Features of your vehicle
Windscreen defrosting and defogging
To defrost outside windscreen
1. Set the fan speed to the highest
(extreme right) position.
2. Set the temperature to the extreme
hot (HI) position.
3. Press the defrost button (
).
4. The air conditioning will be turned on
according to the detected ambient
temperature and outside (fresh) air
position will be selected automatically.
OJAPE033321
Automatic climate control system
To defog inside windscreen
4
1. Set the fan speed to the desired posi-
tion.
2. Select desired temperature.
3. Press the defrost button (
).
4. The air conditioning will be turned on
according to the detected ambient
temperature and outside (fresh) air
OJAPE033323
position will be selected automatically.
If the
position is selected, lowerfan
speed is adjusted to a higher fanspeed.
Defogging logic (if equipped)
To reduce the possibility of fogging up
the inside of the windscreen, the air
intake or air conditioning are controlled
automatically according to certain con-
ditions such as
or
position. To
cancel or return to the defogging logic,
do the following.
Automatic climate control sys-
OJAPE033322
tem (if equipped)
If the air conditioning and outside (fresh)
1. Turn the ignition switch to the ON
air position are not selected automati-
position.
cally, adjust the corresponding button
2. Select the defrost position pressing
manually. If the
position is selected,
defrost button (
).
lower fan speed is adjusted to a higher
fan speed.
3. Whilst holding the air conditioning
button (A/C) pressed, press the air
4
95
English 
