2019-2026 Lexus UX SUV Driving procedures User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving procedures for Your Lexus UX SUV First Generation (2019-2026)

177
4-2. Driving procedures
4
Driving
4-2.Driving procedures
1 Press the parking brake switch to
check that the parking brake is set.
(P.192)
Parking brake indicator will come on.
2 Firmly depress the brake pedal.
and a message will be displayed on
the multi-information display.
If it is not displayed, the hybrid system can-
not be started.
When the shift position is N, the hybrid sys-
tem cannot start. Shift the shift position to P
when starting the hybrid system. (P.185)
3 Press the power switch shortly and
firmly.
When operating the power switch, one
short, firm press is enough. It is not neces-
sary to press and hold the switch.
If the “READY” indicator turns on, the
hybrid system will operate normally.
Continue depressing the brake pedal until
the “READY” indicator is illuminated.
The hybrid system can be started from any
power switch mode.
4 Check that the “READY” indicator
is illuminated.
The vehicle cannot be driven if the
“READY” indicator is off.
■ Power switch illumination
According to the situation, the power
switch illumination operates as follows.
● When a front door is opened, or the
power switch mode is changed from
ACC or ON to OFF, the power switch
illumination illuminates dimly.
● When depressing the brake pedal with
carrying the electronic key on your per-
son, the power switch illumination illumi-
nates brightly.
● When the power switch is in ACC or
ON, the power switch illumination illumi-
nates.
■ If the hybrid system does not start
● The immobilizer system may not have
been deactivated. (P.71)
Contact your Lexus dealer.
● If a message related to start-up is shown
on the multi-information display, read the
message and follow the instructions.
● If the door is unlocked with the mechani-
cal key, the hybrid system cannot be
started using the smart access system
with push-button start. Refer to P.431 to
start the hybrid system. However, if the
electronic key is carried inside the vehi-
cle and the doors are locked (P.122),
the hybrid system can be started.
Power (ignition) switch
Performing the following opera-
tions when carrying the electronic
key on your person starts the hybrid
system or changes power switch
modes.
Starting the hybrid system
178
4-2. Driving procedures
■ When the ambient temperature is low,
such as during winter driving conditions
● When starting the hybrid system, the
flashing time of the “READY” indicator
may be long. Leave the vehicle as it is
until the “READY” indicator is steady on,
as steady means the vehicle is able to
move.
● When the hybrid battery (traction bat-
tery) is extremely cold (below approxi-
mately -22°F [-30°C]) under the
influence of the outside temperature, it
may not be possible to start the hybrid
system. In this case, try to start the hybrid
system again after the temperature of the
hybrid battery increases due to the out-
side temperature increase etc.
■ Sounds and vibrations specific to a
Hybrid Electric Vehicle
P.64
■ If the 12-volt battery is discharged
The hybrid system cannot be started using
the smart access system with push-button
start. Refer to P.432 to restart the hybrid
system.
■ Electronic key battery depletion
P.114
■ Conditions affecting operation
P.140
■ Note for the entry function
P.141
■ When “Access System with
malfunction See owner’s manual” is dis-
played on the multi-information display
The system may be malfunctioning. Have
the vehicle inspected by your Lexus dealer
immediately.
■ If the “READY” indicator does not
come on
In the event that the “READY” indicator
does not come on even after performing
the proper procedures for starting the vehi-
cle, contact your Lexus dealer immediately.
■ If the hybrid system is malfunctioning
P.69
■ Electronic key battery
P.392
■ Operation of the power switch
● If the switch is not pressed shortly and
firmly, the power switch mode may not
change or the hybrid system may not
start.
● If attempting to restart the hybrid system
immediately after turning the power
switch off, the hybrid system may not start
in some cases. After turning the power
switch off, please wait a few seconds
before restarting the hybrid system.
■ Customization
If the smart access system with push-button
start has been deactivated in a customized
setting, refer to P.430.
1 Stop the vehicle completely.
2
Set the parking brake. (P.192)
WARNING
■ When starting the hybrid system
Always start the hybrid system while sit-
ting in the driver’s seat. Do not depress
the accelerator pedal while starting the
hybrid system under any circumstances.
Doing so may cause an accident result-
ing in death or serious injury.
NOTICE
■ When starting the hybrid system
If the hybrid system becomes difficult to
start, have your vehicle checked by your
Lexus dealer immediately.
■ Symptoms indicating a malfunction
with the power switch
If the power switch seems to be operat-
ing somewhat differently than usual, such
as the switch sticking slightly, there may
be a malfunction. Contact your Lexus
dealer immediately.
Stopping the hybrid system
179
4-2. Driving procedures
4
Driving
3 Press the P position switch.
(P.185)
Check that the shift position indicator
shows P and the parking brake indicator is
illuminated.
4 Press the power switch.
The hybrid system will stop, and the meter
display will be extinguished (the shift posi-
tion indicator will be extinguished a few
seconds after the meter display).
5 Release the brake pedal and check
that “ACCESSORY” or “POWER
ON” is not shown on the meter.
■ When the shift control system malfunc-
tions
When attempting to turn the power switch
off while there is a malfunction in the shift
control system, the power switch mode may
change to ACC. In this case, ACC may be
turned off by applying the parking brake
and pressing the power switch again.
If there is a malfunction in the system, have
the vehicle inspected by your Lexus dealer
immediately.
■ Automatic hybrid system shut off fea-
ture
● The vehicle is equipped with a feature
that automatically shuts off the hybrid sys-
tem when the shift lever is in P with the
hybrid system operating for an extended
period.
● The hybrid system will automatically shut
off after approximately 1 hour if it has
been left running while the shift lever is in
P.
● The timer for the automatic hybrid system
shut off feature will reset if the brake
pedal is depressed or if the shift lever is in
a position other than P.
● After the vehicle is parked, if the door is
locked with the door lock switch
(P.122) from the inside or the mechan-
ical key from the outside, the automatic
hybrid system shut off feature will be dis-
abled. The timer for the automatic hybrid
system shut off feature will be re-enabled
if the driver’s door is opened.
■ Locking the door from outside with the
hybrid system operating
1 With the driver’s door open, pull the
driver’s door handle and insert the
mechanical key.
2 Turn the mechanical key counterclock-
wise.
3 Pull out the mechanical key and close
the door.
180
4-2. Driving procedures
Modes can be changed by pressing
the power switch with the brake pedal
released. (The mode changes each
time the switch is pressed.)
ACCESSORY
POWER ON
1
OFF
The emergency flashers can be used.
2 ACC
*
WARNING
■ Stopping the hybrid system in an
emergency
● If you want to stop the hybrid system in
an emergency while driving the vehi-
cle, press and hold the power switch
for more than 2 seconds, or press it
briefly 3 times or more in succession.
(P.402)
However, do not touch the power
switch while driving except in an emer-
gency. Turning the hybrid system off
while driving will not cause loss of
steering or braking control.
However, power assist for the steering
wheel may be lost making it difficult to
steer smoothly before stopping the
vehicle depending on the remaining
charge in the 12-volt battery or usage
conditions. In this situation, you should
pull over and stop the vehicle as soon
as it is safe to do so.
● If the power switch is operated while
the vehicle is running, a warning mes-
sage will be shown on the multi-infor-
mation display and a buzzer sounds.
● When restarting the hybrid system
after an emergency shutdown, shift the
shift lever to N and press the power
switch shortly and firmly.
■ When parking
Exhaust gases include harmful carbon
monoxide (CO), which is colorless and
odorless. Observe the following precau-
tions.
Failure to do so may cause exhaust gases
to enter the vehicle and may lead to an
accident caused by light-headedness, or
may lead to death or a serious health
hazard.
● If the vehicle is in a poorly ventilated
area or a closed area, such as a
garage, stop the hybrid system.
● Do not leave the vehicle with the
hybrid system operating for a long
time. If such a situation cannot be
avoided, park the vehicle in an open
space and ensure that exhaust fumes
do not enter the vehicle interior.
● Do not leave the hybrid system oper-
ating in an area with snow build-up, or
where it is snowing. If snowbanks build
up around the vehicle while the hybrid
system is operating, exhaust gases
may collect and enter the vehicle.
Changing power switch modes
A
B
181
4-2. Driving procedures
4
Driving
Some electrical components such as the
audio system can be used.
“ACCESSORY” will be displayed on the
meter.
3 ON
All electrical components can be used.
“POWER ON” will be displayed on the
meter.
*
: ACC mode can be enabled/disabled on
the customize menu.(P.469)
■ When ACC customization is in off
With the power switch is turned off, the
multimedia system can still be used for a
certain time until the battery saving function
starts operating.
■ Auto power off function
● If the vehicle is left in ACC or ON (the
hybrid system is not operating) for more
than 20 minutes with the shift position in
P, the power switch will automatically
turn to OFF.
● If the 12-volt battery is low with the shift
position is in P and the power switch is in
ACC or ON (the hybrid system is not
operating), a buzzer sounds and a mes-
sage will be displayed on the multi-infor-
mation display. If this continues, the
power switch is automatically turn to
OFF.
However, this function cannot entirely pre-
vent the 12-volt battery discharge. Do not
leave the vehicle with the power switch in
ACC or ON for long periods of time when
the hybrid system is not operating.
NOTICE
■ To prevent 12-volt battery discharge
● Do not leave the power switch in ACC
or ON for long periods of time without
the hybrid system on.
● If “ACCESSORY” or “POWER ON”
is displayed on the multi-information
display while the hybrid system is not
operating, the power switch is not
OFF. Exit the vehicle after turning the
power switch off.
182
4-2. Driving procedures
Turns EV drive mode on/off
When EV drive mode is turned on, the EV
drive mode indicator will come on.
Pressing the switch when in EV drive mode
will return the vehicle to normal driving
(using the gasoline engine and electric
motor [traction motor]).
■ Situations in which EV drive mode can-
not be turned on
It may not be possible to turn EV drive
mode on in the following situations. If it can-
not be turned on, a buzzer will sound and a
message will be shown on the multi-infor-
mation display.
● The temperature of the hybrid system is
high.
The vehicle has been left in the sun,
driven on a hill, driven at high speeds, etc.
● The temperature of the hybrid system is
low.
The vehicle has been left for a long
period of time, etc.
● The gasoline engine is warming up.
● The hybrid battery (traction battery) is
low.
The remaining battery level indicated in
the energy monitor display is low.
(P.107)
● Vehicle speed is high.
● The accelerator pedal is depressed firmly
or the vehicle is on a hill, etc.
● The windshield defogger is in use.
■ Switching to EV drive mode when the
gasoline engine is cold
After the hybrid system has started and the
“READY” indicator has illuminated, press
the EV drive mode switch before the gaso-
line engine starts to switch to EV drive
mode.
However, depending on vehicle conditions,
EV drive mode may be canceled and nor-
mal driving (using the gasoline engine and
electric motor [traction motor]) may be
resumed.
■ Automatic cancelation of EV drive
mode
When driving in EV drive mode, the gaso-
line engine may automatically restart in the
following situations. When EV drive mode
is canceled, a buzzer will sound, the EV
drive mode indicator will go off after flash-
ing, and a message is displayed on the
multi-information display.
● The hybrid battery (traction battery)
becomes low.
The remaining battery level indicated in
the energy monitor display is low.
(P.107)
● Vehicle speed is high.
● The accelerator pedal is depressed firmly
or the vehicle is on a hill, etc.
EV drive mode
In EV drive mode, electric power is
supplied by the hybrid battery
(traction battery), and only the
electric motor (traction motor) is
used to drive the vehicle.
This mode allows you to drive in res-
idential areas early in the morning
and late at night, or in indoor park-
ing lots, etc., without concern for
noises and gas emissions.
However, when the Acoustic Vehi-
cle Alerting System is active, the
vehicle may produce sound.
Operating instructions
183
4-2. Driving procedures
4
Driving
■ Possible driving distance when driving
in EV drive mode
EV drive mode’s possible driving distance
ranges from a few hundred meters to
approximately 0.6 mile (1 km). However,
depending on vehicle conditions, there are
situations when EV drive mode cannot be
used. (The distance that is possible depends
on the hybrid battery [traction battery] level
and driving conditions.)
■ Fuel economy
The hybrid system is designed to achieve
the best possible fuel economy during nor-
mal driving (using the gasoline engine and
electric motor [traction motor]). Driving in
EV drive mode more than necessary may
lower fuel economy.
■ If “EV Mode Unavailable” is shown on
the multi-information display
The EV drive mode is not available. The
reason the EV drive mode is not available
(the vehicle is idling, battery charge is low,
vehicle speed is higher than the EV drive
mode operating speed range or accelera-
tor pedal is depressed too much) may be
displayed. Use the EV drive mode when it
becomes available.
■ If “EV Mode Deactivated” is shown on
the multi-information display
The EV drive mode has been automatically
canceled. The reason the EV drive mode is
not available (the battery charge is low,
vehicle speed is higher than the EV drive
mode operating speed range or accelera-
tor pedal is depressed too much) may be
displayed. Drive the vehicle for a while
before attempting to turn on the EV drive
mode again.
WARNING
■ Caution while driving
When driving in EV drive mode, pay spe-
cial attention to the area around the vehi-
cle. Because there is no engine noise,
pedestrians, people riding bicycles or
other people and vehicles in the area
may not be aware of the vehicle starting
off or approaching them, so take extra
care while driving. Therefore, take extra
care while driving even if the Acoustic
Vehicle Alerting System is active.
184
4-2. Driving procedures
Vehicles without paddle shift
switches
*
: To improve fuel efficiency and reduce
noise, set the shift position in D for nor-
mal driving.
Vehicles with paddle shift switches
*1
: To improve fuel efficiency and reduce
noise, set the shift position in D for nor-
mal driving. You can choose gear range
suitable for your driving situation by
operating the paddle shift switches.
*2
: By selecting shift ranges using S mode,
you can control accelerating force and
engine braking force.
■ When driving with dynamic radar cruise
control activated
Even when performing the following
actions with the intent of enabling engine
braking, engine braking will not activate
because dynamic radar cruise control will
not be canceled.
● Vehicles with paddle shift switches:
While driving in S mode, downshifting to
5 or 4. (P.189, 190)
● When switching the driving mode to
Sport mode while driving in D position.
(P.290)
■ Restraining sudden start (Drive-Start
Control)
P.171
■ If a message about a shift operation is
shown
To prevent the shift position from being
selected incorrectly or the vehicle from
moving unexpectedly, the shift position may
be changed automatically or operating the
shift lever may be required. In this case,
change the shift position following the mes-
sages on the multi-information display.
■ After recharging/reconnecting the 12-
volt battery
P.434
Hybrid transmission
Select the shift position depending
on your purpose and situation.
Shift position purpose and func-
tions
Shift posi-
tion
Objective or function
P
Parking the vehicle/starting
the hybrid system
R Reversing
N
Neutral
(Condition in which the
power is not transmitted)
D
Normal driving
*
B
Applying engine braking or
strong braking when the
accelerator pedal has been
released on steep downward
slopes etc.
Shift posi-
tion
Objective or function
P
Parking the vehicle/starting
the hybrid system
R Reversing
N
Neutral
(Condition in which the
power is not transmitted)
D
Normal driving
*1
S
S mode driving
*2
(P.190)
Shift posi-
tion
Objective or function
185
4-2. Driving procedures
4
Driving
Vehicles without paddle shift
switches
Shift lever
Operate the shift lever gently and securely
in the direction of the arrow on the shift
position indicator.
To shift to N, slide the shift lever in the
direction of the arrow and hold it.
Release the shift lever after each shifting
operation to allow it to return to its regular
position ( ).
Shifting to B is only possible when the shift
position is in D.
When shifting from P to N, D or R, from N,
D, B or R to P, from D or B to R, or from R
to D, ensure that the brake pedal is being
depressed and the vehicle is stationary.
Shift position indicator
Meter display:
The current shift position is illuminated.
Shift lever display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
WARNING
■ When driving on slippery road sur-
faces
Do not accelerate or shift the shift posi-
tion suddenly.
Sudden changes in engine braking may
cause the vehicle to spin or skid, resulting
in an accident.
NOTICE
■ Hybrid battery (traction battery)
charge
If the shift position is in N, the hybrid bat-
tery (traction battery) will not be
charged. To help prevent the battery
from discharging, avoid leaving the N
position selected for a certain amount of
time.
■ Situations where shift control system
malfunctions are possible
If any of the following situations occur,
shift control system malfunctions are
possible. Immediately stop the vehicle in
a safe place on level ground, apply the
parking brake, and then contact your
Lexus dealer.
● When the warning message indicating
the shift control system malfunction
appears on the multi-information dis-
play. (P.420)
● The display indicates that no shift posi-
tion is selected for more than a few
seconds.
Shift position display and how to
change the shift position
A
B
186
4-2. Driving procedures
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
P position switch
Fully stop the vehicle and set the parking
brake, and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator
shows P.
Vehicles with paddle shift switches
Shift lever
Operate the shift lever gently and securely
in the direction of the arrow on the shift
position indicator.
To shift to N, slide the shift lever in the
direction of the arrow and hold it.
Release the shift lever after each shifting
operation to allow it to return to its regular
position ( ).
Shifting to S is only possible when the shift
position is in D.
When shifting from P to N, D or R, from N,
D, S or R to P, from D or S to R, or from R
to D, ensure that the brake pedal is being
depressed and the vehicle is stationary.
Shift position indicator
Meter display:
The current shift position is illuminated.
Shift lever display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
P position switch
Fully stop the vehicle and set the parking
brake, and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator
shows P.
■ Changing the shift position in each
power switch mode
● The shift position cannot be changed
when the power switch is in ACC or off.
● When the power switch is in ON, if the
“READY” indicator is not illuminated, the
shift position can only be changed to N.
● When the “READY” indicator is illumi-
nated, the shift position can be changed
from P to D, N, or R.
● When the “READY” indicator is flashing,
the shift position cannot be changed from
P to any other position, even if the shift
lever is operated. Operate the shift lever
again after the “READY” indicator
changes from flashing to illuminated.
■ Shifting the shift position from P to other
positions
● While depressing the brake pedal firmly,
operate the shift lever. If the shift lever is
operated without depressing the brake
pedal, the buzzer will sound and the shift-
ing operation will be disabled.
● When selecting the shift position, make
sure that the shift position has been
changed to the desired position by
checking the shift position indicator pro-
vided on the instrument cluster.
C
A
B
C
187
4-2. Driving procedures
4
Driving
● The shift position cannot be changed
from P to B
*1
or S
*2
directly.
*1
: Vehicles without paddle shift switches
*2
: Vehicles with paddle shift switches
■ The shift position cannot be changed
when
In the following situations, a buzzer will
sound to inform you that the shift position
cannot be changed. Use the appropriate
operation to attempt to change the shift
position again.
● When attempting to change the shift
position from P with the brake pedal not
depressed
● When attempting to change the shift
position from P with the accelerator
pedal depressed
● When attempting to change the shift
position from N while stopped or driving
at an extremely low speed with the brake
pedal not depressed
● When attempting to change the shift
position from N while stopped or driving
at an extremely low speed with the accel-
erator pedal depressed
● When attempting to change the shift
position from P or N to B
*1
or S
*2
● When the P position switch is pressed
while driving
When driving at an extremely low speed,
the shift position may change to P.
*1
: Vehicles without paddle shift switches
*2
: Vehicles with paddle shift switches
■ The shift position automatically changes
to N when
In the following situations, a buzzer will
sound to inform you that the shift position
has been changed to N. Use the appropri-
ate operation to attempt to change the shift
position again.
● When attempting to change the shift
position to R while the vehicle is moving
forward
When driving at a low speed, the shift posi-
tion may change to R.
● When attempting to change the shift
position to D while the vehicle is moving
backward
When driving at a low speed, the shift posi-
tion may change to D.
● When attempting to change the shift
position from R to B
*1
or S
*2
*1
: Vehicles without paddle shift switches
*2
: Vehicles with paddle shift switches
■ If the N shift position is selected while
driving
If the shift lever is moved to N while driving
above a certain speed, the shift position will
change to N without holding the shift lever
in the N position. In this situation, a buzzer
will sound and a message will be displayed
on the multi-information display to inform
you that the shift position has been changed
to N.
■ Automatic P position selection function
In the following situations, the shift position
is automatically changed to P.
● When pressing the power switch with the
vehicle stopped while the power switch is
in ON and the shift position is in a posi-
tion other than P (after the shift position
has been changed to P, the power switch
will turn off)
*
● If the driver’s door is opened and all of the
following conditions are met, while the
shift position is in a position other than P:
• The power switch is in ON.
• The driver is not wearing the seat belt.
• The brake pedal is not depressed.
To start off the vehicle after the shift position
is changed to P, operate the shift lever
again.
● When the vehicle is stopped after the
hybrid system has been stopped in an
emergency while driving
● When voltage of the 12-volt battery
drops while the shift position is in a posi-
tion other than P
*
: When the power switch is pressed while
driving at extremely slow speeds, such as
immediately before stopping the vehicle,
188
4-2. Driving procedures
the shift position may automatically
change to P. Make sure that the vehicle is
completely stopped before pressing the
power switch.
■ If the shift position cannot be shifted
from P
There is a possibility that the 12-volt battery
is discharged. Check the 12-volt battery in
this situation. (P.432)
■ Customization
Some functions can be customized.
(P.460)
By performing the following opera-
tions, the shift position can be held in
N until the shift position switches to
P without activating the automatic P
position selection function.
1
Operate the shift lever and change
the shift position to N when the
hybrid system is operating.
2
Return the shift lever to its regular
position ( ).
3
Operate the shift lever to N and
hold it there until the buzzer
sounds.
4
Press the power switch within 5
seconds after the buzzer sounds.
The hybrid system stops with the shift posi-
tion in N.
*
Make sure to check that the buzzer sounds
and “Holding N Push P Switch When
Done” is displayed on the multi-informa-
tion display.
In order to shift to a position other
than N, first press the P position
switch to change the shift position to
P.
Make sure to operate the shift lever
with the hybrid system is operating.
WARNING
■ For the shift lever
● Do not remove the shift lever knob or
use anything but a genuine Lexus shift
lever knob. Also, do not hang anything
on the shift lever.
Doing so could prevent the shift lever
from returning to position, causing
unexpected accidents to occur when
the vehicle is in motion.
● In order to prevent the shift position
from accidentally being changed, do
not touch the shift lever when not using
it.
■ P position switch
● Do not press the P position switch
while the vehicle is moving.
If the P position switch is pressed when
driving at very low speeds (for exam-
ple, directly before stopping the vehi-
cle), the vehicle may stop suddenly
when the shift position switches to P,
which could lead to an accident.
● In order to prevent the shift position
from accidentally being changed, do
not touch the P position switch when
not using it.
NOTICE
■ When exiting the vehicle (driver’s
seat only)
Check that the shift position indicator
shows P and that the parking brake indi-
cator is illuminated before opening the
door and exiting the vehicle.
Keeping the shift position in N
without activating the automatic
P position selection function
189
4-2. Driving procedures
4
Driving
If the hybrid system is not operating,
it may not be possible to hold the
shift position in N.
*
: To keep this state, do not operate the
power switch. If the power switch is
operated repeatedly, the power switch
will turn off after the shift position has
automatically changed to P.
P.290
To drive using temporary shift range
selection, operate the “-” or “+” paddle
shift switch when driving with the shift
position in D.
When the “-” paddle shift switch is
operated, the shift range switches to a
range that enables engine braking
force that is suitable to driving condi-
tions. When the “+” paddle shift switch
is operated, the shift range switches to
a range that is one range higher than
the current range.
Changing the shift range allows
restriction of the highest gear, prevent-
ing unnecessary upshifting and
enabling the level of engine braking
force to be selected.
1 Upshifting
2 Downshifting
The selected shift range, from D1 to D6,
will be displayed in the meter.
To return to normal D position driving, the
“+” paddle shift switch must be held down
for a period of time.
A lower shift range will provide greater
engine braking forces than a higher shift
range.
■ When the “-” paddle shift switch is oper-
ated with the shift position in D
A shift range will be automatically selected.
The highest gear of the first shift range will
be one gear lower than the gear in use
during normal D position driving.
■ Automatic deactivation of shift range
selection in the D position
Shift range selection in the D position will
be deactivated in the following situations:
● When the vehicle comes to a stop
● If the accelerator pedal is depressed for
more than a certain period of time in one
gear step
Selecting the driving mode
Selecting shift ranges in the D
position (vehicles with paddle
shift switches)
Meter dis-
play
Function
D2 - D6
A gear in the range between
D1 and the selected shift
range is automatically cho-
sen depending on vehicle
speed and driving conditions
D1 Setting the shift range at D1
190
4-2. Driving procedures
● When the shift position is shifted to a
position other than D
● When the “+” paddle shift switch is
pressed and held
■ Downshifting restriction warning
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may some-
times be restricted. In some circumstances,
downshifting may not be possible even
when the shift lever or paddle shift switch is
operated. (A buzzer will sound twice.)
To enter S mode, shift the shift position
to S. Shift ranges can be selected by
operating the shift lever or paddle shift
switches.
1 Upshifting
2 Downshifting
The selected shift range, from S1 to S6, will
be displayed in the meter.
The initial shift range in S mode is 4 or 5.
■ Shift ranges and their functions
You can choose from 6 levels of
accelerating force and engine brak-
ing force.
A lower shift range will provide
greater accelerating force and
engine braking force than a higher
shift range, and the engine revolu-
tions will also increase.
■ S mode
● When the shift range is 4 or lower, hold-
ing the shift lever toward “+” sets the shift
range to 6.
● Automatically selects a higher shift range
before the engine speed becomes too
high.
■ Downshifting restriction warning
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may some-
times be restricted. In some circumstances,
downshifting may not be possible even
when the shift lever or paddle shift switch is
operated. (A buzzer will sound twice.)
Selecting shift ranges in the S
mode (vehicles with paddle shift
switches)
191
4-2. Driving procedures
4
Driving
The turn signal lever can be used to
show the following intentions of the
driver.
1 Right turn
2 Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3 times.
3 Lane change to the left (move the
lever partway and release it)
The left hand signals will flash 3 times.
4 Left turn
■ Turn signals can be operated when
The power switch is in ON.
■ If the indicator flashes faster than usual
Check that a light bulb in the front or rear
turn signal lights has not burned out.
■ If the turn signals stop flashing before a
lane change has been performed
Operate the lever again.
Turn signal lever
Operating instructions
192
4-2. Driving procedures
■ Using the manual mode
The parking brake can be set and
released manually.
U.S.A.
Canada
1 Push the switch to set the parking
brake
The parking brake indicator light will turn
on.
Press and hold the parking brake switch if
an emergency occurs and it is necessary to
operate the parking brake while driving.
2 Pull the switch to release the park-
ing brake
• Operate the parking brake switch while
depressing the brake pedal.
• Using the parking brake automatic
release function, the parking brake can
be released by depressing the accelera-
tor pedal. When using this function,
slowly depress the accelerator pedal.
Make sure that the parking brake indicator
light turn off.
■ Turning the automatic mode on
While the vehicle is stopped, press and
hold the parking brake switch until a
message is shown on the multi-infor-
mation display
When the automatic mode is turned
on, the parking brake operates as fol-
lows.
When the shift position is shifted
from P, the parking brake will be
released, and the parking brake
indicator light will turn off.
When the shift position is shifted to
P, the parking brake will be set, and
the parking brake indicator light will
turn on.
Operate the shift position and P posi-
tion switch with the vehicle stopped
and the brake pedal depressed.
Parking brake
The parking brake can be set or
released automatically or manually.
In automatic mode, the parking
brake can be set or released auto-
matically according to shift position
operation. Also, even in automatic
mode, the parking brake can be set
or released manually.
Operating instructions
A
B
193
4-2. Driving procedures
4
Driving
■ Turning the automatic mode off
While the vehicle is stopped, pull and
hold the parking brake switch until a
message is shown on the multi-infor-
mation display
■ Parking brake operation
● When the power switch is not in ON, the
parking brake cannot be released using
the parking brake switch.
● When the power switch is not in ON,
automatic mode (automatic brake setting
and releasing) is not available.
■ Parking brake automatic release func-
tion
● When the shift position is shifted from P,
the parking brake will be released in
automatic mode.
● When all of the following conditions are
met in manual mode, the parking brake
can be released by depressing the accel-
erator pedal.
• The driver’s door is closed
• The driver is wearing the seat belt
• The shift position is in D, S or R
■ If “Parking Brake Temporarily Unavail-
able” is displayed on the multi-informa-
tion display
If the parking brake is operated repeatedly
over a short period of time, the system may
restrict operation to prevent overheating. If
this happens, refrain from operating the
parking brake. Normal operation will return
after about 1 minute.
■ If “Parking Brake Unavailable” or “EPB
Activation Stopped Incompletely” is dis-
played on the multi-information display
Operate the parking brake switch. If the
message does not disappear after operat-
ing the switch several times, the system may
be malfunctioning. Have the vehicle
inspected by your Lexus dealer.
■ Parking brake operation sound
When the parking brake operates, a motor
sound (whirring sound) may be heard. This
does not indicate a malfunction.
■ Parking brake indicator light
● Depending on the power switch mode,
the parking brake indicator light will turn
on and stay on as described below:
ON: Comes on until the parking brake is
released.
Not in ON: Stays on for approximately 15
seconds.
● When the power switch is turned off with
the parking brake set, the parking brake
indicator light will stay on for about 15
seconds. This does not indicate a mal-
function.
■ When the parking brake switch mal-
functions
Automatic mode (automatic brake setting
and releasing) will be turned on automati-
cally.
■ Parking the vehicle
P.166
■ Parking brake engaged warning buzzer
A buzzer will sound if the vehicle is driven
with the parking brake engaged. “Parking
Brake ON” is displayed on the multi-infor-
mation display (with the vehicle reached a
speed of 3 mph [5 km/h]).
■ If the brake system warning light comes
on
P.412
■ Usage in winter time
P.301
194
4-2. Driving procedures
Turn the brake hold system on
The brake hold standby indicator (green)
comes on. While the system is holding
the brake, the brake hold operated indica-
tor (yellow) comes on.
■ Brake hold system operating conditions
The brake hold system cannot be turned on
in the following conditions:
● The driver’s door is not closed.
● The driver is not wearing the seat belt.
● “Parking Brake Unavailable” or “Parking
WARNING
■ When parking the vehicle
Do not leave a child in the vehicle alone.
The parking brake may be released unin-
tentionally and there is the danger of the
vehicle moving that may lead to an acci-
dent resulting in death or serious injury.
NOTICE
■ When parking the vehicle
Before you leave the vehicle, shift the
shift position to P, set the parking brake
and make sure that the vehicle does not
move.
■ When the system malfunctions
Stop the vehicle in a safe place and
check the warning messages.
■ When the parking brake cannot be
released due to a malfunction
Driving the vehicle with the parking
brake set will lead to brake components
overheating, which may affect braking
performance and increase brake wear.
Have the vehicle inspected by your
Lexus dealer immediately if this occurs.
Brake Hold
The brake hold system keeps the
brake applied when the shift posi-
tion is in D, B
*1
, S
*2
, N or P with the
system on and the brake pedal has
been depressed to stop the vehicle.
The system releases the brake
when the accelerator pedal is
depressed with the shift position in
D, B
*1
or S
*2
to allow smooth start
off.
*1
: Vehicles without paddle shift
switches
*2
: Vehicles with paddle shift switches
Enabling the system
A
B
195
4-2. Driving procedures
4
Driving
Brake Malfunction Visit Your Dealer” is
displayed on the multi-information dis-
play.
If any of the conditions above are detected
when the brake hold system is enabled, the
system will turn off and the brake hold
standby indicator light will go off. In addi-
tion, if any of the conditions are detected
while the system is holding the brake, a
warning buzzer will sound and a message
will be shown on the multi-information dis-
play. The parking brake will then be set
automatically.
■ Brake hold function
● If the brake pedal is left released for a
period of about 3 minutes after the sys-
tem has started holding the brake, the
parking brake will be set automatically. In
this case, a warning buzzer sounds and a
message is shown on the multi-informa-
tion display.
● To turn the system off while the system is
holding the brake, firmly depress the
brake pedal and press the button again.
● The brake hold function may not hold the
vehicle when the vehicle is on a steep
incline. In this situation, it may be neces-
sary for the driver to apply the brakes. A
warning buzzer will sound and the multi-
information display will inform the driver
of this situation. If a warning message is
shown on the multi-information display,
read the message and follow the instruc-
tions.
● When do not wish for the parking brake
to operate automatically, press and hold
the brake hold switch until the standby
indicator (green) turns off, and then turn
the power switch off.
■ When the parking brake is set automati-
cally while the system is holding the
brakes
Perform any of the following operations to
release the parking brake.
● Depress the accelerator pedal. (The
parking brake will not be released auto-
matically if the seat belt is not fastened.)
● Operate the parking brake switch with
the brake pedal depressed.
Make sure that the parking brake indicator
light goes off. (P.192)
■ When an inspection at your Lexus
dealer is necessary
When the brake hold standby indicator
(green) does not illuminate even when the
brake hold switch is pressed with the brake
hold system operating conditions met, the
system may be malfunctioning. Have the
vehicle inspected at your Lexus dealer.
■ If “Brake Hold Malfunction Press Brake
to Deactivate Visit Your Dealer” or
“Brake Hold Malfunction Visit Your
Dealer” is displayed on the multi-infor-
mation display
The system may be malfunctioning. Have
the vehicle inspected by your Lexus dealer.
■ Warning messages and buzzers
Warning messages and buzzers are used to
indicate a system malfunction or to inform
the driver of the need for caution. If a warn-
ing message is shown on the multi-informa-
tion display, read the message and follow
the instructions.
■ If the brake hold operated indicator
flashes
P.413
WARNING
■ When the vehicle is on a steep incline
Take care when using the brake hold sys-
tem on a steep incline, exercise caution.
The brake hold function may not hold
brakes in such situations.
Also, the system may not activate
depending on the angle of the slope.
■ When stopped on a slippery road
The system cannot stop the vehicle when
the gripping ability of the tires has been
exceeded. Do not use the system when
stopped on a slippery road.
196
4-2. Driving procedures
*
: If equipped
Press the ASC switch.
The indicator on the switch will turn on.
Press the ASC switch again to turn the
ASC system off.
Even if the indicator is illuminated, when
the driving mode (P.290) is set to Eco
drive mode or Custom mode (power/train
control is set to “ECO”), or EV drive mode
(P.182) is turned on, ASC system does
not operate.
■ Operating conditions
The ASC system operates when all of the
following conditions are met.
● EV drive mode (P.182) is turned off
● The driving mode (P.290) is set to
other than Eco drive mode or Custom
NOTICE
■ When parking the vehicle
The brake hold system is not designed
for use when parking the vehicle for a
long period of time. Turning the power
switch off while the system is holding the
brake may release the brake, which
would cause the vehicle to move. When
operating the power switch, depress the
brake pedal, shift the shift position to P
and set the parking brake.
ASC (Active Sound Con-
trol)
*
The ASC system directs certain
sounds from the front of the cabin
to the vehicle interior, and harmo-
nizes these sounds with the actual
sound of the engine and exhaust in
order to allow the driver to feel
acceleration and the state of the
engine more strongly.
Turning ASC system on
197
4-2. Driving procedures
4
Driving
mode (power/train control is set to
“ECO”)

Related Topics

Popular Owner Manuals