2019-2026 Lexus UX SUV Driving procedures -> Hybrid transmission User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving procedures -> Hybrid transmission for Your Lexus UX SUV First Generation (2019-2026)

184
4-2. Driving procedures
Vehicles without paddle shift
switches
*
: To improve fuel efficiency and reduce
noise, set the shift position in D for nor-
mal driving.
Vehicles with paddle shift switches
*1
: To improve fuel efficiency and reduce
noise, set the shift position in D for nor-
mal driving. You can choose gear range
suitable for your driving situation by
operating the paddle shift switches.
*2
: By selecting shift ranges using S mode,
you can control accelerating force and
engine braking force.
■ When driving with dynamic radar cruise
control activated
Even when performing the following
actions with the intent of enabling engine
braking, engine braking will not activate
because dynamic radar cruise control will
not be canceled.
● Vehicles with paddle shift switches:
While driving in S mode, downshifting to
5 or 4. (P.189, 190)
● When switching the driving mode to
Sport mode while driving in D position.
(P.290)
■ Restraining sudden start (Drive-Start
Control)
P.171
■ If a message about a shift operation is
shown
To prevent the shift position from being
selected incorrectly or the vehicle from
moving unexpectedly, the shift position may
be changed automatically or operating the
shift lever may be required. In this case,
change the shift position following the mes-
sages on the multi-information display.
■ After recharging/reconnecting the 12-
volt battery
P.434
Hybrid transmission
Select the shift position depending
on your purpose and situation.
Shift position purpose and func-
tions
Shift posi-
tion
Objective or function
P
Parking the vehicle/starting
the hybrid system
R Reversing
N
Neutral
(Condition in which the
power is not transmitted)
D
Normal driving
*
B
Applying engine braking or
strong braking when the
accelerator pedal has been
released on steep downward
slopes etc.
Shift posi-
tion
Objective or function
P
Parking the vehicle/starting
the hybrid system
R Reversing
N
Neutral
(Condition in which the
power is not transmitted)
D
Normal driving
*1
S
S mode driving
*2
(P.190)
Shift posi-
tion
Objective or function
185
4-2. Driving procedures
4
Driving
Vehicles without paddle shift
switches
Shift lever
Operate the shift lever gently and securely
in the direction of the arrow on the shift
position indicator.
To shift to N, slide the shift lever in the
direction of the arrow and hold it.
Release the shift lever after each shifting
operation to allow it to return to its regular
position ( ).
Shifting to B is only possible when the shift
position is in D.
When shifting from P to N, D or R, from N,
D, B or R to P, from D or B to R, or from R
to D, ensure that the brake pedal is being
depressed and the vehicle is stationary.
Shift position indicator
Meter display:
The current shift position is illuminated.
Shift lever display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
WARNING
■ When driving on slippery road sur-
faces
Do not accelerate or shift the shift posi-
tion suddenly.
Sudden changes in engine braking may
cause the vehicle to spin or skid, resulting
in an accident.
NOTICE
■ Hybrid battery (traction battery)
charge
If the shift position is in N, the hybrid bat-
tery (traction battery) will not be
charged. To help prevent the battery
from discharging, avoid leaving the N
position selected for a certain amount of
time.
■ Situations where shift control system
malfunctions are possible
If any of the following situations occur,
shift control system malfunctions are
possible. Immediately stop the vehicle in
a safe place on level ground, apply the
parking brake, and then contact your
Lexus dealer.
● When the warning message indicating
the shift control system malfunction
appears on the multi-information dis-
play. (P.420)
● The display indicates that no shift posi-
tion is selected for more than a few
seconds.
Shift position display and how to
change the shift position
A
B
186
4-2. Driving procedures
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
P position switch
Fully stop the vehicle and set the parking
brake, and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator
shows P.
Vehicles with paddle shift switches
Shift lever
Operate the shift lever gently and securely
in the direction of the arrow on the shift
position indicator.
To shift to N, slide the shift lever in the
direction of the arrow and hold it.
Release the shift lever after each shifting
operation to allow it to return to its regular
position ( ).
Shifting to S is only possible when the shift
position is in D.
When shifting from P to N, D or R, from N,
D, S or R to P, from D or S to R, or from R
to D, ensure that the brake pedal is being
depressed and the vehicle is stationary.
Shift position indicator
Meter display:
The current shift position is illuminated.
Shift lever display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
P position switch
Fully stop the vehicle and set the parking
brake, and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator
shows P.
■ Changing the shift position in each
power switch mode
● The shift position cannot be changed
when the power switch is in ACC or off.
● When the power switch is in ON, if the
“READY” indicator is not illuminated, the
shift position can only be changed to N.
● When the “READY” indicator is illumi-
nated, the shift position can be changed
from P to D, N, or R.
● When the “READY” indicator is flashing,
the shift position cannot be changed from
P to any other position, even if the shift
lever is operated. Operate the shift lever
again after the “READY” indicator
changes from flashing to illuminated.
■ Shifting the shift position from P to other
positions
● While depressing the brake pedal firmly,
operate the shift lever. If the shift lever is
operated without depressing the brake
pedal, the buzzer will sound and the shift-
ing operation will be disabled.
● When selecting the shift position, make
sure that the shift position has been
changed to the desired position by
checking the shift position indicator pro-
vided on the instrument cluster.
C
A
B
C
187
4-2. Driving procedures
4
Driving
● The shift position cannot be changed
from P to B
*1
or S
*2
directly.
*1
: Vehicles without paddle shift switches
*2
: Vehicles with paddle shift switches
■ The shift position cannot be changed
when
In the following situations, a buzzer will
sound to inform you that the shift position
cannot be changed. Use the appropriate
operation to attempt to change the shift
position again.
● When attempting to change the shift
position from P with the brake pedal not
depressed
● When attempting to change the shift
position from P with the accelerator
pedal depressed
● When attempting to change the shift
position from N while stopped or driving
at an extremely low speed with the brake
pedal not depressed
● When attempting to change the shift
position from N while stopped or driving
at an extremely low speed with the accel-
erator pedal depressed
● When attempting to change the shift
position from P or N to B
*1
or S
*2
● When the P position switch is pressed
while driving
When driving at an extremely low speed,
the shift position may change to P.
*1
: Vehicles without paddle shift switches
*2
: Vehicles with paddle shift switches
■ The shift position automatically changes
to N when
In the following situations, a buzzer will
sound to inform you that the shift position
has been changed to N. Use the appropri-
ate operation to attempt to change the shift
position again.
● When attempting to change the shift
position to R while the vehicle is moving
forward
When driving at a low speed, the shift posi-
tion may change to R.
● When attempting to change the shift
position to D while the vehicle is moving
backward
When driving at a low speed, the shift posi-
tion may change to D.
● When attempting to change the shift
position from R to B
*1
or S
*2
*1
: Vehicles without paddle shift switches
*2
: Vehicles with paddle shift switches
■ If the N shift position is selected while
driving
If the shift lever is moved to N while driving
above a certain speed, the shift position will
change to N without holding the shift lever
in the N position. In this situation, a buzzer
will sound and a message will be displayed
on the multi-information display to inform
you that the shift position has been changed
to N.
■ Automatic P position selection function
In the following situations, the shift position
is automatically changed to P.
● When pressing the power switch with the
vehicle stopped while the power switch is
in ON and the shift position is in a posi-
tion other than P (after the shift position
has been changed to P, the power switch
will turn off)
*
● If the driver’s door is opened and all of the
following conditions are met, while the
shift position is in a position other than P:
• The power switch is in ON.
• The driver is not wearing the seat belt.
• The brake pedal is not depressed.
To start off the vehicle after the shift position
is changed to P, operate the shift lever
again.
● When the vehicle is stopped after the
hybrid system has been stopped in an
emergency while driving
● When voltage of the 12-volt battery
drops while the shift position is in a posi-
tion other than P
*
: When the power switch is pressed while
driving at extremely slow speeds, such as
immediately before stopping the vehicle,
188
4-2. Driving procedures
the shift position may automatically
change to P. Make sure that the vehicle is
completely stopped before pressing the
power switch.
■ If the shift position cannot be shifted
from P
There is a possibility that the 12-volt battery
is discharged. Check the 12-volt battery in
this situation. (P.432)
■ Customization
Some functions can be customized.
(P.460)
By performing the following opera-
tions, the shift position can be held in
N until the shift position switches to
P without activating the automatic P
position selection function.
1
Operate the shift lever and change
the shift position to N when the
hybrid system is operating.
2
Return the shift lever to its regular
position ( ).
3
Operate the shift lever to N and
hold it there until the buzzer
sounds.
4
Press the power switch within 5
seconds after the buzzer sounds.
The hybrid system stops with the shift posi-
tion in N.
*
Make sure to check that the buzzer sounds
and “Holding N Push P Switch When
Done” is displayed on the multi-informa-
tion display.
In order to shift to a position other
than N, first press the P position
switch to change the shift position to
P.
Make sure to operate the shift lever
with the hybrid system is operating.
WARNING
■ For the shift lever
● Do not remove the shift lever knob or
use anything but a genuine Lexus shift
lever knob. Also, do not hang anything
on the shift lever.
Doing so could prevent the shift lever
from returning to position, causing
unexpected accidents to occur when
the vehicle is in motion.
● In order to prevent the shift position
from accidentally being changed, do
not touch the shift lever when not using
it.
■ P position switch
● Do not press the P position switch
while the vehicle is moving.
If the P position switch is pressed when
driving at very low speeds (for exam-
ple, directly before stopping the vehi-
cle), the vehicle may stop suddenly
when the shift position switches to P,
which could lead to an accident.
● In order to prevent the shift position
from accidentally being changed, do
not touch the P position switch when
not using it.
NOTICE
■ When exiting the vehicle (driver’s
seat only)
Check that the shift position indicator
shows P and that the parking brake indi-
cator is illuminated before opening the
door and exiting the vehicle.
Keeping the shift position in N
without activating the automatic
P position selection function
189
4-2. Driving procedures
4
Driving
If the hybrid system is not operating,
it may not be possible to hold the
shift position in N.
*
: To keep this state, do not operate the
power switch. If the power switch is
operated repeatedly, the power switch
will turn off after the shift position has
automatically changed to P.
P.290
To drive using temporary shift range
selection, operate the “-” or “+” paddle
shift switch when driving with the shift
position in D.
When the “-” paddle shift switch is
operated, the shift range switches to a
range that enables engine braking
force that is suitable to driving condi-
tions. When the “+” paddle shift switch
is operated, the shift range switches to
a range that is one range higher than
the current range.
Changing the shift range allows
restriction of the highest gear, prevent-
ing unnecessary upshifting and
enabling the level of engine braking
force to be selected.
1 Upshifting
2 Downshifting
The selected shift range, from D1 to D6,
will be displayed in the meter.
To return to normal D position driving, the
“+” paddle shift switch must be held down
for a period of time.
A lower shift range will provide greater
engine braking forces than a higher shift
range.
■ When the “-” paddle shift switch is oper-
ated with the shift position in D
A shift range will be automatically selected.
The highest gear of the first shift range will
be one gear lower than the gear in use
during normal D position driving.
■ Automatic deactivation of shift range
selection in the D position
Shift range selection in the D position will
be deactivated in the following situations:
● When the vehicle comes to a stop
● If the accelerator pedal is depressed for
more than a certain period of time in one
gear step
Selecting the driving mode
Selecting shift ranges in the D
position (vehicles with paddle
shift switches)
Meter dis-
play
Function
D2 - D6
A gear in the range between
D1 and the selected shift
range is automatically cho-
sen depending on vehicle
speed and driving conditions
D1 Setting the shift range at D1
190
4-2. Driving procedures
● When the shift position is shifted to a
position other than D
● When the “+” paddle shift switch is
pressed and held
■ Downshifting restriction warning
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may some-
times be restricted. In some circumstances,
downshifting may not be possible even
when the shift lever or paddle shift switch is
operated. (A buzzer will sound twice.)
To enter S mode, shift the shift position
to S. Shift ranges can be selected by
operating the shift lever or paddle shift
switches.
1 Upshifting
2 Downshifting
The selected shift range, from S1 to S6, will
be displayed in the meter.
The initial shift range in S mode is 4 or 5.
■ Shift ranges and their functions
You can choose from 6 levels of
accelerating force and engine brak-
ing force.
A lower shift range will provide
greater accelerating force and
engine braking force than a higher
shift range, and the engine revolu-
tions will also increase.
■ S mode
● When the shift range is 4 or lower, hold-
ing the shift lever toward “+” sets the shift
range to 6.
● Automatically selects a higher shift range
before the engine speed becomes too
high.
■ Downshifting restriction warning
buzzer
To help ensure safety and driving perfor-
mance, downshifting operation may some-
times be restricted. In some circumstances,
downshifting may not be possible even
when the shift lever or paddle shift switch is
operated. (A buzzer will sound twice.)
Selecting shift ranges in the S
mode (vehicles with paddle shift
switches)

Related Topics

Popular Owner Manuals