2004-2010 Kia Picanto 4 Door Maintenance -> Wiper blades User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Wiper blades for Your Kia Picanto 4 Door First Generation (2004-2010)

Maintenance  
WIPER BLADES  
CAUTION  
To prevent damage to the wiper  
blades, do not use gasoline,  
kerosene, paint thinner, or other  
solvents on or near them.  
G180200AUN  
Blade replacement  
When the wipers no longer clean ade-  
quately, the blades may be worn or  
cracked, and require replacement.  
1JBA5122  
1LDA5023  
G180100AUN  
G180201AUN  
Front windshield wiper blade  
Blade inspection  
CAUTION  
1. Raise the wiper arm and turn the wiper  
blade assembly to expose the plastic  
locking clip.  
NOTICE  
To prevent damage to the wiper  
arms or other components, do not  
attempt to move the wipers manual-  
ly.  
Commercial hot waxes applied by auto-  
matic car washes have been known to  
make the windshield difficult to clean.  
CAUTION  
Do not allow the wiper arm to fall  
against the windshield, since it may  
chip or crack the windshield.  
Contamination of either the windshield or  
the wiper blades with foreign matter can  
reduce the effectiveness of the wind-  
shield wipers. Common sources of con-  
tamination are insects, tree sap, and hot  
wax treatments used by some commer-  
cial car washes. If the blades don’t wipe  
properly, clean both the window and the  
blades with a good cleaner or mild deter-  
gent, and rinse thoroughly with clean  
water.  
CAUTION  
The use of a non-specified wiper  
blade could cause wiper malfunc-  
tion and failure.  
7 37  
Maintenance  
BATTERY  
G180202AUN  
Rear window wiper blade  
To prevent damage to the wiper arms or  
other components, have an authorized  
KIA dealer replace the wiper blade.  
1JBA7037  
OSA077020  
G190100AUN  
For best battery service  
• Keep the battery securely mounted.  
• Keep the battery top clean and dry.  
• Keep the terminals and connections  
clean, tight, and coated with petroleum  
jelly or terminal grease.  
• Rinse any spilled electrolyte from the  
battery immediately with a solution of  
water and baking soda.  
1JBA7038  
2. Compress the clip and slide the blade  
assembly downward.  
3. Lift it off the arm.  
• If the vehicle is not going to be used for  
an extended time, disconnect the bat-  
tery cables.  
4. Install the blade assembly in the  
reverse order of removal.  
7 38  

Related Topics

Popular Owner Manuals