2024-2026 Lexus LBX SUV Vehicle status information and indicators -> Gauges and meters (with 12.3-inch display) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Vehicle status information and indicators -> Gauges and meters (with 12.3-inch display) for Your Lexus LBX SUV First Generation (2024-2026)

103
2
2-1. Instrument cluster
Vehicle status information and indicators
■ Locations of gauges and meters
The meter display type setting can be changed. (P.556)
Type 1/Type 3
The location of some displayed items and the units of measure may differ depending on the
intended destination of the vehicle.
Multi-information display
Presents the driver with a variety of vehicle data (P.110)
Displays warning messages if a malfunction occurs (P.499)
Outside temperature (P.106)
Analog meter (Type 1 only)
Depending on the selected drive mode or certain settings, the display will change.
(P.556)
Tachometer:
Displays the engine speed in revolutions per minute
Hybrid System Indicator:
Displays hybrid system output or regeneration level (P.106)
Digital speedometer
Displays the vehicle speed
Shift position/shift range (P.197)
Gauges and meters (with 12.3-inch display)
Meter display
A
B
C
D
E
104
2-1. Instrument cluster
Clock
The GPS clock’s time is automatically adjusted by utilizing GPS time information.
For details, refer to the “MULTIMEDIA OWNER’S MANUAL”.
Distance to empty
Displays the driving range with remaining fuel (P.106)
Fuel gauge
Displays the quantity of fuel remaining in the tank.
In the following situations, the actual quantity of fuel remaining in the tank may not be dis-
played correctly. Refer to P.106 if the actual quantity of fuel remaining in the tank is not dis-
played correctly.
• A small amount of fuel is added.
• Fuel is added with the fuel gauge near or at “F”.
• The vehicle is stopped on an uneven surface, such as a slope.
• The vehicle is driven on a slope or around a curve.
Engine coolant temperature gauge
Displays the engine coolant temperature
Odometer and trip meter display (P.102)
Type 2
The location of some displayed items and the units of measure may differ depending on the
intended destination of the vehicle.
Analog meter
Analog meter can be changed on the settings. (P.556)
Tachometer:
Displays the engine speed in revolutions per minute
F
G
H
I
J
A
105
2
2-1. Instrument cluster
Vehicle status information and indicators
Hybrid System Indicator:
Displays hybrid system output or regeneration level (P.106)
Multi-information display
Presents the driver with a variety of vehicle data (P.110)
Displays warning messages if a malfunction occurs (P.499)
Outside temperature (P.106)
Digital speedometer
Displays the vehicle speed
Shift position/shift range (P.197)
Clock
The GPS clock’s time is automatically adjusted by utilizing GPS time information. For
details, refer to the “MULTIMEDIA OWNER’S MANUAL”.
Analog speedometer
Displays the vehicle speed
Distance to empty
Displays the driving range with remaining fuel (P.106)
Fuel gauge
Displays the quantity of fuel remaining in the tank.
In the following situations, the actual quantity of fuel remaining in the tank may not be dis-
played correctly. Refer to P.106 if the actual quantity of fuel remaining in the tank is not dis-
played correctly.
• A small amount of fuel is added.
• Fuel is added with the fuel gauge near or at “F”.
• The vehicle is stopped on an uneven surface, such as a slope.
• The vehicle is driven on a slope or around a curve.
Engine coolant temperature gauge
Displays the engine coolant temperature
Odometer and trip meter display (P.102)
■ The meters and display illuminate when
The power switch is in ON.
■ Engine speed
On Hybrid Electric Vehicles, engine speed
is precisely controlled in order to help
improve fuel efficiency and reduce exhaust
emissions etc.
There are times when the engine speed that
is displayed may differ even when vehicle
operation and driving conditions are the
same.
B
C
D
E
F
G
H
I
J
K
106
2-1. Instrument cluster
■ Hybrid System Indicator
Charge area
Shows regeneration
*
status.
Regenerated energy will be used to charge
the hybrid battery (traction battery).
Eco area
Shows that the vehicle is being driven in an
Eco-friendly manner.
By keeping the bar display within Eco area,
more Eco-friendly driving can be achieved.
Power area
Shows that an Eco-friendly driving range is
being exceeded (during full power driving
etc.)
Hybrid Eco area
Shows that gasoline engine power is not
being used very often.
The gasoline engine will automatically stop
and restart under various conditions.
*
: When used in this manual, regeneration
refers to the conversion of energy cre-
ated by the movement of the vehicle into
electrical energy.
In the following situation, the Hybrid System
Indicator does not operate.
● “READY” indicator is not illuminated.
● The shift position is in other than D or S.
■ Distance to empty
● This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
● When only a small amount of fuel is
added to the tank, the display may not be
updated. When refueling, turn the power
switch off. If the vehicle is refueled with-
out turning the power switch off, the dis-
play may not be updated.
● When “Refuel” is displayed, the remain-
ing fuel amount is low and the distance
that can be driven with the remaining fuel
cannot be calculated. Refuel immedi-
ately.
■ Manually updating the fuel gauge and
possible driving range
The fuel gauge and the possible driving
range are linked. If the displays of the fuel
gauge and possible driving range do not
update after adding a small amount of fuel,
the displays can be updated by performing
the following procedure.
1 Stop the vehicle on a level surface.
2 Press the “ODO TRIP” switch to
change the odometer and trip meter
display to odometer.
3 Turn the power switch off.
4 While pressing and holding the “ODO
TRIP” switch, turn the power switch to
ON.
5 Continue to hold the “ODO TRIP”
switch for approximately 5 seconds,
and then release it once the odometer
begins flashing.
Updating is complete once the odometer
flashes for approximately 5 seconds and
then the display returns to normal.
■ Outside temperature display
● Displays the outside temperature within
the range of -40°C (-40°F) to 60°C
(140°F)
● When the outside temperature is
approximately 3°C (37°F). or lower, the
indicator will flash for approximately
10 seconds, then stay on.
● In the following situations, the correct
outside temperature may not be dis-
A
B
C
D
107
2
2-1. Instrument cluster
Vehicle status information and indicators
played, or the display may take longer
than normal to change:
• When stopped, or driving at low speeds
(less than 20 km/h [12 mph])
• When the outside temperature has
changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
● When “--” or “E” is displayed, the system
may be malfunctioning. Take your vehicle
to any authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
■ Liquid crystal display
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
■ Free/Open Source Software Informa-
tion
This product contains Free/Open Source
Software (FOSS). The license information
and/or the source code of such FOSS can
be found at the following URL.
https://www.denso.com/global/en/
opensource/meter/toyota/
■ Customization
Some functions can be customized.
(P.556)
■ Display items
Odometer
Displays the total distance the vehicle has
been driven.
Trip meter A/trip meter B
Displays the distance the vehicle has been
driven since the meter was last reset. Trip
meters A and B can be used to record and
display different distances independently.
Distance until next engine oil
change
Displays the distance the vehicle can be
driven until an oil change is necessary.
■ Changing the display
Each time the “ODO TRIP” switch is
pressed, the displayed item will be
changed. When the trip meter is dis-
played, pressing and holding the switch
will reset the trip meter.
WARNING
■ The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear num-
ber appearing on the display. This lag
could cause the driver to downshift
again, causing rapid and excessive
engine braking and possibly an accident
resulting in death or injury.
NOTICE
■ To prevent damage to the engine and
its components
● Do not let the indicator needle of the
tachometer enter the red zone, which
indicates the maximum engine speed.
● The engine may be overheating if the
engine coolant temperature gauge is
in the red zone (H); or “Engine Coo-
lant Temp High Stop in a Safe Place
See Owner’s Manual” is shown on the
multi-information display. In this case,
immediately stop the vehicle in a safe
place, and check the engine after it has
cooled completely. (P.539)
Odometer and trip meter dis-
play
108
2-1. Instrument cluster
■ Pop-up display
Distance until the next engine oil
change will be displayed when a warn-
ing message indicating that oil mainte-
nance should be performed soon or is
required is displayed.
The meter brightness can be adjusted.
1 Brighter
2 Darker
■ Brightness of the meter lights (day mode
and night mode)
The brightness of the meter lights can be
adjusted individually.
In the following situations, the meters
changes between day mode and night
mode.
● Day mode: When the tail lights are off or
when the tail lights are on but the sur-
rounding area is bright
● Night mode: When the tail lights are on
and the surrounding area is dark
Adjusting the meter brightness

Related Topics

Popular Owner Manuals