Get Safety features of your vehicle -> Using a child restraint system Guide for Kia Ceed SUV Second Generation (2013-2018)

JD eng 3.QXP 3/4/2015 2:40 PM Page 33

Safety features of your vehicle

Rearward-facing child restraint system

WARNING

WARNING - Child seat

installation

Never place a rear-facing child

restraint in the front passenger

seat, because of the danger that an

inflating passenger-side air bag

could impact the rear-facing child

restraint and kill the child.

• A child can be seriously injured

or killed in a collision if the child

restraint is not properly anchored

to the vehicle and the child is not

properly restrained in the child

restraint. Before installing the

child restraint system, read the

instructions supplied by the child

restraint system manufacturer.

CRS09

Forward-facing child restraint system

• If the seat belt does not operate

as described in this section, we

recommend that the system be

checked by an authorized Kia

dealer.

• Failure to observe this manual's

instructions regarding child

restraint system and the instruc-

tions provided with the child

restraint system could increase

the chance and/or severity of

injury in an accident.

OJD032027

Using a child restraint system

• If the vehicle headrest prevents

proper installation of a child seat

(as described in the child seat sys-

tem manual), the headrest of the

respective seating position shall

be readjusted or entirely removed.

For small children and babies, the use of

a child seat or infant seat is required. This

child seat or infant seat should be of

appropriate size for the child and should

be installed in accordance with the manu-

facturer's instructions. For safety reasons,

we recommend that the child restraint sys-

tem be used in the rear seats.

3 33

JD eng 3.QXP 3/4/2015 2:40 PM Page 34

Safety features of your vehicle

E2MS103005

OEN036101

OEN036104

Installing a child restraint system by

lap/shoulder belt

2. Fasten the lap/shoulder belt latch into

the buckle. Listen for the distinct “click”

sound.

3. Buckle the seat belt and allow the seat

belt to take up any slack. After installa-

tion of the child restraint system, try to

move it in all directions to be sure the

child restraint system is securely

installed.

To install a child restraint system on the

outboard or center rear seats, do the fol-

lowing:

Position the release button so that it is

easy to access in case of an emergency.

1. Place the child restraint system in the

seat and route the lap/shoulder belt

around or through the restraint, follow-

ing the restraint manufacturer’s

instructions. Be sure the seat belt web-

bing is not twisted.

If you need to tighten the belt, pull more

webbing toward the retractor. When you

unbuckle the seat belt and allow it to

retract, the retractor will automatically

revert back to its normal seated passen-

ger emergency locking usage condition.

3 34

JD eng 3.QXP 3/4/2015 2:40 PM Page 35

Safety features of your vehicle

Child Seat Restraint Suitability for Seat Position using the Seat Belt

- For Europe

WARNING

We recommend that

a

child

Use child safety seats that have been officially approved and are appropriate for your

children. When using the child safety seats, refer to the following table.

restraint seat be installed in the

rear seat, even if the front passen-

ger's air bag ON/OFF switch is set

to the OFF position. To ensure the

safety of your child, the front pas-

senger’s air bag must be deactivat-

ed when it should be necessary to

install a child restraint seat on the

front passenger seat in exceptional

circumstances.

Seating Position

Age Group

Rear center

(if equipped)

Front passenger

Rear outboard

0 : Up to 10 kg

(0 - 9 months)

U*

U

0+ : Up to 13 kg

(0 - 2 years)

U

I : 9 kg to 18 kg

(9 months - 4 years)

II & III : 15 kg to 36 kg

(4 - 12 years)

U : Suitable for "universal" category restraints approved for use in this mass group

U* : Suitable for "universal" category restraints approved for use just in the condition of

non-height adjustable seat or the highest position of height adjustable seat.

3 35

JD eng 3.QXP 3/4/2015 2:40 PM Page 36

Safety features of your vehicle

■ 3 Door and 5 Door

WARNING

A child can be seriously injured or

killed in a collision if the child

restraint is not properly anchored

to the car and the child is not prop-

erly restrained in the child restraint.

Always follow the child seat manu-

facturer’s instructions for installa-

tion and use.

OJD033028

■ Wagon

OJD032029

WARNING - Tether strap

1. Route the child restraint seat strap

over the seatback.

Never mount more than one child

restraint to a single tether or to a

single lower anchorage point. The

increased load caused by multiple

seats may cause the tethers or

anchorage points to break, causing

serious injury or death.

For vehicles with adjustable headrest,

route the tether strap under the head-

rest and between the headrest posts,

otherwise route the tether strap over

the top of the seatback.

2. Connect the tether strap hook to the

appropriate child restraint hook holder

and tighten to secure the seat.

OGDE032020L

Securing a child restraint seat with

“Tether Anchor” system (if equipped)

Child restraint hook holders are located

on the transverse trim behind the rear

seats (3 Door and 5 Door) or the floor

behind the rear seats (Wagon).

This symbol indicates the

position of the tether anchor.

3 36

JD eng 3.QXP 3/4/2015 2:40 PM Page 37

Safety features of your vehicle

WARNING

WARNING - Child restraint

check

Do not install a child restraint seat

at the center of the rear seat using

the tether anchors. The tether

anchors are only provided for the

left and right outboard rear seating

positions.

Check that the child restraint sys-

tem is secure by pushing and

pulling it in different directions.

Incorrectly fitted child restraints

may swing, twist, tip or separate

causing death or serious injury.

In a crash, the child restraint seat

tether anchor attachments may not

be strong enough to secure the

child restraint seat properly in the

center of the rear seat and may

break, causing serious injury or

death.

WARNING

- Child restraint anchorage

OVI039060

Securing a child restraint system

with “ISOFIX” system and “Tether

Anchorage” system (if equipped)

• Child restraint anchorages are

designed to withstand only those

loads imposed by correctly fitted

child restraints. Under no circum-

stances are they to be used for

adult seat belts or harnesses or

for attaching other items or

equipment to the vehicle.

ISOFIX is a standardised method of fit-

ting child seats that eliminates the need

to use the standard adult seat belt to

secure the seat in the vehicle. This

enables a much more secure and posi-

tive location with the added benefit of

easier and quicker installation.

• The tether strap may not work

properly if attached somewhere

other than the correct tether

anchor.

An ISOFIX-seat may only be installed if it

has vehicle-specific or universal approval

in accordance with the requirements of

ECE-R 44.

❈ ISOFIX: International Standards Origanisation FIX

3 37

JD eng 3.QXP 3/4/2015 2:40 PM Page 38

Safety features of your vehicle

Both rear outboard seats are equipped

with a pair of ISOFIX anchorages as well

as a corresponding top tether anchorage

on the floor behind the rear seats

(wagon) or the shelf behind the rear

seats (sedan). The ISOFIX anchorages

are located between seat cushion and

backrest, marked with the ISOFIX icon.

WARNING

• When using the vehicle's

"ISOFIX" system to install a child

restraint system in the rear seat,

all unused vehicle rear seat belt

metal latch plates or tabs must be

latched securely in their seat belt

buckles and the seat belt web-

bing must be retracted behind

the child restraint to prevent the

child from reaching and taking

hold of unretracted seat belts.

Unlatched metal latch plates or

tabs may allow the child to reach

the unretracted seat belts which

may result in strangulation and a

serious injury or death to the

child in the child restraint.

ISOFIX Anchor

Position Indicator

For installation, CRS ISOFIX connecters

have to engage with the vehicles ISOFIX

anchorages (listen for a CLICK, check

potential visual indicators on the CRS

and cross-check by pulling).

OJD032030

CRS with universal approval to ECE-R

44 need to be fixed additionally with a top

tether strap connected to the correspon-

ding top tether anchorage point on the

floor behind the rear seats (wagon) or the

shelf behind the rear seats (sedan).

There are ISOFIX symbols located on

the lower portion of each side of the rear

seatbacks. These symbols indicate the

position of the lower anchors for child

restraints so equipped.

• Do not place anything around the

ISOFIX anchors. Also make sure

that the seat belt is not caught in

the ISOFIX anchors.

The installing and the use of a child-seat

has to be done according to the

installing-manual, which is added to the

ISOFIX-seat.

3 38

JD eng 3.QXP 3/4/2015 2:40 PM Page 39

Safety features of your vehicle

To secure the child restraint seat

(Continued)

1. To engage the child restraint seat to

the ISOFIX anchor, insert the child

restraint seat latch into the ISOFIX

anchor. Listen for the audible “click”

sound.

WARNING

• Attach the ISOFIX or ISOFIX-com-

patible child restraint seat only to

the appropriate locations shown

in the illustration.

• Do not install a child restraint

seat at the center of the rear seat

using the vehicle's ISOFIX

anchors. The ISOFIX anchors are

only provided for the left and

right outboard rear seating posi-

tions. Do not misuse the ISOFIX

anchors by attempting to attach a

child restraint seat in the middle

of the rear seat to the ISOFIX

anchors.

• Always follow the installation and

use instructions provided by the

manufacturer of the child restraint.

CAUTION

Do not allow the rear seat belt web-

bing to get scratched or pinched by

the ISOFIX-seat latch and ISOFIX

anchor during installation.

In a crash, the child restraint seat

ISOFIX attachments may not be

strong enough to secure the child

restraint seat properly in the cen-

ter of the rear seat and may

break, causing serious injury or

death.

2. Connect the tether strap hook to the

child restraint hook holder and tighten

to secure the seat. (Refer to the previ-

ous page.)

• Do not mount more than one

child restraint to a child restraint

lower anchorage point. The

improper increased load may

cause the anchorage points or

tether anchor to break, causing

serious injury or death.

(Continued)

3 39

JD eng 3.QXP 3/4/2015 2:40 PM Page 40

Safety features of your vehicle

Child seat restraint suitability for vehicle ISOFIX positions - For Europe

Vehicle ISOFIX positions

Size Class

Fixture

Mass Group

Rear Outboard

Front Passenger

Rear Center

(Driver side)

(Passenger side)

F

G

E

ISO/L1

ISO/L2

ISO/R1

ISO/R2

ISO/R3

ISO/R2

ISO/R3

ISO/F2

ISO/F2X

ISO/F3

-

X

-

Carrycot

IL

0 : UP to 10kg

E

IL

0+ : UP to 13kg

D

C

D

C

B

IL

IL*

IL

IL*

IL

IL*

IUF

IL*

IUF

I : 9 to 18kg

B1

A

IUF = Suitable for ISOFIX forward child restraints systems of universal category approved for use in the mass group.

IL = Suitable for particular ISOFIX child restraints systems (CRS) given in the attached list. These ISOFIX CRS are those of the

"specific vehicle", "restricted" or "semi-universal" categories.

X = ISOFIX position not suitable for ISOFIX child restraint system in this mass group and/or this size class.

IL* = ISO/R3 is able to be set up only at the foremost position of the front seats.

But ISO/R3 is not able to be set up for 3 door vehicle.

3 40

JD eng 3.QXP 3/4/2015 2:40 PM Page 41

Safety features of your vehicle

Recommended child restraint systems – For Europe

ECE-R44

Approval No.

Mass Group

Name

Manufacturer

Type of Fixation

Group 0+

(0-13kg)

Baby Safe Plus II

Britax Römer

Rearward facing with ISOFIX adapter

E1 04301146

E1 04301133

Forward facing with vehicle

ISOFIX lower anchorage + Top Tether

Group 1

(9-18kg)

Duo Plus

Britax Römer

Forward facing with vehicle

3-point seat belt

CRS Manufacturer information

Britax Römer http://www.britax.com

3 41

Safety features of your vehicle -> Using a child restraint system for Your Kia Ceed SUV Second Generation (2013-2018)

Related Topics

Popular Owner Manuals

Latest Owner Manuals