Get Features of your vehicle Guide for Kia Picanto 4 Door Third Generation (2019-2026)

Features of your vehicle 4

Features of your vehicle

Keys .................................................................................................4-5

僅 Record your key number.............................................................................. 4-5

僅 Battery replacement ....................................................................................... 4-5

僅 Remote key......................................................................................................... 4-6

僅 Smart key.............................................................................................................4-8

Immobiliser system......................................................................4-10

Theft-alarm system ..................................................................... 4-12

僅 Armed stage ..................................................................................................... 4-12

僅 Theft-alarm stage .......................................................................................... 4-13

僅 Disarmed stage ............................................................................................... 4-13

Door locks..................................................................................... 4-14

僅 Operating door locks from outside the vehicle ................................ 4-14

僅 Operating door locks from inside the vehicle ................................... 4-15

僅 Door lock/unlock features.......................................................................... 4-17

僅 Child-protector rear door lock.................................................................. 4-17

Rear Occupant Alert (ROA) system .......................................... 4-18

Tailgate ......................................................................................... 4-19

僅 Opening the tailgate ..................................................................................... 4-19

僅 Closing the tailgate........................................................................................ 4-19

Windows ....................................................................................... 4-21

僅 Power windows ...............................................................................................4-22

僅 Manual windows............................................................................................ 4-24

Bonnet...........................................................................................4-25

僅 Opening the bonnet......................................................................................4-25

僅 Bonnet open warning...................................................................................4-25

僅 Closing the bonnet ........................................................................................4-25

Fuel filler door..............................................................................4-26

僅 Opening the fuel filler door .......................................................................4-26

僅 Closing the fuel filler door..........................................................................4-27

4 Features of your vehicle

僅 Petrol reservoir in the engine room (Flex fuel vehicle,

For Brazil and Paraguay) ............................................................................4-27

Sunroof......................................................................................... 4-29

僅 Sunshade...........................................................................................................4-29

僅 Tilt open/close .................................................................................................4-29

僅 Slide open/close ............................................................................................ 4-30

僅 Automatic reversal ....................................................................................... 4-30

僅 Resetting the sunroof................................................................................... 4-31

僅 Sunroof open warning.................................................................................4-32

Steering wheel .............................................................................4-32

僅 Motor Driven Power Steering ...................................................................4-32

僅 Tilt steering .......................................................................................................4-33

僅 Heated steering wheel.................................................................................4-34

僅 Horn .....................................................................................................................4-34

Mirrors .......................................................................................... 4-35

僅 Inside rearview mirror..................................................................................4-35

僅 Outside rearview mirror..............................................................................4-35

Instrument cluster....................................................................... 4-38

僅 LCD display control.......................................................................................4-39

僅 Gauges................................................................................................................4-39

僅 Transmission shift indicator ......................................................................4-43

LCD display.................................................................................. 4-45

僅 LCD display modes ...................................................................................... 4-45

僅 Trip computer mode.................................................................................... 4-46

僅 Driving Assist mode ..................................................................................... 4-46

僅 Service mode .................................................................................................. 4-46

僅 Master warning mode..................................................................................4-47

僅 User Settings mode.......................................................................................4-47

僅 Warning messages........................................................................................ 4-51

Trip computer.............................................................................. 4-54

僅 Trip information (Trip computer) (For Type A cluster) ................ 4-54

Features of your vehicle 4

僅 Trip information (trip computer) (For Type B cluster).................. 4-55

Warning and indicator lights .................................................... 4-58

僅 Warning lights................................................................................................. 4-58

僅 Indicator Lights............................................................................................... 4-63

Lighting.........................................................................................4-67

僅 Battery saver function..................................................................................4-67

僅 Daytime running light ..................................................................................4-67

僅 Headlight escort function.......................................................................... 4-68

僅 Headlight welcome function .................................................................... 4-68

僅 Lighting control .............................................................................................. 4-68

僅 High beam operation .................................................................................. 4-70

僅 Turn signals and lane change signals.................................................. 4-70

僅 Rear fog light ................................................................................................... 4-71

僅 Headlight levelling device .......................................................................... 4-71

僅 High Beam Assist (HBA).............................................................................. 4-71

Wipers and washers ....................................................................4-74

僅 Windscreen wipers (front)..........................................................................4-75

僅 Windscreen washers (front) ......................................................................4-75

僅 Heated washer nozzle..................................................................................4-76

僅 Rear window wiper and washer switch................................................4-76

Interior light .................................................................................4-77

僅 Automatic turn off function.......................................................................4-77

僅 Map lamp/Room lamp.................................................................................4-77

僅 Luggage room lamp .................................................................................... 4-78

僅 Vanity mirror lamp ....................................................................................... 4-78

Defroster.......................................................................................4-78

僅 Rear window defroster ............................................................................... 4-78

Manual climate control system ................................................. 4-80

僅 Heating and air conditioning .................................................................... 4-81

僅 System operation .......................................................................................... 4-84

Automatic climate control system............................................ 4-86

4 Features of your vehicle

僅 Automatic heating and air conditioning ..............................................4-87

僅 Manual heating and air conditioning ....................................................4-87

僅 System operation.......................................................................................... 4-90

僅 Climate control air filter...............................................................................4-92

僅 Air Conditioning refrigerant label ...........................................................4-93

僅 Checking the amount of air conditioner refrigerant and

compressor lubricant....................................................................................4-93

僅 Sunroof inside air recirculation............................................................... 4-94

Windscreen defrosting and defogging.................................... 4-94

僅 Manual climate control system............................................................... 4-94

僅 Automatic climate control system..........................................................4-95

僅 Defogging logic...............................................................................................4-95

Storage compartments .............................................................. 4-96

僅 Centre console storage ...............................................................................4-96

僅 Glove box ..........................................................................................................4-97

僅 Luggage net holder.......................................................................................4-97

僅 Cargo area cover........................................................................................... 4-98

僅 Luggage board............................................................................................... 4-98

Interior features .......................................................................... 4-99

僅 Ashtray................................................................................................................4-99

僅 Cup holder ........................................................................................................4-99

僅 Sunvisor...........................................................................................................4-100

僅 Seat warmer ..................................................................................................4-100

僅 Air ventilation seat....................................................................................... 4-101

僅 Power outlet .................................................................................................. 4-102

僅 USB charger .................................................................................................. 4-103

僅 Floor mat anchor(s).................................................................................... 4-103

僅 Shopping bag holder................................................................................. 4-104

僅 Clothes hanger............................................................................................. 4-104

Infotainment System ................................................................ 4-105

僅 Infotainment System ................................................................................. 4-105

Features of your vehicle

Keys

Features of your vehicle

3. Replace the battery with a new bat-

tery. When replacing the battery,

Keys

make sure the battery position.

Record your key number

僅 Folding key: CR2032

僅 Smart key: CR2450

The key code number

is stamped on the key

4. Install the battery in the reverse order

code tag attached to

of removal.

the key set. Should

For transmitter replacement, Kia recom-

you lose your keys Kia recommends to

mends to visit an authorised Kia dealer/

contact an authorised Kia dealer/service

service partner.

partner. Remove the key code tag and

WARNING

store it in a safe place. Also, record the

key code number and keep it in a safe

THIS PRODUCT CONTAINS A BUT-

and handy place, but not in the vehicle.

TON BATTERY

If swallowed, a lithium button battery

Battery replacement

can cause severe or fatal injuries within

Folding key

2 hours.

Keep batteries out of reach of children.

If you think batteries may have been

swallowed or placed inside any part of

the body, seek immediate medical atten-

tion.

OCV041005L

NOTICE

Smart key

僅 The keyless entry system transmitter

is designed to give you years of trou-

ble-free use, however it can malfunc-

tion if exposed to moisture or static

electricity. If you are unsure how to

use or replace the battery, Kia recom-

mends to contact an authorised Kia

OMV033004

The transmitter uses a 3 volt lithium bat-

dealer/service partner.

tery which will normally last for several

僅 Using the wrong battery can cause

years. When replacement is necessary,

the transmitter or smart key to mal-

use the following procedure.

function. Be sure to use the correct

1. Insert a slim tool into the slot and gen-

battery.

tly pry open the transmitter centre

僅 To avoid damaging the transmitter or

cover.

smart key, don't drop it, get it wet, or

2. Using a slim tool, gently pry open the

expose it to heat or sunlight.

battery cover(For folding key).

Features of your vehicle

Keys

Tailgate open (3)

CAUTION

If you press this button for longer than a

An inappropriately disposed battery can

second, the lock will be released.

be harmful to the environment and

Once the tailgate is opened and then

human health.

closed, the tailgate will lock automati-

Dispose the battery according to your

cally.

local law(s) or regulation.

NOTICE

Remote key (if equipped)

To prevent damaging the remote key:

With a remote key, you can lock or

僅 Keep the remote key away from water

unlock the door and tailgate.

or any liquid and fire. If the inside of

the remote key gets damp (due to

drinks or moisture), or is heated, inter-

nal circuit may malfunction, excluding

the car from the warranty.

僅 Avoid dropping or throwing the

remote key.

OJAPE033090

僅 Protect the remote key from extreme

temperatures.

Lock (1)

All doors are locked if the lock button is

WARNING

pressed whilst all doors are closed.

Kia recommends to use parts for

The hazard warning lights will blink once

replacement from an authorised Kia

to indicate that all doors are locked.

dealer/service partner. If an aftermarket

However, if any door, engine bonnet or

key is used, the ignition switch may not

tailgate remains open, the hazard warn-

return to ON after START. If this hap-

ing lights will not operate. If all doors,

pens, the starter will continue to operate

engine bonnet and tailgate are closed

causing damage to the starter motor

after the lock button is pressed, the haz-

and possible fire due to excessive cur-

ard warning lights will blink once.

rent in the wiring.

Unlock (2)

All doors are unlocked if the unlock but-

ton is pressed.

The hazard warning lights will blink

twice to indicate that all doors are

unlocked.

After pressing this button, the doors will

lock automatically unless you open any

door within 30 seconds.

Features of your vehicle

Keys

Mechanical key

problem with the transmitter, Kia rec-

ommends to contact an authorised

If the remote key does not operate nor-

Kia dealer/service partner.

mally, you can lock or unlock the door

僅 If the transmitter is in close proximity

by using the mechanical key.

to your cell phone or smart phone, the

signal from the transmitter could be

blocked by normal operation of your

cell phone or smart phone. This is

especially important when the phone

is active such as making call, receiving

calls, text messaging, and/or sending/

OJAPE033091

receiving emails. Avoid placing the

To unfold the key:

transmitter and your cell phone or

僅 press the release button then the key

smart phone in the same pants or

will unfold automatically.

jacket pocket and maintain adequate

To fold the key:

distance between the two devices.

僅 fold the key manually whilst pressing

the release button.

CAUTION

僅 Keep the transmitter away from water

Do not fold the key without pressing the

or any liquid. If the keyless entry sys-

release button. This may damage the

tem is inoperative due to exposure to

key.

water or liquids, it will not be covered

by your manufacturer vehicle war-

ranty.

Transmitter precautions

僅 Keep the transmitter away from elec-

NOTICE

tromagnetic materials that blocks

The transmitter will not work if any of

electromagnetic waves to the key sur-

following occur:

face.

僅 The ignition key is in ignition switch.

CAUTION

僅 You exceed the operating distance

limit (about 10 m [30 feet]).

Changes or modifications not expressly

僅 The battery in the transmitter is weak.

approved by the party responsible for

compliance could void the user’s author-

僅 Other vehicles or objects may be

blocking the signal.

ity to operate the equipment. If the key-

less entry system is inoperative due to

僅 The weather is extremely cold.

changes or modifications not expressly

僅 The transmitter is close to a radio

approved by the party responsible for

transmitter such as a radio station or

compliance, it will not be covered by

an airport which can interfere with

your manufacturer’s vehicle warranty.

normal operation of the transmitter.

When the transmitter does not work

correctly, open and close the door

with the ignition key. If you have a

Features of your vehicle

Keys

Smart key (if equipped)

Once the tailgate is opened and then

closed, the tailgate will lock automati-

With a smart key, you can lock or unlock

cally.

a door and even start the engine without

inserting the key.

Mechanical key

When the battery of the smart key is dis-

charged or the smart key does not oper-

ate normally, the door can be locked or

unlocked using the mechanical key.

OJAPE043026L

Lock (1)

All doors are locked if the lock button is

pressed whilst all doors are closed.

The hazard warning lights will blink once

OMV033003

to indicate that all doors are locked.

To remove the mechanical key, pull the

mechanical key protective cover(1) from

However, if any door, engine bonnet or

the mechanical key.

tailgate remains open, the hazard warn-

ing lights will not operate. If all doors,

WARNING

engine bonnet and tailgate are closed

Ignition key (Smart key)

after the lock button is pressed, the haz-

Leaving children unattended in a vehicle

ard warning lights will blink once.

with the ignition key (smart key) is dan-

gerous even if the key is not in the igni-

Unlock (2)

tion switch or start button is ACC or ON

All doors are unlocked if the unlock but-

position.

ton is pressed.

Children copy adults and they could

The hazard warning lights will blink

place the key in the ignition switch or

twice to indicate that all doors are

press the start button. The ignition key

unlocked.

(smart key) would enable children to

After pressing this button, the doors will

operate power windows or other con-

lock automatically unless you open any

trols, or even make the vehicle move,

door within 30 seconds.

which could result in serious bodily

injury or even death. Never leave the

keys in your vehicle with unsupervised

Tailgate unlock/Power Tailgate

children, when the engine is running.

unlock/open(3)

If you press this button for longer than a

WARNING

second, the lock will be released or the

tailgate will be opened according to the

Kia recommends to use parts for

options of the vehicle.

replacement from an authorised Kia

dealer/service partner. If an aftermarket

key is used, the ignition switch may not

Features of your vehicle

Keys

return to ON after START. If this hap-

- Another vehicle’s smart key is

pens, the starter will continue to operate

being operated close to your vehi-

causing damage to the starter motor

cle.

and possible fire due to excessive cur-

- The smart key is not completely

rent in the wiring.

water-proof. In turn, internal circuit

damage-related malfunction may

occur when the key comes into

Smart key precautions

contact with moisture (beverage,

water etc.) or is heated. In this case,

INFORMATION

warranty repair is not available.

If the smart key is not moved for some

When the smart key does not work

time, the detection function for smart

properly, open and close the door

key operation will pause. Lift the smart

with the mechanical key. If you have a

key to activate the detection again.

problem with the smart key, Kia rec-

ommends to contact an authorised

Kia dealer/service partner.

NOTICE

僅 If the smart key is in close proximity to

僅 The mechanical key is provided sepa-

your cell phone or smart phone, the

rately as a detachable type, so please

signal from the smart key could be

always carry it in case of an emer-

blocked by normal operation of your

gency, such as a battery discharge.

cell phone or smart phone. This is

僅 If, for some reason, you happen to

especially important when the phone

lose your smart key, you will not be

is active such as making call, receiving

able to start the engine. Tow the vehi-

calls, text messaging, and/or sending/

cle, if necessary, contact a profes-

receiving emails.

sional workshop. Kia recommends to

Avoid placing the smart key and your

contact an authorised Kia dealer/ser-

cell phone or smart phone in the same

vice partner.

pants or jacket pocket and maintain

僅 A maximum of 2 smart keys can be

adequate distance between the two

registered to a single vehicle. If you

devices.

lose a smart key, Kia recommends to

僅 To lock or unlock the door by operat-

contact an authorised Kia dealer/ser-

ing the lock/unlock button from out-

vice partner.

side handle of the vehicle, make sure

僅 The smart key will not work if any of

that all doors are kept close.

the following occurs:

僅 Do not leave the smart key near

- The smart key is close to a radio

metallic objects such as golf bag,

transmitter such as a radio station

metal case and so on.

or an airport which can interfere

僅 Always carry your smart key when

with normal operation of the smart

you leave the car. An unattended

key.

smart key close to the vehicle can

- The smart key is near a cellular

cause the vehicle battery to be dis-

two-way radio system or a cellular

charged itself.

phone.

Features of your vehicle

Immobiliser system

Immobiliser system (if

僅 In case the smart key is lost, the vehi-

cle cannot be started other than with

equipped)

the registered smart key. The smart

Your vehicle may be equipped with an

key is designed to start only when the

electronic engine immobiliser system to

vehicle matches the information that

reduce the risk of unauthorised vehicle

is contained in the smart key.

use.

Therefore, if you lost your smart key,

Your immobiliser system is comprised of

tow your vehicle to your nearest an

a small transponder in the ignition key

authorised Kia dealer and have it

and electronic devices inside the vehicle.

inspected.

僅 When the smart key is left with a

Vehicles without smart key sys-

bunch of keys, the Lock/Unlock but-

tem

ton for doors and trunk can be acci-

dently pressed. Pay careful attention

With the immobiliser system, whenever

to key use.

you insert your ignition key into the igni-

tion switch and turn it to ON, it checks

僅 Tinting the vehicle windows with film,

and determines and verifies if the igni-

especially metalized film, may inter-

tion key is valid or not.

fere with receiving frequency trans-

mitted by the smart key, reducing its

If the key is valid, the engine will start.

operating range.

If the key is invalid, the engine will not

start.

CAUTION

To deactivate the immobiliser

Keep the smart key away from water or

system:

any liquid. If the keyless entry system is

inoperative due to exposure to water or

Insert the ignition key into the key cylin-

liquids, it will not be covered by your

der and turn it to the ON position.

manufacturer’s vehicle warranty.

To activate the immobiliser sys-

tem:

Turn the ignition key to the OFF position.

The immobiliser system activates auto-

matically. Without a valid ignition key for

your vehicle, the engine will not start.

Features of your vehicle

Immobiliser system

Vehicles with smart key system

may prevent the engine from being

started.

Whenever the ENGINE START/STOP

button is changed to the ON position,

the immobiliser system checks and veri-

NOTICE

fies if the key is valid or not.

If you need additional keys or lose your

If the key is valid, the engine will start.

keys, Kia recommends to visit an

If the key is invalid, the engine will not

authorised Kia dealer/service partner.

start.

CAUTION

To deactivate the immobiliser

The transponder in your ignition key is

system :

an important part of the immobiliser sys-

Change the ENGINE START/STOP but-

tem. It is designed to give years of trou-

ton to the ON position.

ble-free service, however you should

avoid exposure to moisture, static elec-

To activate the immobiliser sys-

tricity and rough handling. Immobiliser

tem :

system malfunction could occur.

Change the ENGINE START/STOP but-

ton to the OFF position. The immobiliser

CAUTION

system activates automatically. Without

Do not change, alter or adjust the

a valid smart key for your vehicle, the

immobiliser system because it could

engine will not start.

cause the immobiliser system to mal-

WARNING

function. In this case, have the system

serviced by a professional workshop. Kia

In order to prevent theft of your vehicle,

recommends to visit an authorised Kia

do not leave spare keys anywhere in

dealer/service partner.

your vehicle. Your immobiliser password

Malfunctions caused by improper alter-

is a customer unique password and

ations, adjustments or modifications to

should be kept confidential. Do not leave

the immobiliser system are not covered

this number anywhere in your vehicle.

by your vehicle manufacturer warranty.

NOTICE

When starting the engine, do not use the

key with other immobiliser keys around.

Otherwise the engine may not start or

may stop soon after it starts. Keep each

key separate in order to avoid a starting

malfunction.

CAUTION

Do not put metal accessories near the

ignition switch. Metal accessories may

interrupt the transponder signal and

Features of your vehicle

Theft-alarm system

Theft-alarm system (if

Armed stage

equipped)

Using the smart key

Vehicles equipped with a theft alarm

Park the vehicle and stop the engine.

system will have a label attached to the

Arm the system as described below.

vehicle with the following words:

1. Turn off the engine.

2. Make sure that all doors (and tailgate)

and the engine bonnet are closed and

latched.

3. Do one of the following:

僅 Lock the doors by pressing the but-

ton of the front outside door handle

with the smart key in your posses-

sion.

1. WARNING

After completion of the steps

2. SECURITY SYSTEM

above, the hazard warning lights

operate once to indicate that the

system is armed.

If any door remains open, the doors

won't lock and the chime will sound

for 3 seconds. Close the door and

try again to lock the doors.

If tailgate or engine bonnet remains

open, the hazard warning lights

won't operate and theft-alarm will

not arm. After this, if the tailgate

and engine bonnet are closed, the

This system is designed to provide pro-

hazard warning lights will blink

tection from unauthorised entry into the

once.

car. This system is operated in three

僅 Lock the doors by pressing the lock

stages: the first is the “Armed” stage, the

button on the smart key.

second is the “Theft-alarm” stage, and

After completion of the steps

the third is the “Disarmed” stage. If trig-

above, the hazard warning lights

gered, the system provides an audible

will operate once to indicate that

alarm with blinking of the hazard warn-

the system is armed.

ing lights.

If any door (and tailgate) or engine

CAUTION

bonnet remains open, the hazard

warning lights won't operate and

Do not attempt to alter this system or

theft-alarm will not arm. After this,

add other devices to it.

if all doors (and tailgate) and

engine bonnet are closed, the haz-

ard warning lights blink once.

Features of your vehicle

Theft-alarm system

Using the transmitter

The horn will sound and the hazard

warning lights will blink continuously for

Park the vehicle and stop the engine.

approximately 30 seconds. To turn off

Arm the system as described below.

the system, unlock the doors with the

1. Turn off the engine and remove the

transmitter (or smart key).

ignition key from the ignition switch.

Disarmed stage

2. Make sure that all doors (and tailgate),

The system will be disarmed when:

the engine bonnet are closed and

latched.

Transmitter

3. Lock the doors by pressing the lock

button on the transmitter.

僅 The door unlock button is pressed.

After completion of the stepsabove,

僅 The engine is started.

the hazard warning lightswill blink

僅 The ignition switch is in the “ON” posi-

once to indicate that thesystem is

tion for 30 seconds or more.

armed.

If any door (and tailgate) or engine

Smart key

bonnet remains open, the hazard

僅 The door unlock button is pressed.

warning lights won't operate and

僅 The button of the front outside door is

theft-alarm will not arm. After this, if

pressed whilst carrying the smart key.

all doors (and tailgate) and engine

僅 The engine is started.

bonnet are closed, the hazard warn-

ing lights blink once.

After the doors are unlocked, the hazard

warning lights will blink twice to indicate

僅 Do not arm the system until all pas-

that the system is disarmed.

sengers have left the vehicle. If the

system is armed whilst a passen-

After pressing the unlock button, if any

ger(s) remains in the vehicle, the

door (or tailgate) is not opened within 30

alarm may be activated when the

seconds, the system will be rearmed.

remaining passenger(s) leave the

NOTICE

vehicle. If any door, tailgate or

Non-immobiliser system

engine bonnet is opened within 30

seconds after entering the armed

僅 Avoid trying to start the engine whilst

stage, the system is disarmed to

the alarm is activated. The vehicle

prevent unnecessary alarm.

starting motor is disabled during the

theft-alarm stage.

Theft-alarm stage

If the system is not disarmed with the

The alarm will be activated if any of the

transmitter, insert the key into the

following occurs whilst the system is

ignition switch, turn the ignition switch

armed.

to the ON position and wait for 30

僅 A door is opened without using the

seconds. Then the system will be dis-

transmitter (or smart key).

armed.

僅 The tailgate is opened without using

僅 If you lose your keys, Kia recommends

the transmitter (or smart key).

to visit an authorised Kia dealer/ser-

僅 The engine bonnet is opened.

vice partner.

Features of your vehicle

Door locks

NOTICE

Operating door locks from out-

Immobiliser system

side the vehicle

僅 If the system is not disarmed with the

transmitter, insert the key into the

Mechanical key

ignition switch and start the engine.

Then the system will be disarmed.

僅 If you lose your keys, Kia recommends

to visit an authorised Kia dealer/ser-

vice partner.

CAUTION

OJAPE033099R

僅 Turn the key toward the rear of the

Do not change, alter or adjust the theft-

vehicle to lock and toward the front of

alarm system because it could cause the

the vehicle to unlock.

theft-alarm system to malfunction.

僅 If you lock/unlock the door with a key,

Have the system serviced by a profes-

the doors will lock/unlock.

sional workshop. Kia recommends to

visit an authorised Kia dealer/service

僅 Once the doors are unlocked, they

partner.

may be opened by pulling the door

handle.

Malfunctions caused by improper alter-

ations, adjustments or modifications to

僅 When closing the door, push the door

the theft-alarm system are not covered

by hand. Make sure that doors are

by your vehicle manufacturer warranty.

closed securely

Transmitter/Smart key

僅 Doors can be locked and unlocked

with the transmitter (or smart key). (if

equipped)

僅 Doors can be locked and unlocked

pressing the button of the outside

door handle with the smart key in

your possession.

僅 Once the doors are unlocked, they

may be opened by pulling the door

handle.

僅 When closing the door, push the door

by hand. Make sure that doors are

closed securely.

NOTICE

僅 In cold and wet climates, door locks

and door mechanisms may not work

properly due to freezing conditions.

Features of your vehicle

Door locks

Operating door locks from inside

僅 If the door is locked/unlocked multiple

times in rapid succession with either

the vehicle

the vehicle key or door lock switch,

With the door lock button

the system may stop operating tem-

porarily in order to protect the circuit

and prevent damage to system com-

ponents.

WARNING

僅 If you don't close the door securely,

OJAPE033001R

the door may open again.

僅 To unlock a door, pull the door lock

僅 Be careful that someone's body and

button (1) to the “Unlock” position. The

hands are not trapped when closing

red mark on the button will be visible.

the door.

僅 To lock a door, push the door lock

button (1) to the “Lock” position. If the

WARNING

door is locked properly, the red mark

on the door lock button will not be vis-

If people must spend a longer time in the

ible.

vehicle whilst it is very hot or cold out-

僅 To open a door, pull the door handle

side, there is risk of injuries or danger to

(2) outward.

life. Do not lock the vehicle from the out-

僅 If the inner door handle of the driver’s

side when there are people in it.

(or front passenger’s) door is pulled

when the door lock button is in the

CAUTION

lock position, the button will unlock

Do not frequently repeat opening and

and the door will open. (if equipped)

closing of doors, or apply excessive

僅 Front door cannot be locked if the

force to a door whilst the door closer is

ignition key is in the ignition switch (or

operating.

if the smart key is in the vehicle) and

the front door is opened.

WARNING

Door lock malfunction

If a power door lock ever fails to function

whilst you are in the vehicle, try one or

more of the following techniques to exit:

僅 Operate the door unlock feature

repeatedly (both electronic and man-

ual) whilst simultaneously pulling on

the door handle.

僅 Operate the other door locks and han-

dles, front and rear.

Features of your vehicle

Door locks

僅 Lower a front window and use the key

cles or pedestrians approaching the

to unlock the door from outside.

vehicle in the path of the door. Open-

ing a door when something is

僅 Move to the cargo area and open the

approaching can cause damage or

tailgate.

injury.

WARNING

Do not pull the inner door handle of

Unlocked vehicles

driver's (or passenger's) door whilst the

vehicle is moving.

Leaving your vehicle unlocked can

increase the risk of vehicle theft or any

possible criminal harm caused by some-

With central door lock/unlock

one hiding in your vehicle whilst you are

button

gone. Always remove the ignition key,

engage the parking brake, close all win-

dows and lock all doors when leaving

your vehicle unattended.

WARNING

Unattended children, the elderly or

OJAPE033002R

Operate by pressing the central door

pets

lock switch.

An enclosed vehicle can become

僅 When pressing the door lock button

extremely hot, causing death or severe

(1), all vehicle doors will lock.

injury such as heatstroke to unattended

children, the elderly or pets who cannot

僅 When pressing door unlock button (2),

escape the vehicle. When left or trapped

all vehicle doors will unlock.

in a hot vehicle, make sure to stay

僅 If the key is in the ignition switch (or if

hydrated and avoid sun exposure

the smart key is in the vehicle) and

through the vehicle’s windscreen. Fur-

any door is opened, the doors will not

thermore, children might operate fea-

lock even though the door lock button

tures of the vehicle that could injure

(1) of the central door lock switch is

them, or they could encounter other

pressed.

harm, possibly from someone gaining

WARNING

entry to the vehicle. Never leave children

or animals unattended in your vehicle.

Doors

僅 The doors should always be fully

closed and locked whilst the vehicle is

in motion to prevent accidental open-

ing of the door. Locked doors will also

discourage potential intruders when

the vehicle stops or slows down.

僅 Be careful when opening doors and

watch for vehicles, motorcycles, bicy-

Features of your vehicle

Door locks

Door lock/unlock features

3. Close the rear door.

To open the rear door, pull the outside

door handle (2).

Impact sensing door unlock sys-

Even though the doors may be

tem

unlocked, the rear door will not open by

All doors will automatically unlock after

pulling the inner door handle until the

an impact causes the air bags to deploy.

rear door child safety lock is unlocked.

WARNING

Speed sensing door lock system

Rear door locks

All doors will be automatically locked

after the vehicle speed exceeds 15 km/h.

If children accidentally open the rear

And all doors will be automatically

doors whilst the vehicle is in motion, they

unlocked when you turn the engine off

could fall out and be severely injured or

and when you remove the ignition key.

killed. To prevent children from opening

(if equipped)

the rear doors from the inside, the rear

door safety locks should be used when-

Child-protector rear door lock

ever children are in the vehicle.

OJAPE033003_2

The child safety lock is provided to help

prevent children from accidentally open-

ing the rear doors from inside the vehi-

rear door safety locks should be

used whenever children are in the vehi-

cle.

1. Open the rear door.

2. Insert a small flat blade tool like a

screwdriver or similar into the hole

and turn it to the lock (

) position (1).

When the child safety lock is in the

lock position, the rear door will not

open even though the inner door han-

dle is pulled.

Features of your vehicle

Rear Occupant Alert (ROA) system

Rear Occupant Alert (ROA)

CAUTION

system

The Rear Occupant Alert (ROA) system

The Rear Occupant Alert (ROA) is pro-

uses a rear door opened and closed his-

vided to help prevent exiting the vehicle

tory.

with a rear passenger left in the vehicle.

The history is reset after the driver turns

僅 When you open the front door after

off ignition normally, exits the vehicle

opening and closing the rear door and

and locks the door remotely using the

turning off the engine, the "Check rear

remote keyless entry. So even if a rear

seats" warning message appears on

door does not reopen, the ROA system

the cluster.

alert can occur.

For example, after the ROA system alert

occurs, if the driver does not lock the

door, and drives again, the alert can

occur.

WARNING

OJAPE033166L

A: Check rear seat for passengers

The door lock system may not work if

and belongings

the electrical system is compromised.

Accordingly, please train children pas-

You can activate or deactivate the ROA

sengers regarding how to open the car

from the User Settings mode in the clus-

door manually before an emergency sit-

ter LCD display.

uation arises. That way, they would be

The option can be found under the fol-

able to open the door manually in the

lowing menu:

event an emergency situation arises.

1. Press the MODE button ( ) several

times on the steering wheel until 'User

Settings' menu appears on the LCD.

2. Select 'Convenience → Rear Occupant

Alert' with the MOVE switch (

)

and the OK button on the steering

wheel.

WARNING

The Rear Occupant Alert (ROA) system

does not actually detect objects or peo-

ple in the rear seat. By using a rear door

opened and closed history, the system

informs the driver that there may be

something in the rear seat.

Features of your vehicle

Tailgate

CAUTION

Opening the tailgate

Make certain that you close the tailgate

before driving your vehicle. Possible

僅 The tailgate is locked or unlocked

damage may occur to the tailgate gas

when all doors are locked or unlocked

lifters and attached hardware if the tail-

with the transmitter (or smart key) or

gate is not closed prior to driving.

central door lock switch.

僅 If unlocked, the tailgate can be

Closing the tailgate

opened by pressing the handle and

pulling it up.

To close the tailgate, lower and push

down the tailgate firmly. Make sure that

僅 When all doors are lock if the tailgate

the tailgate is securely latched.

unlock button on the smart key is

pressed for more than 1 second, the

tailgate is unlocked. Once the tailgate

is opened and then closed, the tail-

gate is locked automatically.

OJAPE033006

WARNING

Make sure your hands, feet and other

parts of your body are safely out of the

way before closing the tailgate.

CAUTION

Make sure nothing is near the tailgate

latch and striker whilst closing the tail-

OJAPE033005_2

gate. It may damage the tailgate's latch.

* There is not the key hole.

NOTICE

WARNING

In cold and wet climates, door lock and

Exhaust fumes

door mechanisms may not work prop-

If you drive with the tailgate open, you

erly due to freezing conditions.

will draw dangerous exhaust fumes into

your vehicle which can cause serious

WARNING

injury or death to vehicle occupants.

The tailgate swings upward. Make sure

If you must drive with the tailgate open,

no objects or people are near the rear of

keep the air vents and all windows open

the vehicle when opening the tailgate.

so that additional outside air comes into

the vehicle.

Features of your vehicle

Tailgate

WARNING

Rear cargo area

Occupants should never ride in the rear

cargo area where no restraints are avail-

able. To avoid injury in the event of an

accident or sudden stops, occupants

should always be properly restrained.

WARNING

No one should be allowed to occupy the

luggage compartment of the vehicle at

any time. The luggage compartment is a

very dangerous location in the event of a

crash.

Features of your vehicle

Windows

Front/Rear

OJAPE033007R_5

1. Driver’s door power window switch

2. Front passenger’s door power window switch

3. Rear door (left) power window switch*

4. Rear door (right) power window switch*

5. Window opening and closing

6. Automatic power window up*/down* (Driver’s window)

7. Power window lock switch*

* : if equipped

NOTICE

In cold and wet climates, power windows may not work properly due to freezing con-

ditions.

Features of your vehicle

Windows

Power windows (if equipped)

Window opening and closing

The ignition switch must be in the ON

The driver’s door has a master power

position for power windows to operate.

window switch that controls all the win-

dows in the vehicle.

Each door has a power window switch

that controls the door's window. The

Up/down window

driver has a power window lock switch

which can block the operation of rear

passenger windows. The power windows

can be operated for approximately 30

seconds after the ignition key is

removed or turned to the ACC or LOCK

position. However, if the front doors

OJAPE033009R

open, the power windows cannot be

To open or close a window, press down

operated within the 30 second period

or pull up the front portion of the corre-

after ignition key removal (if equipped).

sponding switch to the first detent posi-

If the window cannot be close because it

tion (5).

is blocked by objects, remove the

Auto up/down window (if

objects and close the window.

equipped)

NOTICE

Whilst driving with the rear windows

down or with the sunroof (if equipped) in

an open (or partially open) position, your

vehicle may demonstrate a wind buffet-

ing or pulsation noise. This noise is a

normal occurrence and can be reduced

OJAPE033008R

or eliminated by taking the following

Pressing or pulling up the power window

actions. If the noise occurs with one or

switch momentarily to the second detent

both of the rear windows down, partially

position (6) completely lowers or lifts the

lower both front windows approximately

window even when the switch is

one inch. If you experience the noise

released. To stop the window at the

with the sunroof open, slightly reduce

desired position whilst the window is in

the size of the sunroof opening.

operation, pull up or press and release

the switch to the opposite direction of

the movement.

WARNING

If the power window is not operated cor-

Do not install any accessories in the area

rectly, the automatic power window sys-

of windows. It may impact jam protec-

tem must be reset as follows:

tion.

1. Turn the ignition switch to the ON

position.

2. Close the window and continue pull-

ing up window switch for at least 1

Features of your vehicle

Windows

second after the window is completely

If an object less than 4 mm (0.16 in) in

closed.

diameter is caught between the window

glass and the upper window channel,

Automatic reversal (if equipped)

the automatic reverse window may not

detect the resistance and will not stop

and reverse direction.

WARNING

The automatic reverse feature doesn't

active whilst resetting power window

ODEPV042019

system.

If the upward movement of the window

Make sure body parts or other objects

is blocked by an object or part of the

are safely out of the way before closing

body, the window will detect the resis-

the windows to avoid injuries or vehicle

tance and will stop upward movement.

damage.

The window will then lower approxi-

mately 30 cm (11.8 in) to allow the object

Power window lock button (if

to be cleared.

equipped)

If the window detects the resistance

whilst the power window switch is pulled

up continuously, the window will stop

upward movement then lower approxi-

mately 2.5 cm (1 in). And if the power

window switch is pulled up continuously

again within 5 seconds after the window

is lowered by the automatic window

OJAPE033010R

reversal feature, the automatic window

僅 The driver can disable the power win-

reversal will not operate.

dow switches on the rear passenger

doors by pressing the power window

NOTICE

lock button located on the driver’s

The automatic reverse feature for the

door to the LOCK position (pressed).

driver’s window is only active when the

僅 When the power window lock button

“auto up” feature is used by fully pulling

is in the LOCK position (pressed), the

up the switch. The automatic reverse

driver’s master control can operate all

feature will not operate if the window is

power windows.

raised using the halfway position on the

CAUTION

power window switch.

僅 To prevent possible damage to the

WARNING

power window system, do not open or

close two windows or more at the

Always check for obstructions before

same time. This will also ensure the

raising any window to avoid injuries or

longevity of the fuse.

vehicle damage.

僅 Never try to operate the main switch

on the driver's door and the individual

Features of your vehicle

Windows

door window switch in opposite direc-

僅 Do not extend a face or arms outside

tions at the same time. If this is done,

through the window opening whilst

the window will stop and cannot be

driving.

opened or closed.

Manual windows

WARNING

Windows

僅 NEVER leave the ignition key in the

vehicle with unsupervised children,

when the engine is running.

僅 NEVER leave any child unattended in

OJAPE033011

the vehicle. Even very young children

To raise or lower the window, turn the

may inadvertently cause the vehicle

window regulator handle clockwise or

to move, entangle themselves in the

counterclockwise.

windows, or otherwise injure them-

selves or others.

WARNING

僅 Always double check to make sure all

When opening or closing the windows,

arms, hands, head and other obstruc-

make sure your passenger's arms,

tions are safely out of the way before

hands and body are safely out of the

closing a window.

way.

僅 Do not allow children to play with the

power windows. Keep the driver’s

door power window lock button in the

LOCK position (pressed). Serious

injury can result from unintentional

window operation by the child.

Features of your vehicle

Bonnet

WARNING

Opening the bonnet

Hot parts

Grasp the support rod in the area

1. Pull the release lever to unlatch the

wrapped in yellow cap.

bonnet. The bonnet should pop open

slightly.

The cap will help prevent you from being

burned by hot metal when the engine is

hot.

Bonnet open warning (if

equipped)

OJAPE033012R

WARNING

Open the bonnet after turning off the

engine on a flat surface, shifting the shift

lever to the P(Park) position for Auto-

matic Transmission or to the N(Neutral)

position for Automated Manual Trans-

OJAPE033112

The warning message will appear on the

mission or to the 1st(First) gear or

LCD display when bonnet is open.

R(Reverse) for Manual Transmission,

and setting the parking brake.

The warning chime will operate when

the vehicle is being driven above 3 km/h

2. Go to the front of the vehicle, raise the

(2 mph) with the bonnet open.

bonnet slightly, push the secondary

Closing the bonnet

bonnet release lever (1) inside of the

1. Before closing the bonnet, check the

bonnet centre and lift the bonnet (2).

following:

僅 All filler caps in engine compart-

ment must be correctly installed.

僅 Gloves, rags or any other combusti-

ble material must be removed from

the engine compartment.

OJAPE033013

2. Return the support rod to its clip to

3. Pull the support rod from the bonnet.

prevent it from rattling.

4. Hold the bonnet open with the sup-

3. Lower the bonnet until it is about 30

port rod.

cm (12 inches) above the closed posi-

tion and let it drop. Make sure that it

locks into place.

4. Check that the bonnet has engaged

properly. If the bonnet can be raised

slightly, it is not properly engaged.

OJAPE033014

Features of your vehicle

Fuel filler door

Open it again and close it with a little

more force.

Opening the fuel filler door

WARNING

僅 Before closing the bonnet, ensure that

all obstructions are removed from the

bonnet opening. Closing the bonnet

with an obstruction present in the

bonnet opening may result in prop-

erty damage or severe personal

OJAPE033015R

injury.

The fuel filler door must be opened from

inside the vehicle by pulling up on the

僅 Do not leave gloves, rags or any other

fuel-filler lid opener located on the front

combustible material in the engine

floor area on the driver’s seat.

compartment. Doing so may cause a

heatinduced fire.

NOTICE

If the fuel filler door will not open

WARNING

because ice has formed around it, tap

僅 Always double check to be sure that

lightly or push on the lid to break the ice

the bonnet is firmly latched before

and release the lid. Do not pry on the lid.

driving away. If it is not latched, the

If necessary, spray around the lid with

bonnet could fly open whilst the vehi-

an approved de-icer fluid (do not use

cle is being driven, causing a total loss

radiator anti-freeze) or move the vehicle

of visibility, which might result in an

to a warm place and allow the ice to

accident.

melt.

僅 The support rod must be inserted

completely into the hole provided in

the bonnet whenever you inspect the

engine compartment. This will prevent

the bonnet from falling and possibly

injuring you.

僅 Do not move the vehicle with the

OJAPE043028R

bonnet raised. The view will be

1. Stop the engine.

blocked and the bonnet could fall or

2. To open the fuel filler door, pull up the

be damaged.

fuel filler door opener (1).

3. Pull the fuel filler door out to fully

open.

4. To remove the cap, turn the fuel tank

cap (2) counterclockwise .

5. Refuel as needed.

Features of your vehicle

Fuel filler door

subject you to the risk of fire and

WARNING

burns. Always remove the fuel cap

Before refuelling, be sure to check what

carefully and slowly. If the cap is vent-

type of fuel is used for your vehicle. If

ing fuel or if you hear a hissing sound,

you put diesel fuel into a petrol-powered

wait until the condition stops before

vehicle or petrol into a diesel-powered

completely removing the cap.

vehicle, it may affect the fuel system and

僅 Do not "top off" after the nozzle auto-

cause serious damage to the vehicle.

matically shuts off when refuelling.

僅 Always check that the fuel cap is

Closing the fuel filler door

installed securely to prevent fuel spill-

1. To install the cap, turn it clockwise

age in the event of an accident.

until it “clicks”. This indicates that the

cap is securely tightened.

WARNING

2. Close the fuel filler door and push it

Refuelling dangers

lightly and make sure that it is

Automotive fuels are flammable materi-

securely closed.

als. When refuelling, please note the fol-

Petrol reservoir in the engine

lowing guidelines carefully. Failure to

room (Flex fuel vehicle, For Brazil

follow these guidelines may result in

and Paraguay)

severe personal injury, severe burns or

If your vehicle is FFV (Flex fuel vehicle), it

death by fire or explosion.

needs to be checked and the reservoir

僅 Read and follow all warnings at the

should be filled in with the petrol for cold

gas station facility.

start when the outside temperature is

僅 Before refuelling note the location of

low (below 20°C).

the Emergency Petrol Shut-Off, if

The nominal capacity of the petrol reser-

available, at the gas station facility.

voir for cold start is 0.8 litres and the

僅 Before touching the fuel nozzle, you

reservoir is located in the engine room.

should eliminate potentially danger-

Fill in the reservoir with petrol for cold

ous static electricity discharge by

start until it reaches the MAX line. If the

touching another metal part of the

gas line overflows, clean up the over-

vehicle, a safe distance away from the

flowed fuel with the towel.

fuel filler neck, nozzle, or other gas

source.

僅 Do not get back into a vehicle once

you have begun refuelling since you

can generate static electricity by

touching, rubbing or sliding against

any item or fabric (polyester, satin,

OJAPE043029L

nylon, etc.) capable of producing

WARNING

static electricity. Static electricity dis-

charge can ignite fuel vapours result-

Refuelling

ing in rapid burning. If you must

僅 If pressurized fuel sprays out, it can

reenter the vehicle, you should once

cover your clothes or skin and thus

again eliminate potentially dangerous

Features of your vehicle

Fuel filler door

static electricity discharge by touching

CAUTION

a metal part of the vehicle, away from

僅 Make sure to refuel your vehicle

the fuel filler neck, nozzle or other

according to the "Fuel requirements"

petrol source.

on page 1-3.

僅 When using an approved portable

僅 If the fuel filler cap requires replace-

fuel container, be sure to place the

ment, please make sure that you use

container on the ground prior to

parts designed for replacement in

refuelling. Static electricity discharge

your vehicle.

from the container can ignite fuel

An incorrect fuel filler cap can result in

vapours causing a fire.

a serious malfunction of the fuel sys-

Once refuelling has begun, contact

tem or emission control system. For

with the vehicle should be maintained

more detailed information, Kia recom-

until the filling is complete.

mends to contact an authorised Kia

Use only approved portable plastic

dealer/service partner

fuel containers designed to carry and

僅 Do not spill fuel on the exterior sur-

store petrol.

faces of the vehicle. Any type of fuel

僅 Do not use cellular phones whilst

spilled on painted surfaces may dam-

refuelling. Electric current and/or elec-

age the paint.

tronic interference from cellular

僅 If the fuel filler cap requires replace-

phones can potentially ignite fuel

ment, use only Kia Genuine Parts or

vapours causing a fire.

those of an equivalent standard for

僅 When refuelling, always shut the

your vehicle. An incorrect fuel filler

engine off. Sparks produced by elec-

cap can result in a serious malfunc-

trical components related to the

tion of the fuel system or emission

engine can ignite fuel vapours caus-

control system.

ing a fire. Once refuelling is complete,

僅 After refuelling, make sure the fuel

check to make sure the filler cap and

cap is installed securely to prevent

filler door are securely closed, before

fuel spillage in the event of an acci-

starting the engine.

dent.

僅 DO NOT use matches or a lighter and

DO NOT SMOKE or leave a lit ciga-

rette in your vehicle whilst at a gas

station especially during refuelling.

Automotive fuel is highly flammable

and can, when ignited, result in fire.

僅 If a fire breaks out during refuelling,

leave the vicinity of the vehicle, and

immediately contact the manager of

the gas station and then contact the

local fire department. Follow any

safety instructions they provide.

Features of your vehicle

Sunroof

Sunroof (if equipped)

Sunshade

OJAPE033017

OSG2H041064

If your vehicle is equipped with a sun-

Use the sunshade to block direct sun-

roof, you can slide or tilt your sunroof

light coming through the sunroof glass.

with the sunroof switch located on the

Open or close the sunshade by hand.

overhead console.

NOTICE

The sunroof can only be operated when

the ignition switch or Engine Start/Stop

僅 The sunshade opens automatically

button is in the ON sunroof

when the sunroof glass is opened, but

can be operated for approximately 30

the sunshade does not close automat-

seconds after the ignition switch or

ically when the sunroof glass is closed.

Engine Start/Stop button is in the ACC or

Also, only the sunshade cannot be

LOCK/OFF position.

closed when the sunroof glass is

opened.

WARNING

僅 Do not pull the sunshade up or down,

僅 Adjust the sunroof or sunshade when

or apply excessive force as such

your vehicle stops. This could result in

action may damage the sunshade or

loss of control and an accident that

cause it to malfunction.

may cause injury, or property dam-

age.

Tilt open/close

僅 Do not leave the engine running and

the key in your vehicle with unsuper-

vised children. Unattended children

could operate the sunroof, which

could result in serious injury.

僅 Do not sit on the top of the vehicle. It

may cause injury or vehicle damage.

NOTICE

Do not operate the sunroof when roof

bars are installed on the vehicle or when

there is luggage on the roof.

OJAPE033018_3

1. Tilt open

2. Tilt close

僅 Push the sunroof switch upward, the

sunroof glass tilts open.

Features of your vehicle

Sunroof

僅 Push the sunroof switch forward

glass, push the sunroof switch rear-

when the sunroof glass is tilt opened,

ward once more. At this time, the sun-

the sunroof glass closes.

roof glass opens only whilst the switch

is pushed.

The sunroof glass tilts open or closes

whilst the switch is pushed.

NOTICE

To reduce wind noise whilst driving, we

recommend that you drive at the recom-

The sunroof glass cannot slide open and

mended position (first detent position)

tilt open at the same time. You cannot

before the maximum slide open position.

tilt the sunroof glass open whilst the

sunroof glass is slide open. Also, you

cannot slide the sunroof glass open

Automatic reversal

whilst the sunroof is tilt open. Slide open

or tilt open the sunroof glass when the

sunroof glass is completely closed.

Slide open/close

OSG2H041072

If the sunroof glass senses any obstacle

whilst it is closing automatically, it will

reverse direction then stop at a certain

position.

The auto reverse function may not work

OJAPE033019_2

僅 Push the sunroof switch rearward, the

if an object thin or soft is caught

sunshade and sunroof glass slide

between the sliding sunroof glass and

open.

sunroof sash.

Push the sunroof switch forward, only

WARNING

the sunroof glass closes.

僅 Make sure heads, hands, arms or any

僅 Push the sunroof switch forward or

other body parts or objects are out of

rearward to the first detent position,

the way before operating the sunroof.

the sunroof glass moves until the

Body parts or objects may get caught

switch is released.

causing injuries or vehicle damage.

僅 Push the sunroof switch forward or

僅 Never deliberately use your body

rearward to the second detent posi-

parts to test the automatic reversal

tion, the sunroof glass operates auto-

function. The sunroof glass may

matically (auto slide feature).

reverse direction, but there is a risk of

To stop the sunroof movement at any

injury.

point, push the sunroof switch in any

direction.

NOTICE

僅 The sunroof glass stops halfway (first

僅 Do not continue to push the sunroof

detent position) before it is fully

switch after the sunroof is fully

opened. To fully open the sunroof

Features of your vehicle

Sunroof

Resetting the sunroof

opened, closed, or tilted. Damage to

the sunroof motor could occur.

僅 Continuous operations such as slide

open/close, tilt open/close, etc. may

cause the motor or sunroof system to

malfunction.

僅 Regularly remove any accumulated

dust on the sunroof rail.

OJAPE033020

In some circumstances resetting the

僅 Dust accumulated between the sun-

sunroof operation may need to be per-

roof and roof panel can make noise

formed. Some instances where resetting

Open the sunroof and remove dust

the sunroof may be required include:

regularly using a clean cloth.

僅 When the 12-volt battery is either dis-

僅 Do not try to open the sunroof when

connected or discharged

the temperature is below freezing or

when the sunroof is covered with

僅 When the sunroof fuse is replaced

snow or ice. The sunroof may not

僅 If the sunroof one-touch AUTO OPEN/

work properly and may break if

CLOSE operation is not functioning

opened by force.

properly

僅 Do not open or drive with the sunroof

Sunroof resetting procedure:

glass open immediately after rain or

1. It is recommended to perform the

washing the vehicle. Water may wet

reset procedure with the vehicle

the interior of the vehicle.

engine running. Start the vehicle in P

僅 Do not extend any luggage outside

(Park).

the sunroof whilst driving. Vehicle

2. Make sure the sunroof glass is in the

damage may occur if the vehicle sud-

fully closed position. If the sunroof

denly stops.

glass is open, push the switch forward

until the sunroof glass is fully closed.

WARNING

3. Release the switch when the sunroof

glass is fully closed.

Do not extend your head, arms, body

parts or objects outside the sunroof

4. Push the switch forward until the sun-

whilst driving. Injuries may occur if the

roof glass moves slightly. Then

vehicle suddenly stops.

release the switch.

5. Once again push and hold the sun-

roof switch forward until the sunroof

glass slides open and close. Do not

release the switch until the operation

is completed. If you release the switch

during operation, start the procedure

again from step 2.

NOTICE

If the sunroof does not reset when the

vehicle battery is disconnected or dis-

Features of your vehicle

Steering wheel

charged, or the sunroof fuse is blown,

the sunroof may not operate normally.

Motor Driven Power Steering (if

equipped)

Sunroof open warning

Power steering uses the motor to assist

you in steering the vehicle. If the engine

is off or if the power steering system

becomes inoperative, the vehicle may

still be steered, but it will require

increased steering effort.

The motor driven power steering is con-

trolled by the power steering control unit

OJAPE033110

which senses the steering wheel torque,

If the driver turns off the engine when

steering wheel position and vehicle

the sunroof is not fully closed, the warn-

speed to command the motor.

ing chime will sound for several seconds

and the sunroof open warning will

The steering wheel becomes heavier as

appear on the cluster LCD display.

the vehicle’s speed increases and

becomes lighter as the vehicle’s speed

Close the sunroof securely when leaving

decreases for better control of the steer-

your vehicle.

ing wheel.

CAUTION

Should you notice any change in the

Make sure the sunroof is closed fully

effort required to steer during normal

when leaving your vehicle. If the sunroof

vehicle operation, have the system

is left open, rain or snow may wet the

checked by a professional workshop Kia

interior of the vehicle. Also, leaving the

recommends to visit an authorised Kia

sunroof open when the vehicle is unat-

dealer/service partner.

tended may invite theft.

NOTICE

The following symptoms may occur

during normal vehicle operation:

僅 The MDPS warning light does not illu-

minate.

僅 The steering effort is high immedi-

ately after turning the ignition switch

or the ENGINE START/STOP button

on. This happens as the system per-

forms the MDPS system diagnostics.

When the diagnostics is completed,

the steering wheel will return to its

normal condition.

僅 A click noise may be heard from the

MDPS relay after the ignition switch is

turned to the ON or LOCK position or

Features of your vehicle

Steering wheel

Tilt steering (if equipped)

the ENGINE START/STOP button is to

the ON or OFF position.

A tilt steering wheel allows you to adjust

僅 Motor noise may be heard when the

the steering wheel before you drive.

vehicle is at a stop or at a low driving

You can also raise it to give your legs

speed.

more room when you exit and enter the

僅 When abnormality is detected in the

vehicle.

motor driven power steering system,

The steering wheel should be positioned

to prevent a deadly accident, the

so that it is comfortable for you to drive,

steering assist function will stop. At

whilst permitting you to see the instru-

this time, the warning light turns on or

ment panel warning lights and gauges.

blinks on the cluster. The steering

WARNING

wheel may become difficult to control

or operate. Have your vehicle checked

僅 Never adjust the angle of the steering

immediately, after moving the vehicle

wheel whilst driving. You may lose

to a safe zone.

steering control and cause severe

僅 If the Motor Driven Power Steering

personal injury, death or accidents.

System does not operate normally,

僅 After adjusting, push the steering

the warning light will illuminate on the

wheel both up and down to be certain

instrument cluster. The steering wheel

it is locked in position.

may become difficult to control or

operate abnormally. In this case, have

the system inspected by a profes-

sional workshop. Kia recommends to

visit an authorised Kia dealer/service

partner.

僅 The steering effort increases if the

steering wheel is rotated continu-

ously when the vehicle is not in

motion. However, after a few minutes,

it will return to its normal conditions.

僅 When you operate the steering wheel

in low temperature, abnormal noise

OJAPE033021R_2

could occur. If temperature rises, the

To change the steering wheel angle, pull

noise will disappear. This is a normal

down the lock release lever (1), adjust

condition.

the steering wheel to the desired angle

僅 When the charging system warning

(2), then pull up the lock-release lever to

light comes on or the voltage is low

lock the steering wheel in place (3). Be

(When the alternator (or battery) does

sure to adjust the steering wheel to the

not operate normally or it malfunc-

desired position before driving.

tions), the steering wheel may get

heavy and become difficult to control

operate abnormally.

Features of your vehicle

Steering wheel

Heated steering wheel (if

Horn

equipped)

OJAPE033023

To sound the horn, press the horn sym-

OJAPE033022R

bols on your steering wheel. Check the

When the ignition switch is in the ON

horn regularly to be sure it operates

position, pressing the heated steering

properly.

wheel button warms the steering wheel.

The indicator on the button will illumi-

NOTICE

nate.

To sound the horn, press the area indi-

To turn the steering wheel off, press the

cated by the horn symbol on your steer-

button once again. The indicator on the

ing wheel (see illustration). The horn will

button will turn off.

operate only when this area is pressed.

It will turn off automatically approxi-

mately 30 minutes after the heated

CAUTION

steering wheel is turned on.

If you turn off the ignition within 30 min-

Do not strike the horn severely to oper-

utes after pressing the steering wheel

ate it, or hit it with your fist. Do not press

heater button, from next ignition ON, the

on the horn with a sharp-pointed object.

heater will be OFF.

CAUTION

僅 Do not install any grip to operate the

steering wheel. This causes damage

to the heated steering wheel system.

僅 When cleaning the heated steering

wheel, do not use an organic solvent

such as paint thinner, benzene, alco-

hol and petrol. Doing so may damage

the surface of the steering wheel.

僅 If the surface of steering wheel is

damaged by sharp object, damage to

the heated steering wheel compo-

nents could occur.

Features of your vehicle

Mirrors

Type B

Inside rearview mirror

Adjust the rearview mirror to centre on

the view through the rear window. Make

this adjustment before you start driving.

WARNING

OJAPE033025

Rear visibility

* (1): Day, (2): Night, (3): Day/Night lever

Do not place objects in the rear seat or

Make this adjustment before you start

cargo area which would interfere with

driving and whilst the day/night lever is

your vision through the rear window.

in the day position (1).

Pull the day/night lever (3) toward you

WARNING

(2) to reduce the glare from the head-

lights of the vehicles behind you during

Do not adjust the rearview mirror whilst

night driving.

the vehicle is moving. This could result in

Remember that you lose some rearview

loss of control, and an accident which

clarity in the night position.

could cause death, serious injury or

property damage.

Outside rearview mirror

Be sure to adjust mirror angles before

WARNING

driving.

Do not modify the inside mirror and do

Your vehicle is equipped with both left-

not install a wide mirror. It could result in

hand and right-hand outside rearview

injury, during an accident or deployment

mirrors. The mirrors can be adjusted

of the air bag.

remotely with the remote switch. The

mirror heads can be folded back to pre-

vent damage during an automatic car

Day/night rear view mirror

wash or when passing in a narrow street.

Type A

WARNING

Rearview mirrors

僅 The outside rearview mirror is convex.

Objects seen in the mirror are closer

than they appear.

僅 Use your interior rearview mirror or

OJAPE033024

direct observation to determine the

actual distance of following vehicles

when changing lanes.

CAUTION

Do not scrape ice off the mirror face; this

may damage the surface of the glass. If

Features of your vehicle

Mirrors

ice should restrict movement of the mir-

tion the selected mirror up, down, left or

ror, do not force the mirror for adjust-

right.

ment. To remove ice, use a deicer spray,

After adjustment, press the R or L button

or a sponge or soft cloth with very warm

again to prevent the inadvertent adjust-

water.

ment.

CAUTION

僅 The mirrors stop moving when they

If the mirror is jammed with ice, do not

reach the maximum adjusting angles,

adjust the mirror by force. Use an

but the motor continues to operate

approved spray de-icer (not radiator

whilst the switch is pressed. Do not

antifreeze) to release the frozen mecha-

press the switch longer than neces-

nism or move the vehicle to a warm

sary, the motor may be damaged.

place and allow the ice to melt.

僅 Do not attempt to adjust the outside

rearview mirror by hand. Doing so

WARNING

may damage the parts.

Do not adjust or fold the outside rear-

僅 When the mirror control, press exactly

view mirrors whilst the vehicle is moving.

“▲” (2) marking area. Otherwise, the

This could result in loss of control, and

mirror will move to unintended direc-

an accident which could cause death,

tion or malfunction.

serious injury or property damage.

Folding the outside rearview mir-

Remote control

ror

Electric type (if equipped)

Electric Type (if equipped)

OJAPE033029R

OJAPE033031R

The electric remote control mirror switch

To fold the outside rearview mirror,

allows you to adjust the position of the

depress the button.

left and right outside rearview mirrors.

To unfold it, depress the button again.

To adjust the position of either mirror,

CAUTION

the ignition switch should be in the ACC

position.

The electric type outside rearview mirror

To adjust the position of either mirror,

operates even though the ignition switch

press the R or L button (1) to select the

or ENGINE START/STOP button is in the

right side mirror or the left side mirror,

OFF position. However, to prevent

then press a corresponding point (▲) on

unnecessary battery discharge, do not

the mirror adjustment control (2) to posi-

Features of your vehicle

Mirrors

adjust the mirrors longer than necessary

whilst the engine is not running.

CAUTION

In case it is an electric type outside rear-

view mirror, don’t fold it by hand. It could

cause motor failure.

Manual type

OJAPE033030R

To fold outside rearview mirror, grasp

the housing of mirror and then fold it

toward the rear of the vehicle.

Features of your vehicle

Instrument cluster

Type A

OJAPE033171L

Type B

OJAPE033172L

1. Speedometer

2. Tachometer

3. Engine coolant temperature gauge

4. Fuel gauge

5. Odometer

6. Distance to empty

7. Transmission shift indicator

8. Warning and indicator lights

9. Outside temperature gauge

* The actual cluster in the vehicle may differ from the illustration. For more details,

refer to "Gauges" on page 4-39.

Features of your vehicle

Instrument cluster

LCD display control

Gauges

The LCD display modes can be changed

by using the control buttons on the

Speedometer

steering wheel.

Type A

僅 Type A

OJAPE033129

OJAPE033035

Type B

1. TRIP: TRIP button for changing

modes.

2. RESET: RESET button for resetting the

selected item.

僅 Type B

OJAPE033130

The speedometer indicates the speed of

the vehicle and is calibrated in miles per

hour (mph) and/or kilometers per hour

(km/h).

OJAPE033036_2

: MODE button for change the LCD

MODES

2. ∧/∨: MOVE scroll switch for select

the items

3. OK: SET/RESET button for set the

items or reset the items

$Features of your vehicleInstrument clusterTachometerEngine Coolant TemperatureGaugeThe tachometer indicates the approxi-mate number of engine revolutions perType Aminute (rpm).Use the tachometer to select the correctshift points and to prevent lugging and/or over-revving the AOJAPE033133LType BOJAPE033131Type BOJAPE033134LThis gauge indicates the temperature ofthe engine coolant when the ignitionswitch or ENGINE START/STOP button 033132CAUTIONCAUTIONIf the gauge pointer moves beyond theDo not operate the engine within thenormal range area toward the “130 or H”tachometer's RED , it indicates overheating thatThis may cause severe engine damage the not continue driving with an over-heated engine. If your vehicle overheats,refer to "If the engine overheats" onpage 7-7.WARNINGNever remove the radiator cap when theengine is hot. The engine coolant isunder pressure and could severely until the engine is cool before add-ing coolant to the reservoir.440$

Features of your vehicle

Instrument cluster

Tachometer

Engine Coolant Temperature

Gauge

The tachometer indicates the approxi-

mate number of engine revolutions per

Type A

minute (rpm).

Use the tachometer to select the correct

shift points and to prevent lugging and/

or over-revving the engine.

Type A

OJAPE033133L

Type B

OJAPE033131

Type B

OJAPE033134L

This gauge indicates the temperature of

the engine coolant when the ignition

switch or ENGINE START/STOP button is

ON.

OJAPE033132

CAUTION

If the gauge pointer moves beyond the

Do not operate the engine within the

normal range area toward the “130 or H”

tachometer's RED ZONE.

position, it indicates overheating that

This may cause severe engine damage.

may damage the engine.

Do not continue driving with an over-

heated engine. If your vehicle overheats,

refer to "If the engine overheats" on

page 7-7.

WARNING

Never remove the radiator cap when the

engine is hot. The engine coolant is

under pressure and could severely burn.

Wait until the engine is cool before add-

ing coolant to the reservoir.

Features of your vehicle

Instrument cluster

Fuel Gauge

cator comes close to the “0 or E (Empty)”

level.

Type A

CAUTION

Avoid driving with an extremely low fuel

level. Running out of fuel could cause

the engine to misfire damaging the cata-

lytic converter.

OJAPE033135L

Type B

Odometer

Type A

OJAPE033136L

This gauge indicates the approximate

amount of fuel remaining in the fuel

OJAPE033137

tank.

Type B

NOTICE

僅 The fuel tank capacity is given in

"Recommended lubricants and capac-

ities" on page 9-9.

僅 The fuel gauge is supplemented by a

low fuel warning light, which will illu-

OJAPE033138

minate when the fuel tank is nearly

The odometer Indicates the total dis-

empty.

tance that the vehicle has been driven

僅 On inclines or curves, the fuel gauge

and should be used to determine when

pointer may fluctuate or the low fuel

periodic maintenance should be per-

warning light may come on earlier

formed.

than usual due to the movement of

- Odometer range: 0 ~ 1,599,999 km or

fuel in the tank.

999,999 miles.

WARNING

Fuel Gauge

Running out of fuel can expose vehicle

occupants to danger.

You must stop and obtain additional fuel

as soon as possible after the warning

light comes on or when the gauge indi-

Features of your vehicle

Instrument cluster

Distance to empty

tions, driving habits, and condition of

the vehicle.

Type A

Outside Temperature Gauge

Type A

OJAPE033139

Type B

OJAPE033140

Type B

OJAPE033144L

僅 The distance to empty is the esti-

mated distance the vehicle can be

driven with the remaining fuel.

- Distance range: 1 ~ 9,999 km or 1 ~

OJAPE033141

9,999 mi.

This gauge indicates the current outside

air temperatures by 1°C (1°F).

僅 If the estimated distance is below 1

km (1 mi.), the trip computer will dis-

僅 Temperature range: - 40°C ~ 60°C (-

play “---” as distance to empty.

40°F ~ 140°F)

The outside temperature on the display

CAUTION

may not change immediately like a gen-

僅 If the vehicle is not on level ground or

eral thermometer to prevent the driver

the battery power has been inter-

from being inattentive.

rupted, the distance to empty function

To change the temperature unit (from °C

may not operate correctly.

to °F or from °F to °C)

僅 The distance to empty may differ

僅 Type A Cluster

from the actual driving distance as it

Change the trip modes to Distance To

is an estimate of the available driving

Empty mode and then press and hold

distance.

the RESET button for 5 seconds and

僅 The trip computer may not register

more.

additional fuel if less than 6 litres (1.6

僅 Type B Cluster

gallons) of fuel are added to the vehi-

The temperature unit can be changed

cle.

by using the “User Settings” mode of the

僅 The distance to empty may vary sig-

LCD display.

nificantly based on driving condi-

* For more details, refer to "LCD display"

on page 4-45.

Features of your vehicle

Instrument cluster

Transmission shift indicator

Manual Transmission Shift Indica-

tor (if equipped)

Automatic Transmission Shift

Type A

Indicator (if equipped)

Type A

OJAPE033142L

Type B

OJAPE033142

Type B

OJAPE033143L

This indicator informs which gear is

desired whilst driving to save fuel.

OJAPE033143

僅 Shifting up: ▲ 2 , ▲ 3 , ▲ 4 , ▲ 5

This indicator displays which Automatic

Transmission shift lever is selected.

僅 Shifting down: ▼ 3, ▼ 4

僅 Park : P

僅 Reverse : R

For example

僅 Neutral : N

▲ 3 : Indicates that shifting up to the 3rd

僅 Drive : D

gear is desired (currently the shift lever

僅 Sports Mode : 1, 2, 3, 4

is in the 2nd or 1st gear).

▼ 3 : Indicates that shifting down to the

3rd gear is desired (currently the shift

lever is in the 4th or 5th gear).

When the system is not working prop-

erly, the indicator is not displayed.

Features of your vehicle

Instrument cluster

Automated Manual Transmission

Shift Indicator (if equipped)

OJAPE033143

This indicator displays which Automated

Manual Transmission shift lever is

selected.

僅 Reverse: R

僅 Neutral: N

僅 Drive Mode: D1, D2, D3, D4, D5

僅 Manual Mode: 1, 2, 3, 4, 5

Automated Manual Transmission

Shift Indicator in Manual Mode (if

equipped)

OJAPE033143L

This indicator informs which gear is

desired whilst driving to save fuel.

僅 Shifting up: ▲ 2 , ▲ 3 , ▲ 4 , ▲ 5

For example

▲ 3 : Indicates that shifting up to the 3rd

gear is desired (currently the shift lever

is in the 2nd or 1st gear).

When the system is not working prop-

erly, the indicator is not displayed.

Features of your vehicle

LCD display

LCD display modes

Type A

Mode

Trip Computer

User Settings

僅

Driving distance

僅

Service interval

僅

Driving time

僅

Consumption unit

僅

Average Fuel Economy

僅

Temperature unit

Type B

Mode

Turn By

Information/Master warning

Driving Assist*

Trip Computer

User Settings

Turn(TBT)*

Drive Information

Route Guidance

Driver Assistance*

TPMS

Since Refuelling

Destination Info

Cluster

The Master Warning mode dis-

plays warning messages related

Lane Keeping Assist*

Accumulated Info

Lights*

to the vehicle when one or more

Blind-Spot Collision-

systems is not operating nor-

Avoidance Assist*

Door*

mally.

Up/Down Lane Following

Convenience*

Assist*

Units

Reset

*: if equipped

The information provided may differ depending on which functions are applicable to

your vehicle.

* For controlling the LCD modes, refer to "LCD display control" on page 4-39.

Features of your vehicle

LCD display

Trip computer mode

WARNING

Whilst driving, please do not change the

setting mode. It may distract your atten-

tion and cause the accident.

NOTICE

The information provided may differ

OJAPE033157R

A: Current Trip

depending on which functions are appli-

cable to your vehicle.

1 Trip

2 Timer

Service mode

3 Avg.

This mode reminds you of scheduled

The trip computer mode displays infor-

maintenance information.

mation related to vehicle driving param-

eters including fuel economy, tripmeter

Service in

information and vehicle speed.

* For more details, refer to "Trip com-

It calculates and displays when you need

puter" on page 4-54.

a scheduled maintenance service (mile-

age or days).

Driving Assist mode (if equipped)

If the remaining mileage or time reaches

1,500 km (900 miles) or 30 days, "Ser-

vice in" message is displayed for several

seconds each time you set the ignition

switch or ENGINE START/STOP Button

to the ON position.

OJAPE033104

Service required

This mode displays the state of:

If you do not have your vehicle serviced

僅 Lane Keeping Assist

according to the already inputted ser-

僅 Blind-Spot Collision-Avoidance Assist

vice interval, "Service required" message

僅 Lane Following Assist

is displayed for several seconds each

* For more details, refer to each system

time you set the ignition switch or

information in "Driver assistance

ENGINE START/STOP Button to the ON

guide" on page 6-3.

position.

To reset the service interval to the mile-

Setting

age and days you inputted before:

To change the Driver Assistance set-

僅 Press the OK button (RESET) for more

tings, press the OK button on the steer-

than 1 second.

ing wheel for more than 1 second when

the Driving Assist mode is displayed.

NOTICE

If any of the following conditions occurs,

the mileage and days may be incorrect.

Features of your vehicle

LCD display

User Settings mode (if equipped)

僅 The battery cable is disconnected.

僅 The battery is discharged.

Master warning mode

OJAPE033174R

In this mode, you can change the set-

tings of the instrument cluster, doors,

lamps, etc.

OJAPE033107

* The information provided may differ

This warning light informs the driver the

depending on which functions are

following situations.

applicable to your vehicle.

僅 Forward Collision-Avoidance Assist

malfunction (if equipped)

Settings only available in PARK/

僅 Forward Collision-Avoidance Assist

Settings only available with park-

radar blocked (if equipped)

ing brake engaged

僅 Blind-Spot Collision Warning malfunc-

This warning message appears if you try

tion (if equipped)

to adjust the User Settings whilst driving.

僅 Blind-Spot Collision Warning radar

僅 Automatic Transmission

blocked (if equipped)

For your safety, change the User Set-

僅 TPMS failure, low pressure (if

tings after parking the vehicle, applying

equipped), etc.

the parking brake and moving the shift

At this time, a Master Warning icon

lever to P (Park).

(

) will appear on the LCD display. If

僅 Manual Transmission

the warning situation is solved, the mas-

For your safety, change the User Set-

ter warning light will be turned off and

tings after engaging the parking brake.

the Master Warning icon will disappear.

Features of your vehicle

LCD display

1. Driver Assistance (if equipped)

Items

Explanation

僅

Country Selection

Speed Limit

僅

Speed Limit Assist/Speed Limit Warning/Speed Limit Information/Off

Warning Methods

僅

Warning Volume (High/Medium/Low)

僅 Leading vehicle departure alert

Driver Attention Warning

To select the function.

* For more details, refer to "Driver Attention Warning (DAW) (if equipped)" on page 6-50.

僅 Forward Safety

僅 Forward Safety Warning Timing - Standard/Late

* For more details, refer to "Forward Collision-Avoidance Assist (FCA) (Front Camera Only)

(if equipped)" on page 6-3/"Forward Collision-Avoidance Assist (FCA) (Sensor Fusion) (if

equipped)" on page 6-13.

僅 Lane Safety

Driving Safety

* For more details, refer to "Lane Keeping Assist (LKA) (if equipped)" on page 6-26.

僅 Blind-Spot Safety

* For more details, refer to "Blind-Spot Collision-Avoidance Assist (BCA) (if equipped)" on

page 6-31.

僅 Exit Safety

* For more details, refer to "Safe Exit Warning (SEW) (if equipped)" on page 6-39.

僅 Rear Cross-Traffic Safety

Parking safety

For more details, refer to "Rear Cross-Traffic Collision-Avoidance Assist (RCCA) (if

equipped)" on page 6-63.

* The information provided may differ depending on which systems are applicable to

your vehicle.

2. Cluster (if equipped)

Items

Explanation

Theme Selection

僅

Theme A/Theme B/Theme C

AUTO STOP Timer

僅

Link to Current Trip/Since Refuelling/Since Reset/Manual Reset

Wiper/Lights Display

To activate or deactivate the Wiper/Lights Display function.

Traffic Signs

To activate or deactivate the Traffic Signs function.

Icy Road Warning

To activate or deactivate the Icy Road Warning function.

Cluster Voice Guidance Volume

僅

0~3 Level

Welcome Sound

To activate or deactivate the Welcome Sound function.

* The information provided may differ depending on which functions are applicable

to your vehicle.

Features of your vehicle

LCD display

3. Lights (if equipped)

Items

Explanation

Illumination

僅

1~20 Level

僅

Off: The one touch turn signal function will be deactivated.

僅

3, 5, 7 flashes: The turn signal indicator will blink 3, 5, or 7 times when the turn signal

One Touch Turn Signal

lever is moved slightly.

* For more details, refer to "Lighting" on page 4-67.

Headlight Delay

To activate or deactivate the Headlight Delay function.

To activate or deactivate the High Beam Assist function.

High Beam Assist

* For more details, refer to "High Beam Assist (HBA) (if equipped)" on page 4-71.

* The information provided may differ depending on which functions are applicable

to your vehicle.

4. Door (if equipped)

Items

Explanation

僅

Enable on shift (if equipped with Automatic Transmission): All doors will be automatically locked if the

vehicle is shifted from the P (Park) position to the R (Reverse), N (Neutral), or D (Drive) position (with the

Engine ON, it is activated).

Automatically Lock

僅

Enable on speed: All doors will be automatically locked when the vehicle speed exceeds 15 km/h (9.3

mph)

僅

Off: The auto door unlock operation will be cancelled.

僅

Vehicle Off/On key out (if equipped): All doors will be automatically unlocked when the ignition key is

removed from the ignition switch or the ENGINE START/STOP button is set to the OFF position.

Automatically Unlock 僅

On shift to P (if equipped with Automatic Transmission): All doors will be automatically unlocked if the

gear is shifted to the P (Park) position (with the Engine ON, it is activated).

僅

Off: The auto door unlock operation will be cancelled.

Horn Feedback

To activate or deactivate the Horn Feedback system.

Remote Window

To activate or deactivate the remote window control.

* The information provided may differ depending on which systems are applicable to

your vehicle.

5. Convenience (if equipped)

Items

Explanation

Rear Occupant Alert

僅

To activate or deactivate the Rear Occupant Alert function will be activated.

Service Interval

僅

Enable Service Interval/Adjust Interval/Reset

僅 On door unlock / On driver approach

Welcome Light

To select the welcome light function.

僅 On door unlock / On driver approach

Welcome Mirror

To select the welcome mirror function.

Features of your vehicle

LCD display

Items

Explanation

僅 On door unlock / On driver approach

Welcome Mirror/Light

To select the welcome mirror/light function.

Auto Rear Wiper

僅

To activate or deactivate the Auto Rear Wiper function will be activated.

* The information provided may differ depending on which functions are applicable

to your vehicle.

8. Units (if equipped)

Items

Explanation

僅 km/h, MPH

Speed Unit

To select the Speed unit.

僅 °C/°F

Temperature Unit

To select the Temperature unit.

僅 Km/L, L/100Km

Fuel Economy Unit

To select the Fuel economy unit.

僅 psi, kPa, bar

Tyre Pressure Unit

To select the Tyre Pressure Unit

* The information provided may differ depending on which functions are applicable

to your vehicle.

9. Reset

Items

Explanation

You can reset the menus in the User Settings mode. All menus in the User Settings mode

Reset

are reset to factory settings, except language and service interval.

Features of your vehicle

LCD display

Warning messages

Shift to P (for smart key system

and Automatic Transmission) (if

Warning messages appear on the LCD

equipped)

to warn the driver. It is located in the

centre of the instrument cluster.

僅 This warning message illuminates if

The warning message may appear dif-

you try to turn off the engine without

ferently depending on the type of instru-

the shift lever in P (Park) position.

ment cluster and some may not show

僅 At this time, the ENGINE START/STOP

the warning message at all.

button turns to the ACC position (If

The warning message is shown in either

you press the ENGINE START/STOP

symbol, symbol and text, or text type

button once more, it will turn to the

only.

ON position).

Door, bonnet, tailgate open (if

Low Key Battery (for smart key

equipped)

system) (if equipped)

僅 This warning message illuminates if

the battery of the smart key is dis-

charged when the Engine Start/Stop

Button changes to the OFF position.

Press START button whilst turn-

OJAPE033109

ing wheel (for smart key system)

僅 This warning is displayed indicating

(if equipped)

which door, or the bonnet, or the tail-

僅 This warning message illuminates if

gate is open.

the steering wheel does not unlock

normally when the ENGINE START/

Sunroof open (if equipped)

STOP button is pressed.

僅 It means that you should press the

ENGINE START/STOP button whilst

turning the steering wheel right and

left.

Steering wheel not locked (for

OJAPE033110

smart key system) (if equipped)

僅 This warning is displayed if you turn

僅 This warning message illuminates if

off the engine when the sunroof is

the steering wheel does not lock when

open.

the ENGINE START/STOP button

changes to the OFF position.

Features of your vehicle

LCD display

Check Steering Wheel Lock Sys-

warning alarm will also sound for

tem (for smart key system) (if

approximately 5 seconds.

equipped)

僅 It means that you should always have

the smart key with you.

僅 This warning message illuminates if

the steering wheel does not lock nor-

mally when the ENGINE START/STOP

Key not detected (for smart key

button changes to the OFF position.

system) (if equipped)

僅 This warning message illuminates for

Press brake pedal to start engine

10 seconds on the cluster if you don’t

(for smart key system and Auto-

have the smart key with you or it is

matic Transmission/Automated

not detected when you press the

ENGINE START/STOP button. In this

Manual Transmission) (if

case, the immobiliser indicator light

equipped)

will blink for 10 seconds.

僅 This warning message illuminates if

the ENGINE START/STOP button

Press START button again (for

changes to the ACC position twice by

smart key system) (if equipped)

pressing the button repeatedly with-

out depressing the brake pedal.

僅 This warning message illuminates if

僅 It means that you should depress the

you can not operate the ENGINE

brake pedal to start the engine.

START/STOP button when there is a

problem with the ENGINE START/

STOP button system.

Press clutch pedal to start engine

僅 It means that you could start the

(for smart key system and Manual

engine by pressing the ENGINE

Transmission) (if equipped)

START/STOP button once more.

僅 This warning message illuminates if

僅 If the warning illuminates each time

the ENGINE START/STOP button

you press the ENGINE START/STOP

changes to the ACC position twice by

button, have the vehicle inspected by

pressing the button repeatedly with-

a professional workshop. Kia recom-

out depressing the clutch pedal.

mends to visit an authorised Kia

僅 It means that you should depress the

dealer/service partner.

clutch pedal to start the engine.

Press START button with key (for

Key not in vehicle (for smart key

smart key system) (if equipped)

system) (if equipped)

僅 This warning message illuminates if

僅 This warning message illuminates on

you press the ENGINE START/STOP

the cluster if you open or close the

button whilst the warning message

door when the ENGINE START/STOP

“Key not detected” is illuminating.

button is in the ACC or ON position

僅 At this time, the immobiliser indicator

and the smart key is not in the vehicle.

light blinks.

Especially when you close the door, a

$Features of your vehicleLCD displayCheck BRAKE SWITCH fuse (forEngine overheated (if equipped)smart key system and Automatic僅 This warning message illuminatesTransmission/Automated Manualwhen the engine coolant temperatureTransmission) (if equipped)is above 120°C (248°F). This meanthat the engine is overheated and僅 This warning message illuminates ifmay be brake switch fuse is disconnected.* If your vehicle is overheated, refer to "If僅 It means that you should replace thethe engine overheats" on page 7-7.fuse with a new one. If that is not pos-sible, you can start the engine bypressing the ENGINE START/STOPLow fuel (if equipped)button for 10 seconds in the ACCThis warning message is displayed if tank is almost out of this message is displayed, the lowShift to P or N to start engine (forfuel level warning light in the cluster will4smart key system and Automaticcome ) (if equipped)It is recommended to look for the near-est fueling station and refuel as soon僅 This warning message illuminates try to start the engine with theshift lever not in the P (Park) or N(Neutral) discharging due to exter-nal electrical devices (ifNOTICEequipped)You can start the engine with the shiftThe vehicle can detect self-discharge oflever in the N (Neutral) position. But, forthe battery due to overcurrent that isyour safety, we recommend that yougenerated by unauthorised electricalstart the engine with the shift lever in thedevices such as dashboard cameraP (Park) position.(dash cam) mounting during note that functions such asISG are limited and battery dischargeShift to N to start engine (forproblems may the warning con-smart key system and Automatedtinues even after external electricalManual Transmission) (ifdevices are removed, have your vehicleequipped)inspected by a professional workshop.僅 This warning message illuminates ifKia recommends to contact anyou try to start the engin$

Features of your vehicle

LCD display

Check BRAKE SWITCH fuse (for

Engine overheated (if equipped)

smart key system and Automatic

僅 This warning message illuminates

Transmission/Automated Manual

when the engine coolant temperature

Transmission) (if equipped)

is above 120°C (248°F). This mean

that the engine is overheated and

僅 This warning message illuminates if

may be damaged.

the brake switch fuse is disconnected.

* If your vehicle is overheated, refer to "If

僅 It means that you should replace the

the engine overheats" on page 7-7.

fuse with a new one. If that is not pos-

sible, you can start the engine by

pressing the ENGINE START/STOP

Low fuel (if equipped)

button for 10 seconds in the ACC

This warning message is displayed if the

position.

fuel tank is almost out of fuel.

When this message is displayed, the low

Shift to P or N to start engine (for

fuel level warning light in the cluster will

smart key system and Automatic

come on.

Transmission) (if equipped)

It is recommended to look for the near-

est fueling station and refuel as soon

僅 This warning message illuminates if

possible.

you try to start the engine with the

shift lever not in the P (Park) or N

(Neutral) position.

Battery discharging due to exter-

nal electrical devices (if

NOTICE

equipped)

You can start the engine with the shift

The vehicle can detect self-discharge of

lever in the N (Neutral) position. But, for

the battery due to overcurrent that is

your safety, we recommend that you

generated by unauthorised electrical

start the engine with the shift lever in the

devices such as dashboard camera

P (Park) position.

(dash cam) mounting during park-

note that functions such as

ISG are limited and battery discharge

Shift to N to start engine (for

problems may the warning con-

smart key system and Automated

tinues even after external electrical

Manual Transmission) (if

devices are removed, have your vehicle

equipped)

inspected by a professional workshop.

僅 This warning message illuminates if

Kia recommends to contact an

you try to start the engine with the

authorised Kia dealer/service partner.

shift lever not in N (Neutral) position.

NOTICE

You can start the engine with the shift

lever in the N (Neutral) position.

Features of your vehicle

Trip computer

Trip information (Trip computer)

(For Type A cluster)

The trip computer is a microcomputer-

controlled driver information system

that displays information related to driv-

OJAPE033162

ing.

Distance To Empty (1)

NOTICE

僅 The distance to empty is the esti-

Some driving information stored in the

mated distance the vehicle can be

trip computer (for example Average

driven with the remaining fuel.

Vehicle Speed) resets if the battery is

- Distance range: 1~9,999 km or

disconnected.

1~9,999 mi.

僅 If the estimated distance is below 1km

Trip Modes

(1 mi.), the trip computer will display “-

--” as distance to empty.

NOTICE

僅 If the vehicle is not on level ground or

the battery power has been inter-

rupted, the distance to empty function

may not operate correctly.

僅 The distance to empty may differ

from the actual driving distance as it

is an estimate of the available driving

distance.

僅 The trip computer may not register

additional fuel if less than 6 litres (1.6

gallons) of fuel are added to the vehi-

cle.

僅 The fuel economy and distance to

OJAPE033161L

empty may vary significantly based

A: TRIP A

on driving conditions, driving habits,

B: TRIP B

and condition of the vehicle.

1 Driving Distance

2 Driving Time

Elapsed Time (2)

3 Avg.

僅 The elapsed time is the total driving

4 Fuel Economy

time since the last elapsed time reset.

To change the trip mode, scroll the

- Time range (hh:mm): 00:00 ~

MOVE scroll switch (∧/∨) or TRIP but-

99:59

ton in the trip computer mode.

Features of your vehicle

Trip computer

Trip information (trip computer)

僅 To reset the elapsed time, press the

RESET button or OK button on the

(For Type B cluster)

steering wheel for more than 1 second

The trip computer is a microcomputer-

when the elapsed time is displayed.

controlled driver information system

that displays information related to driv-

NOTICE

ing.

Even if the vehicle is not in motion, the

NOTICE

elapsed time keeps going whilst the

engine is running.

Some driving information stored in the

trip computer resets if the battery is dis-

connected.

Average Fuel Economy (3)

僅 The average fuel economy is calcu-

lated by the total driving distance and

Trip Modes

fuel consumption since the last aver-

age fuel economy reset.

- Fuel economy range: 0 ~ 99.9 L/

100km, km/L or MPG

僅 The average fuel economy can be

reset both manually and automati-

cally

僅 Manual reset

To clear the average fuel economy man-

ually, press the RESET button or OK but-

ton on the steering wheel for more than

1 second when the average fuel econ-

omy is displayed.

NOTICE

The average fuel economy is not dis-

OJAPE033404L

played for more accurate calculation if

A: Drive Info

the vehicle does not drive more than 10

B: Since Refuelling

seconds or 300 metres (0.19 miles) since

the ignition switch or ENGINE START/

C: Accumulated Info

STOP button is turned to ON.

1 Tripmeter

2 Timer

3 Average Fuel Economy

4 Instant Fuel Economy

Features of your vehicle

Trip computer

To change the trip mode, scroll the tog-

- Off : You may set to default manu-

gle the switch (

) on the steering

ally by using the trip switch reset but-

wheel.

ton.

- After Vehicle On: The vehicle will

automatically set to default once 4

Fuel economy

hours pass after the Ignition is in OFF.

- After refuelling: After refuelling more

than 6 litres and driving over 1 km/h,

the vehicle will reset to default auto-

matically.

NOTICE

OJAPE033158R

The average fuel economy is not dis-

A: Current Trip

played for more accurate calculation if

1 Trip

the vehicle does not drive more than 10

2 Timer

seconds or 300 metres (0.2 miles) since

3 Avg.

the ignition switch or ENGINE START/

STOP button is turned to ON.

Average Fuel Economy

僅 The average fuel economy is calcu-

Instant Fuel Economy

lated by the total driving distance and

僅 This mode displays the instant fuel

fuel consumption since the last aver-

economy during the last few seconds

age fuel economy reset.

when the vehicle speed is more than 8

- Fuel economy range: 0.0 ~ 99.9 L/

km/h (5 mph).

100km, km/L or MPG

- Fuel economy range:

僅 The average fuel economy can be

0 ~ 30 L/100km, km/L or 0 ~ 50

reset both manually and automati-

MPG

cally.

僅 Manual reset

Accumulated driving information

To clear the average fuel economy

mode

manually, press the OK button on the

steering wheel for more than 1 second

This display shows the accumulated trip

when the average fuel economy is

distance (1), the total driving time (2),

displayed.

and the average fuel efficiency (3).

僅 Automatic reset

To make the average fuel economy

be reset automatically whenever

refuelling, select the "Fuel Econ.

Reset" mode in User Setting menu of

the LCD display (Refer to "LCD display

modes" on page 4-45).

OJAPE033168R

A: Since Last Reset

1 Trip

Features of your vehicle

Trip computer

2 Timer

僅 If the engine is running, even when

the vehicle is not in motion, the infor-

3 Avg.

mation will be accumulated.

僅 Accumulated information is calculated

after the vehicle has run for more

than 300 metres (0.2 miles).

僅 If you press "OK" button for more than

1 second after the Cumulative Infor-

mation is displayed, the information

will be reset.

僅 If the engine is running, even when

the vehicle is not in motion, the infor-

mation will be accumulated.

Drive Info display

This display shows the trip distance (1),

the total driving time (2), and the aver-

age fuel efficiency (3) information once

per one ignition cycle.

OJAPE033157L

A: Current Trip

1 Trip

2 Timer

3 Avg.

僅 Fuel efficiency is calculated after the

vehicle has run for more than 300

metres (0.2 miles).

僅 The Driving Information will be reset 4

hours after ignition has been turned

off. So, when the vehicle ignition is

turned on within 4 hours, the informa-

tion will not be reset.

僅 If you press "OK" button for more than

1 second after the Driving Information

is displayed, the information will be

reset.

Features of your vehicle

Warning and indicator lights

Parking Brake & Brake Fluid

Warning Light

Warning lights

NOTICE

This warning light illuminates:

Warning lights

僅 Once you set the ignition switch or

Make sure that all warning lights are

ENGINE START/STOP button to the

OFF after starting the engine. If any light

ON position.

is still ON, this indicates a situation that

- It illuminates for approximately 3

needs attention.

seconds

- It remains on if the parking brake is

applied.

僅 When the parking brake is applied.

Air Bag Warning Light

(if

僅 When the brake fluid level in the res-

equipped)

ervoir is low.

- If the warning light illuminates with

This warning light illuminates:

the parking brake released, it indi-

僅 Once you set the ignition switch or

cates the brake fluid level in reser-

ENGINE START/STOP button to the

voir is low.

ON position.

- It illuminates for approximately 6

If the brake fluid level in the res-

seconds and then goes off.

ervoir is low:

僅 When there is a malfunction with the

1. Drive carefully to the nearest safe

SRS.

location and stop your vehicle.

In this case, have the vehicle

2. With the engine stopped, check the

inspected by a professional workshop.

brake fluid level immediately and add

Kia recommends to visit an authorised

fluid as required (For more details,

Kia dealer/service partner.

refer to "Brake/clutch fluid (if

equipped)" on page 8-31). Then check

all brake components for fluid leaks. If

Seat Belt Warning Light

any leak on the brake system is still

found, the warning light remains on,

This warning light informs the driver that

or the brakes do not operate properly,

the seat belt is not fastened.

do not drive the vehicle.

* For more details, refer to "Seat belts" on

In this case, have the vehicle towed to

page 3-13.

a professional workshop and

inspected. Kia recommends to visit an

authorised Kia dealer/service partner.

Dual-diagonal braking system

Your vehicle is equipped with dualdiago-

nal braking systems. This means you still

Features of your vehicle

Warning and indicator lights

have braking on two wheels even if one

In this case, have the vehicle

of the dual systems should fail.

inspected by a professional workshop.

Kia recommends to visit an authorised

With only one of the dual systems work-

Kia dealer/service partner.

ing, more than normal pedal travel and

greater pedal pressure are required to

stop the vehicle.

Electronic Brake Force Distribu-

Also, the vehicle will not stop in as short

tion (EBD) System Warning Light

a distance with only a portion of the

(if equipped)

brake system working.

If the brakes fail whilst you are driving,

These two warning lights illumi-

shift to a lower gear for additional

nate at the same time whilst driv-

engine braking and stop the vehicle as

ing:

soon as it is safe to do so.

僅 When the ABS and regular brake sys-

WARNING

tem may not work normally.

Parking Brake & Brake Fluid Warning

In this case, have the vehicle

Light

inspected by a professional workshop.

Driving the vehicle with a warning light

Kia recommends to visit an authorised

ON is dangerous. If the Parking Brake &

Kia dealer/service partner.

Brake Fluid Warning Light illuminates

WARNING

with the parking brake released, it indi-

cates that the brake fluid level is low.

Electronic Brake force Distribution

(EBD) System Warning Light

In this case, have the vehicle inspected

by a professional workshop. Kia recom-

When both ABS and Parking Brake &

mends to visit an authorised Kia dealer/

Brake Fluid Warning Lights are on, the

service partner.

brake system will not work normally and

you may experience an unexpected and

dangerous situation during sudden

Anti-lock Brake System (ABS)

braking.

In this case, avoid high speed driving

Warning Light

(if equipped)

and abrupt braking.

Have the vehicle inspected by a profes-

This warning light illuminates:

sional workshop as soon as possible. Kia

僅 Once you set the ignition switch or

recommends to visit an authorised Kia

ENGINE START/STOP button to the

dealer/service partner.

ON position.

- It illuminates for approximately 3

NOTICE

seconds and then goes off.

Electronic Brake force Distribution

僅 When there is a malfunction with the

(EBD) System Warning Light

ABS (The normal braking system will

When the ABS Warning Light is on or

still be operational without the assis-

both ABS and Parking Brake & Brake

tance of the anti-lock brake system).

Fluid Warning Lights are on, the speed-

Features of your vehicle

Warning and indicator lights

ometer, odometer, or tripmeter may not

僅 Whenever there is a malfunction with

work. Also, the MDPS Warning Light may

either the emission control system or

illuminate and the steering effort may

the engine or the vehicle powertrain.

increase or decrease.

In this case, have the vehicle

inspected by a professional workshop.

In this case, have the vehicle inspected

Kia recommends to visit an authorised

by a professional workshop as soon as

Kia dealer/service partner.

possible.

Kia recommends to visit an authorised

CAUTION

Kia dealer/service partner.

Malfunction Indicator Lamp (MIL)

Driving with the Malfunction Indicator

Lamp (MIL) on may cause damage to

Motor Driven Power Steering

the emission control systems which

(MDPS) Warning Light

(if

could effect drivability and/or fuel econ-

omy.

equipped)

CAUTION

This warning light illuminates:

僅 Once you set the ignition switch or

Petrol Engine

ENGINE START/STOP button to the

If the Malfunction Indicator Lamp (MIL)

ON position.

illuminates, potential catalytic converter

- This indicator light comes on after

damage is possible which could result in

the ignition key is turned to the ON

loss of engine power.

position and then goes out after

In this case, have the vehicle inspected

approximately 3 seconds.

by a professional workshop as soon as

僅 When there is a malfunction with the

possible.

MDPS.

Kia recommends to visit an authorised

In this case, have the vehicle

Kia dealer/service partner.

inspected by a professional workshop.

Kia recommends to visit an authorised

Kia dealer/service partner.

Charging System Warning Light

Malfunction Indicator Lamp (MIL)

This warning light illuminates:

僅 Once you set the ignition switch or

This warning light illuminates:

ENGINE START/STOP button to the

僅 When you set the ignition switch or

ON position.

the ENGINE START/STOP button to

- It remains on until the engine is

the ON position.

started.

- The malfunction indicator light illu-

僅 When there is a malfunction with

minates for about 3 seconds and

either the alternator or electrical

then goes off.

charging system.

Features of your vehicle

Warning and indicator lights

If there is a malfunction with

Engine Oil Pressure warning light will

either the alternator or electrical

illuminate.

charging system:

1. Drive carefully to the nearest safe

Low Fuel Level Warning Light

location and stop your vehicle.

2. Turn the engine off and check the

alternator drive belt for looseness or

This warning light illuminates:

breakage.

When the fuel tank is nearly empty.

In this case, have the vehicle

inspected by a professional workshop

If the fuel tank is nearly empty:

as soon as possible.

Add fuel as soon as possible.

Kia recommends to visit an authorised

Kia dealer/service partner.

CAUTION

Low Fuel Level

Engine Oil Pressure Warning

Driving with the Low Fuel Level warning

Light

light on or with the fuel level below “0 or

E” can cause the engine to misfire and

This warning light illuminates:

damage the catalytic converter (if

equipped).

僅 Once you set the ignition switch or

ENGINE START/STOP button to the

ON position.

Low Tyre Pressure Warning Light

- It remains on until the engine is

started.

(if equipped)

僅 When the engine oil pressure is low.

僅 Drive carefully to the nearest safe

This warning light illuminates:

location and stop your vehicle.

僅 Once you set the ignition switch or

僅 Turn the engine off and check the

ENGINE START/STOP button to the

engine oil level(For more details, refer

ON position.

to "Engine Oil" section in chapter 7). If

- It illuminates for approximately 3

the level is low, add oil as required.

seconds and then goes off.

僅 If the warning light remains on after

僅 When one or more of your tyres are

adding oil or if oil is not available,

significantly underinflated.

have the vehicle inspected by a pro-

* For more details, refer to "Tyre Pres-

fessional workshop as soon as possi-

sure Monitoring System (TPMS) (if

ble. Kia recommends to visit an

equipped)" on page 7-8.

authorised Kia dealer/service partner.

Continued driving with the warning

This warning light remains on

light on may cause engine failure.

after blinking for approximately

NOTICE

70 seconds or repeats blinking

僅 When engine oil pressure decreases

due to insufficient engine oil, etc., the

Features of your vehicle

Warning and indicator lights

and off at the intervals of

This warning light blinks:

approximately 3 seconds:

僅 Red: When Forward Collision-Avoid-

ance Assist is operating.

僅 When there is a malfunction with the

TPMS.

* For more details, refer to "Forward Col-

lision-Avoidance Assist (FCA) (Front

In this case, have the vehicle

Camera Only) (if equipped)" on page

inspected by a professional workshop

6-3/"Forward Collision-Avoidance

as soon as possible.

Assist (FCA) (Sensor Fusion) (if

Kia recommends to visit an authorised

equipped)" on page 6-13.

Kia dealer/service partner.

* For more details, refer to "Tyre Pres-

sure Monitoring System (TPMS) (if

Overspeed Warning Light

(if

equipped)" on page 7-8.

equipped)

WARNING

This warning light blinks:

Safe Stopping

僅 When you drive the vehicle more than

僅 The TPMS cannot alert you to severe

120 km/h.

and sudden tyre damage caused by

external factors.

- This is to prevent you from driving

your vehicle with overspeed.

僅 If you notice any vehicle instability,

immediately take your foot off the

- The overspeed warning chime also

accelerator pedal, apply the brakes

sound for approximately 5 seconds.

gradually with light force, and slowly

move to a safe position off the road.

Master Warning Light

(if

equipped)

Forward Safety warning light

This indicator light illuminates:

(if equipped)

僅 This warning light informs the driver

the following situations

This warning light illuminates:

- Forward Collision-Avoidance Assist

僅 When the ignition switch is in the ON

malfunction (if equipped)

position. It illuminates for about 3 sec-

- Forward Collision-Avoidance Assist

onds and then goes off.

radar blocked (if equipped)

僅 Yellow: When Forward Safety is dese-

- Blind-Spot Collision-Avoidance

lected, disabled, or a malfunction is

Assist malfunction (if equipped)

detected.

- Blind-Spot Collision-Avoidance

- If the yellow warning light remains

Assist radar blocked (if equipped)

on after the sensor has been

uncovered or unblocked when For-

- TPMS failure, low pressure (if

ward Safety is set, we recommend

equipped), etc.

that your vehicle be inspected by

If the warning situation is solved, the

an Kia dealer/service partner.

master warning light will turn off.

Features of your vehicle

Warning and indicator lights

Indicator Lights

Door Ajar Warning Light

(if

equipped)

Electronic Stability Control (ESC)

Indicator Light

(if equipped)

This warning light illuminates:

When a door is not closed securely.

This indicator light illuminates:

Tailgate Open Warning Light

僅 Once you set the ignition switch or

(if equipped)

ENGINE START/STOP button to the

ON position.

This warning light illuminates:

- It illuminates for approximately 3

seconds and then goes off.

When the tailgate is not closed securely.

僅 When there is a malfunction with the

ESC system.

Icy Road Warning Light

(if

In this case, have the vehicle

equipped)

inspected by a professional workshop.

Kia recommends to visit an authorised

This warning light is to warn the driver

Kia dealer/service partner.

the road may be icy.

When the following conditions occur, the

This indicator light blinks:

warning light (including Outside Tem-

perature Gauge) blinks and then illumi-

Whilst the ESC is operating.

nates, and a warning chime sounds

* For more details, refer to "Electronic

once.

Stability Control (ESC) (if equipped)"

僅 The temperature on the Outside Tem-

on page 5-38.

perature Gauge is below approxi-

mately 4℃ (39℉).

Electronic Stability Control (ESC)

NOTICE

OFF Indicator Light

(if

If the icy road warning light appears

equipped)

whilst driving, you should drive more

attentively and safely, refraining from

This indicator light illuminates:

over-speeding, rapid acceleration, sud-

den braking or sharp turning, etc.

僅 Once you set the ignition switch or

ENGINE START/STOP button to the

ON position.

- It illuminates for approximately 3

seconds and then goes off.

僅 When you deactivate the ESC system

by pressing the ESC OFF button.

* For more details, refer to "Electronic

Stability Control (ESC) (if equipped)"

on page 5-38.

Features of your vehicle

Warning and indicator lights

Kia recommends to visit an authorised

Auto stop indicator

(if

Kia dealer/service partner.

equipped)

This indicator will illuminate when the

Immobiliser Indicator Light (With

engine enters the Idle Stop mode of the

Smart Key)

(if equipped)

ISG (Idle Stop and Go) system.

When the automatic starting occurs, the

This indicator light illuminates for

auto stop indicator on the cluster will

up to 30 seconds:

blink for 5 seconds.

僅 When the vehicle detects the smart

* For more details, refer to "ISG (Idle Stop

key in the vehicle properly whilst the

and Go) system (if equipped)" on page

ENGINE START/STOP button is ACC

5-15.

or ON.

NOTICE

- At this time, you can start the

engine.

When the engine automatically starts by

- The indicator light goes off after

the ISG system, some warning lights

starting the engine.

(ABS, ESC, ESC OFF, MDPS or Parking

brake warning light) may turn on for a

few seconds.

This indicator light blinks for a

few seconds:

This happens because of the low battery

voltage. It does not mean the system is

僅 When the smart key is not in the vehi-

malfunctioning.

cle.

- At this time, you can not start the

engine.

Immobiliser Indicator Light (With-

out Smart Key)

(if equipped)

This indicator light illuminates for

2 seconds and goes off:

This indicator light illuminates:

僅 When the vehicle can not detect the

僅 When the vehicle detects the

smart key which is in the vehicle

immobiliser in your key properly

whilst the ENGINE START/STOP but-

whilst the ignition switch is ON.

ton is ON.

- At this time, you can start the

In this case, have the vehicle

engine.

inspected by a professional workshop.

Kia recommends to visit an authorised

- The indicator light goes off after

Kia dealer/service partner.

starting the engine.

This indicator light blinks:

僅 When the battery of the smart key is

僅 When there is a malfunction with the

weak.

immobiliser system.

- At this time, you can not start the

In this case, have the vehicle

engine. However, you can start the

inspected by a professional workshop.

engine if you press the ENGINE

Features of your vehicle

Warning and indicator lights

START/STOP button with the smart

High Beam Indicator Light

key. (For more details, refer to

"ENGINE START/STOP button (if

This indicator light illuminates:

equipped)" on page 5-10).

僅 When the headlights are on and in the

僅 When there is a malfunction with the

high beam position.

immobiliser system.

僅 When the turn signal lever is pulled

In this case, have the vehicle

into the Flash-to-Pass position.

inspected by a professional workshop.

Kia recommends to visit an authorised

Kia dealer/service partner.

High Beam Assist indicator light

(if equipped)

Turn Signal Indicator Light

This indicator light appears:

This indicator light blinks:

僅 When the high beam is on with the

僅 When you turn the turn signal light on.

light switch in the AUTO light position.

If any of the following occurs, there may

僅 If your vehicle detects oncoming or

a malfunction with the turn signal sys-

preceding vehicles, High Beam Assist

tem. In this case, have the vehicle

will switch the high beam to low beam

inspected by a professional workshop.

automatically.

Kia recommends to visit an authorised

* For more details, refer to "High Beam

Kia dealer/service partner.

Assist (HBA) (if equipped)" on page 4-

僅 The indicator light does not blink but

71.

illuminates.

僅 The indicator light blinks more rapidly.

Light ON Indicator Light

僅 The indicator light does not illuminate

at all.

This indicator light illuminates:

僅 When the tail lights or headlights are

Low Beam Indicator Light

(if

on.

equipped)

Front Fog Indicator Light

(if

This indicator light illuminates:

equipped)

僅 When the headlights are on.

This indicator light illuminates:

僅 When the front fog lights are on.

Features of your vehicle

Warning and indicator lights

Cruise SET Indicator Light

(if

Rear Fog Indicator Light

(if

equipped)

This indicator light illuminates:

僅 When Cruise Control speed is set.

僅 When the rear fog lights are on.

* For more details, refer to "Cruise Con-

trol (CC) (if equipped)" on page 6-55.

Press Brake Indicator Light

Lane Safety indicator light

(for Automated Manual Trans-

(if equipped)

mission)

This indicator light illuminates :

This indicator light illuminates:

僅 [Green] When Lane Keeping Assist

僅 When changing gear position without

operating conditions are satisfied.

pressing brake pedal.

僅 [White] When Lane Keeping Assist

僅 When trying to start the engine with-

operating conditions are not satisfied.

out pressing brake pedal.

僅 [Yellow] When there is a malfunction

with Lane Keeping Assist.

Parking Brake Engaged Indicator

In this case, have the vehicle

Light

(for Automated Manual

inspected by a professional workshop.

Kia recommends to visit an authorised

Transmission)

Kia dealer/service partner.

* For more details, refer to "Lane Keeping

This indicator light illuminates:

Assist (LKA) (if equipped)" on page 6-

僅 When the engine is turned off without

26.

engaging parking brake lever, it illu-

minates for approximately 5 seconds

Exhaust system (PPF) warning

then goes off.

light (Petrol Engine)

(if

Cruise Control Indicator Light

equipped)

(if equipped)

This warning light illuminates:

This indicator light illuminates:

僅 When there is a malfunction with

僅 When Cruise Control is enabled.

Petrol Particulate Filter (PPF) system.

* For more details, refer to "Cruise Con-

僅 When this warning light illuminates, it

trol (CC) (if equipped)" on page 6-55.

may turn off after driving the vehicle:

- The vehicle should be driven for

more than 30 minutes at a speed of

80 km/h (50 mph) and faster.

- Ensure the following conditions are

all met: safe road conditions, trans-

Features of your vehicle

Lighting

mission 3rd gear or above, and

engine speed of 1,500 -4,000 rpm.

Battery saver function

If this warning light blinks in spite of the

The purpose of this feature is to prevent

procedure (at this time the LCD warning

the battery from being discharged if the

message will be displayed), have the

lights are left in the ON position. The

PPF system checked by a professional

system automatically shuts off the park-

workshop. Kia recommends to visit an

ing lights after the engine is off and the

authorised Kia dealer/service partner.

driver’s door is , the

CAUTION

position lamps stay ON even when the

driver-side door is opened if the light

Petrol Engine with PPF (if equipped)

switch is operated after the engine is

If you continue to drive with the PPF

turned necessary, to keep the

warning light blinking for a long time,

lamps on turn the position lamps OFF

the PPF system can be damaged and

and ON again using the headlamp

fuel consumption can worsen.

switch on the steering column after the

engine is turned off.

Daytime running light (if

equipped)

The Daytime Running Lights (DRL) can

make it easier for others to see the front

of your vehicle during the day. DRL can

be helpful in many different driving con-

ditions, and it is especially helpful after

dawn and before sunset.

The DRL system turns OFF when:

1. The headlight switch is on

2. The engine is off

3. The front fog light is on.

4. Engaging the Parking Brake

Features of your vehicle

Lighting

Headlight escort function (if

NOTICE

equipped)

Traffic change (for Europe)

The headlights (and/or taillights) will

The low beam light distribution is asym-

remain on for approximately 5 minutes

metric. If you go abroad to a country

after the ignition key is removed when

with opposite traffic direction , this

the engine is turned off. However, if the

asymmetric part will dazzle oncoming

driver’s door is opened and closed, the

car driver. To prevent dazzle, ECE regu-

headlights are turned off after 15 sec-

lation demand several technical solu-

onds.

tions (ex. automatic change system,

The headlights can be turned off by

adhesive sheet, down aiming). This

pressing the lock button on the transmit-

headlamps are designed not to dazzle

ter (or smart key) twice or turning off the

opposite drivers. So, you need not

light switch from the headlight or Auto

change your headlamps in a country

light position.

with opposite traffic direction.

CAUTION

Lighting control

If the driver gets out of the vehicle

through other doors (except driver's

door), the battery saver function does

not operate and the headlight escort

function does not turn off automatically.

Therefore, It causes the battery to be

discharged. In this case, make sure to

turn off the lamp before getting out of

OJAPE033405L

the vehicle.

Headlight welcome function (if

equipped)

When the headlight switch is in the ON

or AUTO position and all doors (and tail-

OJAPE033407L

gate) are closed and locked, if you press

the door unlock button on the transmit-

ter (or smart key), the headlights will

come on for about 15 seconds.

If the headlight switch is in the AUTO

position, the function can only operate at

OJAPE033078R

night.

The light switch has a Headlight and a

At this time, if you press the door unlock

Parking light position.

button again or door lock button on the

To operate the lights, turn the knob at

transmitter (or smart key), the head-

the end of the control lever to one of the

lights will turn off immediately.

following positions:

1. OFF (O): Off position

Features of your vehicle

Lighting

Auto light position (if equipped)

2. AUTO: Auto light position (if

equipped)

: Position & Tail lamp

: Head light

Position & Tail lamp (

)

OJAPE033079R

When the light switch is set to AUTO and

vehicle is ON postion, the light turns ON

or OFF depending on the ambient

brightness detected by the sensor.

The auto light is an auxiliary function for

OJAPE033086R

the driver. The driver is responsible for

When the light switch is in the parking

operating the headlights for safety. We

light position (3 rd position), the tail posi-

recommend that you turn on the lights

tion, license and instrument panel lights

manually when visibility conditions are

will turn ON.

poor. (e.g. tunnels, underground parking

lots, bad weather conditions)

Headlight position (

)

CAUTION

僅 Never place anything over sensor (1)

located on the instrument panel, this

will ensure better auto-light system

control.

僅 In fog, snow, rain, and cloudy weather,

the vehicle's illuminance is not always

OJAPE033087R

constant, so the time it takes to turn

When the light switch is in the headlight

on and off may vary depending on

position (4 th position), the head, tail,

the climate, season, and surrounding

position, license and instrument panel

environment.

lights are ON.

僅 Don’t clean the sensor using a window

cleaner, the cleanser may leave a light

NOTICE

film which could interfere with sensor

The ignition switch must be in the ON

operation.

position to turn on the headlights.

僅 If your vehicle has window tint or

other types of metallic coating on the

front windscreen, the Auto light sys-

tem may not work properly.

Features of your vehicle

Lighting

High beam operation

Turn signals and lane change sig-

nals

OJAPE033408R

To turn on the high beam headlights,

OJAPE033080R

push the lever away from you when the

The ignition switch must be on for the

headlight is on. Pull it back for low

turn signals to function. To turn on the

beams.

turn signals, move the lever up or down

(A).

The high beam indicator will light when

the headlight high beams are switched

The green arrow indicators on the

on. To prevent the battery from being

instrument panel indicate which turn

discharged, do not leave the lights on for

signal is operating. They will self cancel

a prolonged time whilst the engine is not

after a turn is completed.

running.

If the indicator continues to flash after a

turn, manually return the lever to the off

position.

To signal a lane change, move the turn

signal lever slightly and hold it in posi-

tion (B). The lever will return to the off

position when released.

OJAPE033409R

If an indicator stays on and does not

To flash the headlights, pull the lever

flash or if it flashes abnormally, one of

towards you. It will return to the normal

the turn signal bulbs may be burned out

(low beam) position when released. The

and will require replacement.

headlight switch does not need to be on

One-touch lane change function

to use this flashing feature.

(if equipped)

WARNING

To activate an one-touch lane change

Do not use high beam when there are

function, move the turn signal lever

other vehicles. Using high beam could

slightly and then release it. The lane

obstruct the other driver's vision.

change signals will blink 3 ~ 7 times. The

signal times can be changed at the lights

under the User Settings Mode.

NOTICE

If an indicator flash is abnormally quick

or slow, a bulb may be burned out or

have a poor electrical connection in the

circuit.

Features of your vehicle

Lighting

Rear fog light (if equipped)

other than those listed below, adjust the

switch position so that the beam level

may be the nearest as the condition

obtained according to the list.

Loading condition

Switch position

Driver only

Driver + Front passenger

OJAPE033400R

To turn the rear fog lights on, turn the

Full passengers (including driver)

rear fog light switch (1) to the on position

Full passengers (including driver) +

Maximum permissible loading

when the headlight is turned on.

Driver + Maximum permissible

Also, the rear fog lights turn on when the

rear fog light switch is turned on after

High Beam Assist (HBA) (if

the front fog light switch (if equipped) is

equipped)

turned on and the headlight switch is in

the park light position.

To turn off the fog lights, turn the fog

light switch (1) to the Off position.

NOTICE

Rear fog light is only on the driver’s side

OJAPE033410R

(if equipped).

High Beam Assist is a function that auto-

matically adjusts the headlamp range

Headlight levelling device (if

(switches between high beam and low

equipped)

beam) depending on the brightness of

detected vehicles and certain road con-

ditions.

Detecting sensor

Front view camera

OJAPE033041R

To adjust the headlight beam level

according to the number of the passen-

gers and loading weight in the luggage

area, turn the beam levelling switch.

The higher the number of the switch

position, the lower the headlight beam

OJAPE053001

level. Always keep the headlight beam at

The front view camera is used as a

the proper levelling position, or head-

detecting sensor to detect ambient light

lights may dazzle other road users.

and brightness whilst driving.

Listed below are the examples of proper

Refer to the picture above for the

switch settings. For loading conditions

detailed location of the detecting sensor.

Features of your vehicle

Lighting

High Beam Assist operation

NOTICE

僅 Always keep the front view camera in

Display and control

good condition to maintain optimal

performance of High Beam Assist.

僅 After selecting HBA (High Beam

Assist) in the Settings menu, High

僅 For more details on the precautions of

Beam Assist will operate by following

the front view camera, refer to "For-

the procedure below.

ward Collision-Avoidance Assist (FCA)

(Front Camera Only) (if equipped)" on

- Place the headlamp switch in the

page 6-3, "Forward Collision-Avoid-

AUTO position and push the head-

ance Assist (FCA) (Sensor Fusion) (if

lamp lever towards the instrument

equipped)" on page 6-13.

cluster. The High Beam Assist (

)

indicator light will appear on the

High Beam Assist Setting

cluster and the function will be

enabled.

- When the function is enabled, high

beam may turn on when vehicle

speed is above 30 km/h (20 mph).

When vehicle speed is below 20

km/h (12 mph), high beam will not

turn on.

OJAPE033175R

- The High Beam ( ) indicator light

will appear on the cluster when

high beam is on.

僅 When High Beam Assist is operating,

if the headlamp lever or switch is

used, the function operates as follows:

OJAPE043048R

- If the headlamp lever is pulled

A: Vehicle Settings

towards you when the high beam is

1 Lights

off, the high beam will turn on with-

2 High Beam Assist

out High Beam Assist cancelled.

With the vehicle in the ON position,

When you let go of the headlamp

select User Settings → Lights → High

lever, High Beam Assist will turn on

Beam Assist in the instrument cluster, or

again.

select Settings → Vehicle → Lights →

- If you push the light switch towards

High Beam Assist in the Infotainment

the instrument cluster, high beam is

system to turn on High Beam Assist

turned on and High Beam Assist is

function.

turned off.

WARNING

- If the headlamp lever is pulled

towards you when the high beam is

For your safety, change the Settings

on by High Beam Assist, low beam

after parking the vehicle at a safe loca-

will be on and the function will turn

tion.

off.

Features of your vehicle

Lighting

- If the headlamp switch is placed

僅 Headlamp of a vehicle is covered with

from AUTO to another position

dust, snow or water.

(headlamp/position/off), High

僅 A vehicle's headlamps are off but the

Beam Assist will turn off and the

fog lamps are on and etc.

corresponding lamp will turn on.

僅 There is a lamp that has a similar

僅 When High Beam Assist is operating,

shape as a vehicle's lamp.

high beam switches to low beam if

僅 Headlamps have been damaged or

any of the following conditions occur:

not repaired properly.

- When the headlamp of an oncom-

僅 Headlamps are not aimed properly.

ing vehicle is detected.

僅 Driving on a narrow curved road,

- When the taillamp of a vehicle in

rough road, uphill or downhill.

front is detected.

僅 Vehicle in front is partially visible on a

- When the headlamp or taillamp of a

crossroad or curved road.

motorcycle or a bicycle is detected.

僅 There is a traffic light, reflecting sign,

- When the surrounding ambient

flashing sign or mirror ahead.

light is bright enough that high

僅 There is a temporary reflector or flash

beams are not required.

ahead (construction area).

- When streetlights or other lights are

僅 The road conditions are bad such as

detected.

being wet, iced or covered with snow.

High Beam Assist malfunction

僅 A vehicle suddenly appears from a

and limitations

curve.

僅 The vehicle is tilted from a flat tyre or

High Beam Assist malfunction

is being towed.

僅 Light from a vehicle is not detected

because of smoke, fog, snow, etc.

NOTICE

僅 Depending on the instrument cluster

specification or theme, images or

OJAPE043047R

colours may be displayed differently.

A: Check High Beam Assist system

僅 For more details on the limitations of

When High Beam Assist is not working

the front view camera, refer to "For-

properly, the warning message will

ward Collision-Avoidance Assist (FCA)

appear and warning light (

) will

(Front Camera Only) (if equipped)" on

appear on the cluster. Have the function

page 6-3, "Forward Collision-Avoid-

inspected by an authorised Kia dealer.

ance Assist (FCA) (Sensor Fusion) (if

Limitations of High Beam Assist

equipped)" on page 6-13.

High Beam Assist may not work properly

NOTICE

in the following situations:

僅 Light from a vehicle is not detected

僅 At times, High Beam Assist may not

because of lamp damage, or because

work properly. The function is for your

it is hidden from sight, etc.

convenience only. It is the responsibil-

Features of your vehicle

Wipers and washers

ity of the driver for safe driving prac-

tices and always check the road

conditions for your safety.

Front

僅 When High Beam Assist does not

operate normally, change the head-

lamp position manually between high

beam and low beam.

OJAPE043032L

OJAPE043035L

OJAPE043032R

A: Wiper speed control (front)

1. 2/HI – High wiper speed

2. 1/LO – Low wiper speed

3. ---/INT – Intermittent wipe

4. O/OFF – Off

5. ∨/1X – Single wipe

B: Intermittent control wipe time

adjustment

C: Wash with brief wipes (front)*

Features of your vehicle

Wipers and washers

Rear (if equipped)

NOTICE

If there is heavy accumulation of snow

or ice on the windscreen, defrost the

windscreen for about 10 minutes, or

until the snow and/or ice is removed

before using the windscreen wipers to

ensure proper operation. If you do not

OJAPE043036L

remove the snow and/or ice before

using the wiper and washer, it may dam-

age the wiper and washer system.

Windscreen washers (front)

OJAPE043037L

OJAPE043030R

In the O (Off) position, pull the lever gen-

OJAPE043036R

tly toward you to spray washer fluid on

D: Rear wiper/washer control*

the windscreen and to run the wipers 1-3

/ON – Intermittent wipe

cycles.

7. O/OFF – Off

Use this function when the windscreen is

E: Wash with brief wipes (rear)

dirty.

* : if equipped

The spray and wiper operation will con-

tinue until you release the lever.

Windscreen wipers (front)

If the washer does not work, check the

Operates as follows when the ignition

washer fluid level. If the fluid level is not

switch is turned ON.

sufficient, you will need to add appropri-

1. 2/HI: Fast wiper speed

ate non-abrasive windscreen washer

2. 1/LO: Normal wiper speed

fluid to the washer reservoir.

3. ---/INT: Wiper operates intermittently

The reservoir filler neck is located in the

at the same wiping intervals. Use this

front of the engine compartment on the

mode in light rain or mist. To vary the

driver side.

speed setting, turn the speed control

CAUTION

knob.

4. O/OFF: Wiper is not in operation

To prevent possible damage to the

washer pump, do not operate the

5. ∨ /1X: For a single wiping cycle, move

washer when the fluid reservoir is

the lever to this position and release it.

empty.

The wipers will operate continuously if

the lever is held in this position.

Features of your vehicle

Wipers and washers

僅 When the ignition is in ON, after 20

WARNING

minutes of operation, the system will

Do not use the washer in freezing tem-

turn off automatically to prevent pos-

peratures without first warming the

sible battery discharge.

windscreen with the defrosters; the

僅 After the engine is running, the

washer solution could freeze on the

washer fluid will defrost after 5 to 10

windscreen and obscure your vision.

minutes.

僅 If the engine has been started within

CAUTION

the operating temperature, the

僅 To prevent possible damage to the

heated nozzle remains ON even after

wipers or windscreen, do not operate

20 minutes.

the wipers when the windscreen is

NOTICE

dry.

In below conditions, the heated washer

僅 To prevent damage to the wiper

nozzle may not function properly.

blades, do not use petrol kerosene,

僅 The washer fluids in the washer reser-

paint thinner, or other solvents on or

voir is frozen.

near them.

僅 Outside temperature sensor is mal-

僅 To prevent damage to the wiper arms

functioning.

and other components, do not

attempt to move the wipers manually.

Rear window wiper and washer

僅 To prevent possible damage to the

wipers and washer system, use anti-

switch (if equipped)

freezing washer fluids in the winter

The rear window wiper and washer

season or cold weather.

switch is located at the end of the wiper

and washer switch lever. Turn the switch

Heated washer nozzle (if

to desired position to operate the rear

equipped)

wiper and washer.

The heated washer nozzle function

defreeze the washer nozzles in freezing

weather.

The heated washer nozzle will turn on

and off automatically when the ignition

switch is in ON or when the engine is

OJAPE043033R

running in following conditions:

6. Rear window washer

僅 Turns ON when the outside tempera-

7. Intermittent wipe

ture is below 5°C, and OFF when it is

8. Wiper is not in operation

over 10°C.

Turn the wiper lever switch upwards

僅 The washer fluid defreezing speed

twice to spray rear washer fluid and to

may be slower when the ignition is in

run the rear wipers 1~3 cycles.

ON, than compared to when the

engine is running.

The spray and wiper operation will con-

tinue until you release the lever.

Features of your vehicle

Interior light

僅

(2):

CAUTION

- The map lamp and room lamp

comes on when a door is opened.

Do not use the interior lights for

The lamps go out after approxi-

extended periods when engine is not

mately 30 seconds.

running.

- The map lamp and room lamp

It may cause battery discharge.

comes on for approximately 30

seconds when doors are unlocked

WARNING

with a transmitter or smart key as

long as the doors are not opened.

Do not use the interior lights when driv-

ing in the dark. Accidents could happen

- The map lamp and room lamp will

because the view may be obscured by

stay on for approximately 20 min-

interior lights.

utes if a door is opened with the

ignition switch in the ACC or LOCK/

OFF position.

Automatic turn off function

- The map lamp and room lamp will

The interior lights automatically turn off

stay on continuously if the door is

approximately 20 minutes after the igni-

opened with the ignition switch in

tion switch is turned your vehicle is

the ON position.

equipped with the theft alarm system,

- The map lamp and room lamp will

the interior lights automatically turns off

go out immediately if the ignition

approximately 5 seconds after the sys-

switch is changed to the ON posi-

tem is armed stage.

tion or all doors are locked.

Map lamp/Room lamp (if

- To turn off the DOOR mode, press

equipped)

the DOOR button (2) once again

(not pressed).

Map lamp

僅

(3): Press this switch to turn the

front map lamps on.

僅

(4): Press this switch to turn the

front map lamps off.

NOTICE

The DOOR mode and ROOM mode can

OJAPE033042

Room lamp

not be selected at a time.

OJAPE033043

僅 (1): Press the lamps to turn the front

map lamps on and off.

Features of your vehicle

Defroster

Luggage room lamp

Defroster

CAUTION

To prevent damage to the conductors

bonded to the inside surface of the rear

window, never use sharp instruments or

window cleaners containing abrasives to

clean the window.

OJAPE033044

The luggage room lamp comes on when

the tailgate is opened.

NOTICE

CAUTION

If you want to defrost and defog the

front windscreen, refer to "Windscreen

The luggage room lamp comes on as

defrosting and defogging" on page 4-94.

long as the tailgate opens. To prevent

unnecessary charging system drain,

Rear window defroster

close the tailgate securely after using the

luggage room.

Vanity mirror lamp (if equipped)

OJAPE033301R

The defroster heats the window to

remove frost, fog and thin ice from the

rear window, whilst the engine is run-

OJAPE033045R

ning.

Opening the lid of the vanity mirror will

To activate the rear window defroster,

automatically turn on the mirror light.

press the rear window defroster button.

CAUTION

The indicator on the rear window

Vanity mirror lamp (if equipped)

defroster button illuminates when the

defroster is ON.

Close the vanity mirror cover securely

If there is heavy accumulation of snow

and return the sunvisor to its original

on the rear window, brush it off before

position after use. If the vanity mirror is

not closed securely, the lamp will stay on

operating the rear defroster.

and could result in battery discharge

The rear window defroster automatically

and possible sunvisor damage.

turns off after approximately 20 minutes

or when the ignition switch is turned off.

To turn off the defroster, press the rear

window defroster button again.

Features of your vehicle

Defroster

Outside rear view mirror

defroster (if equipped)

If your vehicle is equipped with the out-

side rearview mirror defrosters, they will

operate at the same time you turn on

the rear window defroster.

Features of your vehicle

Manual climate control system

Manual climate control system (if equipped)

OJAPE033300R

1. Fan speed control knob

2. Mode selection knob

3. Temperature control knob

4. Air conditioning button (if equipped)

5. Rear window defroster button

6. Air intake control button

CAUTION

Operating the blower when the ignition switch is in the ON position could cause the

battery to discharge. Operate the blower when the engine is running.

Features of your vehicle

Manual climate control system

Heating and air conditioning

OJAPE033303R

1. Start the engine.

2. Set the mode to the desired position.

For improving the effectiveness of heating and cooling;

僅 Heating:

僅 Cooling:

3. Set the temperature control to the desired position.

4. Set the air intake control to the outside (fresh) air position.

5. Set the fan speed control to the desired speed.

6. If air conditioning is desired, turn the air conditioning (if equipped) system on.

$Features of your vehicleManual climate control systemMode selectionMost of the air flow is directed to thewindscreen with a small amount of airdirected to the side window panel ventsOJAPE033302The mode selection knob controls thedirection of the air flow through the ven-tilation can be directed to the floor, dash-board outlets, or windscreen. Five sym-bols are used to represent Face, Bi-Level, Floor, Floor-Defrost and Defrostair 033304RFace-Level (B, D)The outlet vents can be opened orAir flow is directed toward the upperclosed separately using the thumbbody and face. Additionally, each outletwheel. To close the vent, rotate it down-can be controlled to direct the air dis-ward to the maximum from the , you can adjust the direction of airdelivery from these vents using the ventBi-Level (B, C, D)control lever as flow is directed towards the face andTemperature controlthe -Level (A, C, D)Most of the air flow is directed to thefloor, with a small amount of the airbeing directed to the windscreen andOJAPE033305side window temperature control knob allowsFloor/Defrost-Level (A, C, D)you to control the temperature of the airflowing from the ventilation of the air flow is directed to thechange the air temperature in the pas-floor and the windscreen with a smallsenger compartment, turn the knob toamount directed to the side windowthe right position for warm and hot air position for cooler -Level (A, D)482$

Features of your vehicle

Manual climate control system

Mode selection

Most of the air flow is directed to the

windscreen with a small amount of air

directed to the side window defrosters.

Instrument panel vents

OJAPE033302

The mode selection knob controls the

direction of the air flow through the ven-

tilation system.

Air can be directed to the floor, dash-

board outlets, or windscreen. Five sym-

bols are used to represent Face, Bi-

Level, Floor, Floor-Defrost and Defrost

air position.

OJAPE033304R

Face-Level (B, D)

The outlet vents can be opened or

Air flow is directed toward the upper

closed separately using the thumb

body and face. Additionally, each outlet

wheel. To close the vent, rotate it down-

can be controlled to direct the air dis-

ward to the maximum position.

charged from the outlet.

Also, you can adjust the direction of air

delivery from these vents using the vent

Bi-Level (B, C, D)

control lever as shown.

Air flow is directed towards the face and

Temperature control

the floor.

Floor-Level (A, C, D)

Most of the air flow is directed to the

floor, with a small amount of the air

being directed to the windscreen and

OJAPE033305

side window defrosters.

The temperature control knob allows

Floor/Defrost-Level (A, C, D)

you to control the temperature of the air

flowing from the ventilation

Most of the air flow is directed to the

change the air temperature in the pas-

floor and the windscreen with a small

senger compartment, turn the knob to

amount directed to the side window

the right position for warm and hot air or

defrosters.

left position for cooler air.

Defrost-Level (A, D)

Features of your vehicle

Manual climate control system

Air intake control

WARNING

僅 Continue using the climate control

system in the recirculated air position

may allow humidity to increase inside

the vehicle which may fog the glass

and obscure visibility.

僅 Do not sleep in a vehicle with the air

OJAPE033306

conditioning or heating system on. It

The air intake control is used to select

may cause serious harm or death due

the outside (fresh) air position or recircu-

to a drop in the oxygen level and/or

lated air position.

body temperature.

To change the air intake control position,

僅 Continue using the climate control

press the control button.

system in the recirculated air position

can cause drowsiness or sleepiness,

Recirculated air position

and loss of vehicle control. Set the air

intake control to the outside (fresh) air

With the recirculated air posi-

position as much as possible whilst

tion selected, air from the pas-

driving.

senger compartment will be

drawn through the heating system and

heated or cooled according to the func-

Fan speed control

tion selected.

Outside (fresh) air position

With the outside (fresh) air posi-

tion selected, air enters the

vehicle from outside and is

OJAPE033307

heated or cooled according to the func-

The ignition switch must be in the ON

tion selected.

position for fan operation.

NOTICE

The fan speed control knob allows you

Prolonged operation of the heater in the

to control the fan speed of the air flow-

recirculated air position (without air con-

ing from the ventilation system. To

ditioning selected) may cause fogging of

change the fan speed, turn the knob to

the windscreen and side windows and

the right for higher speed or left for

the air within the passenger compart-

lower speed.

ment may become stale.

Setting the fan speed control knob to the

In addition, prolonged use of the air con-

“0” position turns off the fan.

ditioning with the recirculated air posi-

To turn off the blowers, turn the fan

tion selected will result in excessively dry

speed control knob to the “0” position.

air in the passenger compartment.

Features of your vehicle

Manual climate control system

Air conditioning (A/C)

air position. Be sure to return the con-

trol to the fresh air position when the

irritation has passed to keep fresh air

in the vehicle. This will help keep the

driver alert and comfortable.

僅 Air for the heating/cooling system is

drawn in through the grilles just

ahead of the windscreen. Care should

OJAPE033308R

be taken that these are not blocked

Press the A/C button to turn the air con-

by leaves, snow, ice or other obstruc-

ditioning system on (indicator light will

tions.

illuminate). Press the button again to

turn the air conditioning system off.

僅 To prevent interior fog on the

windscreen, set the air intake control

System operation

to the fresh air position and fan speed

Ventilation

to the desired position, turn on the air

conditioning system, and adjust the

1. Set the mode to the

position.

temperature control to desired tem-

2. Set the air intake control to the out-

perature.

side (fresh) air position.

Air conditioning

3. Set the temperature control to the

Kia Air Conditioning Systems are filled

desired position.

with environmentally friendly refriger-

4. Set the fan speed control to the

ant*.

desired speed.

1. Start the engine. Push the air condi-

Heating

tioning button.

1. Set the mode to the

position.

2. Set the mode to the

position.

2. Set the air intake control to the out-

3. Set the air intake control to the out-

side (fresh) air position.

side air or recirculated air position.

3. Set the temperature control to the

4. Adjust the fan speed control and tem-

desired position.

perature control to maintain maxi-

4. Set the fan speed control to the

mum comfort.

desired speed.

* : Your vehicle is filled with R-134a or R-

5. If dehumidified heating is desired,

1234yf according to the regulation in

turn the air conditioning system (if

your country at the time of producing.

equipped) on.

You can find out which air condition-

僅 If the windscreen fogs up, set the

ing refrigerant is applied your vehicle

mode to the

position.

at the label inside of engine room (if

equipped). Refer to "Refrigerant label

Operation Tips

(if equipped)" on page 9-14. for more

detail location of air conditioning

僅 To keep dust or unpleasant fumes

refrigerant label.

from entering the vehicle through the

ventilation system, temporarily set the

air intake control to the recirculated

Features of your vehicle

Manual climate control system

僅 To help reduce moisture inside of the

CAUTION

windows on rainy or humid days,

僅 The refrigerant system should only be

decrease the humidity inside the vehi-

serviced by trained and certified tech-

cle by operating the air conditioning

nicians to insure proper and safe

system.

operation.

僅 During air conditioning system opera-

僅 The refrigerant system should be ser-

tion, you may occasionally notice a

viced in a well-ventilated place.

slight change in engin speed as the air

僅 The air conditioning evaporator (cool-

conditioning compressor cycles. This

ing coil) shall never be repaired or

is a normal system operation charac-

replaced with one removed from a

teristic.

used or salvage vehicle and new

僅 Use the air conditioning system every

replacement MAC evaporators shall

month only for a few minutes to

be certified (and labeled) as meeting

ensure maximum system perfor-

SAE Standard J2842.

mance.

僅 When using the air conditioning sys-

NOTICE

tem, you may notice clear water drip-

ping (or even puddling) on the ground

僅 When using the air conditioning sys-

under the passenger side of the vehi-

tem, monitor the temperature gauge

cle. This is a normal system operation

closely whilst driving up hills or in

characteristic.

heavy traffic when outside tempera-

tures are high. Air conditioning system

僅 Operating the air conditioning system

operation may cause engine over-

in the recirculated air position pro-

heating. Continue to use the blower

vides maximum cooling, however,

fan but turn the air conditioning sys-

continual operation in this mode may

tem off if the temperature gauge indi-

cause the air inside the vehicle to

cates engine overheating.

become stale.

僅 When opening the windows in humid

僅 During cooling operation, you may

weather air conditioning may create

occasionally notice a misty air flow

water droplets inside the vehicle.

because of rapid cooling and humid

Since excessive water droplets may

air intake. This is a normal system

cause damage to electrical equip-

operation characteristic.

ment, air conditioning should only be

used with the windows closed.

Air conditioning system opera-

tion tips

僅 If the vehicle has been parked in

direct sunlight during hot weather,

open the windows for a short time to

let the hot air inside the vehicle

escape.

Features of your vehicle

Automatic climate control system

Automatic climate control system (if equipped)

OJAPE033310

1. Temperature control knob

2. AUTO (automatic control) button

3. Climate control display

4. Fan speed control knob

5. OFF button

6. Front windscreen defroster button

7. Rear window defroster button

8. Mode selection button

9. Air conditioning button (if equipped)

10.Air intake control button

CAUTION

Operating the blower when the ignition switch is in the ON position could cause the

battery to discharge. Operate the blower when the engine is running.

Features of your vehicle

Automatic climate control system

Automatic heating and air condi-

trol, use the AUTO button and set the

tioning

temperature to 23°C (73°F).

1. Push the AUTO button. The modes,

NOTICE

fan speeds, air intake and air-condi-

tioning will be controlled automati-

Never place anything over the sensor

cally according to the temperature

located on the instrument panel to

setting.

ensure better control of the heating and

cooling system.

OJAPE033311

2. Set the temperature control knob to

OJAPE033047

set the desired temperature.

Manual heating and air condition-

ing

The heating and cooling system can be

controlled manually by pushing buttons

other than the AUTO button. In this case,

the system works sequentially according

OJAPE033315

to the order of buttons selected.

NOTICE

When pressing any button (or turning

僅 To turn the automatic operation off,

any knob) except the AUTO button

select any button or switch of the fol-

whilst using automatic operation, the

lowing:

functions not selected will be controlled

- Mode selection button

automatically.

- Air conditioning button

1. Start the engine.

- Front windscreen defroster button

2. Set the mode to the desired position.

(Press the button one more time to

To improve the effectiveness ofheat-

deselect the front windscreen

ing and cooling:

defroster function. The AUTO sign

僅 Heating:

will illuminate on the information

僅 Cooling:

display once again.)

3. Set the temperature control to the

- Air intake control button

desired position.

- Fan speed control knob

4. Set the air intake control to the out-

The selected function will be con-

side (fresh) air position.

trolled manually whilst other functions

5. Set the fan speed control to the

operate automatically.

desired speed.

僅 For your convenience and to improve

the effectiveness of the climate con-

Features of your vehicle

Automatic climate control system

6. If air conditioning is desired, turn the

Most of the air flow is directed to the

air conditioning system on.

floor, with a small amount of the air

being directed to the windscreen and

Press the AUTO button in order to con-

side window defrosters.

vert to full automatic control of the sys-

tem.

Defrost mode

Mode selection

The mode selection button controls the

direction of the air flow through the ven-

tilation system.

OJAPE033314

When you select the defrost mode, the

following system settings will be made

automatically:

OJAPE033312

僅 The air conditioning system will be

The air flow outlet port is converted as

turned on.

follows:

僅 The outside (fresh) air position will be

selected.

Refer to the illustration in the "Manual

僅 The fan speed will be set to the high

climate control system (if equipped)" on

speed.

page 4-80.

To turn the defrost mode off, press the

mode button or defrost button again or

Floor & Defrost (A, C, D)

AUTO button.

Most of the air flow is directed to the

Instrument panel vents

floor and the windscreen with a small

amount directed to the side window

defrosters.

Face-Level (B, D)

Air flow is directed toward the upper

body and face. Additionally, each outlet

can be controlled to direct the air dis-

charged from the outlet.

Bi-Level (B, C, D)

Air flow is directed towards the face and

OJAPE033304

the floor.

The outlet port can be opened or closed

separately using the horizontal thumb-

Floor-Level (A, C, D)

wheel. To close the vent, rotate it down-

Features of your vehicle

Automatic climate control system

Air intake control

ward to the maximum position. To open

the vent, rotate it upward to the desired

position.

Also, you can adjust the direction of air

delivered from these vents using the

vent control lever as shown.

Temperature control

OJAPE033316

This is used to select the outside (fresh)

air position or recirculated air position.

To change the air intake control position,

press the control button.

Recirculated air position

OJAPE033315

The temperature will increase to the

With the recirculated air posi-

maximum (HI) by turning the knob to

tion selected, air from the pas-

the right extremely.

senger compartment will be

The temperature will decrease to the

drawn through the heating system and

minimum (Lo) by turning the knob to the

heated or cooled according to the func-

left extremely.

tion selected.

When turning the knob, the temperature

will increase or decrease by 0.5°C/1°F.

Outside (fresh) air position

When set to the lowest temperature set-

With the outside (fresh) air posi-

ting, the air conditioning will operate

tion selected, air enters the

continuously.

vehicle from outside and is

heated or cooled according to the func-

Temperature conversion

tion selected.

You can switch the temperature mode

NOTICE

between Centigrade to Fahrenheit as

Prolonged operation of the heater in the

follows:

recirculated air position (without air con-

Whilst pressing the OFF button, press

ditioning selected) may cause fogging of

the AUTO button for 4 seconds or more.

the windscreen and side windows and

The display will change from Centigrade

the air within the passenger compart-

to Fahrenheit, or from Fahrenheit to

ment may become stale.

Centigrade.

In addition, prolonged use of the air con-

If the battery has been discharged or

ditioning with the recirculated air posi-

disconnected, the temperature mode

tion selected will result in excessively dry

display will reset to Centigrade.

air in the passenger compartment.

Features of your vehicle

Automatic climate control system

Air conditioning (A/C) (if

WARNING

equipped)

僅 Continued climate control system

operation in the recirculated air posi-

tion may allow humidity to increase

inside the vehicle which may fog the

glass and obscure visibility.

僅 Do not sleep in a vehicle with the air

conditioning or heating system on. It

OJAPE033317

may cause serious harm or death due

Press the A/C button to turn the air con-

to a drop in the oxygen level and/or

ditioning system on (indicator light will

body temperature.

illuminate).

僅 Continued climate control system

Press the button again to turn the air

operation in the recirculated air posi-

conditioning system off.

tion can cause drowsiness or sleepi-

ness, and loss of vehicle control. Set

OFF mode

the air intake control to the outside

(fresh) air position as much as possi-

ble whilst driving.

Fan speed control

OJAPE033319

Press the OFF button to turn off the air

climate control system. However, you

can still operate the air intake buttons as

long as the ignition switch is in the ON

position.

OJAPE033318

The fan speed can be set to the desired

System operation

speed by operating the fan speed con-

Ventilation

trol knob.

The higher the fan speed is, the more air

1. Set the mode to the

position.

is delivered.

2. Set the air intake control to the out-

Pressing the OFF button turns off the

side (fresh) air position.

fan.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

Heating

1. Set the mode to the

position.

2. Set the air intake control to the out-

side (fresh) air position.

Features of your vehicle

Automatic climate control system

3. Set the temperature control to the

4. Adjust the fan speed control and tem-

desired position.

perature control to maintain maxi-

mum comfort.

4. Set the fan speed control to the

desired speed.

* : Your vehicle is filled with R-134a or R-

1234yf according to the regulation in

5. If dehumidified heating is desired,

your country at the time of producing.

turn the air conditioning system (if

You can find out which air condition-

equipped) on.

ing refrigerant is applied your vehicle

僅 If the windscreen fogs up, set the

at the label inside of engine room (if

mode to the

position.

equipped). Refer to "Refrigerant label

Operation Tips

(if equipped)" on page 9-14 for more

detail location of air conditioning

僅 To keep dust or unpleasant fumes

refrigerant label.

from entering the vehicle through the

ventilation system, temporarily set the

CAUTION

air intake control to the recirculated

僅 The refrigerant system should only be

air position. Be sure to return the con-

serviced by trained and certified tech-

trol to the fresh air position when the

nicians to insure proper and safe

irritation has passed to keep fresh air

operation.

in the vehicle. This will help keep the

僅 The refrigerant system should be ser-

driver alert and comfortable.

viced in a well-ventilated place.

僅 Air for the heating/cooling system is

僅 The air conditioning evaporator (cool-

drawn in through the grilles just

ing coil) shall never be repaired or

ahead of the windscreen. Care should

replaced with one removed from a

be taken that these are not blocked

used or salvaged vehicle and new

by leaves, snow, ice or other obstruc-

replacement MAC evaporators shall

tions.

be certified (and labeled) as meeting

僅 To prevent interior fog on the

SAE Standard J2842.

windscreen, set the air intake control

to the fresh air position and fan speed

to the desired position, turn on the air

NOTICE

conditioning system, and adjust the

僅 When using the air conditioning sys-

temperature control to desired tem-

tem, monitor the temperature gauge

perature.

closely whilst driving up hills or in

Air conditioning

heavy traffic when outside tempera-

tures are high. Air conditioning system

Kia Air Conditioning Systems are filled

operation may cause engine over-

with environmentally friendly refriger-

heating. Continue to use the blower

ant*.

fan but turn the air conditioning sys-

1. Start the engine. Push the air condi-

tem off if the temperature gauge indi-

tioning button.

cates engine overheating.

2. Set the mode to the

position.

僅 When opening the windows in humid

3. Set the air intake control to the out-

weather air conditioning may create

side air or recirculated air position.

water droplets inside the vehicle.

Features of your vehicle

Automatic climate control system

Since excessive water droplets may

air intake. This is a normal system

cause damage to electrical equip-

operation characteristic.

ment, air conditioning should only be

Climate control air filter (if

used with the windows closed.

equipped)

Air conditioning system opera-

tion tips

僅 If the vehicle has been parked in

direct sunlight during hot weather,

open the windows for a short time to

ONQ5EP041426L

let the hot air inside the vehicle

A: Outside air

escape.

B: Recirculated air

僅 To help reduce moisture inside of the

C: Climate control air filter

windows on rainy or humid days,

D: Blower

decrease the humidity inside the vehi-

cle by operating the air conditioning

E: Evaporator core

system.

F: Heater core

僅 During air conditioning system opera-

The climate control air filter installed

tion, you may occasionally notice a

behind the glove box filters the dust or

slight change in engine speed as the

other pollutants that come into the vehi-

air conditioning compressor cycles.

cle from the outside through the heating

This is a normal system operation

and air conditioning system.

characteristic.

If dust or other pollutants accumulate in

僅 Use the air conditioning system every

the filter over a period of time, the air

month only for a few minutes to

flow from the air vents may decrease,

ensure maximum system perfor-

resulting in moisture accumulation on

mance.

the inside of the windscreen even when

僅 When using the air conditioning sys-

the outside (fresh) air position is

tem, you may notice clear water drip-

selected. If this happens, have the cli-

mate control air filter replaced by a pro-

ping (or even puddling) on the ground

under the passenger side of the vehi-

fessional workshop. Kia recommends to

cle. This is a normal system operation

visit an authorised Kia dealer/service

partner.

characteristic.

僅 Operating the air conditioning system

NOTICE

in the recirculated air position pro-

僅 Replace the filter according to the

vides maximum cooling, however,

Maintenance Schedule.

continual operation in this mode may

If the vehicle is being driven in severe

cause the air inside the vehicle to

conditions such as dusty or rough

become stale.

roads, more frequent air conditioner

僅 During cooling operation, you may

filter inspections and changes are

occasionally notice a misty air flow

required.

because of rapid cooling and humid

Features of your vehicle

Automatic climate control system

僅 When the air flow rate suddenly

decreases, have the system checked

by a professional workshop. Kia rec-

ommends to visit an authorised Kia

dealer/service partner.

Air Conditioning refrigerant label

OJAPE033046

If the refrigerant label is equipped, it is

(if equipped)

located on the underside of the bonnet.

Example

Checking the amount of air con-

R-134a

ditioner refrigerant and compres-

sor lubricant

When the amount of refrigerant is low,

the performance of the air conditioning

is reduced. Overfilling also has a bad

influence on the air conditioning system.

Therefore, if abnormal operation is

ONQ5041297L

found, have the system inspected by a

R-1234yf

professional workshop.

Kia recommends to visit an authorised

Kia dealer/service partner.

WARNING

Vehicles equipped with R-134a

ONQ5H031014

Because the refrigerant is at

* The actual Air Conditioning refrigerant

very high pressure, the air con-

label in the vehicle may differ from the

ditioning system should only be

illustration.

serviced by trained and certified techni-

cians. It is important that the correct

Each symbols and specification on air

type and amount of oil and refrigerant is

conditioning refrigerant label means as

used. Otherwise, it may cause damage

below;

to the vehicle and personal injury.

1. Classification of refrigerant

2. Amount of refrigerant

WARNING

3. Classification of Compressor lubricant

Vehicles equipped with R-1234yf

4. Caution

5. Flammable Refrigerant

Since the refrigerant is mildly

6. To requires Registered Technician to

flammable and operated at high pres-

service Air Conditioning system

sure, the air conditioning system should

7. Service manual

only be serviced by trained and certified

technicians.

Features of your vehicle

Windscreen defrosting and defogging

Windscreen defrosting and

It is important that the correct type and

amount of oil and refrigerant are used.

defogging

All refrigerants should be reclaimed with

Manual climate control system

proper equipment.

To defog inside windscreen

Venting refrigerants directly to the

atmosphere is harmful to individuals and

1. Select any fan speed except “0” posi-

environment.

tion.

Failure to heed these warnings can lead

2. Select desired temperature.

to serious injuries.

3. Select the

position.

4. The outside (fresh) air and air condi-

Sunroof inside air recirculation (if

tioning will be selected automatically.

equipped)

The outside (fresh) air position is auto-

matically selected, when the sunroof is

opened.

When you select the recirculated air

position, the system maintains the recir-

culated air position for 3 minutes and

then automatically converts to the out-

side (fresh) air position.

When the sunroof is closed, the air

intake position will return to the original

position that was selected.

OJAPE033320

If the air conditioning and outside (fresh)

air position are not selected automati-

cally, press the corresponding button

manually.

To defrost outside windscreen

1. Set the fan speed to the highest

(extreme right) position.

2. Set the temperature to the extreme

hot position.

3. Select the

position.

4. The outside (fresh) air and air condi-

tioning will be selected automatically.

Features of your vehicle

Windscreen defrosting and defogging

To defrost outside windscreen

1. Set the fan speed to the highest

(extreme right) position.

2. Set the temperature to the extreme

hot (HI) position.

3. Press the defrost button (

4. The air conditioning will be turned on

according to the detected ambient

temperature and outside (fresh) air

position will be selected automatically.

OJAPE033321

Automatic climate control system

To defog inside windscreen

1. Set the fan speed to the desired posi-

tion.

2. Select desired temperature.

3. Press the defrost button (

4. The air conditioning will be turned on

according to the detected ambient

temperature and outside (fresh) air

OJAPE033323

position will be selected automatically.

If the

position is selected, lowerfan

speed is adjusted to a higher fanspeed.

Defogging logic (if equipped)

To reduce the possibility of fogging up

the inside of the windscreen, the air

intake or air conditioning are controlled

automatically according to certain con-

ditions such as

position. To

cancel or return to the defogging logic,

do the following.

Automatic climate control sys-

OJAPE033322

tem (if equipped)

If the air conditioning and outside (fresh)

1. Turn the ignition switch to the ON

air position are not selected automati-

position.

cally, adjust the corresponding button

2. Select the defrost position pressing

manually. If the

position is selected,

defrost button (

lower fan speed is adjusted to a higher

fan speed.

3. Whilst holding the air conditioning

button (A/C) pressed, press the air

Features of your vehicle

Storage compartments

intake control button at least 5 times

within 3 seconds.

These compartments can be used to

store small items required by the driver

or passengers.

CAUTION

僅 To avoid possible theft, do not leave

valuables in the storage compart-

ments.

僅 Always keep the storage compart-

ment covers closed whilst driving. Do

not attempt to place so many items in

the storage compartment that the

storage compartment cover cannot

OJAPE033324

The air intake control button indicator

close securely.

blinks 3 times. It indicates that the

defogging logic is cancelled or returned

WARNING

to the programmed status.

Flammable materials

If the battery has been discharged or

Do not store cigarette lighters, propane

disconnected, it is reset to the defog

cylinders, or other flammable/explosive

logic status.

materials in the vehicle. These items

may catch fire and/or explode if the

vehicle is exposed to hot temperatures

for extended periods.

Centre console storage (if

equipped)

Type A

OJAPE033048R

Features of your vehicle

Storage compartments

Luggage net holder (if equipped)

Type B

OJAPE033049R

OJAPE033058

These compartments can be used to

To keep items from shifting in the cargo

store small items required by the driver

area, you can use the 2 holders located

or front passenger.

in the cargo area to attach the luggage

To open the centre console storage pull

net.

up the lever.

If necessary, Kia recommends to contact

an authorised Kia dealer/service partner.

Glove box

CAUTION

To prevent damage to the goods or the

vehicle, care should be taken when car-

rying fragile or bulky objects in the lug-

gage compartment.

OJAPE033050R

WARNING

To open the glove box, pull the handle

and the glove box will automatically

Avoid eye injury. DO NOT overstretch

open. Close the glove box after use.

the luggage net, ALWAYS keep your

face and body out of the luggage net’s

WARNING

recoil path. DO NOT use when the strap

To reduce the risk of injury in an acci-

has visible signs of wear or damage.

dent or sudden stop, always keep the

glove box door closed whilst driving.

CAUTION

Do not keep food in the glove box for a

long time.

Features of your vehicle

Storage compartments

Cargo area cover (if equipped)

Luggage board (if equipped)

Use the cargo area cover to hide items

You can place a first aid kit, a reflector

stored in the cargo area.

triangle, tools, etc. in the box for easy

access.

Removal and installation

To remove the cargo area cover:

1. Remove straps (1) from both sides of

the cargo area cover.

OJAPE033061

Grasp the handle on the top of the cover

and lift it.

Increase cargo space (if

equipped)

If you want to increase cargo space,

1. Grasp the handle on the top of the

cover and lift it.

OJAPE033060_2

2. Whilst lifting the cover up, hold the

area near the front slots. Then, pull up

the cover (2) at approximately 50 ˚

angle.

WARNING

OJAPE033061

2. Fold(1) the rear part of the luggage

Do not place objects on the cargo area

board frontward(2).

cover. Such objects may be thrown

about inside the vehicle and possibly

injure vehicle occupants during an acci-

dent or when braking.

CAUTION

Since the cargo area cover may be dam-

OJAPE033062

aged or malformed, do not put luggage

on it when it is used.

Features of your vehicle

Interior features

3. Pull the luggage board hinge(3) to the

end of sliding slot and it will fall down

Ashtray (if equipped)

lower to increase cargo space.

OJAPE043049R

To use the ashtray, open the cover.

To clean or empty the ashtray, pull it out.

Use the ashtray by leaning it to the cup

holder right beside.

OJAPE033063

WARNING

4. Slide it frontward(4).

Ashtray use

僅 Do not use the vehicle’s ashtrays as

waste receptacles.

僅 Putting lit cigarettes or matches in an

ashtray with other combustible mate-

rials may cause a fire.

Cup holder

WARNING

Hot liquids

僅 Do not place uncovered cups of hot

liquid in the cup holder whilst the

vehicle is in motion. If the hot liquid

spills, you could be burned. Such a

burn to the driver could lead to loss of

control of the vehicle.

僅 To reduce the risk of personal injury in

the event of sudden stop or collision,

do not place uncovered or unsecured

bottles, glasses, cans, etc., in the cup

holder whilst the vehicle is in motion.

Features of your vehicle

Interior features

ture. This may damage the cup

WARNING

holder.

Keep cans or bottles out of direct sun

light and do not put them in a vehicle

Sunvisor

that is heated up. It may explode.

Use the sunvisor to shield direct light

through the front or side windows.

OJAPE033051

Cups or small beverage cans may be

OJAPE033053R

placed in the cup holders.

To use the sunvisor, pull it downward.

To use the cup holder, press the button

To use the sunvisor for the side window,

(1).

pull it downward, unsnap it from the

bracket (1) and swing it to the side (2).

The half part of the cup holder (2) will

appear.

To use the vanity mirror, pull down the

visor and slide the mirror cover (3).

CAUTION

The ticket holder (4) is provided for

Be careful not to spill drinks in the cup

holding a tollgate ticket. (if equipped)

holder. The cup holder may not work.

WARNING

For your safety, do not obstruct your

vision when using the sunvisor.

Seat warmer (if equipped)

Front seat

OJAPE033052

To use the cup holder space as a storage

compartment, turn the half part of the

cup holder (2) to the direction of the

arrow.

NOTICE

OJAPE033055R

僅 Keep your drinks sealed whilst driving

The seat warmer is provided to warm

to prevent spilling your drink. If liquid

the front seats during cold weather. With

spills, it may get into the vehicle's

the ignition switch in the ON position,

electrical/electronic system and dam-

push either of the switches to warm the

age electrical/electronic parts.

driver's seat or the front passenger's

僅 When cleaning spilled liquids, do not

seat.

dry the cup holder at high tempera-

100

Features of your vehicle

Interior features

During mild weather or under conditions

WARNING

where the operation of the seat warmer

Seat warmer burns

is not needed, keep the switches in the

Passengers should use extreme caution

“OFF” position.

when using seat warmers due to the

僅 Each time you press the switch, the

possibility of excess heating or burns.

temperature setting of the seat will

The seat warmer may cause burns even

change as follows :

at low temperatures, especially if used

for long periods of time. In particular, the

Front seat

driver must exercise extreme care for

the following types of passengers:

1. Infants, children, elderly or handi-

capped persons, or hospital outpa-

tients

僅 The seat warmer defaults to the OFF

2. Persons with sensitive skin or those

position whenever the ignition switch

that burn easily

is turned on.

3. Fatigued individuals

NOTICE

4. Intoxicated individuals

5. Individuals taking medication that can

With the seat warmer switch in the ON

cause drowsiness or sleepiness

position, the heating system in the seat

(sleeping pills, cold tablets, etc.)

turns off or on automatically depending

on the seat temperature.

Air ventilation seat (if equipped)

CAUTION

Driver’s seat

僅 When cleaning the seats, do not use

an organic solvent such as paint thin-

ner, benzene, alcohol and petrol.

Doing so may damage the surface of

the heater or seats.

僅 To prevent overheating the seat

warmer, do not place anything on the

OJAPE033056R

seats that insulates against heat, such

The temperature setting of the seat

as blankets, cushions or seat covers

changes according to the switch posi-

whilst the seat warmer is in operation.

tion.

僅 Do not place heavy or sharp objects

僅 If you want to warm your seat cush-

on seats equipped with seat warmers.

ion, press the switch (red colour).

Damage to the seat warming compo-

僅 If you want to cool your seat cushion,

nents could occur.

press the switch (blue colour).

僅 Do not change the seat cover. It may

僅 Each time you press the button, the

damage the seat warmer or airventila-

airflow will change as follows:

tion system.

101

Features of your vehicle

Interior features

僅 Close the cover when not in use.

僅 Some electronic devices can cause

electronic interference when plugged

into a vehicle’s power outlet. These

僅 The seat warmer (with air ventilation)

devices may cause excessive audio

defaults to the OFF position whenever

static and malfunctions in other elec-

the ignition switch is turned on.

tronic systems or devices used in your

vehicle.

CAUTION

僅 Using electrical products which

When cleaning the seats, do not use an

exceed the limited capacity might

organic solvent such as paint thinner,

cause heating to the power outlet and

benzene, alcohol and petrol. Doing so

wiring that could lead to an electrical

may damage the surface of the heater

breakdown.

or seats.

僅 Always make sure the electrical part is

firmly plugged into the power outlet.

Power outlet

Incomplete plugging may cause elec-

trical breakdown.

僅 Electrical products with a built-in bat-

tery might cause current flow, which

could lead to malfunction of the elec-

tric/electronic device in your vehicle.

Only use electrical products which

OJAPE033054R

include reverse current prevention.

The power outlet is designed to provide

power for mobile telephones or other

WARNING

devices designed to operate with vehicle

Do not put a finger or a foreign element

electrical systems. The devices should

(pin, etc.) into a power outlet and do not

draw less than 10 amps with the engine

touch with a wet hand. You may get an

running.

electric shock.

CAUTION

僅 Use the power outlet only when the

engine is running and remove the

accessory plug after use. Using the

accessory plug for prolonged periods

of time with the engine off could

cause the battery to discharge.

僅 Only use 12V electric accessories

which are less than 10A in electric

capacity.

僅 Adjust the air-conditioner or heater to

the lowest operating level when using

the power outlet.

102

Features of your vehicle

Interior features

USB charger

僅 Use the official USB cable of the man-

ufacturer of the digital device to be

Front

charged.

僅 Make sure that any foreign object,

drinks, and water do not come into

contact with the USB car charger.

Water or foreign object can damage

the USB charger.

僅 Do not use the device those current

OJAPE033097R

consumption exceeds 2.1 A.

Centre (if equipped)

僅 Do not connect an electrical device

that generates excessive electromag-

netic noise to the USB car port. If you

do so, noise can be caused or vehicle

electronic devices can be interrupted

whilst audio or AV is on.

僅 If the charger is connected incorrectly,

OJAPE033096

it can cause serious damage to the

The USB charger allows drivers and pas-

devices. Please note that damages

sengers to charge their digital devices

due to incorrect usage are not cov-

such as smartphones and tablets.

ered by warranty service.

INFORMATION

Floor mat anchor(s) (if equipped)

僅 Quick Charge 2.0 is available on the

smartphone or the table PC equipped

with fast charging capabilities. The

applicable is as follows: (

quickcharge-device-list) The smart-

phone or PC tablet without fast

OCV041082N

charging is charged at a regular

When using a floor mat on the front floor

speed.

carpet, make sure it attaches to the floor

僅 Rated output

mat anchor(s) in your vehicle. This keeps

- Digital devices with fast charging:

the floor mat from sliding forward.

9.0 V, 1.67 A

WARNING

- Digital devices with normal

charging: 5.0 V, 2.1 A

The following must be observed when

installing ANY floor mat to the vehicle.

CAUTION

僅 Ensure to remove a protective film

attached on the carpet before attach-

僅 Use the USB car charger with the

ing a floor mat on the front floor car-

vehicle on. Otherwise, Vehicle battery

pet. Otherwise, the floor mat may

can be discharged.

move freely on the protective film and

103

Features of your vehicle

Interior features

Shopping bag holder

it could result in unintentional braking

or accelerating.

僅 Ensure that the floor mats are

securely attached to the vehicle's floor

mat anchor(s) before driving the vehi-

cle.

僅 Do not use ANY floor mat that cannot

be firmly attached to the vehicle's

OJAPE033059

floor mat anchors.

CAUTION

僅 Do not stack floor mats on top of one

僅 Do not hang a bag weighing more

another (e.g. all-weather rubber mat

than 3 kg (7 lbs.). It may cause dam-

on top of a carpeted floor mat). Only a

age to the shopping bag holder.

single floor mat should be installed in

僅 Do not hang the frail objects when

each position.

you drive rough road, the objects may

僅 Use floor mats not too thick and

be damaged.

designed to be properly secured on

the floor to avoid the interference with

Clothes hanger

pedals. Make sure that installing the

To use the hanger, pull down the upper

floor mats without removing plastic

portion of hanger.

films on carpets may damage or

break floor mat fix rings, resulting in

the mats to be unsecured. Especially

for a driver's seat, the unsecured mats

may cause unintended acceleration/

brake.

Ensure to remove all the plastic films

OSG2PH042051N

on the carpets before installing the

CAUTION

mats.

IMPORTANT - Your vehicle was manu-

Do not hang heavy clothes, since those

factured with driver's side floor mat

may damage the hook.

anchors that are designed to securely

hold the floor mat in place. To avoid any

interference with pedal operation, Kia

recommends that only the Kia floor mat

designed for use in your vehicle be

installed.

104

Features of your vehicle

Infotainment System

WARNING

Infotainment System

NOTICE

If you install an aftermarket HID head

lamp, your vehicle’s audio and electronic

device may malfunction.

OSG2PH042045N

Do not hang other objects such as hang-

* If your vehicle is equipped with Info-

tainment system, refer to a separately

ers or hard objects except clothes. Also,

do not put heavy, sharp or breakable

supplied manual for detailed informa-

objects in the clothe pockets. In an acci-

tion.

dent or when the curtain air bag is

Antenna

inflated, it may cause vehicle damage or

Roof antenna

personal injury.

Type A

OJAPE033064L

Type B

OJAPE033403L

Your car uses a roof antenna to receive

both AM and FM broadcast signals. This

antenna is a removable type.

To remove the antenna, turn it counter-

clockwise. To install the antenna, turn it

clockwise.

CAUTION

Roof antenna

僅 Before entering a place with a low

height clearance or a car wash,

remove surely the antenna by rotating

105

Features of your vehicle

Infotainment System

How vehicle audio works

it counterclockwise. If not, the

antenna may be damaged.

僅 When reinstalling your antenna, it is

FM reception

important that it is fully tightened and

adjusted to the upright position to

ensure proper reception. But it could

be folded or removed when parking

the vehicle or when loading cargo on

the roof rack.

Shark fin antenna

OGL3061067L

AM and FM radio signals are broadcast

from transmitter towers located around

OJAPE033065

your city. They are intercepted by the

The shark fin antenna will receive the

radio antenna on your vehicle. This sig-

transmit data.

nal is then received by the radio and

USB port (if equipped)

sent to your vehicle speakers.

When a strong radio signal has reached

your vehicle, the precise engineering of

your infotainment system ensures the

best possible quality reproduction. How-

ever, in some cases the signal coming to

your vehicle may not be strong and

clear.

OJAPE033068R

This can be due to factors, such as the

You can use the USB port to plug in a

distance from the radio station, close-

USB device.

ness of other strong radio stations or the

presence of buildings, bridges or other

large obstructions in the area.

106

Features of your vehicle

Infotainment System

AM reception

ings, mountains, or other obstructions.

These can result in certain listening con-

ditions which might lead you to believe a

problem exists with your radio. The fol-

lowing conditions are normal and do not

indicate radio trouble:

僅 Fading - As your vehicle moves away

from the radio station, the signal will

weaken and sound will begin to fade.

When this occurs, we suggest that you

select another stronger station.

僅 Flutter/Static - Weak FM signals or

large obstructions between the trans-

OGL3061070L

mitter and your radio can disturb the

AM broadcasts can be received at

signal causing static or fluttering

greater distances than FM broadcasts.

noises to occur. Reducing the treble

This is because AM radio waves are

level may lessen this effect until the

transmitted at low frequencies. These

disturbance clears.

long, low frequency radio waves can fol-

low the curvature of the earth rather

than travelling straight out into the

atmosphere. In addition, they curve

around obstructions so that they can

provide better signal coverage.

FM radio station

OGL3061071L

僅 Station Swapping - As a FM signal

weakens, another more powerful sig-

nal near the same frequency may

begin to play. This is because your

radio is designed to lock onto the

clearest signal. If this occurs, select

another station with a stronger signal.

OGL3061069L

僅 Multi-Path Cancellation - Radio sig-

FM broadcasts are transmitted at high

nals being received from several

frequencies and do not bend to follow

directions can cause distortion or flut-

the earth's surface. Because of this, FM

tering. This can be caused by a direct

broadcasts generally begin to fade at

and reflected signal from the same

short distances from the station. Also,

station, or by signals from two sta-

FM signals are easily affected by build-

107

Features of your vehicle

Infotainment System

tions with close frequencies. If this

occurs, select another station until the

iPod씾

condition has passed.

iPod씾 is a trademark of Apple Inc.

Bluetooth씾 Wireless Technology

The Bluetooth씾 word mark and logos

are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such

marks by Kia is nder license. Other

trademarks and trade names are those

of their respective owners.

OGL3061068L

Using a cellular phone or a two-

way radio

When a cellular phone is used inside the

vehicle, noise may be produced from the

audio system. This does not mean that

something is wrong with the audio

equipment. In such a case, use the cellu-

lar phone at a place as far as possible

from the audio equipment.

CAUTION

When using a communication system

such as a cellular phone or a radio set

inside the vehicle, a separate external

antenna must be fitted. When a cellular

phone or a radio set is used with an

internal antenna alone, it may interfere

with the vehicle's electrical system and

adversely affect safe operation of the

vehicle.

WARNING

Do not use a cellular phone whilst driv-

ing. Stop at a safe location to use a cellu-

lar phone.

108

Features of your vehicle for Your Kia Picanto 4 Door Third Generation (2019-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals