JD eng 4a.QXP 3/4/2015 4:22 PM Page 15
Features of your vehicle
• Lock the doors by pressing the lock
button on the smart key.
Using the transmitter
Theft-alarm stage
Park the vehicle and stop the engine.
Arm the system as described below.
1.Turn off the engine and remove the
ignition key from the ignition switch.
The alarm will be activated if any of the
following occurs while the system is
armed.
After completion of the steps above,
the hazard warning lights will operate
once to indicate that the system is
armed.
• A front or rear door is opened without
using transmitter or smart key.
2.Make sure that all doors, the engine
hood and tailgate are closed and
latched.
If the tailgate or engine hood remains
opened, the hazard warning lights will
not operate and theft-alarm will not
arm. After this, if the tailgate and
engine hood are closed, the hazard
warning lights will blink once and the
theft-alarm will arm.
• The tailgate is opened without using
transmitter or smart key.
• The engine hood is opened.
3.Lock the doors by pressing the lock
button on the transmitter.
The siren will sound and the hazard
warning lights will blink continuously for
27 seconds, unless the system is dis-
armed. To turn off the system, unlock the
doors with the transmitter or smart key.
After completion of the steps above,
the hazard warning lights will blink
once to indicate that the system is
armed.
If the tailgate or engine hood remains
opened, the hazard warning lights will
not operate and theft-alarm will not
arm. After this, if the tailgate and
engine hood are closed, the hazard
warning lights will blink once and the
theft-alarm will arm.
• Do not arm the system until all pas-
sengers have left the vehicle. If the
system is armed while a passen-
ger(s) remains in the vehicle, the
alarm may be activated when the
remaining passenger(s) leave the
vehicle. If any door, tailgate or
engine hood is opened within 30
seconds after entering the armed
stage, the system is disarmed to
prevent unnecessary alarm.
4 15
English 
