

Select [Speed Dependent Vol.] Turn

SDVC On/Off by pressing the

TUNE knob

Turn

TUNE knob left/right to set

• Bass, Middle, Treble : Selects the

sound tone.

• Fader, Balance : Moves the sound

fader and balance.

• Default : Restores default settings.

❈ Return : While adjusting values,

re-pressing the TUNE knob will

restore the parent menu.

Volume Dialogue

Adjusts voice recognition volume.

Select [Volume Dialogue] Set vol-

TUNE knob

ume of

4-20

TLe Eng 4 .qxp 2015-05-26 ¿

11:49 Page 21

Clock Settings

Day Settings

Clock Settings

This menu is used to set the time.

This menu is used to set the

date(DD/MM/YYYY).

Select [Clock Settings] Set through

TUNE knob Press TUNE knob Select [Day Settings] Set through

TUNE knob Press TUNE knob

Press the

key Select

TUNE knob or

key Select menu through

TUNE knob

[Clock] through

3

4

❈ Adjust the number currently in

focus to set the [hour] and press ❈ Adjust the number currently in

the tune knob to set the [minute].

focus to make the settings and

press the tune knob to move to the

next setting. (Set in order of Day/

Month/Year)

4-21

TLe Eng 4 .qxp 2015-05-26 ¿

11:49 Page 22

Multimedia System

Time Format

Automatic RDS Time

NOTICE

This function is used to set the 12/24 This option is used to automatically

hour time format of the audio system. set the time by synchronizing with

Select [Time Format] Set 12Hr / 24Hr RDS.

Because some local radio stations

do not support an automatic RDS

time

function,

some

RDS

through TUNE knob

Select [Automatic RDS Time] Set

On

Transmitters may not provide cor-

rect time. If incorrect time is dis-

played, set it manually following

the Step "Clock Setting" in previ-

ous page.

Off

through TUNE knob

/

On

Off

•

: Turn on Automatic Time

: Turn off.

Clock Display when Power is OFF

Select [Clock Disp.(Pwr Off)] Set

On

Off through TUNE knob

: Displays time/date on screen

: Turn off.

/

On

Off

•

4-22

TLe Eng 4 .qxp 2015-05-26 ¿

11:49 Page 23

➂ Pairing completion is displayed.

Pair Phone

Phone Settings

(For Bluetooth^®Wireless

Technology equipped model)

❈ In some mobile phones, pairing

will automatically be followed by

connection.

NOTICE

To pair a Bluetooth^®Wireless

Technology

❈ It is possible to pair up to five

Bluetooth^®Wireless Technology

enabled mobile phones.

enabled

mobile

Press the

key Select [Phone]

phone, authentication and con-

nection processes are first

required. As a result, you cannot

pair your mobile phone while driv-

ing the vehicle. First park your

vehicle before use.

4

through

TUNE knob or

key

Select menu through

TUNE knob

4

Select [Pair Phone] Set through

TUNE knob

➀ Search for device names as dis-

played on your mobile phone and

connect.

➁ Input the passkey displayed on the

screen. (Passkey : 0000)

❈ The device name and passkey will

be displayed on the screen for up

to 3 minutes. If pairing is not com-

pleted within the 3 minutes, the

mobile phone pairing process will

automatically be canceled.

4-23

TLe Eng 4 .qxp 2015-05-26 ¿

11:49 Page 24

Multimedia System

➁ Connect the selected mobile • Changing connection sequence

phone. (Priority)

➂ Connection completion is dis- This is used to change the order (pri-

Phone List

The names of up to 5 paired phones

will be displayed.

played.

ority) of automatic connection for the

paired mobile phones.

A [ ] is displayed in front of the cur-

rently connected phone.

❈ If a phone is already connected,

disconnect the currently connect-

ed phone and select a new phone

to connect.

Select [Phone List] Select [Priority]

through TUNE knob Select No. 1

Priority mobile phone

➀ Select [Priority].

• Disconnecting a connected phone

Select [Phone List] Select mobile

➁ From the paired phones, select

the phone desired for No.1 priority.

phone through

Select [Disconnect Phone]

TUNE knob

➂ The changed priority sequence is

displayed.

Select the desired name to setup the

selected phone.

❈ Once the connection sequence

(priority) is changed, the new no. 1

priority mobile phone will be con-

nected.

• Connecting a phone

Select [Phone List] Select mobile

TUNE knob

- When the no. 1 priority cannot be

connected : Automatically attempts

to connect the most recently con-

nected phone.

phone through

Select [Connect Phone]

➀ Select the currently connected

mobile phone.

- Cases when the most recently

connected phone cannot be con-

nected : Attempts to connect in

the order in which paired phones

are listed.

➁ Disconnect the selected mobile

phone.

➂ Disconnection completion is dis-

played.

➀ Select a mobile phone that is not

currently connected.

- The connected phone will automat-

ically be changed to No. 1 priority.

4-24

TLe Eng 4 .qxp 2015-05-26 ¿

11:49 Page 25

• Delete

Phone book Download

Auto Download

Select [Phone List] Select mobile

TUNE knob

This feature is used to download When connecting a mobile phone, it

phone book and call histories into is possible to automatically download

phone through

Select [Delete]

the audio system.

new phone book and Call Histories.

On

Select [Phone book Download]

Select through

Select [Auto Download] Set

Off

/

TUNE knob

through

TUNE knob

➀ Select the desired mobile phone.

➁ Delete the selected mobile phone.

➂ Deletion completion is displayed.

NOTICE

• The download feature may not

be supported in some mobile

phones.

❈ When attempting to delete a cur-

rently connected phone, the

phone is first disconnected.

4

• If a different operation is per-

formed while phone book is

being downloaded, downloading

will be discontinued. Phone

book already downloaded will

be saved.

NOTICE

• When you delete

phone, the mobile phone phone

book will also be erased.

• For stable Bluetooth^®Wireless

Technology

delete the mobile phone from

the audio and also delete the

audio from your mobile phone.

a

mobile

• When downloading new phone

book, delete all previously saved

phone book before starting

download.

communication,

4-25

TLe Eng 4 .qxp 2015-05-26 ¿

11:49 Page 26

Multimedia System

❈ If the Bluetooth^®Wireless

Technology system is turned on,

the system will automatically try to

connect the most recently connect-

ed Bluetooth^®Wireless Technology

mobile phone.

Outgoing Volume

Using the Bluetooth^®Wireless

Technology System

To use Bluetooth^®Wireless Technology

when the system is currently off, fol-

low these next steps.

This is used to set the volume of your

voice as heard by the other party

while on a Bluetooth^®Wireless

Technology enabled handsfree call.

• Turning On Bluetooth^®Wireless

Select [Outgoing Volume] Set vol-

ume through

TUNE knob

Technology through the

Key

NOTICE

Press the

Guidance

key Screen

❈ Even while on a call, the volume

can be changed by using the

• Bluetooth^®Wireless Technology

connection may become inter-

mittently disconnected in some

mobile phones. Follow these

next steps to try again.

1) Turn the Bluetooth^®Wireless

Technology function within the

mobile phone ON/OFF and try

to connect again.

TRACK

key.

SEEK

,

❈ Moves to the screen where

Bluetooth^®Wireless Technology

functions can be used and dis-

plays guidance.

Bluetooth^®Wireless Technology

System Off

• Turning On Bluetooth^®Wireless

Technology through the

Key

This feature is used when you do not

wish to use the Bluetooth^®Wireless

Technology system.

2) Turn the mobile phone power

ON/OFF and try to connect

again.

Press the

through

key Select [Phone]

Select [Bluetooth System Off] Set

3

TUNE knob or

key

through

TUNE knob

➀ A screen asking whether to turn

on Bluetooth^®Wireless Technology

will be displayed.

❈ If a phone is already connected,

disconnect the currently connect-

ed phone and turn the Bluetooth^®

Wireless Technology system off.

3) Completely remove the mobile

phone battery, reboot, and then

try to connect again.

YES

➁ On the screen, select

to turn

on Bluetooth^®Wireless Technology

and display guidance.

4) Reboot the audio system and

try to connect again

5) Delete all paired devices in your

mobile phone and the audio

system and pair again for use.

4-26

TLe Eng 4 .qxp 2015-05-26 ¿

11:49 Page 27

• Expert : This mode is for expert

users and omits some information

during voice command operation.

(When using Expert mode, guid-

ance instructions can be heard

through the [Help] or [Menu] com-

mands.)

Memory Information

(If equipped)

System Settings

Displays currently used memory and

total system memory.

Press the

[System]

key Select

Select [Memory Information] OK

The currently used memory is dis-

played on the left side while the total

system memory is displayed on the

right side.

❈ May differ depending on the

selected audio.

4

Language

This menu is used to set the display

and voice recognition language.

Select [Language] Set through

TUNE knob

VRS Mode

This feature is used to change voice

command feedback between Normal

and Expert modes.

Select [VRS Mode] Set through

TUNE knob

❈ The system will reboot after the

language is changed.

• Normal : This mode is for beginner

users and provides detailed instruc-

tions during voice command opera-

tion.

❈ Language support by region

-

4-27

TLe Eng 4 .qxp 2015-05-26 ¿

11:49 Page 28

Multimedia System

Preset SEEK

Traffic Announcement (TA)

TA

Radio : FFM, AM

1

6

Press the

~

key

Shortly pressing the

(under 0.8 seconds) : Set

key

Off

SCAN

On

/

TA Traffic Announcement) mode.

• Shortly pressing the key : Plays the

frequency saved in the correspon-

ding key.

MENU

• Pressing and holding the key :

Pressing and holding the desired

MENU

Within

(Auto Store) and Info functions.

key are the A.Store

1

6

key from

currently playing broadcast to the

~

will save the

selected key and sound a BEEP.

TA

SEEK

Press the

key

SCAN

TRACK

Press the

key

SEEK

,

• Pressing and holding the key : The

broadcast frequency increases and

previews each broadcast for 5 sec-

onds each. After scanning all fre-

quencies, returns and plays the cur-

rent broadcast frequency.

• Shortly pressing the key : Changes

the frequency.

• Pressing and holding the key :

Automatically searches for the next

frequency.

Selecting through manual

search

Turn the TUNE knob left/right to

adjust the frequency.

4-28

TLe Eng 4 .qxp 2015-05-26 ¿

11:49 Page 29

AF (Alternative Frequency)

Info Volume

AST (Auto Store)

Info Volume refers to the sound vol-

ume upon receiving News or Traffic

information.

MENU

Press the

through

key Set [ AF]

RDM

2

TUNE knob or

key.

MENU

Press the

through

key Set [ AST]

RPT

The Alternative Frequency option

can be turned On/Off.

1

TUNE knob or

key.

The info volume can be controlled by

turning the

VOL knob left/right

while a news or traffic broadcast is

playing.

Region

MENU

❈ AF, Region, and News are RDS

Radio menus.

Press the

through

key Set [ Region]

3

TUNE knob or

key.

4

The Region option can be turned

On/Off.

Select AST (Auto Store) to save fre-

quencies with superior reception to

1

6

presets

~

. If no frequen-

News

cies are received, then the most

recently received frequency will be

broadcast.

MENU

Press the

through

key Set [ News]

4

TUNE knob or

key.

The News option can be turned

On/Off.

❈ Saves only to the Preset memory

1

6

~

of FMA or AMA mode.

4-29

TLe Eng 4 .qxp 2015-05-26 ¿

11:49 Page 30

Multimedia System

Ensemble

Preset SEEK

DAB Raddio (FFoor DAB Model)

❈ RADIO may differ depending on

the selected audio.

FOLDER

1

6

Press the

key

Press the

~

key

FOLDER

,

Changing RADIO mode

• Search the Ensemble. Use the Tune • Shortly pressing the key (under 0.8

knob to select the desired

Ensemble and select stations with-

in the Ensemble.

seconds): Plays the station saved in

the corresponding key.

• Pressing and holding the key (over

0.8 seconds): Pressing and holding

RADIO

Press the

Key to change the

mode in order of FM1 ➟ FM2 ➟ FMA

➟ DAB1 ➟ DAB2 ➟ AM.

1

6

the desired key from

~

will save the currently playing station

to the selected key and sound a

BEEP.

SEEK

TRACK

Press the

key

SEEK

,

• Shortly pressing the key (under 0.8

seconds): Changes the station.

• Press and hold the key (over 0.8

seconds): Change the Ensemble.

4-30

TLe Eng 4 .qxp 2015-05-26 ¿

11:49 Page 31

L-Band

SCAN

MENU

TA

SCAN

MENU

Press the

Band] through

key Set [

TUNE knob or

L-

Press the

key

MENU

• Shortly pressing the key (under 0.8

seconds): TA On/Off

Within

key are the Service.F

RDM

key.

2

(Service Following) And L-Band

functions.

DAB Broadcasts include BAND III

and L-BAND according to the

Range. BAND III is always set as the

default while the L-BAND feature can

be turned on to search for L-BAND

broadcasts when in regions where L-

BAND broadcasts are available.

• Pressing and holding the key(over

0.8 seconds):The broadcast station

increases and previews each

broadcasts for 5 seconds each.

After scanning all stations, returns

and plays the current broadcast

station.

4

Selecting through manual

search

Service Following

MENU

Press the

Service.F] through

RPT

key Set [

TUNE knob or

key.

1

When the DAB signal is weak, the

Service Following feature will auto-

matically convert to the identical FM

broadcast when such a broadcast is

available.

Turn the TUNE knob left/right to

select the station.

4-31

TLe Eng 4 .qxp 2015-05-26 ¿

11:50 Page 32

Multimedia System

Basic Methhod of Use : USB / iPood^®/ My Music

- RDS, Bluetooth equipped model

Name

Repeat

Description

RPT

1

While song (file) is playing

key

USB, iPod^®, My Music mode :

• Repeats the current song

USB mode :

• Repeats songs within the current folder.

(Pressing the key twice).

RPT

1

❈ Press the

key again to turn off repeat.

Random

RDM

2

While song (file) is playing

iPod^®, My Music mode :

• Plays all songs randomly

USB mode :

key

• Folder Random : Plays all files within the cur-

rent folder in random order.

- RDS, No Bluetooth equipped model

• All Random : Plays all files in random

order(Pressing the key twice).

RDM

2

❈ Press the

key again to turn off repeat.

Changing

Song/File

TRACK

While song (file) is playing

key

SEEK

,

• Shortly pressing the key : plays the current

song from the beginning / plays the next song.

• Pressing and holding the key : Rewinds the

song / fast forwards the song.

TRACK

❈ If the

key is pressed again within 1

second, the previous song is played.

4-32

TLe Eng 4 .qxp 2015-05-26 ¿

11:50 Page 33

- RDS, Bluetooth equipped model

Name

Scan

Description

TA

SCAN

While song (file) is playing key

Scans all songs for 10 seconds starting from

the next song.

TA

SCAN

❈ Press the

key again to turn off.

❈ The SCAN function is not supported in iPod^®

mode.

Folder

FOLDER

While file is playing

key

FOLDER

,

• Searches the previous / next folder

Search :

USB Mode

4

❈ If a folder is selected by pressing the

TUNE

knob, the first file within the selected folder will

be played.

- RDS, No Bluetooth equipped model

4-33

TLe Eng 4 .qxp 2015-05-26 ¿

11:50 Page 34

Multimedia System

Folder Repeat

Copy (if equipped)

MENU : USB

Set [ F.RPT] through the

3

TUNE Set [ Copy] through the

6

TUNE

MENU

knob or

within the current folder.

key to repeat songs knob or

key.

In USB mode, press

key.

❈ This is used to copy the current

song into My Music. You can play

the copied Music in My Music

mode.

❈ Press F.RPT again to turn off.

All Random

❈ If another key is pressed while

copying is in progress, a pop up

asking you whether to cancel

copying is displayed.

Set [ A.RDM] through the

4

TUNE

key to randomly play all

knob or

songs within the USB.

❈ Press A.RDM again to turn off.

❈ If another media is connected or

inserted (USB, iPod^®, AUX) while

copying is in progress, copying is

canceled.

Repeat

Set [ RPT] through the

RPT

TUNE

key to repeat the cur-

Information

1

knob or

rent song.

Set [ Info] through the

5

TUNE

key to display informa-

❈ Music will not be played while

copying is in progress.

knob or

tion of the current song.

❈ Press RPT again to turn off.

MENU

❈ Press the

info display.

key to turn off

Folder Random

Set [ F.RDM] through the

RDM

TUNE

key to randomly play

2

knob or

songs within the current folder.

❈ Press F.RDM again to turn off.

4-34

TLe Eng 4 .qxp 2015-05-26 ¿

11:50 Page 35

MENU : iPod^®

Information

Set [ Info] through the

MENU : My Music Mode

(If equipped)

TUNE

3

knob or

key.

MENU

In iPod mode, press

key.

Displays information of the current

song.

MENU

In My Music mode, press

key.

MENU

❈ Press the

info display.

key to turn off

Search

Set [ Search] through the

4

TUNE

4

Repeat

knob or

key.

Displays iPod^®category list.

❈ Searching iPod^®category is

Set [ RPT] through the

RPT

TUNE

key to repeat the cur-

Repeat

1

knob or

rent song.

Set [ RPT] through the

TUNE knob

MENU

key pressed, move to par-

RPT

1

or

key.

❈ Press RPT again to turn repeat

off.

ent category.

Repeats the currently playing song.

❈ Press RPT again to turn repeat

off.

Random

Set [ RDM] through the

TUNE

RDM

2

knob or

key.

Random

Plays all songs within the currently

playing category in random order.

Set [ RDM] through the TUNE knob

RDM

2

or

key.

❈ Press RDM again to turn off.

Plays all songs within the currently

playing folder in random order.

❈ Press RDM again to turn random

off.

4-35

TLe Eng 4 .qxp 2015-05-26 ¿

11:50 Page 36

Multimedia System

Information

Delete All

AUX

Set [ Info] through the

3

TUNE knob Set [ Del.All] through the

TUNE

5

or

key.

knob or

key.

AUX is used to play external MEDIA

currently connected with the AUX

terminal.

Displays information of the current Deletes all songs of My Music.

song.

MENU

AUX mode will automatically start

when an external device is connect-

ed to the AUX terminal.

❈ Press the

info display.

key to turn off

Delete Selection

MENU

Press the

key Set [ Del.Sel]

6

through the TUNE knob or

key.

If an external device is connected,

MEDIA

Delete

Songs within My Music are selected

and deleted.

you can also press the

change to AUX mode.

key to

Set [ Delete] through the

TUNE

4

knob or

key.

• Deletes currently playing file

In the play screen, pressing delete

will delete the currently playing song.

• Deletes file from list

➀ Select the file you wish to delete

by using the

TUNE knob.

➀Select the songs you wish to

delete from the list.

❈ AUX mode cannot be started

unless there is an external device

connected to the AUX terminal.

MENU

➁ Press the

key and select

the delete menu to delete the

selected file.

MENU

➁After selecting, press the

key and select the delete menu.

4-36

TLe Eng 4 .qxp 2015-05-26 ¿

11:50 Page 37

• Bluetooth^®Wireless Technology

audio can be used only when the

[Audio Streaming] of Phone is

Using the Bluetooth^®Wireless

Technology audio features

Bluetoothh^®Wireless

Technoology Auddiio (If equipped)

• Play / Stop

turned

.

On

Press the TUNE knob to play and

pause the current song.

What is Bluetooth^®Wireless

Technology?

❈ Setting

Bluetooth^®Wireless

Technology Audio Streaming :

Press the key Select

[Phone] through the tune knob or

Bluetooth^®Wireless Technology

allows devices to be connected in a

short distance, including hands-free

devices, stereo headsets, wireless

remote controllers, etc. For more

information, visit the Bluetooth^®

Wireless Technology website at

www.Bluetooth.com

3

key Select [Audio Streaming]

TUNE knob Set

through the

On

Off

/

4

Starting Bluetooth^®Wireless

Technology Audio

❈ The play / pause functions may

not be supported in some mobile

phones.

MEDIA

• Press the

key to change the

Before using Bluetooth^®Wireless

Technology audio features

mode in order of USB ➟ AUX ➟ My

Music ➟ BT Audio.

• Bluetooth^®Wireless Technology • If BT Audio is selected, Bluetooth^®

audio may not be supported

depending on the compatibility of

your Bluetooth^®Wireless Technology

mobile phone.

Wireless Technology audio will start

playing.

❈ Audio may not automatically start

playing in some mobile phones.

• In order to use Bluetooth^®Wireless

Technology audio, you must first pair

and connect the Bluetooth^®

Wireless Technology mobile phone.

4-37

TLe Eng 4 .qxp 2015-05-26 ¿

11:50 Page 38

Multimedia System

Making a call using the Steering wheel remote

controller

Name

Description

• Each time this key is pressed, the mode is

changed in order of FM1 ➟ FM2 ➟ FMA ➟

AM ➟ AMA ➟ USB(iPod) ➟ AUX

(for DAB model)

FM1 ➟ FM2 ➟ FMA ➟ DAB1 ➟ DAB2 ➟ AM

➟ USB(iPod) ➟ AUX

• If the media is not connected or a disc is not

inserted, corresponding modes will be dis-

abled.

+

-

Raises or lowers speaker volume.

Mutes audio volume.

key

❈ The actual feature in the vehicle may differ from the

illustration.

4-38

TLe Eng 4 .qxp 2015-05-26 ¿

11:51 Page 39

Making a call using the Steering wheel remote

controller (For Bluetooth equipped Model)

Name

Description

Mutes the microphone during a call.

• Each time this key is pressed, the mode is

changed in order of FM1 ➟ FM2 ➟ FMA ➟

AM ➟ AMA ➟ USB(iPod) ➟ AUX ➟ My

Music ➟ BT Audio

(for DAB model)

FM1 ➟ FM2 ➟ FMA ➟ DAB1 ➟ DAB2 ➟ AM

➟ USB(iPod) ➟ AUX ➟ My Music ➟ BT Audio

• If the media is not connected or a disc is not

inserted, corresponding modes will be dis-

abled.

4

+

-

Raises or lowers speaker volume.

Places and transfers calls.

key

• Check call history and making call

➀ Shortly press (under 0.8 seconds) the

key on the steering remote controller.

➁ The call history list will be displayed on the

screen.

➂ Press the

key again to connect a call

❈ The actual feature in the vehicle may differ from the

illustration.

to the selected number.

• Redialing the most recently called number

➀ Press and hold (over 0.8 seconds) the

key on the steering remote controller.

➁ The most recently called number is redialed.

Ends calls or cancels functions.

key

4-39

TLe Eng 4 .qxp 2015-05-26 ¿

11:51 Page 40

Multimedia System

Phone Book

Phone Setup

key Set [ P. Press the

TUNE knob or through the

key.

Phone MENU

Press the

Book] through the

key Set [ Setup]

3

TUNE knob or

Press the

three menus (Call History, Phone

Book, Phone Setup).

key to display

RDM

2

key.

The phone book is displayed and The Bluetooth^®Wireless Technology

can be used to select a number and mobile phone setup screen is dis-

make a call.

played. For more information, refer to

❈ If more than one number is saved “Phone Setup”.

to one contact, then a screen

showing the mobile phone num-

ber, Home and office number is

displayed. Select the desired num-

ber to make the call.

Call History

❈ If phone book do not exist, a

screen asking whether to down-

load phone book is displayed.

(The download feature may not be

supported in some mobile phones)

Press the

History] through the

key Set [

TUNE knob

RPT

1

or

key.

The call history is displayed and can

be used to select a number and

make a call.

If call history does not exist, a screen

asking whether to download call his-

tory is displayed. (The download fea-

ture may not be supported in some

mobile phones)

4-40

TLe Eng 4 .qxp 2015-05-26 ¿

11:51 Page 41

Skipping Prompt Messages

Voice Recoggnition

(If equipped)

i

Information

While prompt message is being stat-

key on the

For proper recognition, say the com-

mand after the voice instruction and

beep tone.

ed Shortly press the

steering remote controller

The prompt message is immediately

ended and the beep tone will sound.

After the “beep”, say the voice com-

mand.

Using Voice Recognition

Contact List Best Practices

Starting Voice Recognition

1)Do not store single-name entries

(e.g., “Bob”, “Mom”, “Kim”, etc.).

Instead, always use full names

(including first and last names) for

all contacts (e.g., use “Jacob

Stevenson” instead of “Dad”).

Shortly press the

steering wheel. Say a command.

key on the

Re-starting Voice Recognition

4

While system waits for a command

Shortly press the key on the

steering remote controller

2)Do not use abbreviations (i.e., use

“Lieutenant” instead of “Lt.” or

“Sergeant” instead of “Sgt.”).

The command wait state is immedi-

ately ended and the beep ton will

sound. After the “beep”, say the voice

command.

3)Do not use acronyms (i.e., use

“County Finance Department”

instead of “CFD”).

If prompt feedback is in [ON], then

the system will say “Please say a

command after the beep (BEEP)”

4)Do not use special characters

(e.g., “@”, “hyphen -”, “asterisk *”,

“ampersand &”).

• If prompt feedback is in [OFF]

mode, then the system will only say

“(BEEP)”

5)If a name is not recognized from

the contact list, change it to a

more descriptive name (e.g., use

“Grandpa Joseph” instead of “Pa

Joe”).

• To change Prompt Feedback

[System]

[On]/[Off], go to

[Prompt Feedback]

4-41

TLe Eng 4 .qxp 2015-05-26 ¿

11:51 Page 42

Multimedia System

Voice Recognition and Phone

Contact Tips :

Ending Voice Recognition

The Hyundai Voice Recognition

System may have difficulty under-

standing some accents or uncom-

mon names.

While Voice Recognition is operating

key on the

Press and hold the

steering remote controller

When using Voice Recognition to

place a call, speak in a moderate

tone, with clear pronunciation To

maximize the use of Voice

Recognition, consider these guide-

lines when storing contacts:

i

Information

• While using voice command, press-

ing any steering wheel control or a

different key will end voice com-

mand.

• When the system is waiting for a

voice command, say “cancel” or

“end” to end voice command.

• Do not store single-name entries

(e.g., “Bob”, “Mom”, etc.). Instead,

always use full names (including first

and last names) for these contacts

• When the system is waiting for a

voice command, press and hold the

key on the steering wheel to end

voice command.

• Do not use special characters (e.g.,

'@', '-', '*', '&', etc.)

• Do not use abbreviations (i.e., use

"Lieutenant" instead of "Lt.") or

acronyms (i.e., use "County Finance

Department" instead of "C. F. D."; Be

sure to say the name exactly as it is

entered in the contacts list

4-42

TLe Eng 4 .qxp 2015-05-26 ¿

11:51 Page 43

Illustration on using voice commands

More Help

• Starting voice command.

Here are some examples of mode commands.

You can say a radio type like 'FM', 'AM', or 'Satellite'.

Shortly pressing the

key (under 0.8 seconds) :

You can also say a media source like 'USB', 'My

Music', or 'iPod'.

Please say a command after

the beep or say "help" for more

information.

Beep~

Additionally, there are phone commands like

"Contacts', 'Call History', or 'Dial Number".

More Help

You can find more detailed commands in the user's

manual.

Please say a command after the beep.

More Help

4

Here are some examples of mode commands.

You can say a radio type like 'FM', 'AM', or 'Satellite'.

• End voice command.

Shortly pressing the

You can also say a media source like 'USB', 'My

Music', or 'iPod'.

key (under 0.8 seconds) :

Additionally, there are phone commands like

"Contacts', 'Call History', or 'Dial Number".

Please say a command

after the beep or say "help"

for more information.

You can find more detailed commands in the user's

manual.

Contacts

Please say a command after the beep.

Contacts.

Please say the name of the contact you want

to call.

• Skipping Voice Recognition

Shortly pressing the key (under 0.8 seconds) :

Please say a... while guidance message is being stated

Cancel

Shortly pressing the

key (under 0.8 seconds)

(BEEP)

Beep Beep.. (end beep)

More Help

4-43

TLe Eng 4 .qxp 2015-05-26 ¿

11:51 Page 44

Multimedia System

Voice Command List

• Common Commands : These commands can be used in most operations. (However a few commands may not be

available during certain operations)

Command

More Help

Function

Command

Contacts

Function

Displays the Contacts screen. After saying

this command, say the name of a contact

saved in the Contacts to automatically con-

nect the call.

Provides guidance on commands that can be

used anywhere in the system.

(Call by Name)

Provides guidance on commands that can be

used within the current mode.

Help

Displays the Dial number screen. After saying

this command, you can say the number that

you want to call.

Dial Number

Call<Name>

Calls <Name> saved in Contacts

Ex) Call “John Smith”

Calls <Name> to the number that is saved as

"Mobile" in Contacts

Call<Name>

on Mobile

Connects the most recently called number.

Redial

Provides guidance on how to use voice recog-

nition and Bluetooth^®connections.

Tutorial

Ex) Call "John Smith" on Mobile

Calls <Name> to the number that is saved as

"Office" in Contacts

Call<Name>

in Office

• When listening to the radio, displays the next

radio screen. (FM1 ➟ FM2 ➟ AM ➟ XM1 ➟

XM2 ➟ XM3 ➟ FM1)

Ex) Call "John Smith" in Office

• When listening to a different mode, displays

the most recently played radio screen.

• When currently listening to the FM radio,

maintains the current state.

Calls <Name> to the number that is saved as

"Home" in Contacts

Call<Name>

at Home

Radio

Ex) Call "John Smith" at Home

Calls <Name> to the number that is saved as

"Other" in Contacts

Call<Name>

on Other

• When listening to a different mode, displays

the most recently played FM screen.

Ex) Call "John Smith" on Other

Displays the FM1 screen.

Displays the FM2 screen.

Displays the AM screen.

FM1(FM One)

FM2(FM Two)

AM

Provides guidance on Phone related com-

mands. After saying this command, say

“Favorites”,“Call History”, “Contacts” or ”Dial

Number” execute corresponding functions.

Phone

Displays the Favorite screen.

Favorites

Displays the Call History screen.

Call History

4-44

TLe Eng 4 .qxp 2015-05-26 ¿

11:51 Page 45

Command

Function

Command

Please repeat

Mute

Function

Repeats the most recent comment.

Mutes the sound.

Plays the most recently played broadcast

saved in FM Preset 1~6

FM Preset 1~6

Plays the broadcast saved in AM Preset 1~6

AM Preset 1~6

FM 87.5~107.9

Cancel (Exit)

Ends voice command.

Plays the FM broadcast of the corresponding

frequency.

Plays the AM broadcast of the corresponding

frequency.

AM 530~1701

Media

Moves to the most recently played media

screen.

4

Plays USB music.

USB

Plays iPod music.

iPod

Plays the music saved in the My Music.

Plays the connected external device.

My Music

AUX (Auxiliary)

Bluetooth^®Audio

Plays the music saved in connected

Bluetooth^®device.

Mutes the sound

Mute

4-45

TLe Eng 4 .qxp 2015-05-26 ¿

11:51 Page 46

Multimedia System

• FM/AM radio Commands : Commands available during

FM, AM radio operation

• USB Commands : Commands available during USB

operation

Command

Random

Function

Command

Preset 1~6

Scan

Function

Randomly plays the files within the current

folder.

Plays the broadcast station saved in Preset 1~6.

Scans receivable frequencies from the current

broadcast and plays for 10 seconds each.

Cancels random play to play files in sequen-

tial order.

Random Off

Moves to the next preset from the current

present and plays for 10 seconds each.

Preset Scan

Information

Repeat

Repeats the current file.

Displays the information of the current broad-

cast.(This feature can be used when receiving

RBDS broadcasts.)

Cancels repeat play to play files in sequential

order.

Repeat Off

Information

Displays the information screen of the current

file.

Plays the first file in the next folder.

Next Folder

• Satellite radio Commands : Commands that can be used

while listening to Satellite Radio.

Plays the first file in the previous folder.

Previous Folder

Command

Channel 0~225

Scan

Function

Plays the selected Satellite Radio channel.

Scans receivable channels from the current

broadcast and plays for 10 seconds each.

Preset 1~6

Information

Plays the broadcast saved in Preset 1~6.

Displays the information of the current broad-

cast.

4-46

TLe Eng 4 .qxp 2015-05-26 ¿

11:51 Page 47

• iPod^®Commands : Commands available during iPod^®

operation

• Bluetooth^®Wireless Technology Audio Commands :

Commands available during Bluetooth^®Wireless

Technologyaudio streaming from mobile phone oper-

ation Command Operation

Command

Random

Function

Randomly plays the songs within the current

category.

Command

Play

Pause

Function

Plays the currently paused song.

Pauses the current song.

Cancels random play to play songs in

sequential order.

Random Off

Repeat

Repeats the current song.

Cancels repeat play to play songs in sequen-

tial order.

Repeat Off

4

• My Music Commands : Commands available during

My Music operation

Command

Random

Function

Randomly plays all saved files.

Cancels random play to play files in sequen-

tial order.

Random Off

Repeat

Repeats the current file.

Cancels repeat play to play files in sequential

order.

Repeat Off

Delete

Deletes the current file. You will bypass an

additional confirmation process.

4-47

Multimedia System for Your Hyundai Tucson SUV Third Generation (2016-2019)

Related Topics

Popular Owner Manuals

Latest Owner Manuals