106
2-1. Instrument cluster
■ Hybrid System Indicator
Charge area
Shows regeneration
*
status.
Regenerated energy will be used to charge
the hybrid battery (traction battery).
Eco area
Shows that the vehicle is being driven in an
Eco-friendly manner.
By keeping the bar display within Eco area,
more Eco-friendly driving can be achieved.
Power area
Shows that an Eco-friendly driving range is
being exceeded (during full power driving
etc.)
Hybrid Eco area
Shows that gasoline engine power is not
being used very often.
The gasoline engine will automatically stop
and restart under various conditions.
*
: When used in this manual, regeneration
refers to the conversion of energy cre-
ated by the movement of the vehicle into
electrical energy.
In the following situation, the Hybrid System
Indicator does not operate.
● “READY” indicator is not illuminated.
● The shift position is in other than D or S.
■ Distance to empty
● This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
● When only a small amount of fuel is
added to the tank, the display may not be
updated. When refueling, turn the power
switch off. If the vehicle is refueled with-
out turning the power switch off, the dis-
play may not be updated.
● When “Refuel” is displayed, the remain-
ing fuel amount is low and the distance
that can be driven with the remaining fuel
cannot be calculated. Refuel immedi-
ately.
■ Manually updating the fuel gauge and
possible driving range
The fuel gauge and the possible driving
range are linked. If the displays of the fuel
gauge and possible driving range do not
update after adding a small amount of fuel,
the displays can be updated by performing
the following procedure.
1 Stop the vehicle on a level surface.
2 Press the “ODO TRIP” switch to
change the odometer and trip meter
display to odometer.
3 Turn the power switch off.
4 While pressing and holding the “ODO
TRIP” switch, turn the power switch to
ON.
5 Continue to hold the “ODO TRIP”
switch for approximately 5 seconds,
and then release it once the odometer
begins flashing.
Updating is complete once the odometer
flashes for approximately 5 seconds and
then the display returns to normal.
■ Outside temperature display
● Displays the outside temperature within
the range of -40°C (-40°F) to 60°C
(140°F)
● When the outside temperature is
approximately 3°C (37°F). or lower, the
indicator will flash for approximately
10 seconds, then stay on.
● In the following situations, the correct
outside temperature may not be dis-
A