Features of your vehicle
Bonnet
Bonnet
WARNING
Opening the bonnet
Hot parts
Grasp the support rod in the area
1. Pull the release lever to unlatch the
wrapped in yellow cap.
bonnet. The bonnet should pop open
slightly.
The cap will help prevent you from being
burned by hot metal when the engine is
hot.
Bonnet open warning (if
equipped)
OJAPE033012R
WARNING
Open the bonnet after turning off the
4
engine on a flat surface, shifting the shift
lever to the P(Park) position for Auto-
matic Transmission or to the N(Neutral)
position for Automated Manual Trans-
OJAPE033112
The warning message will appear on the
mission or to the 1st(First) gear or
LCD display when bonnet is open.
R(Reverse) for Manual Transmission,
and setting the parking brake.
The warning chime will operate when
the vehicle is being driven above 3 km/h
2. Go to the front of the vehicle, raise the
(2 mph) with the bonnet open.
bonnet slightly, push the secondary
Closing the bonnet
bonnet release lever (1) inside of the
1. Before closing the bonnet, check the
bonnet centre and lift the bonnet (2).
following:
僅 All filler caps in engine compart-
ment must be correctly installed.
僅 Gloves, rags or any other combusti-
ble material must be removed from
the engine compartment.
OJAPE033013
2. Return the support rod to its clip to
3. Pull the support rod from the bonnet.
prevent it from rattling.
4. Hold the bonnet open with the sup-
3. Lower the bonnet until it is about 30
port rod.
cm (12 inches) above the closed posi-
tion and let it drop. Make sure that it
locks into place.
4. Check that the bonnet has engaged
properly. If the bonnet can be raised
slightly, it is not properly engaged.
OJAPE033014
4
25
English 
