2024-2026 Lexus LBX SUV Vehicle status information and indicators -> Instrument cluster User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Vehicle status information and indicators -> Instrument cluster for Your Lexus LBX SUV First Generation (2024-2026)

92
2-1. Instrument cluster
2-1.Inst rument cluste r
Vehicles with 7-inch display
The units used on the meters and some indicators may differ depending on the tar-
get region.
Type 1 (vehicles with 12.3-inch display)
The units used on the meters and some indicators may differ depending on the tar-
Warning lights and indicators
The warning lights and indicators inform the driver of the status of the vehicle’s
various systems.
Instrument cluster
93
2
2-1. Instrument cluster
Vehicle status information and indicators
get region.
Type 2 (vehicles with 12.3-inch display)
The units used on the meters and some indicators may differ depending on the tar-
get region.
Type 3 (vehicles with 12.3-inch display)
The units used on the meters and some indicators may differ depending on the tar-
get region.
Warning lights inform the driver of
malfunctions in the indicated vehicle’s
systems.
Warning lights
94
2-1. Instrument cluster
*1
: These lights come on when the power
switch is turned to ON to indicate that a
system check is being performed. They
will turn off after the hybrid system is on,
or after a few seconds. There may be a
malfunction in a system if the lights do
not come on, or turn off. Have the vehi-
cle inspected by any authorized Lexus
retailer or Lexus authorized repairer, or
(Red)
Brake system warning light
*1
(P.490)
(Yellow)
Brake system warning light
*1
(P.490)
High coolant temperature
warning light
*2
(P.490)
Charging system warning
light
*2
(P.491)
Low engine oil pressure warn-
ing light
*2
(P.491)
Hybrid system overheat warn-
ing light
*2
(P.491)
Malfunction indicator lamp
*1
(P.491)
SRS warning light
*1
(P.492)
ABS warning light
*1
(P.492)
Inappropriate pedal operation
warning light
*2
(P.492)
(Red)
Electric power steering system
warning light
*1
(P.493)
(Yellow)
Electric power steering system
warning light
*1
(P.493)
Low fuel level warning light
(P.493)
Driver’s and front passenger’s
seat belt reminder light
(P.493)
Rear passengers’ seat belt
reminder lights
*3
(P.494)
Rear passengers’ seat belt
reminder lights
*4
(P.494)
Tire pressure warning light
*1
(P.494)
PCS warning light
*1
(P.495)
(Yellow)
LTA indicator (P.495)
(Yellow)
LDA indicator (P.495)
(Yellow)
PDA indicator (P.495)
(Yellow)
Cruise control indicator
(P.495)
(Yellow)
Dynamic radar cruise control
indicator (P.495)
(Yellow)
Speed limiter indicator
(P.496)
Driving assist information indi-
cator
*1
(P.496)
Lexus parking assist-sensor
OFF indicator
*1
(P.496)
Slip indicator
*1
(P.497)
(Flashes)
Parking brake indicator
(P.497)
(Flashes)
Brake hold operated indica-
tor
*1
(P.497)
95
2
2-1. Instrument cluster
Vehicle status information and indicators
any reliable repairer.
*2
: This light illuminates on the multi-infor-
mation display with a message.
*3
: Vehicles with 7-inch display
*4
: Vehicles with 12.3-inch display
The indicators inform the driver of the
operating state of the vehicle’s various
systems.
WARNING
■ If a safety system warning light does
not come on
Should a safety system light such as the
ABS and SRS warning light not come on
when you start the hybrid system, this
could mean that these systems are not
available to help protect you in an acci-
dent, which could result in death or seri-
ous injury. Have the vehicle inspected by
any authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer immediately if this occurs.
Indicators
Turn signal indicator (P.204)
Tail light indicator (P.211)
Headlight high beam indicator
(P.212)
AHS indicator (if equipped)
(P.215)
AHB indicator (P.218)
Front fog light indicator (if
equipped) (P.220)
Rear fog light indicator
(P.220)
PCS warning light
*1, 2
(P.243)
(White)
LTA indicator (P.257)
(Green)
LTA indicator (P.257)
(Yellow)
(Flashes)
LTA indicator (P.257)
(Green)
LDA indicator (P.264)
(Yellow)
(Flashes)
LDA indicator (P.264)
LDA OFF indicator
*2
(P.264)
(White)
PDA indicator (P.270)
(Green)
PDA indicator (P.270)
(Green)
Cruise control indicator
(P.294)
(White)
Cruise control indicator
(P.294)
(Green)
Dynamic radar cruise control
indicator (P.289)
(White)
Dynamic radar cruise control
indicator (P.289)
(Green)
Speed limiter indicator
(P.298)
96
2-1. Instrument cluster
*1
: These lights come on when the power
switch is turned to ON to indicate that a
system check is being performed. They
will turn off after the hybrid system is on,
or after a few seconds. There may be a
malfunction in a system if the lights do
not come on, or turn off. Have the vehi-
cle inspected by any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
*2
: This light comes on when the system is
turned off.
*3
: This light illuminates on the multi-infor-
mation display with a message.
*4
: This light illuminates on the outside rear
view mirrors.
*5
: When the outside temperature is
approximately 3°C (37°F) or lower,
this indicator will flash for approxi-
mately 10 seconds, then stay on.
*6
: Vehicles without Center Display or rear
camera
*7
: Vehicles with 7-inch display
*8
: Vehicles with 12.3-inch display
■ Lexus parking assist-sensor OFF indica-
tor
Vehicles without Center Display: The indi-
cators turn off when the shift position is
changed to R regardless of whether the
Lexus parking assist-sensor function is
turned on or off.
■ Stop light indicator
This light comes on when the stop lights are
illuminated by the operation of the brake
pedal or the driving assist system.
(White)
Speed limiter indicator
(P.298)
Driving assist information indi-
cator
*1, 2
(P.304, 316, 328,
334, 337)
Outside rear view mirror indi-
cators
*4
(P.303, 315, 328)
Lexus parking assist-sensor
OFF indicator
*1, 2
(if equipped)
(P.320)
Lexus parking assist-sensor
detection indicator
*1, 6
(if
equipped) (P.319)
(Flashes)
Slip indicator
*1
(P.385)
VSC OFF indicator
*1, 2
(P.385)
Smart entry & start system indi-
cator
*3
(P.191)
“READY” indicator (P.191)
EV drive mode indicator
(P.195)
Parking brake indicator
(P.205)
Brake hold standby indicator
*1
(P.208)
Brake hold operated indica-
tor
*1
(P.208)
EV indicator (P.77)
Low outside temperature indi-
cator
*5
(P.106)
Stop light indicator
*7
(P.96)
Stop light indicator
*8
(P.96)
Eco drive mode indicator
(P.202)
97
2
2-1. Instrument cluster
Vehicle status information and indicators
■ Locations of gauges and meters
Type 1
Multi-information display
Presents the driver with a variety of vehicle data and displays warning messages if a mal-
function occurs. (P.109, 499)
Shift position/shift range
Outside temperature
Displays the ambient temperature within the range of -40°C (-40°F) to 60°C (140°F).
Tachometer/Hybrid System Indicator
Depending on the selected drive mode or certain settings, the display will change.
(P.556)
Tachometer: Displays the engine speed in revolutions per minute.
Hybrid System Indicator: Displays hybrid system output or regeneration level. (P.100)
Clock
Automatically adjusts the time by using the GPS time information (GPS clock). For details,
refer to the “MULTIMEDIA OWNER’S MANUAL”.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Fuel gauge
Gauges and meters (with 7-inch display)
Meter display
A
B
C
D
E
F
G
98
2-1. Instrument cluster
Displays the quantity of fuel remaining in the tank.
Digital speedometer
Displays the vehicle speed.
Odometer and trip meter display (P.102)
Type 2
Multi-information display
Presents the driver with a variety of vehicle data and displays warning messages if a mal-
function occurs. (P.109, 499)
Shift position/shift range
Outside temperature
Displays the ambient temperature within the range of -40°C (-40°F) to 60°C (140°F).
Analog speedometer
Displays the vehicle speed.
Clock
Automatically adjusts the time by using the GPS time information (GPS clock). For details,
refer to the “MULTIMEDIA OWNER’S MANUAL”.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Digital speedometer
Displays the vehicle speed.
H
I
A
B
C
D
E
F
G
H
99
2
2-1. Instrument cluster
Vehicle status information and indicators
Odometer and trip meter display (P.101)
Type 3
Multi-information display
Presents the driver with a variety of vehicle data and displays warning messages if a mal-
function occurs. (P.109, 499)
Shift position/shift range
Outside temperature
Displays the ambient temperature within the range of -40°C (-40°F) to 60°C (140°F).
Analog speedometer
Displays the vehicle speed.
Tachometer/Hybrid System Indicator
Depending on the selected drive mode or certain settings, the display will change.
(P.556)
Tachometer: Displays the engine speed in revolutions per minute.
Hybrid System Indicator: Displays hybrid system output or regeneration level. (P.100)
Clock
Automatically adjusts the time by using the GPS time information (GPS clock). For details,
refer to the “Multimedia Owner’s Manual”.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Fuel gauge
Displays the quantity of fuel remaining in the tank.
I
A
B
C
D
E
F
G
H
100
2-1. Instrument cluster
Odometer and trip meter display (P.102)
■ The meters and display illuminate when
The power switch is in ON.
■ Engine speed
On Hybrid Electric Vehicles, engine speed
is precisely controlled in order to help
improve fuel efficiency and reduce exhaust
emissions etc.
There are times when the engine speed that
is displayed may differ even when vehicle
operation and driving conditions are the
same.
■ Hybrid System Indicator
Type 1
This illustration is for explanation only and
may differ depending on the specifications
of the vehicle.
Charge area
Shows regeneration
*
status.
Eco area
Shows that the vehicle is being driven in an
Eco-friendly manner.
Power area
Shows that an Eco-friendly driving range is
being exceeded (during full power driving
etc.)
Hybrid Eco area
Shows that gasoline engine power is not
being used very often.
Type 3
This illustration is for explanation only and
may differ depending on the specifications
of the vehicle.
Charge area
Shows regeneration
*
status.
Eco area
Shows that the vehicle is being driven in an
Eco-friendly manner.
Power area
Shows that an Eco-friendly driving range is
being exceeded (during full power driving
etc.)
Hybrid Eco area
Shows that gasoline engine power is not
being used very often.
The gasoline engine will automatically stop
and restart under various conditions.
● By keeping the indicator needle within
Eco area, more Eco-friendly driving can
be achieved.
● Charge area indicates regeneration
*
sta-
tus. Regenerated energy will be used to
charge the hybrid battery (traction bat-
tery).
*
: When used in this manual, regeneration
refers to the conversion of energy cre-
ated by the movement of the vehicle into
electrical energy.
In the following situation, the Hybrid System
I
A
B
C
D
A
B
C
D
101
2
2-1. Instrument cluster
Vehicle status information and indicators
Indicator does not operate.
● “READY” indicator is not illuminated.
● The shift position is in other than D or S.
■ Changing between the tachometer or
hybrid system indicator
Depending on the current drive mode or
settings, the displays will change as follows.
Settings can be changed on the Center Dis-
play. (P.556)
● The tachometer will be displayed in the
following situations.
• When the meter display type setting is set
to display type 1 or display type 3
• When the tachometer setting is set to
always display the tachometer
• When the tachometer setting is set to
change according to the driving mode
and a driving mode other than Eco drive
mode is selected
● The hybrid system indicator will be dis-
played in the following situations.
• When the meter display type setting is set
to display type 1 or display type 3
• When the tachometer setting is set to
always display the hybrid system indica-
tor
• When the tachometer setting is set to
change according to the driving mode
and Eco drive mode is selected
■ Outside temperature display
● In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change:
• When stopped, or driving at low speeds
(less than 20 km/h [12 mph])
• When the outside temperature has
changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
● When “--” or “E” is displayed, the system
may be malfunctioning. Take your vehicle
to any authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
■ Liquid crystal display
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
■ Free/Open Source Software Informa-
tion
This product contains Free/Open Source
Software (FOSS). The license information
and/or the source code of such FOSS can
be found at the following URL.
https://www.denso.com/global/en/
opensource/meter/toyota/
WARNING
■ The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear num-
ber appearing on the display. This lag
could cause the driver to downshift
again, causing rapid and excessive
engine braking and possibly an accident
resulting in death or injury.
NOTICE
■ To prevent damage to the engine and
its components
● Do not let the indicator needle of the
tachometer enter the red zone, which
indicates the maximum engine speed.
● The engine may be overheating if the
engine coolant temperature gauge is
in the red zone (H); or “Engine Coo-
lant Temp High Stop in a Safe Place
See Owner’s Manual” is shown on the
multi-information display. In this case,
immediately stop the vehicle in a safe
place, and check the engine after it has
cooled completely. (P.539)
102
2-1. Instrument cluster
■ Display items
Odometer
Displays the total distance the vehicle has
been driven.
Trip meter A/trip meter B
Displays the distance the vehicle has been
driven since the meter was last reset. Trip
meters A and B can be used to record and
display different distances independently.
Distance until next engine oil
change
Displays the distance the vehicle can be
driven until an oil change is necessary.
■ Changing the display
Each time the “ODO TRIP” switch is
pressed, the displayed item will be
changed. When the trip meter is dis-
played, pressing and holding the switch
will reset the trip meter.
The meter brightness can be adjusted.
1 Darker
2 Brighter
■ Brightness of the meters (day mode and
night mode)
The brightness of the meters is changed
between day mode and night mode.
● Day mode: When the tail lights are off or
when the tail lights are on but the sur-
rounding area is bright
● Night mode: When the tail lights are on
and the surrounding area is dark
Odometer and trip meter dis-
play
Adjusting the meter brightness
103
2
2-1. Instrument cluster
Vehicle status information and indicators
■ Locations of gauges and meters
The meter display type setting can be changed. (P.556)
Type 1/Type 3
The location of some displayed items and the units of measure may differ depending on the
intended destination of the vehicle.
Multi-information display
Presents the driver with a variety of vehicle data (P.110)
Displays warning messages if a malfunction occurs (P.499)
Outside temperature (P.106)
Analog meter (Type 1 only)
Depending on the selected drive mode or certain settings, the display will change.
(P.556)
Tachometer:
Displays the engine speed in revolutions per minute
Hybrid System Indicator:
Displays hybrid system output or regeneration level (P.106)
Digital speedometer
Displays the vehicle speed
Shift position/shift range (P.197)
Gauges and meters (with 12.3-inch display)
Meter display
A
B
C
D
E
104
2-1. Instrument cluster
Clock
The GPS clock’s time is automatically adjusted by utilizing GPS time information.
For details, refer to the “MULTIMEDIA OWNER’S MANUAL”.
Distance to empty
Displays the driving range with remaining fuel (P.106)
Fuel gauge
Displays the quantity of fuel remaining in the tank.
In the following situations, the actual quantity of fuel remaining in the tank may not be dis-
played correctly. Refer to P.106 if the actual quantity of fuel remaining in the tank is not dis-
played correctly.
• A small amount of fuel is added.
• Fuel is added with the fuel gauge near or at “F”.
• The vehicle is stopped on an uneven surface, such as a slope.
• The vehicle is driven on a slope or around a curve.
Engine coolant temperature gauge
Displays the engine coolant temperature
Odometer and trip meter display (P.102)
Type 2
The location of some displayed items and the units of measure may differ depending on the
intended destination of the vehicle.
Analog meter
Analog meter can be changed on the settings. (P.556)
Tachometer:
Displays the engine speed in revolutions per minute
F
G
H
I
J
A
105
2
2-1. Instrument cluster
Vehicle status information and indicators
Hybrid System Indicator:
Displays hybrid system output or regeneration level (P.106)
Multi-information display
Presents the driver with a variety of vehicle data (P.110)
Displays warning messages if a malfunction occurs (P.499)
Outside temperature (P.106)
Digital speedometer
Displays the vehicle speed
Shift position/shift range (P.197)
Clock
The GPS clock’s time is automatically adjusted by utilizing GPS time information. For
details, refer to the “MULTIMEDIA OWNER’S MANUAL”.
Analog speedometer
Displays the vehicle speed
Distance to empty
Displays the driving range with remaining fuel (P.106)
Fuel gauge
Displays the quantity of fuel remaining in the tank.
In the following situations, the actual quantity of fuel remaining in the tank may not be dis-
played correctly. Refer to P.106 if the actual quantity of fuel remaining in the tank is not dis-
played correctly.
• A small amount of fuel is added.
• Fuel is added with the fuel gauge near or at “F”.
• The vehicle is stopped on an uneven surface, such as a slope.
• The vehicle is driven on a slope or around a curve.
Engine coolant temperature gauge
Displays the engine coolant temperature
Odometer and trip meter display (P.102)
■ The meters and display illuminate when
The power switch is in ON.
■ Engine speed
On Hybrid Electric Vehicles, engine speed
is precisely controlled in order to help
improve fuel efficiency and reduce exhaust
emissions etc.
There are times when the engine speed that
is displayed may differ even when vehicle
operation and driving conditions are the
same.
B
C
D
E
F
G
H
I
J
K
106
2-1. Instrument cluster
■ Hybrid System Indicator
Charge area
Shows regeneration
*
status.
Regenerated energy will be used to charge
the hybrid battery (traction battery).
Eco area
Shows that the vehicle is being driven in an
Eco-friendly manner.
By keeping the bar display within Eco area,
more Eco-friendly driving can be achieved.
Power area
Shows that an Eco-friendly driving range is
being exceeded (during full power driving
etc.)
Hybrid Eco area
Shows that gasoline engine power is not
being used very often.
The gasoline engine will automatically stop
and restart under various conditions.
*
: When used in this manual, regeneration
refers to the conversion of energy cre-
ated by the movement of the vehicle into
electrical energy.
In the following situation, the Hybrid System
Indicator does not operate.
● “READY” indicator is not illuminated.
● The shift position is in other than D or S.
■ Distance to empty
● This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
● When only a small amount of fuel is
added to the tank, the display may not be
updated. When refueling, turn the power
switch off. If the vehicle is refueled with-
out turning the power switch off, the dis-
play may not be updated.
● When “Refuel” is displayed, the remain-
ing fuel amount is low and the distance
that can be driven with the remaining fuel
cannot be calculated. Refuel immedi-
ately.
■ Manually updating the fuel gauge and
possible driving range
The fuel gauge and the possible driving
range are linked. If the displays of the fuel
gauge and possible driving range do not
update after adding a small amount of fuel,
the displays can be updated by performing
the following procedure.
1 Stop the vehicle on a level surface.
2 Press the “ODO TRIP” switch to
change the odometer and trip meter
display to odometer.
3 Turn the power switch off.
4 While pressing and holding the “ODO
TRIP” switch, turn the power switch to
ON.
5 Continue to hold the “ODO TRIP”
switch for approximately 5 seconds,
and then release it once the odometer
begins flashing.
Updating is complete once the odometer
flashes for approximately 5 seconds and
then the display returns to normal.
■ Outside temperature display
● Displays the outside temperature within
the range of -40°C (-40°F) to 60°C
(140°F)
● When the outside temperature is
approximately 3°C (37°F). or lower, the
indicator will flash for approximately
10 seconds, then stay on.
● In the following situations, the correct
outside temperature may not be dis-
A
B
C
D
107
2
2-1. Instrument cluster
Vehicle status information and indicators
played, or the display may take longer
than normal to change:
• When stopped, or driving at low speeds
(less than 20 km/h [12 mph])
• When the outside temperature has
changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
● When “--” or “E” is displayed, the system
may be malfunctioning. Take your vehicle
to any authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
■ Liquid crystal display
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
■ Free/Open Source Software Informa-
tion
This product contains Free/Open Source
Software (FOSS). The license information
and/or the source code of such FOSS can
be found at the following URL.
https://www.denso.com/global/en/
opensource/meter/toyota/
■ Customization
Some functions can be customized.
(P.556)
■ Display items
Odometer
Displays the total distance the vehicle has
been driven.
Trip meter A/trip meter B
Displays the distance the vehicle has been
driven since the meter was last reset. Trip
meters A and B can be used to record and
display different distances independently.
Distance until next engine oil
change
Displays the distance the vehicle can be
driven until an oil change is necessary.
■ Changing the display
Each time the “ODO TRIP” switch is
pressed, the displayed item will be
changed. When the trip meter is dis-
played, pressing and holding the switch
will reset the trip meter.
WARNING
■ The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear num-
ber appearing on the display. This lag
could cause the driver to downshift
again, causing rapid and excessive
engine braking and possibly an accident
resulting in death or injury.
NOTICE
■ To prevent damage to the engine and
its components
● Do not let the indicator needle of the
tachometer enter the red zone, which
indicates the maximum engine speed.
● The engine may be overheating if the
engine coolant temperature gauge is
in the red zone (H); or “Engine Coo-
lant Temp High Stop in a Safe Place
See Owner’s Manual” is shown on the
multi-information display. In this case,
immediately stop the vehicle in a safe
place, and check the engine after it has
cooled completely. (P.539)
Odometer and trip meter dis-
play
108
2-1. Instrument cluster
■ Pop-up display
Distance until the next engine oil
change will be displayed when a warn-
ing message indicating that oil mainte-
nance should be performed soon or is
required is displayed.
The meter brightness can be adjusted.
1 Brighter
2 Darker
■ Brightness of the meter lights (day mode
and night mode)
The brightness of the meter lights can be
adjusted individually.
In the following situations, the meters
changes between day mode and night
mode.
● Day mode: When the tail lights are off or
when the tail lights are on but the sur-
rounding area is bright
● Night mode: When the tail lights are on
and the surrounding area is dark
Adjusting the meter brightness
109
2
2-1. Instrument cluster
Vehicle status information and indicators
■ Display area
A variety of driving-related information
can be displayed. Depending on the
situation, warning or advice pop-up
displays will also be displayed.
Content display area
Driving support system informa-
tion display area
When a menu icon other than is
selected, if the driving support system
operates, the system operating state will be
displayed.
■ Menu icons
The menu icons will be displayed by
pressing the or meter control
switch.
■ Items displayed in the content dis-
play area
By selecting menu icons on the multi-
information display, the following items
can be displayed.
Driving information display
(P.120)
Energy monitor (P.121)
G-force (P.123)
Blank (P.124)
Navigation system-linked display
(P.119)
Audio system-linked display
(P.120)
Driving support system information
display (P.119)
■ The multi-information display is dis-
played when
The power switch is in ON.
■ Liquid crystal display
P.101
■ When changing driving mode
Background color of the multi-information
display is changed following the selected
driving mode. (P.202)
Multi-information display
(with 7-inch multi-informa-
tion display)
Displayed contents summary
Driving information display
Navigation system-linked dis-
play
A
B
Audio system-linked display
Driving support system infor-
mation display
Warning message
110
2-1. Instrument cluster
Following information is displayed in
each area on the multi-information dis-
play.
Content display area (left)
Content display area (right)
Content display area (center)
Driving support system informa-
tion display area
When driving support system information
is displayed on the content display area,
WARNING
■ Caution for use while driving
● When operating the multi-information
display while driving, pay extra atten-
tion to the safety of the area around
the vehicle.
● Do not look continuously at the multi-
information display while driving as
you may fail to see pedestrians, objects
on the road, etc. ahead of the vehicle.
■ The information display at low tem-
peratures
P.101
■ Cautions during setting up the dis-
play
As the hybrid system needs to be operat-
ing during setting up the display, ensure
that the vehicle is parked in a place with
adequate ventilation. In a closed area
such as a garage, exhaust gases includ-
ing harmful carbon monoxide (CO) may
collect and enter the vehicle. This may
lead to death or a serious health hazard.
NOTICE
■ While setting up the display
To prevent 12-volt battery discharge,
ensure that the hybrid system is operat-
ing while setting up the display features.
Multi-information display
(with 12.3-inch multi-infor-
mation display)
The multi-information display is
used to display fuel efficiency
related information and various
types of driving-related informa-
tion. The multi-information display
can also be used to change the dis-
play settings and other settings.
Display contents
A
B
C
D
111
2
2-1. Instrument cluster
Vehicle status information and indicators
the system operating state will not be dis-
played in this area.
RSA (Road Sign Assist) display
area (if equipped) (P.274)
■ Content display area (center)
Blank (P.124)
Driving support system information
display (P.119)
Map display (if equipped) (P.119)
■ Content display area (left/right)
Blank (P.124)
Fuel Economy (P.119)
EV Driving Ratio (P.119)
Driving support system information
display (P.119)
Navigation system-linked informa-
tion display (P.119)
Audio system-linked display
(P.120)
Drive information display (P.120)
Energy monitor (P.121)
G-force (P.123)
■ The multi-information display is dis-
played when
The power switch is in ON.
■ Liquid crystal display
(P.107)
■ When changing driving mode
Background color of the multi-information
display is changed following the selected
driving mode. (P.202)
E
WARNING
■ Caution for use while driving
● When operating the multi-information
display while driving, pay extra atten-
tion to the safety of the area around
the vehicle.
● Do not look continuously at the multi-
information display while driving as
you may fail to see pedestrians, objects
on the road, etc. ahead of the vehicle.
■ The information display at low tem-
peratures
P.107
112
2-1. Instrument cluster
*
: If equipped
The meter display type setting of head-
up display can be changed. (P.113)
The content displayed will differ
according to the driving conditions and
display mode of the head-up display.
Depending on the situation, pop-up
displays will also be displayed.
■ Full
Illustrations used in this text are intended
as examples, and may differ from the
image that is actually displayed by the
head-up display.
Driving support system informa-
tion display area (P.119)/Naviga-
tion system-linked display
area/Hybrid system Indicator or
Tachometer display area (P.114)
Driving support system informa-
tion display area (P.119)
Speedometer
Shift position/shift range (P.197)
RSA (Road Sign Assist) display (if
equipped) (P.274)
■ Standard
Illustrations used in this text are intended
as examples, and may differ from the
image that is actually displayed by the
head-up display.
Driving support system informa-
tion display area (P.119)
Speedometer
Shift position/shift range (P.197)
RSA (Road Sign Assist) display (if
equipped) (P.274)
Head-up display
*
The head-up display projects a vari-
ety of driving-related information
and the operating state of the driv-
ing support systems on the wind-
shield.
Head-up display
A
B
C
D
E
A
B
C
D
113
2
2-1. Instrument cluster
Vehicle status information and indicators
■ Minimum
Speedometer
■ Head-up display will operate when
The power switch is in ON.
■ When using the head-up display
The head-up display may seem dark or hard
to see when viewed through sunglasses,
especially polarized sunglasses. Adjust the
brightness of the head-up display or
remove your sunglasses.
■ Street name display
Only street names which are included in the
map data will be displayed.
■ Changing settings of the head-up
display
1 Select on the Center Display.
2 Select “Vehicle customise”.
3 Select “Head up display”.
The following settings can be changed.
Enabling/disabling the head-up dis-
play
Select to enabling/disabling the head-up
display.
Head-up display type
Select to change head-up display type.
(P.112)
WARNING
■ When using the head-up display
● Check that the position and brightness
of the head-up display image does not
interfere with safe driving. Incorrect
adjustment of the image’s position or
brightness may obstruct the driver’s
view and lead to an accident, resulting
in death or serious injury.
● Do not continuously look at the head-
up display while driving as you may fail
to see pedestrians, objects on the
road, etc. ahead of the vehicle.
A
NOTICE
■ Head-up display projector
● Do not place any drinks near the head-
up display projector. If the projector
gets wet, electrical malfunctions may
result.
● Do not place anything on or put stick-
ers onto the head-up display projector.
Doing so could interrupt head-up dis-
play indications.
● Do not touch the inside of the head-up
display projector or thrust sharp edges
or the like into the projector.
Doing so could cause mechanical mal-
functions.
Using the head-up display
114
2-1. Instrument cluster
Brightness and vertical position of
the head-up display
Select to adjust the brightness or vertical
position of the head-up display.
Display angle
Select to adjust the angle of the head-up
display.
■ Changing settings with the steering
wheel switches (vehicles with a head-up
display)
If any of the following items have been set as
a favorite steering wheel switch function,
settings of the head-up display can be
changed using the steering wheel switches.
● : Display on/off
● : Display mode
● / : Height
● / : Brightness
■ Enabling/disabling of the head-up dis-
play
If the head-up display is disabled, it will
remain disabled when the power switch is
turned off then back to ON.
■ Display brightness
In addition to the brightness setting, the
brightness of the display will change auto-
matically according to the ambient bright-
ness.
■ Head-up display automatic position
adjustment (if equipped)
If the display position is recorded into mem-
ory, the head-up display will be automati-
cally adjusted to the desired position.
(P.168)
■ When the 12-volt battery is discon-
nected
The customize settings of the head-up dis-
play will be reset.
■ Hybrid System Indicator
Charge area
Eco area
Power area
Displays hybrid system output or regener-
ation level. For details, refer to P.106
WARNING
■ Caution for changing settings of the
head-up display
As the hybrid system needs to be operat-
ing while changing the settings of the
head-up display, ensure that the vehicle
is parked in a place with adequate venti-
lation. In a closed area such as a garage,
exhaust gases including harmful carbon
monoxide (CO) may collect and enter
the vehicle. This may lead to death or a
serious health hazard.
NOTICE
■ When changing the settings of the
head-up display
To prevent 12-volt battery discharge,
ensure that the hybrid system is operat-
ing while changing the settings of the
head-up display.
Hybrid System Indica-
tor/tachometer display area
A
B
C
115
2
2-1. Instrument cluster
Vehicle status information and indicators
■ Tachometer
Displays the engine speed in revolu-
tions per minute.
■ Hybrid System Indicator or tachometer
is displayed when
● Hybrid System Indicator is displayed
when all of the following conditions are
met:
• When LTA (Lane Tracing Assist), LDA
(Lane Departure Alert) and dynamic
radar cruise control is turned off.
• Full mode (P.112) is selected as head-
up display type.
• When Eco driving mode is selected.
● Tachometer is displayed when all of the
following conditions are met:
• When LTA (Lane Tracing Assist), LDA
(Lane Departure Alert) and dynamic
radar cruise control is turned off.
• Full mode (P.112) is selected as head-
up display type.
• When other than Eco driving mode is
selected.
116
2-1. Instrument cluster
Vehicles without a head-up display
/ : Change the screen and
move the cursor
/ : Change the displayed
content and scroll up/down the
screen
Press: Enter/Set
Press and hold: Reset/Display cus-
tomizable items, display the cursor
Return to the previous screen
Call sending/receiving and history
display
Linked with the hands-free system, sending
or receiving call is displayed. For details
regarding the hands-free system, refer to
the “MULTIMEDIA OWNER’S MAN-
UAL”.
Vehicles with a head-up display
Center Display
Steering switch
The function of each switch differs depending on the conditions and settings.
When a switch is touched, the function of each switch is displayed on the head-up display. If
the head-up display is off, or when it is not possible to display content on the head-up dis-
play, the functions will be displayed on the multi-information display.
Displayed content
Components/Operations
A
B
C
D
A
B
117
2
2-1. Instrument cluster
Vehicle status information and indicators
Also, preferred functions for each switch can be set on the Center Display.
Switch function change switch
Each time this switch is pressed, the functions will change.
Press and hold this switch to disappear displayed warning messages.
Switch icon display
The icon of each switch will be displayed. The touched switch will be highlighted. ( )
Switch function guide display
The function guide for the touched switch will be displayed.
■ If the steering wheel switches do not
respond when touched (vehicles with a
head-up display)
● It is easier to make the steering wheel
switches respond by moving your thumb
while touching them.
● If the surface of a steering wheel switch is
dirty, turn the power switch off and then
clean the switches.
● By turning winter glove mode on, the
sensitivity of the switch sensors can be
increased. (P.558)
■ Switching with the steering wheel
switches (vehicles with a head-up dis-
play)
If / is set as a favorite
steering wheel switch function, the display
can be switched by pushing or
.
Driving related information is dis-
played on the following displays.
Multi-information display
Head-up display (If equipped)
Center Display
The items displayed will differ depend-
ing on the display.
■ Changing the meter display type
setting
The meter display type setting can be
changed on the screen of the Cen-
ter Display. (P.556)
■ Changing the screen
Select items from the combination of 3
screens to display on each 3 content
display areas.
Vehicles without head-up display
Press or of the meter control
switches to change the screen.
C
D
F
E
Display of drive information
Switching the display of the
multi-information display (with
12.3-inch display)
118
2-1. Instrument cluster
Warning message
Select to display a warning message.
If there is no warning messages, this
page will not be displayed. (P.125)
Vehicles with head-up display
Press and hold or of
the steering switches to change the
screen.
Warning message
Select to display a warning message.
If there is no warning messages, this page
will not be displayed. (P.125)
■ Changing the display contents
Switches items displayed on each con-
tents display area (left/center/right).
Vehicles without a head-up display
1 Press or to select the
screen.
2 Press and hold to display the
cursor on the content display area
(center).
3 Press or to move the cursor
and select the content display area.
4 Press or to select the items.
Vehicles with a head-up display
1 Press or to select
the screen.
2 Press and hold or
to display the cursor on the content
display area (center).
3 Press or to move
the cursor and select the content
display area.
4 Press steering switch (up/down) to
select the items.
A
A
119
2
2-1. Instrument cluster
Vehicle status information and indicators
Current fuel economy after reset
Displays the driving range with remaining
fuel.
Average fuel economy after reset
*
*
: Use the displayed fuel consumption as a
reference only.
EV driving ratio after starting
Displays the percentage of EV driving
since the hybrid system was started.
*
Elapsed time after starting
Displays the elapsed time since hybrid sys-
tem was started.
*
*
: It is reset each time the hybrid system
stops.
The operating state of the following
systems can be displayed on the multi-
information display or head-up display
(if equipped).
LTA (Lane Tracing Assist)
(P.253)
LCA (Lane Change Assist) (if
equipped) (P.258)
LDA (Lane Departure Alert)
(P.261)
PDA (Proactive Driving Assist)
(P.266)
Dynamic radar cruise control
(P.278)
Cruise control (P.291)
Displays the map data according to the
navigation system.
The following information is displayed
on the multi-information display.
Route guidance to destination
Street name
Compass
Fuel Economy (vehicles with
12.3-inch display)
EV Driving Ratio (vehicles with
12.3-inch display)
A
B
A
B
Driving support system informa-
tion display
Map display (if equipped)
Navigation system-linked dis-
play
120
2-1. Instrument cluster
The operating conditions of the audio
system can be displayed on the multi-
information display.
The following items can be displayed
on the multi-information display.
Use the displayed values as a reference
only.
Vehicles with 7-inch display
Drive information 1
• Current fuel consumption
Displays instantaneous current fuel con-
sumption
• Average fuel consumption
Drive information 2
• Average vehicle speed
• Total driving time
Drive information 3
• Distance to empty
Displays the driving range with remaining
fuel.
• Average fuel economy since starting
Displays the average fuel consumption
since starting.
Vehicles with 12.3-inch display
“Average Speed”: Displays the
average vehicle speed since display
was reset
“Total Time”: Displays elapsed time
since display was reset
■ Distance to empty
● This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
● When only a small amount of fuel is
added to the tank, the display may not be
updated. When refueling, turn the power
switch off. If the vehicle is refueled with-
out turning the power switch off, the dis-
play may not be updated.
AWD operation status display can be
displayed on the Center Display.
■ Displaying AWD operation status
display on the Center Display
1 Select on the main menu.
2 Select “All wheel drive”.
■ AWD operation status
Front tire direction display
Displays the operation amount and direc-
tion of the steering wheel via changes to
the front tires on the display.
Torque distribution display
Displays the drive status of each wheel in 6
steps from 0 to 5.
The illustration used is intended as an
Audio system-linked display
Driving information display
AWD operation status display
(AWD models)
A
B
121
2
2-1. Instrument cluster
Vehicle status information and indicators
example, and may differ from the image
that is actually displayed on the Center
Display.
The tire pressure detected by the tire
pressure warning system can be dis-
played on the Center Display.
■ Displaying the tire pressure on the
Center Display
1 Select on the main menu.
2 Select “Tire pressure”.
■ Tire inflation pressure
P.458
The energy monitor can be used to
check the vehicle drive status, hybrid
system operation status and energy
regeneration status on the Center Dis-
play.
■ Displaying Energy monitor screen
on the Center Display
Touch on the main menu, then
touch “Energy flow” on the sub menu.
For detail regarding the Center Display
refer to “MULTIMEDIA OWNER’S
MANUAL”.
■ Reading the display
The arrows will appear in accordance
with the energy flow. When there is no
energy flow, arrows will not be dis-
played.
Multi-information display (vehicles
with 7-inch display)
The color of the arrows will change as
follows
Blue: When the hybrid battery (trac-
tion battery) is regenerated or
charged.
Orange: When the hybrid battery
(traction battery) is in use.
Red: When the gasoline engine is in
use.
Gasoline engine
Tires
Hybrid battery (traction battery)
Multi-information display (vehicles
with 12.3inch display)
The color of the arrows will change as
follows
Blue: When the hybrid battery (trac-
tion battery) is regenerated or
charged.
Orange: When the hybrid battery
(traction battery) is in use.
Red: When the gasoline engine is in
use.
Tire pressure
Energy monitor
A
B
C
122
2-1. Instrument cluster
Gasoline engine
Front tires
Rear tires
Hybrid battery (traction battery)
Center Display
The color of the arrows will change as
follows
Blue: When the hybrid battery (trac-
tion battery) is regenerated or
charged.
Green: When the hybrid battery
(traction battery) is in use.
Purple: When the gasoline engine is
in use.
The image shows all the arrows as an
example. The actual display will vary
depending on conditions.
Gasoline engine
Front tires
Front electric motor (traction
motor)
Hybrid battery (traction battery)
Rear electric motor (traction
motor) (if equipped)
Rear tires
■ Hybrid battery (traction battery) status
The display changes in 8 levels according
to the remaining charge amount of the
hybrid battery (traction battery).
● The figure shows the multi-information
display as an example for explanation.
● These images are examples only, and
may vary slightly from actual conditions.
Low
High
■ Remaining charge amount warning of
hybrid battery (traction battery)
● The buzzer sounds intermittently when
the hybrid battery (traction battery)
remains without charging while the shift
position is in N, or the remaining charge
amount drops below a certain level. If the
remaining charge amount drops further,
the buzzer sounds continuously.
● When a warning message is shown on
the multi-information display and the
buzzer sounds, follow the instructions
displayed on the screen to perform trou-
bleshooting.
A
B
C
D
A
B
C
D
E
F
A
B
123
2
2-1. Instrument cluster
Vehicle status information and indicators
Displays lateral G-forces on the vehi-
cle on the multi-information display.
Displays around the periphery of the
G-force display, the left and right
steering amount, accelerator pedal
input, and brake fluid pressure.
With 7-inch multi-information dis-
play
Acceleration G-force on the vehi-
cle
Current G-force value (analyzed
value of front/rear and left/right G-
forces)
Record of the maximum G-forces
Accelerator pedal input
Brake fluid pressure
Steering amount
This display is intended for use as a guide-
line. Depending on factors such as the
road surface condition, temperature and
vehicle speed, the display may not show
the actual condition of the vehicle.
With 12.3-inch multi-information
display
Acceleration G-force on the vehi-
cle
Current G-force value (analyzed
value of front/rear and left/right G-
forces)
Record of the maximum G-forces
Accelerator pedal input
Brake fluid pressure
Steering amount
This display is intended for use as a guide-
line. Depending on factors such as the
road surface condition, temperature and
vehicle speed, the display may not show
the actual condition of the vehicle.
Resetting the record of maximum
G-forces
The display is reset each time the hybrid
system is started.
Peak hold function
If lateral G-forces of 0.5 G or greater are
generated, the G-force value display will
turn amber and be held for 2 seconds.
■ G-force display
● The G-force values may not be zero even
when the vehicle is parked, such as when
G-force
A
B
C
D
E
F
A
B
C
D
E
F
124
2-1. Instrument cluster
it is parked on an incline.
● Depending on the vehicle usage condi-
tions, the brake fluid pressure display
may not reach its maximum reading even
though the brake pedal is fully depressed.
● If a 12-volt battery terminal is discon-
nected and reconnected, the steering
amount display may be disabled tempo-
rarily. After driving the vehicle for a while,
the display will be enabled.
Displays no drive information contents
on the multi-information display.
Fuel consumption information can be
displayed on the Center Display.
■ Displaying fuel consumption/his-
tory screen on the Center Display
1 Select on the main menu.
2 Select “Trip information”.
3 Select “Current” or “History”.
■ Current fuel consumption screen
Resetting the history data
Fuel consumption in the past 15
minutes
Current fuel consumption
Average vehicle speed since the
hybrid system was started.
Trip range
Elapsed time since the hybrid sys-
tem was started.
Use the displayed average fuel consump-
tion as a reference. The image is an exam-
ple only, and may vary slightly from actual
conditions.
■ History fuel consumption screen
Latest fuel consumption
Best recorded fuel consumption
Previous fuel consumption record
Resetting the history data
Updating the latest fuel consump-
tion data
Use the displayed average fuel consump-
tion as a reference. The image is an exam-
ple only, and may vary slightly from actual
conditions.
■ Updating the history data
Update the latest fuel consumption by
selecting “Update” to measure the current
fuel consumption again.
■ Resetting the data
The fuel consumption data can be deleted
by selecting “Clear data”.
Blank (No items)
Current fuel consumption/his-
tory screen
A
B
C
D
E
F
A
B
C
D
E
125
2
2-1. Instrument cluster
Vehicle status information and indicators
■ Trip range
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining.
This distance is computed based on your
average fuel consumption.
As a result, the actual distance that can be
driven may differ from that displayed.
Pop-up displays will be displayed on
the multi-information display or the
head-up display (if equipped) when
necessary.
When a pop-up display is displayed, a cur-
rent display may no longer be displayed. In
this case, the display will return after the
pop-up display disappears.
■ Driving support systems
Displays a warning/suggestion/advice
message or the operating state of a rel-
evant system.
Dynamic radar cruise control
Cruise control
LTA (Lane Tracing Assist)
LDA (Lane Departure Alert)
LCA (Lane Change Assist) (if
equipped)
PDA (Proactive Driving Assist)
PCS (Pre-Collision System)
RSA (Road Sign Assist) (if
equipped)
Safe Exit Assist
FCTA (Front Cross Traffic Alert) (if
equipped)
Emergency Driving Stop System
■ Warning message
Some warning messages are displayed
when necessary, according to certain
conditions.
Vehicles with 12.3-inch display: Warn-
ing messages are disappeared by
pressing and holding switch function
change switch. (P.116)
■ Hands-free system status
Displayed when the hands-free system
is operated.
■ Suggestion function
Displays suggestions to the driver in
the following situations. To select a
response to a displayed suggestion,
use the steering switches.
Suggestion to enable the power
back door
If the power back door system is disabled
(setting on the Center Display set to off)
and the power back door switch on the
instrument panel is operated, a suggestion
message will be displayed asking if you
wish to enable the power back door sys-
tem.
Suggestion to turn off the headlights
If the headlights are left on for a certain
amount of time after the power switch has
been turned off, a suggestion message will
be displayed.
Suggestion to close the power win-
dows (linked to windshield wiper
operation)
If the windshield wipers are operated with
a power window open, a suggestion mes-
sage will be displayed asking if you wish to
close the power windows.
Pop-up display information
126
2-1. Instrument cluster
To close all of the power windows, select
“Yes”.
Suggestion to close the power win-
dows (Driving at high speeds)
If the vehicle speed exceeds a certain
speed with a power window open, a sug-
gestion message will be displayed asking if
you wish to close the power windows.
To close all of the power windows, select
“Yes”.
■ Steering wheel switch operation
display
Vehicles without a head-up display
Displayed when an audio remote con-
trol switch or a talk switch on the steer-
ing wheel is operated.
Vehicles with a head-up display
When a steering wheel switch is
touched, the icon of each switch and a
function guide is displayed.
■ Navigation system-linked informa-
tion
Depending on the situation, navigation
system-linked route guidance to desti-
nation may be displayed.
The following items will be displayed
on the multi-information display when
the power switch is turned off.
Distance driven since starting
*
Driving time since starting
*
EV driving ratio since starting
*
Average fuel consumption since
starting
*
*
: It is reset each time the hybrid system
stops.
Items displayed when the power
switch is turned off

Related Topics

Popular Owner Manuals