2013-2018 Kia Ceed SUV Safety features of your vehicle -> Front seat User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety features of your vehicle -> Front seat for Your Kia Ceed SUV Second Generation (2013-2018)

JD eng 3.QXP 3/4/2015 2:38 PM Page 4  
Safety features of your vehicle  
WARNING - Rear seatbacks  
WARNING  
• The rear seatback must be  
securely latched. If not, passen-  
gers and objects could be thrown  
forward resulting in serious  
injury or death in the event of a  
sudden stop or collision.  
After adjusting the seat, always  
check that it is securely locked into  
place by attempting to move the  
seat forward or backward without  
using the lock release lever.  
Sudden or unexpected movement  
of the driver's seat could cause you  
to lose control of the vehicle result-  
ing in an accident.  
• Luggage and other cargo should  
be laid flat in the cargo area. If  
objects are large, heavy, or must  
be piled, they must be secured.  
Under no circumstances should  
cargo be piled higher than the  
seatbacks. Failure to follow these  
warnings could result in serious  
injury or death in the event of a  
sudden stop, collision or rollover.  
OJD032002  
Front seat  
WARNING  
• Use extreme caution so that  
hands or other objects are not  
caught in the seat mechanisms  
while the seat is moving.  
Manual adjustment  
Forward and backward  
To move the seat forward or backward:  
1. Pull the seat slide adjustment lever up  
and hold it.  
2. Slide the seat to the position you desire.  
• No passenger should ride in the  
cargo area or sit or lie on folded  
seatbacks while the vehicle is  
moving. All passengers must be  
properly seated in seats and  
restrained properly while riding.  
• Do not put a cigarette lighter on  
the floor or seat. When you oper-  
ate the seat, gas may gush out of  
the lighter and cause fire.  
3. Release the lever and make sure the  
seat is locked in place.  
• Use extreme caution when picking  
small objects trapped under the  
seats or between the seat and the  
center console. Your hands might  
be cut or injured by the sharp  
edges of the seat mechanism.  
Adjust the seat before driving, and make  
sure the seat is locked securely by trying  
to move forward and backward without  
using the lever. If the seat moves, it is not  
locked properly.  
• When resetting the seatback to  
the upright position, make sure it  
is securely latched by pushing it  
forward and backwards.  
3 4  
JD eng 3.QXP 3/4/2015 2:38 PM Page 5  
Safety features of your vehicle  
OJD032003  
OJD032004  
OJD032055  
Seatback angle  
Seat cushion height (if equipped)  
To change the height of the seat cushion,  
push the lever upwards or downwards.  
Lumbar support (if equipped)  
Turn the control knob forward or rearward  
to move the seatback to the desired  
angle.  
The lumbar support can be adjusted by  
pressing the lumbar support switch on  
the side of the seat.  
• To lower the seat cushion, push down  
the lever several times.  
1. Press the front portion of the switch to  
increase support, or the rear portion of  
the switch, to decrease support.  
• To raise the seat cushion, pull up the  
lever several times.  
2. Release the switch once it reaches the  
desired position.  
3 5  
JD eng 3.QXP 3/4/2015 2:39 PM Page 6  
Safety features of your vehicle  
Automatic adjustment (if equipped)  
CAUTION  
The driver’s seat can be adjusted by  
using the control switches located on the  
outside of the seat cushion. Before driv-  
ing, adjust the seat to the proper position  
so as to easily control the steering wheel,  
pedals and switches on the instrument  
panel.  
• The power seat is driven by an  
electric motor. Stop operating  
once the adjustment is complet-  
ed. Excessive operation may  
damage the electrical equipment.  
• When in operation, the power  
seat consumes a large amount of  
electrical power. To prevent  
unnecessary charging system  
drain, don’t adjust the power seat  
longer than necessary while the  
engine is not running.  
WARNING  
The power seat is operable with the  
ignition OFF.  
OJD032005  
Therefore, children should never be  
left unattended in the car.  
Forward and rearward  
• Do not operate two or more power  
seat control switches at the same  
time. Doing so may result in  
power seat motor or electrical  
component malfunction.  
1. Push the control switch forward or  
rearward to move the seat to the  
desired position.  
2. Release the switch once the seat  
reaches the desired position.  
3 6  
JD eng 3.QXP 3/4/2015 2:39 PM Page 7  
Safety features of your vehicle  
OJD032006  
OJD032007  
OJD032008  
Seatback angle  
Seat cushion height (if equipped)  
Lumbar support (if equipped)  
1. Push the control switch forward or  
rearward to move the seatback to the  
desired angle.  
1. Pull the front portion of the control  
switch up to raise or down to lower the  
front part of the seat cushion. Pull the  
rear portion of the control switch up to  
raise or down to lower the rear part of  
the seat cushion.  
The lumbar support can be adjusted by  
pressing the lumbar support switch on  
the side of the seat.  
2. Release the switch once the seat  
reaches the desired position.  
1. Press the front portion of the switch to  
increase support, or the rear portion of  
the switch, to decrease support.  
2. Release the switch once the seat  
reaches the desired position.  
2. Release the switch once it reaches the  
desired position.  
3 7  

Related Topics

Popular Owner Manuals