2019-2026 Lexus UX SUV Driving procedures -> Power (ignition) switch User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving procedures -> Power (ignition) switch for Your Lexus UX SUV First Generation (2019-2026)

177
4-2. Driving procedures
4
Driving
4-2.Driving procedures
1 Press the parking brake switch to
check that the parking brake is set.
(P.192)
Parking brake indicator will come on.
2 Firmly depress the brake pedal.
and a message will be displayed on
the multi-information display.
If it is not displayed, the hybrid system can-
not be started.
When the shift position is N, the hybrid sys-
tem cannot start. Shift the shift position to P
when starting the hybrid system. (P.185)
3 Press the power switch shortly and
firmly.
When operating the power switch, one
short, firm press is enough. It is not neces-
sary to press and hold the switch.
If the “READY” indicator turns on, the
hybrid system will operate normally.
Continue depressing the brake pedal until
the “READY” indicator is illuminated.
The hybrid system can be started from any
power switch mode.
4 Check that the “READY” indicator
is illuminated.
The vehicle cannot be driven if the
“READY” indicator is off.
■ Power switch illumination
According to the situation, the power
switch illumination operates as follows.
● When a front door is opened, or the
power switch mode is changed from
ACC or ON to OFF, the power switch
illumination illuminates dimly.
● When depressing the brake pedal with
carrying the electronic key on your per-
son, the power switch illumination illumi-
nates brightly.
● When the power switch is in ACC or
ON, the power switch illumination illumi-
nates.
■ If the hybrid system does not start
● The immobilizer system may not have
been deactivated. (P.71)
Contact your Lexus dealer.
● If a message related to start-up is shown
on the multi-information display, read the
message and follow the instructions.
● If the door is unlocked with the mechani-
cal key, the hybrid system cannot be
started using the smart access system
with push-button start. Refer to P.431 to
start the hybrid system. However, if the
electronic key is carried inside the vehi-
cle and the doors are locked (P.122),
the hybrid system can be started.
Power (ignition) switch
Performing the following opera-
tions when carrying the electronic
key on your person starts the hybrid
system or changes power switch
modes.
Starting the hybrid system
178
4-2. Driving procedures
■ When the ambient temperature is low,
such as during winter driving conditions
● When starting the hybrid system, the
flashing time of the “READY” indicator
may be long. Leave the vehicle as it is
until the “READY” indicator is steady on,
as steady means the vehicle is able to
move.
● When the hybrid battery (traction bat-
tery) is extremely cold (below approxi-
mately -22°F [-30°C]) under the
influence of the outside temperature, it
may not be possible to start the hybrid
system. In this case, try to start the hybrid
system again after the temperature of the
hybrid battery increases due to the out-
side temperature increase etc.
■ Sounds and vibrations specific to a
Hybrid Electric Vehicle
P.64
■ If the 12-volt battery is discharged
The hybrid system cannot be started using
the smart access system with push-button
start. Refer to P.432 to restart the hybrid
system.
■ Electronic key battery depletion
P.114
■ Conditions affecting operation
P.140
■ Note for the entry function
P.141
■ When “Access System with
malfunction See owner’s manual” is dis-
played on the multi-information display
The system may be malfunctioning. Have
the vehicle inspected by your Lexus dealer
immediately.
■ If the “READY” indicator does not
come on
In the event that the “READY” indicator
does not come on even after performing
the proper procedures for starting the vehi-
cle, contact your Lexus dealer immediately.
■ If the hybrid system is malfunctioning
P.69
■ Electronic key battery
P.392
■ Operation of the power switch
● If the switch is not pressed shortly and
firmly, the power switch mode may not
change or the hybrid system may not
start.
● If attempting to restart the hybrid system
immediately after turning the power
switch off, the hybrid system may not start
in some cases. After turning the power
switch off, please wait a few seconds
before restarting the hybrid system.
■ Customization
If the smart access system with push-button
start has been deactivated in a customized
setting, refer to P.430.
1 Stop the vehicle completely.
2
Set the parking brake. (P.192)
WARNING
■ When starting the hybrid system
Always start the hybrid system while sit-
ting in the driver’s seat. Do not depress
the accelerator pedal while starting the
hybrid system under any circumstances.
Doing so may cause an accident result-
ing in death or serious injury.
NOTICE
■ When starting the hybrid system
If the hybrid system becomes difficult to
start, have your vehicle checked by your
Lexus dealer immediately.
■ Symptoms indicating a malfunction
with the power switch
If the power switch seems to be operat-
ing somewhat differently than usual, such
as the switch sticking slightly, there may
be a malfunction. Contact your Lexus
dealer immediately.
Stopping the hybrid system
179
4-2. Driving procedures
4
Driving
3 Press the P position switch.
(P.185)
Check that the shift position indicator
shows P and the parking brake indicator is
illuminated.
4 Press the power switch.
The hybrid system will stop, and the meter
display will be extinguished (the shift posi-
tion indicator will be extinguished a few
seconds after the meter display).
5 Release the brake pedal and check
that “ACCESSORY” or “POWER
ON” is not shown on the meter.
■ When the shift control system malfunc-
tions
When attempting to turn the power switch
off while there is a malfunction in the shift
control system, the power switch mode may
change to ACC. In this case, ACC may be
turned off by applying the parking brake
and pressing the power switch again.
If there is a malfunction in the system, have
the vehicle inspected by your Lexus dealer
immediately.
■ Automatic hybrid system shut off fea-
ture
● The vehicle is equipped with a feature
that automatically shuts off the hybrid sys-
tem when the shift lever is in P with the
hybrid system operating for an extended
period.
● The hybrid system will automatically shut
off after approximately 1 hour if it has
been left running while the shift lever is in
P.
● The timer for the automatic hybrid system
shut off feature will reset if the brake
pedal is depressed or if the shift lever is in
a position other than P.
● After the vehicle is parked, if the door is
locked with the door lock switch
(P.122) from the inside or the mechan-
ical key from the outside, the automatic
hybrid system shut off feature will be dis-
abled. The timer for the automatic hybrid
system shut off feature will be re-enabled
if the driver’s door is opened.
■ Locking the door from outside with the
hybrid system operating
1 With the driver’s door open, pull the
driver’s door handle and insert the
mechanical key.
2 Turn the mechanical key counterclock-
wise.
3 Pull out the mechanical key and close
the door.
180
4-2. Driving procedures
Modes can be changed by pressing
the power switch with the brake pedal
released. (The mode changes each
time the switch is pressed.)
ACCESSORY
POWER ON
1
OFF
The emergency flashers can be used.
2 ACC
*
WARNING
■ Stopping the hybrid system in an
emergency
● If you want to stop the hybrid system in
an emergency while driving the vehi-
cle, press and hold the power switch
for more than 2 seconds, or press it
briefly 3 times or more in succession.
(P.402)
However, do not touch the power
switch while driving except in an emer-
gency. Turning the hybrid system off
while driving will not cause loss of
steering or braking control.
However, power assist for the steering
wheel may be lost making it difficult to
steer smoothly before stopping the
vehicle depending on the remaining
charge in the 12-volt battery or usage
conditions. In this situation, you should
pull over and stop the vehicle as soon
as it is safe to do so.
● If the power switch is operated while
the vehicle is running, a warning mes-
sage will be shown on the multi-infor-
mation display and a buzzer sounds.
● When restarting the hybrid system
after an emergency shutdown, shift the
shift lever to N and press the power
switch shortly and firmly.
■ When parking
Exhaust gases include harmful carbon
monoxide (CO), which is colorless and
odorless. Observe the following precau-
tions.
Failure to do so may cause exhaust gases
to enter the vehicle and may lead to an
accident caused by light-headedness, or
may lead to death or a serious health
hazard.
● If the vehicle is in a poorly ventilated
area or a closed area, such as a
garage, stop the hybrid system.
● Do not leave the vehicle with the
hybrid system operating for a long
time. If such a situation cannot be
avoided, park the vehicle in an open
space and ensure that exhaust fumes
do not enter the vehicle interior.
● Do not leave the hybrid system oper-
ating in an area with snow build-up, or
where it is snowing. If snowbanks build
up around the vehicle while the hybrid
system is operating, exhaust gases
may collect and enter the vehicle.
Changing power switch modes
A
B
181
4-2. Driving procedures
4
Driving
Some electrical components such as the
audio system can be used.
“ACCESSORY” will be displayed on the
meter.
3 ON
All electrical components can be used.
“POWER ON” will be displayed on the
meter.
*
: ACC mode can be enabled/disabled on
the customize menu.(P.469)
■ When ACC customization is in off
With the power switch is turned off, the
multimedia system can still be used for a
certain time until the battery saving function
starts operating.
■ Auto power off function
● If the vehicle is left in ACC or ON (the
hybrid system is not operating) for more
than 20 minutes with the shift position in
P, the power switch will automatically
turn to OFF.
● If the 12-volt battery is low with the shift
position is in P and the power switch is in
ACC or ON (the hybrid system is not
operating), a buzzer sounds and a mes-
sage will be displayed on the multi-infor-
mation display. If this continues, the
power switch is automatically turn to
OFF.
However, this function cannot entirely pre-
vent the 12-volt battery discharge. Do not
leave the vehicle with the power switch in
ACC or ON for long periods of time when
the hybrid system is not operating.
NOTICE
■ To prevent 12-volt battery discharge
● Do not leave the power switch in ACC
or ON for long periods of time without
the hybrid system on.
● If “ACCESSORY” or “POWER ON”
is displayed on the multi-information
display while the hybrid system is not
operating, the power switch is not
OFF. Exit the vehicle after turning the
power switch off.

Related Topics

Popular Owner Manuals