Get Multimedia System -> Multimedia system Guide for Hyundai Tucson SUV Third Generation (2016-2019)

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 2

Multimedia System

MULTIMEDIA SYSTEM

AUX, USB and iPod^®port

i

Information

• If you install an aftermarket HID

headlamp, your vehicle’s audio and

electronic device may malfunction.

When using a portable audio device

connected to the power outlet, noise

may occur during playback. If this

happens, use the power source of the

portable audio device.

• Prevent chemicals such as perfume,

cosmetic oil, sun cream, hand clean-

er, and air freshener from contacting

the interior parts because they may

cause damage or discoloration.

❈ iPod^®is a trademark of Apple Inc.

OTL045239L

You can use an AUX port to connect

audio devices and an USB port to plug

in an USB and also in an iPod^®port.

4-2

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 3

Shark fin antenna

Antenna

NOTICE

Roof antenna

• To prevent damage to the rear

glass antenna, never use sharp

instruments or window cleaner

containing abrasives to clean

the window. Clean the inside

surface of the rear glass window

with a piece of soft cloth.

• When putting a sticker on the

inside surface of the rear win-

dow, be careful not to damage to

the rear glass antenna.

4

OTLE045237

• Do not put sharp instruments

nearby the rear glass antenna.

OTLE045330

The shark fin antenna receives

transmitted data. (for example: GPS

and DAB signals)

The roof antenna receives both AM

and FM broadcast signals. Rotate

the roof antenna in a counterclock-

wise direction to remove it. Rotate it

in a clockwise direction to reinstall it.

• Tinted rear window may affect the

proper functioning of the antenna.

4-3

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 4

Multimedia System

VOLUME (VOL + / - ) (1)

Steering wheel audio control

(if equipped)

MODE ( ) (3)

• Move the VOLUME lever up to

increase volume.

Press the MODE button to select

Radio, Disc, or AUX.

• Move the VOLUME lever down to

decrease volume.

MUTE ( ) (4, if equipped)

• Press the button to mute the

sound.

SEEK/PRESET (

/

) (2)

If the SEEK/PRESET lever is moved

up or down and held for 0.8 second

or more, it will function in the follow-

ing modes.

• Press the button again to activate

the sound.

i

Information

RADIO mode

Detailed information for audio control

buttons are described in the following

pages in this chapter.

It will function as the AUTO SEEK

select button. It will SEEK until you

release the button.

MEDIA mode

It will function as the FF/REW button.

If the SEEK/PRESET lever is moved

up or down, it will function in the fol-

lowing modes.

OTL045500L

The steering wheel audio control but-

ton is installed for your convenience.

RADIO mode

It will function as the PRESET STA-

TION UP/DOWN button.

NOTICE

MEDIA mode

It will function as the TRACK UP/

DOWN button.

Do not operate audio remote con-

trol buttons simultaneously.

4-4

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 5

Bluetooth^®Wireless Technology hands-free (if equipped)

You can use the phone wirelessly by using the Bluetooth^®Wireless Technology.

Audio / Video / Navigation sys-

tem (AVN) (if equipped)

Detailed information for the AVN sys-

tem is described in a separately sup-

plied manual.

■ Type A

4

OTL045241

■ Type B

OTL045240

(1) Call / Answer button

(2) Call end button

OTL045262

(3) Microphone

• Audio : For detailed information, refer to “AUDIO” in this chapter.

• AVN : Detailed information for the Bluetooth^®Wireless Technology hands-

free is described in the manual supplied separately.

i

Make sure that your mobile phone system is up to date to assure proper function

Information

of bluetooth connection.

4-5

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 6

Multimedia System

This can be due to factors, such as

the distance from the radio station,

closeness of other strong radio sta-

tions or the presence of buildings,

bridges or other large obstructions in

the area.

How Vehicle Audio Works

FM reception

AM reception

JBM002

AM broadcasts can be received at

greater distances than FM broad-

casts. This is because AM radio

waves are transmitted at low fre-

quencies. These long distance, low

frequency radio waves can follow the

curvature of the earth rather than

travelling straight. In addition, they

curve around obstructions resulting

in better signal coverage.

JBM001

AM and FM radio signals are broad-

cast from transmitter towers located

around your city. They are intercept-

ed by the radio antenna on your vehi-

cle. This signal is then processed by

the radio and sent to your vehicle

speakers.

When a strong radio signal has

reached your vehicle, the precise

engineering of your audio system

ensures the best possible quality

reproduction. However, in some cases

the signal coming to your vehicle may

not be strong and clear.

4-6

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 7

FM radio station

4

JBM003

JBM004

JBM005

FM broadcasts are transmitted at • Fading - As your vehicle moves • Station Swapping - As an FM signal

high frequencies and do not bend to

follow the earth's surface. Because

of this, FM broadcasts generally

begin to fade within short distances

from the station. Also, FM signals are

easily affected by buildings, moun-

tains, and obstructions.This can lead

to undesirable or unpleasant listen-

ing conditions which might lead you

to believe a problem exists with your

radio. The following conditions are

normal and do not indicate radio

trouble:

away from the radio station, the sig-

nal will weaken and sound will

begin to fade. When this occurs, we

suggest that you select another

stronger station.

weakens, another more powerful

signal near the same frequency

may begin to play. This is because

your radio is designed to lock onto

the clearest signal. If this occurs,

select another station with

stronger signal.

a

• Flutter/Static - Weak FM signals or

large obstructions between the

transmitter and your radio can dis- • Multi-Path Cancellation - Radio sig-

turb the signal causing static or flut-

tering noises to occur. Reducing the

treble level may lessen this effect

until the disturbance clears.

nals being received from several

directions can cause distortion or

fluttering. This can be caused by a

direct and reflected signal from the

same station, or by signals from two

stations with close frequencies. If

this occurs, select another station

until the condition has passed.

4-7

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 8

Multimedia System

NOTE:

Order of playing files (folders) :

Using a cellular phone or a two-

way radio

When a cellular phone is used inside

the vehicle, noise may be produced

from the audio system. This does not

mean that something is wrong with

the audio equipment. In such a case,

try to operate mobile devices as far

from the audio equipment as possible.

1. Song playing order :

sequentially.

to

2. Folder playing order :

❋ If no song file is contained in the

folder, that folder is not displayed.

CAUTION

When using a communication

system such as a cellular phone

or a radio set inside the vehicle, a

separate external antenna must

be fitted. When a cellular phone

or a radio set is used with an

internal antenna alone, it may

interfere with the vehicle's electri-

cal system and adversely affect

safe operation of the vehicle.

WARNING

Do not use a cellular phone

while driving. Stop at a safe

location to use a cellular phone.

4-8

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 9

NOTICE

WARNING

CAUTION

• Do not place beverages close to

the audio system. Spilling bever-

ages may lead to system mal-

function.

• Do not stare at the screen

while driving. Staring at the

screen for prolonged periods

of time could lead to traffic

accidents.

• Operating the device while

driving could lead to accidents

due to a lack of attention to

external surroundings. First

park the vehicle before operat-

ing the device.

• In case of product malfunction,

please contact your place of pur-

chase or After Service center.

• Do not disassemble, assem-

ble, or modify the audio sys-

tem. Such acts could result in

accidents, fire, or electric

shock.

• Adjust the volume to levels that

allow the driver to hear sounds

from outside of the vehicle.

Driving in a state where exter-

nal sounds cannot be heard

may lead to accidents.

• Placing the audio system within

an electromagnetic environment

may result in noise interference.

4

• Prevent caustic solutions such

as perfume and cosmetic oil

from contacting the dashboard

because they may cause dam-

age or discoloration.

• Using the phone while driving

may lead to a lack of attention of

traffic conditions and increase

the likelihood of accidents.

Use the phone feature after

parking the vehicle.

• Pay attention to the volume

setting when turning the

device on. A sudden output of

extreme volume upon turning

the device on could lead to

hearing impairment. (Adjust

the volume to a suitable level

before turning off the device.)

• Heed caution not to spill water

or introduce foreign objects

into the device. Such acts

could lead to smoke, fire, or

product malfunction.

4-9

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 10

Multimedia System

(Continued)

i

Information -

Using the USB

device

• Avoid contact between the USB con- • The device may not recognize the

nector with bodily parts or foreign

objects.

USB device if separately purchased

USB hubs and extension cables are

being used. Connect the USB direct-

ly with the multimedia terminal of

the vehicle.

• Connect the USB device after turning

on the engine. The USB device may

become damaged if it is already con-

nected when the ignition is turned

on.The USB device may not operate

properly if the car ignition is turned

• Repeated connecting/disconnecting

of USB devices within short periods

of time may result in product mal-

function.

• When using mass storage USB

devices with separate logical drives,

only files saved to the root drive can

be played.

on or off with the USB device con- • A strange noise may occur when dis-

nected.

connecting the USB.

• Heed caution to static electricity • Make sure to connect/disconnect

• Files may not properly operate if

application programs are installed

to the USBs.

when connecting/disconnecting USB

devices.

external USB devices with the audio

power turned off.

• Encoded MP3 Players will not be rec- • The amount of time required to rec-

• The device may not operate normal-

ly if MP3 Players, cellular phones,

digital cameras, or other electronic

devices (USB devices not recognized

as portable disk drives) are connect-

ed with the device.

ognized when connected as an exter-

nal device.

ognize the USB device may differ

depending on the type, size or file for-

mats stored in the USB. Such differ-

ences in time are not indications of

malfunctions.

• When connecting an external USB

device, the device may not properly

recognize the USB is in some states.

• The device only supports USB

devices used to play music files.

• Only products formatted with

byte/sectors under 64Kbyte will be

recognized.

• Charging through the USB may not

work for some mobile devices.

• USB images and videos are not sup-

ported.

• The device may not support normal

operation when using a USB memo-

ry type besides (Metal Cover Type)

USB Memory.

• This device recognizes USB devices

formatted in FAT 12/16/32 file for- • Do not use the USB I/F to charge

mats. This device does not recognize

files in NTFS file format.

batteries or USB accessories that

generate heat. Such acts may lead to

worsened performance or damage

to the device.

(Continued)

• Some USB devices may not be sup-

ported due to compatibility issues.

(Continued)

4-10

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 11

(Continued)

i

Information

- Using the

iPod^®device

• When the EQ features of an exter-

nal device, such as the iPod^®, and

the audio system are both active, EQ

effects could overlap and cause

sound deterioration and distortion.

• The device may not support normal

operation when using formats such

as HDD Type, CF, or SD Memory.

• iPod^®is a registered trademark of

Apple Inc.

• In order to use the iPod^®while oper-

ating the keys, you must use a dedi-

cated iPod^®cable. (the cable that is

supplied when purchasing iPod^®

/iPhone^®products)

• If the iPod^®is connected to the vehi-

cle while it is playing, a high pitch

sound could occur for approximate-

ly 1-2 seconds immediately after

connecting. If possible, connect the

iPod to the vehicle with the iPod^®

stopped/ paused.

• The device will not support files

locked by DRM (Digital Rights

Management.)

Whenever possible, turn off the EQ

feature within the external device

upon use by connecting with the

audio system.

• Noise may occur when an iPod^®or

AUX device is connected. When

such devices are not being used, dis-

connect the device for storage.

• When the iPod^®or AUX device

power is connected to the power

jack, playing the external device

may result in noise. In such cases,

disconnect the power connection

before use.

• USB memory sticks used by con-

necting an Adaptor (SD Type or CF

Type) may not be properly recog-

nized.

4

• The device may not operate proper-

ly when using USB HDDs or USBs

subject to connection failures

caused by vehicle vibrations. (e.g. i-

stick type)

• Avoid use of USB mem-

ory products that can

also be used as key

chains or mobile phone

accessories. Use of such

products may cause damage to the

USB jack.

• During ACC ON state, connecting

the iPod^®through the iPod^®cable

will charge the iPod^®through the

car audio system.

• When connecting with the iPod^®

cable, make sure to fully insert the

jack to prevent communication

interference.

• Skipping or improper operation

may occur depending on the charac-

teristics of your iPod^®/Phone^®

device.

• Connecting an MP3 device or phone

through various channels, such as

AUX/BT or Audio/ USB mode may

result in pop noises or abnormal

operation.

(Continued)

4-11

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 12

Multimedia System

(Continued)

i

Information

- Using the AUX

device

• If your iPhone^®is connected to both • Some iPod^®s may not sync with the

the Bluetooth^®Wireless Technology

and USB, the sound may not be

properly played. In your iPhone^®,

select the Dock connector or

Bluetooth^®Wireless Technology to

change the sound output (source).

System depending on its version. If

the Media is removed before the

Media is recognized, then the sys-

tem may not properly restore the

previously operated mode. (iPod^®

charging is not supported.)

• If an external device connector is

connected with the AUX terminal,

then AUX mode will automatically

operate. Once the connector is dis-

connected, the previous mode will

be restored.

• iPod mode cannot be operated when

the iPod^®cannot be recognized due

to versions that do not support com-

munication protocols.

• For fifth generation iPod^®Nano

devices, the iPod^®may not be recog-

nized when the battery level is low.

Please charge the iPod^®for use.

• AUX mode can be used only when

an external audio player (cam-

corder, car VCR, etc.) has been con-

nected.

• The AUX volume can be controlled

separately from other audio modes.

• Connecting a connector jack to the

AUX terminal without an external

device will convert the system to

AUX mode, but only output noise.

When an external device is not

being used, also remove the connec-

tor jack.

• Search/play orders shown within

the iPod^®device may differ with the

orders shown within the audio sys-

tem.

• If the iPod^®malfunctions due to an

iPod^®device defect, reset the iPod^®

and try again. (To learn more, refer to

your iPod^®manual)

• When the external device power is

connected to the power jack, play-

ing the external device may output

noise. In such cases, disconnect the

power connection before use.

(Continued)

• Fully insert the AUX cable to the

AUX jack upon use.

4-12

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 13

i

Information

- Before using

the Bluetooth^®handsfree

Information

safe driving

Information

- When connect-

®

ing a Bluetooth phone

- Precautions for

• Bluetooth^®Handsfree is a feature • Before connecting the head unit

What is Bluetooth^®?

that enables drivers to practice safe

driving. Connecting the head unit

with a Bluetooth^®phone allows the

user to conveniently make and

receive calls and use contacts.

Before using Bluetooth^®, carefully

read the contents of this user’s man-

ual.

with the mobile phone, check to see

that the mobile phone supports

Bluetooth^®features.

• Bluetooth^®refers to a short-dis-

tance wireless networking technolo-

gy which uses a 2.4GHz ~ 2.48GHz

frequency to connect various

devices within a certain distance.

• Even if the phone supports

Bluetooth^®, the phone will not be

found during device searches if the

phone has been set to hidden state

or the Bluetooth^®power is turned

off. Disable the hidden state or turn

on the Bluetooth^®power prior to

searching/connecting with the Head

unit.

• Supported within PCs, external

devices, Bluetooth^®phones, PDAs,

various electronic devices, and auto-

motive environments, Bluetooth^®

allows data to be transmitted at high

speeds without having to use a con-

nector cable.

• Bluetooth^®Handsfree refers to a

device which allows the user to con-

veniently make phone calls with

Bluetooth^®mobile phones through

the audio system.

4

• Excessive use or operations while

driving may lead to negligent driv-

ing practices and result in accidents.

Refrain from excessive operations

while driving.

• Bluetooth phone is automatically

connected when the ignition on.

• Viewing the screen for prolonged

periods of time is dangerous and

may lead to accidents. When driv-

ing, view the screen only for short

periods of time.

• If you do not want automatic con-

nection with your Bluetooth^®

device, turn off the Bluetooth^®fea-

ture within your mobile phone.

• Bluetooth^®Handsfree may not be sup-

ported in some mobile phones. To learn

more about mobile device compatibility,

visit www. hyundaiusa.com.

• The Handsfree call volume and

quality may differ depending on the

mobile phone.

(Continued)

4-13

TLe Eng 4 .qxp 2015-05-26 ¿

11:47 Page 14

Multimedia System

(Continued)

i

Information

- Using the voice

recognition

• Park the vehicle when connecting

the head unit with the mobile phone.

• Bluetooth^®connection may become

intermittently disconnected in some

mobile phones. Follow these steps to

try again.

- When driving on rugged and

uneven roads

• When using the voice recognition

feature, only commands listed with-

in the user's manual are supported.

- During severe rain (heavy rains,

windstorms)

• Phone related voice commands can

®

• Be aware that during the operation

of the voice recognition system,

pressing any key other than the

key terminate voice recognition

mode.

be used only when a Bluetooth

Wireless Technology device is con-

nected.

1.Within the mobile phone, turn the

Bluetooth^®function off/on and try

again.

• When making calls by stating a

name, the corresponding contact

must be downloaded and stored

within the audio system.

2.Turn the mobile phone power

Off/On and try again.

• For superior voice recognition per-

formance, position the microphone

used for voice recognition above the

head of the driver’s seat and main-

tain a proper position when saying

commands.

3.Completely remove the mobile

phone battery, reboot, and then

again.

®

• After downloading the Bluetooth

Wireless Technology phone book, it

takes some times to convert the

phone book data into voice informa-

tion. During this time, voice recogni-

tion may not properly operate.

4.Reboot the Audio System and try

again.

• Within the following situations,

voice recognition may not function

properly due to external sound.

5.Delete all paired devices, pair and

try again.

• Pronounce the voice commands nat-

urally and clearly as if in a normal

conversation.

- When the windows and sunroof

are open

• Handsfree call quality and volume

may differ depending on the model

of your mobile phone.

- When the wind of the cooling /

heating device is strong

- When entering and passing through

tunnels

(Continued)

4-14

Multimedia System -> Multimedia system for Your Hyundai Tucson SUV Third Generation (2016-2019)

Related Topics

Popular Owner Manuals

Latest Owner Manuals