2010-2013 Mazda 3 4 Door Interior Comfort User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Interior Comfort for Your Mazda 3 4 Door Second Generation (2010-2013)

Interior Comfort  
6
Use of various features for drive comfort, including air-conditioning and audio  
system.  
Climate Control System .......................... 6-2  
Operating Tips .................................... 6-2  
Vent Operation .................................... 6-3  
Interior Equipment ............................... 6-93  
Sunvisors ........................................... 6-93  
Interior Lights ................................... 6-93  
Information Display .......................... 6-95  
Multi Information Displayí ............. 6-97  
Cup Holder ...................................... 6-107  
Bottle Holder ................................... 6-108  
Storage Compartments .................... 6-109  
Accessory Sockets ........................... 6-112  
Types of the Climate Control  
System ................................................. 6-5  
Manual Typeí .................................... 6-6  
Fully Automatic Typeí .................... 6-10  
Audio System ......................................... 6-16  
Antenna ............................................. 6-16  
Operating Tips for Audio System ..... 6-17  
Audio Set .......................................... 6-27  
Audio Control Switch Operationí .... 6-56  
AUX Mode (Auxiliary input) ........... 6-59  
Safety Certification ........................... 6-61  
Bluetooth Audio ..................................... 6-62  
Bluetooth Audioí ............................. 6-62  
Bluetooth Hands-Free ........................... 6-71  
Bluetooth Hands-Freeí .................... 6-71  
Basic Bluetooth Hands-Free  
Operation .......................................... 6-75  
Convenient Use of the Hands-Free  
System ............................................... 6-79  
Hands-Free Setting ............................ 6-85  
When Bluetooth Hands-Free Cannot be  
Used .................................................. 6-91  
Safety Certification ........................... 6-91  
Mazda Bluetooth Hands-Free Customer  
Service .............................................. 6-92  
íSome models.  
6-1  
Interior Comfort  
Climate Control System  
qNot Using for a Long Period  
Operating Tips  
Run the air conditioner about 10 minutes  
at least once a month to keep internal  
parts lubricated.  
qOperating the Climate Control  
System  
Operate the climate control system with  
the engine running.  
qCheck the Refrigerant before the  
Weather Gets Hot  
NOTE  
Have the air conditioner checked before  
the weather gets hot. Lack of refrigerant  
may make the air conditioner less  
efficient. Consult an Authorized Mazda  
Dealer for refrigerant inspection.  
To prevent the battery from being discharged,  
do not leave the fan control dial on for a long  
period of time with the ignition in ON when the  
engine is not running.  
qClearing the Air Inlet  
The air conditioner is filled with  
HFC134a (R134a), a refrigerant that will  
not damage the ozone layer.  
If the air conditioner is low on refrigerant  
or has a malfunction, consult an  
Authorized Mazda Dealer.  
Clear all obstructions such as leaves,  
snow and ice from the hood and the air  
inlet in the cowl grille to improve the  
system efficiency.  
qFoggy Windows  
qReplacement of the Cabin Air  
Filterí  
The windows may fog up easily in humid  
weather. Use the climate control system to  
defog the windows.  
If your vehicle is equipped with an air  
filter for the air conditioner, it is necessary  
to change the filter periodically as  
indicated in scheduled maintenance (page  
8-3). Consult an Authorized Mazda  
Dealer for replacement of the cabin air  
filter.  
To help defog the windows, operate the  
air conditioner to dehumidify the air.  
NOTE  
The air conditioner may be used along with the  
heater to dehumidify the air.  
qParking in Direct Sunlight  
If the vehicle has been parked in direct  
sunlight during hot weather, open the  
windows to let warm air escape, then run  
the climate control system.  
6-2  
íSome models.  
Interior Comfort  
Climate Control System  
Vent Operation  
Center Vents  
qAdjusting the Vents  
Directing airflow  
Side Vents  
To adjust the direction of airflow, move  
the adjustment knob.  
To adjust the direction of airflow, open the  
vents and rotate them left and right.  
Knob  
Push  
NOTE  
When using the air conditioner under humid  
ambient temperature conditions, the system  
may blow fog from the vents. This is not a sign  
of trouble but a result of humid air being  
suddenly cooled.  
6-3  
Interior Comfort  
Climate Control System  
qSelecting the Airflow Mode  
Dashboard Vents  
Defroster and Floor Vents  
Defroster Vents  
Dashboard and Floor Vents  
Floor Vents  
6-4  
Interior Comfort  
Climate Control System  
Types of the Climate Control System  
Manual type and fully automatic type climate control systems are explained separately.  
Check your vehicle's climate control type and read the appropriate pages.  
Manual Type ............................................................................................................ page 6-6  
Fully Automatic Type ............................................................................................ page 6-10  
6-5  
Interior Comfort  
Climate Control System  
í
Manual Type  
Mode selector dial  
Fan control dial  
Temperature control dial  
A/C switch  
Rear window defroster switch  
Air intake selector  
Some models.  
Fan control dial  
qControl Switches  
Temperature control dial  
Cold  
Hot  
This dial allows variable fan speeds.  
0―Fan off  
1―Low speed  
2―Medium low speed  
3―Medium high speed  
4―High speed  
This dial controls temperature. Turn it  
clockwise for hot and counterclockwise  
for cold.  
6-6  
íSome models.  
Interior Comfort  
Climate Control System  
Mode selector dial  
NOTE  
l
The air conditioner may not function when  
the outside temperature approaches 0 °C  
(32 °F).  
l
(U.S.A.)  
When the mode is set to  
or  
with the  
fan control dial in a position other than 0  
and the temperature control dial in the  
maximum cold position, the air intake  
selector switches to the recirculated air  
mode and the A/C turns on automatically.  
If A/C is not desired, press the A/C switch  
to turn it off.  
Turn the mode selector dial to select  
airflow mode (page 6-4).  
NOTE  
l
The mode selector dial can be set at the  
Air intake selector  
intermediate positions ( ) between each  
mode. Set the dial to an intermediate  
position if you want to slightly adjust the  
airflow amount.  
l
For example, when the mode selector dial is  
at the  
position between the  
and  
positions, airflow from the floor vent is less  
than that of the  
position.  
í
A/C switch  
This switch controls the source of air  
entering the vehicle.  
Press the  
switch to alternate  
between the outside air and recirculated  
air modes.  
It is recommended that under normal  
conditions the switch be kept in the  
outside air mode.  
Press the A/C switch to turn the air  
conditioner on. The indicator light on the  
switch will illuminate when the fan  
control dial is set at position 1, 2, 3, or 4.  
Outside air mode (indicator light  
turned off)  
Outside air is taken into the vehicle. Use  
this mode for normal ventilation and  
heating.  
Press the switch once again to turn the air  
conditioner off.  
Recirculated air mode (indicator light  
illuminated)  
Outside air is shut off. Air within the  
vehicle is recirculated.  
íSome models.  
6-7  
Interior Comfort  
Climate Control System  
qCooling (With Air Conditioner)í  
This mode can be used when driving on a  
dusty road or in similar conditions. It also  
helps to provide quicker cooling of the  
interior.  
1. Set the mode selector dial to the  
position.  
2. Set the temperature control dial to the  
cold position.  
WARNING  
Do not use the recirculated air mode in  
cold or rainy weather:  
3. Set the fan control dial to the desired  
speed.  
Using the recirculated air mode in  
cold or rainy weather is dangerous as  
it will cause the windows to fog up.  
Your vision will be hampered, which  
could lead to a serious accident.  
4. Turn on the air conditioner by pressing  
the A/C switch.  
5. Adjust the fan control dial and  
temperature control dial to maintain  
maximum comfort.  
qHeating  
CAUTION  
1. Set the mode selector dial to the  
position.  
If the air conditioner is used while  
driving up long hills or in heavy  
traffic, monitor the engine coolant  
temperature warning light to see if it  
is illuminated or flashing (page  
5-46).  
2. Set the temperature control dial to the  
hot position.  
3. Set the fan control dial to the desired  
speed.  
The air conditioner may cause engine  
overheating. If the warning light is  
illuminated or flashing, turn the air  
conditioning off (page 7-15).  
NOTE  
l
If the windshield fogs up easily, set the  
mode selector dial to the  
position.  
If cooler air is desired at face level, set the  
mode selector dial at the position and  
l
l
l
NOTE  
l
adjust the temperature control dial to  
maintain maximum comfort.  
When maximum cooling is desired, set the  
temperature control dial to the extreme cold  
position and set the air intake selector to  
the recirculated air mode, then set the fan  
control dial to position 4.  
The air to the floor is warmer than air to  
the face (except when the temperature  
control dial is set at the extreme hot or cold  
position).  
l
If warmer air is desired at floor level, set  
In the  
or  
position, the air  
the mode selector dial at the  
position  
conditioner is automatically turned on  
(however, the indicator light does not  
illuminate) and the outside air mode is  
automatically selected to defrost the  
windshield.  
and adjust the temperature control dial to  
maintain maximum comfort.  
l
The air to the floor is warmer than air to  
the face (except when the temperature  
control dial is set at the extreme hot or cold  
position).  
In the  
or  
position, the outside air  
mode cannot be changed to the recirculated  
air mode.  
6-8  
íSome models.  
Interior Comfort  
Climate Control System  
NOTE  
qVentilation  
l
For maximum defrosting, set the  
temperature control dial to the extreme hot  
position and the fan control dial to position  
4.  
1. Set the mode selector dial to the  
position.  
2. Set the air intake selector to the outside  
air mode.  
l
l
If warm air is desired at the floor, set the  
mode selector dial to the  
position.  
3. Set the temperature control dial to the  
desired position.  
In the , or position, the air  
conditioner is automatically turned on  
(however, the indicator light does not  
illuminate) and the outside air mode is  
automatically selected to defrost the  
windshield.  
4. Set the fan control dial to the desired  
speed.  
q
Windshield Defrosting and Defogging  
In the  
or  
position, the outside air  
1. Set the mode selector dial to the  
position.  
mode cannot be changed to the recirculated  
air mode.  
2. Set the temperature control dial to the  
desired position.  
qDehumidifying (With Air  
Conditioner)í  
3. Set the fan control dial to the desired  
speed.  
Operate the air conditioner in cool or cold  
weather to help defog the windshield and  
side windows.  
WARNING  
Do not defog the windshield using the  
position with the temperature  
1. Set the mode selector dial to the  
desired position.  
control set to the cold position:  
2. Set the air intake selector to the outside  
air mode.  
Using the  
position with the  
temperature control set to the cold  
position is dangerous as it will cause  
the outside of the windshield to fog  
up. Your vision will be hampered,  
which could lead to a serious  
3. Set the temperature control dial to the  
desired position.  
4. Set the fan control dial to the desired  
speed.  
accident. Set the temperature control  
to the hot or warm position when  
5. Turn on the air conditioner by pressing  
the A/C switch.  
using the  
position.  
NOTE  
One of the functions of the air conditioner is  
dehumidifying the air and, to use this function,  
the temperature does not have to be set to cold.  
Therefore, set the temperature control dial to  
the desired position (hot or cold) and turn on  
the air conditioner when you want to  
dehumidify the cabin air.  
íSome models.  
6-9  
Interior Comfort  
Climate Control System  
í
Fully Automatic Type  
Climate control information is displayed on the information display.  
Information display  
Airflow display  
Air intake display  
DUAL  
AUTO  
A/C  
Temperature setting display (passenger)  
Mode selector display  
Temperature setting display (driver)  
Driver temperature control dial  
Fan control dial  
Passenger temperature control dial  
AUTO switch  
OFF switch  
DUAL switch  
Windshield defroster switch  
Mode selector switch  
A/C switch  
Rear window defroster switch  
Air intake selector  
6-10  
íSome models.  
Interior Comfort  
Climate Control System  
Pressing the OFF switch shuts off the  
climate control system.  
qControl Switches  
AUTO switch  
Temperature control dial  
Cold  
Hot  
By pressing the AUTO switch the  
following functions will be automatically  
controlled in accordance with the selected  
set temperature:  
This dial controls temperature. Turn it  
clockwise for hot and counterclockwise  
for cold.  
l
l
When the DUAL switch is off:  
Airflow temperature  
Amount of airflow  
l
Turn the driver temperature control dial  
to control the temperature.  
When the DUAL switch is on:  
l
Selection of airflow mode  
Outside/Recirculated air selection  
Air conditioner operation  
l
l
l
Turn the driver or front passenger  
temperature control dial to control the  
temperature.  
NOTE  
AUTO switch indicator light  
l
NOTE  
When on, it indicates AUTO operation, and  
the system will function automatically.  
If any of the following dials or switches are  
operated while in AUTO control, the AUTO  
switch indicator turns off.  
The system changes to the individual operation  
mode (DUAL switch indicator light  
illuminated) by turning the front passenger  
temperature control dial even when the DUAL  
switch is off, which allows individual control  
of the set temperature for the driver and front  
passenger.  
l
l
Mode selector switch  
l
Fan control dial  
l
Windshield defroster switch  
The functions for dials and switches other  
than those operated in the above continue  
to operate in AUTO control.  
Fan control dial  
OFF switch  
Fast  
Slow  
The fan has seven speeds. The selected  
speed will be displayed.  
6-11  
Interior Comfort  
Climate Control System  
Mode selector switch  
Pressing the A/C switch while the AUTO  
switch is turned on will turn off the air  
conditioning (cooling/dehumidifying  
functions). The air conditioning can be  
turned on and off by pressing the A/C  
switch while the fan control dial is on.  
NOTE  
l
The air conditioning operates when the A/C  
switch is pressed even if the fan is off.  
l
The air conditioner may not function when  
The desired airflow mode can be selected  
(page 6-4).  
the outside temperature approaches 0 °C  
(32 °F). (Indicator light remains on even  
when system is off.)  
NOTE  
l
With the airflow mode set to the  
Air intake selector  
position and the temperature control dial  
set at a medium temperature, heated air is  
directed to the feet and a comparably lower  
air temperature will flow through the  
central, left and right vents.  
l
To set the air vent to  
, press the  
windshield defroster switch.  
l
In the  
or  
position, the air  
conditioner is automatically turned on and  
the outside air mode is automatically  
selected to defrost the windshield. In the  
Outside or recirculated air positions can  
be selected. Press the switch to select  
outside/recirculated air positions.  
Recirculated air position (indicator  
light illuminated)  
or  
position, the outside air mode  
cannot be changed to the recirculated air  
mode.  
A/C switch  
Use this position when going through  
tunnels, driving in congested traffic (high  
engine exhaust areas) or when quick  
cooling is desired.  
Outside air position (indicator light  
turned off)  
Use this position for normal conditions  
and defogging.  
6-12  
Interior Comfort  
Climate Control System  
Windshield defroster switch  
WARNING  
Do not use the  
position in cold or  
rainy weather:  
Using the  
position in cold or  
rainy weather is dangerous as it will  
cause the windows to fog up. Your  
vision will be hampered, which could  
lead to a serious accident.  
DUAL switch  
Press the switch to defrost the windshield  
and front door windows.  
NOTE  
In the  
position, the air conditioner is  
automatically turned on and the outside air  
mode is automatically selected to defrost the  
windshield. In the  
position, the outside air  
mode cannot be changed to the recirculated  
air mode.  
Use the DUAL switch to change the mode  
between the individual operation (driver  
and passenger) and interconnection  
modes.  
qOperation of Automatic Air  
Conditioning  
1. Press the AUTO switch. Selection of  
the airflow mode, air intake selector  
and amount of airflow will be  
automatically controlled.  
Individual operation mode (indicator  
light illuminated)  
The set temperature can be controlled  
individually for the driver and front  
passenger.  
Interconnection mode (indicator light  
turned off)  
The set temperature for the driver and  
front passenger is controlled  
simultaneously.  
NOTE  
is displayed on the information display  
while in the individual operation mode.  
6-13  
Interior Comfort  
Climate Control System  
2. Use the temperature control dial to  
select a desired temperature.  
Press the DUAL switch or turn the  
front passenger temperature control  
dial to control the set temperature  
individually for the driver and front  
passenger.  
q
Windshield Defrosting and Defogging  
Press the windshield defroster switch.  
In this position, the outside air position is  
automatically selected, and the air  
conditioner automatically turns on. The  
air conditioner will directly dehumidify  
the air to the front windshield and side  
windows (page 6-4). Airflow amount will  
be increased.  
To turn off the system, press the OFF  
switch.  
NOTE  
l
Setting the temperature to the maximum  
high or low will not provide the desired  
temperature at a faster rate.  
l
When selecting heat, the system will restrict  
WARNING  
airflow until it has warmed to prevent cold  
air from blowing out of the vents.  
Set the temperature control to the hot  
or warm position when defogging (  
position):  
Using the  
position with the  
temperature control set to the cold  
position is dangerous as it will cause  
the outside of the windshield to fog  
up. Your vision will be hampered,  
which could lead to a serious  
accident.  
NOTE  
Use the temperature control dial to increase  
the air flow temperature and defog the  
windshield more quickly.  
6-14  
Interior Comfort  
Climate Control System  
qSunlight/Temperature Sensor  
The fully automatic air conditioner  
function measures inside and outside  
temperatures, and sunlight. It then sets  
temperatures inside the passenger  
compartment accordingly.  
CAUTION  
Do not obstruct either sensor,  
otherwise the automatic air  
conditioner will not operate properly.  
Sunlight sensor  
Interior temperature sensor  
6-15  
Interior Comfort  
Audio System  
AM/FM Radio Antennaí  
Antenna  
The AM/FM radio antenna receives both  
AM and FM signals.  
qAntenna (4 Door)  
AM/FM Radio Antenna  
Install  
The AM/FM radio antenna receives both  
AM and FM signals.  
Remove  
The AM/FM radio antenna is in the rear  
window.  
CAUTION  
When washing the inside rear  
window, use a soft cloth dampened  
in lukewarm water, gently wiping the  
antenna lines. Use of glass cleaning  
products could damage the antenna.  
Antenna for AM/FM and Satellite  
Radio Antennaí  
Satellite Radio Antennaí  
The antenna for AM/FM and satellite  
radio antenna receives both AM and FM  
signals and SIRIUS signals.  
The satellite radio antenna receives  
SIRIUS signals.  
Install  
Remove  
qAntenna (5 Door)  
CAUTION  
Ø To prevent damage to the  
antenna, remove it before entering  
a car wash facility or passing  
beneath a low overhead clearance.  
Ø Be careful around the antenna  
when removing snow from the  
roof. Otherwise the antenna could  
be damaged.  
To remove the antenna, turn it  
counterclockwise.  
To install the antenna, turn it clockwise.  
Make sure the antenna is securely  
installed.  
6-16  
íSome models.  
Interior Comfort  
Audio System  
NOTE  
Operating Tips for Audio  
System  
When leaving your vehicle unattended, we  
recommend that you remove the antenna and  
store it inside the vehicle.  
WARNING  
Do not adjust the audio control  
switches while driving the vehicle:  
Adjusting the audio while driving the  
vehicle is dangerous as it could  
distract your attention from the  
vehicle operation which could lead to  
a serious accident. Always adjust the  
audio while the vehicle is stopped.  
Even if the audio control switches are  
equipped on the steering wheel, learn  
to use the switches without looking  
down at them so that you can keep  
your maximum attention on the road  
while driving the vehicle.  
CAUTION  
For the purposes of safe driving,  
adjust the audio volume to a level  
that allows you to hear sounds  
outside of the vehicle including car  
horns and particularly emergency  
vehicle sirens.  
NOTE  
l
To prevent the battery from being  
discharged, do not leave the audio system  
on for a long period of time when the  
engine is not running.  
l
If a cellular phone or CB radio is used in  
or near the vehicle, it could cause noise to  
occur from the audio system, however, this  
does not indicate that the system has been  
damaged.  
6-17  
Interior Comfort  
Audio System  
Signals from an FM transmitter are similar  
to beams of light because they do not  
bend around corners, but they do reflect.  
Unlike AM signals, FM signals cannot  
travel beyond the horizon. Therefore, FM  
stations cannot be received at the great  
distances possible with AM reception.  
qRadio Reception  
AM characteristics  
AM signals bend around such things as  
buildings or mountains and bounce off the  
ionosphere. Therefore, they can reach  
longer distances than FM signals. Because  
of this, two stations may sometimes be  
picked up on the same frequency at the  
same time.  
Ionosphere  
FM wave  
AM wave  
Ionosphere  
FM wave  
100—200 km (60—120 miles)  
Atmospheric conditions can also affect  
FM reception. High humidity will cause  
poor reception. However, cloudy days  
may provide better reception than clear  
days.  
Station 1  
Station 2  
FM characteristics  
An FM broadcast range is usually about  
40―50 km (25―30 miles) from the  
source. Because of extra coding needed to  
break the sound into two channels, stereo  
FM has even less range than monaural  
(non-stereo) FM.  
Multipath noise  
Since FM signals can be reflected by  
obstructions, it is possible to receive both  
the direct signal and the reflected signal at  
the same time. This causes a slight delay  
in reception and may be heard as a broken  
sound or a distortion. This problem may  
also be encountered when in close  
FM Station  
proximity to the transmitter.  
40—50km  
(25—30 miles)  
Reflected wave  
Direct  
6-18  
Interior Comfort  
Audio System  
Flutter/Skip noise  
Strong signal noise  
Signals from an FM transmitter move in  
straight lines and become weak in valleys  
between tall buildings, mountains, and  
other obstacles. When a vehicle passes  
through such an area, the reception  
conditions may change suddenly, resulting  
in annoying noise.  
This occurs very close to a transmitter  
tower. The broadcast signals are  
extremely strong, so the result is noise and  
sound breakup at the radio receiver.  
Station drift noise  
When a vehicle reaches the area of two  
strong stations broadcasting at similar  
frequencies, the original station may be  
temporarily lost and the second station  
picked up. At this time there will be some  
noise from this disturbance.  
Weak signal noise  
In suburban areas, broadcast signals  
become weak because of distance from  
the transmitter. Reception in such fringe  
areas is characterized by sound breakup.  
Station 2  
88.3 MHz  
Station 1  
88.1 MHz  
6-19  
Interior Comfort  
Audio System  
l
The CD revolves at high speed within  
the unit. Defective (cracked or badly  
bent) CDs should never be used.  
qOperating Tips for CD Player/In-  
Dash CD Changer  
Condensation phenomenon  
Immediately after turning on the heater  
when the vehicle is cold, the CD or  
optical components (prism and lens) in the  
CD player/In-dash CD changer may  
become clouded with condensation. At  
this time, the CD will eject immediately  
when placed in the unit. A clouded CD  
can be corrected simply by wiping it with  
a soft cloth. Clouded optical components  
will clear naturally in about an hour. Wait  
for normal operation to return before  
attempting to use the unit.  
l
Do not use non-conventional discs  
such as heart-shaped, octagonal discs,  
etc. The disc may not eject resulting in  
a malfunction.  
Handling the CD player/In-dash CD  
changer  
The following precautions should be  
observed.  
l
Do not spill any liquid on the audio  
system.  
l
If the memory portion of the CD is  
transparent or translucent, do not use  
the disc.  
l
Do not insert any objects, other than  
CDs, into the slot.  
Transparent  
6-20  
Interior Comfort  
Audio System  
l
l
A new CD may have rough edges on  
its inner and outer perimeters. If a disc  
with rough edges is used, proper  
setting will not be possible and the CD  
player/In-dash CD changer will not  
play the CD. In addition, the disc may  
not eject resulting in a malfunction.  
Remove the rough edges in advance by  
using a ball-point pen or pencil as  
shown below. To remove the rough  
edges, rub the side of the pen or pencil  
against the inner and outer perimeter of  
the CD.  
Use discs that have been legitimately  
produced. If illegally-copied discs such  
as pirated discs are used, the system  
may not operate properly.  
l
Be sure never to touch the signal  
surface when handling the CDs. Pick  
up a CD by grasping the outer edge or  
the edge of the hole and the outer edge.  
l
When driving over uneven surfaces,  
the sound may jump.  
l
Do not stick paper or tape on the CD.  
Avoid scratching the reverse side (the  
side without a label). The disc may not  
eject resulting in a malfunction.  
l
Dust, finger smudges, and dirt can  
decrease the amount of light reflected  
from the signal surface, thus affecting  
sound quality. If the CD should  
l
The CD player/In-dash CD changer has  
been designed to play CDs bearing the  
identification logo as shown. No other  
discs can be played.  
become soiled, gently wipe it with a  
soft cloth from the center of the CD to  
the edge.  
l
Do not use record sprays, antistatic  
agents, or household spray cleaners.  
Volatile chemicals such as benzine and  
thinner can also damage the surface of  
the CD and must not be used. Anything  
that can damage, warp, or fog plastic  
should never be used to clean CDs.  
6-21  
Interior Comfort  
Audio System  
l
l
Insert discs one by one. If two discs are  
Do not use discs with cellophane tape  
adhering, partially peeled off labels, or  
adhesive material exuding from the  
edges of the CD label. Also, do not use  
discs with a commercially-available  
CD-R label affixed. The disc may not  
eject resulting in a malfunction.  
inserted at the same time, the system  
may not operate properly.  
The CD player/In-dash CD changer  
ejects the CD if the CD is inserted  
upside down. Also dirty and/or  
defective CDs may be ejected.  
l
l
Do not insert cleaning discs in the CD  
player/In-dash CD changer.  
qOperating Tips for MP3  
l
Do not insert any disc with a peel-off  
seal affixed to it.  
This unit may not be able to play  
certain CD-R/CD-RWs made using a  
computer or music CD recorder due to  
disc characteristics, scratches,  
smudges, dirt, etc., or due to dust or  
condensation on the lens inside the  
unit.  
NOTE  
Supply of this product only conveys a license  
for private, non-commercial use and does not  
convey a license nor imply any right to use this  
product in any commercial (i.e. revenue-  
generating) real time broadcasting (terrestrial,  
satellite, cable and/or any other media),  
broadcasting/streaming via the Internet,  
intranets and/or other networks or in other  
electronic content distribution systems, such as  
pay-audio or audio-on-demand applications.  
An independent license for such use is  
required. For details, please visit  
l
l
Storing CDs in the vehicle exposed to  
direct sunlight or high temperature may  
damage the CD-R/CD-RWs, and make  
them unplayable.  
CD-R/CD-RW exceeding 700 MB  
cannot be played.  
This unit may not be able to play  
certain discs made using a computer  
due to the application (writing  
software) setting used. (For details,  
consult the store where the application  
was purchased.)  
l
http://www.mp3licensing.com.  
l
l
This audio system handles MP3 files  
that have been recorded on CD-R/CD-  
RW/CD-ROMs. Discs that have been  
recorded using the following formats  
can be played:  
l
ISO 9660 level 1  
ISO 9660 level 2  
l
It is possible that certain text data, such  
l
as titles, recorded on a CD-R/CD-RW  
may not be displayed when musical  
data (CD-DA) is playing.  
l
Joliet extended format  
Romeo extended format  
This unit handles MP3 files  
l
l
l
The period from when a CD-RW is  
conforming to the MP3 format  
containing both header frames and data  
frames.  
inserted to when it begins playing is  
longer than a normal CD or CD-R.  
Completely read the instruction manual  
l
l
This unit can play multi-session  
and cautions for CD-R/CD-RWs.  
recorded discs that have up to 40  
sessions.  
This unit can play MP3s with sampling  
l
frequencies of 16/22.05/24/32/44.1/48  
kHz.  
6-22  
Interior Comfort  
Audio System  
l
This unit can play MP3 files that have  
been recorded in bit rates of 8 kbps to  
320 kbps. Nonetheless, to insure  
enjoyment of music with consistent  
sound quality, it is recommended to use  
discs that have been recorded at a bit  
rate of 128 kbps or more.  
Folder  
No.  
: Folder : Track (File)  
01  
02  
03  
04  
3
2
4
l
If a disc has both music data (CD-DA)  
and MP3 files, playback of the two file  
types differs depending on how the  
disc was recorded.  
Packet written discs cannot be played  
on this unit.  
This unit does not play CDs recorded  
using MP3i (MP3 interactive), MP3  
PRO and RIFF MP3 formats.  
05  
l
l
06  
5
1
About folders and files  
Level1  
Level3  
l
Level2  
Level4  
The order of hierarchy for MP3 files  
and folders during playback or other  
functions is from shallow to deep. The  
arrangement and playing order of a  
recorded disc containing MP3 files is  
as follows:  
Playback may not occur in the above  
hierarchy depending on the audio unit.  
l
l
l
The folder order is automatically  
assigned and this order cannot be  
optionally set.  
Any folder without an MP3 file will be  
ignored. (It will be skipped and the  
folder number will not be displayed.)  
MP3 files not conforming to the MP3  
format containing both header frames  
and data frames will be skipped and  
not played.  
l
File number  
A numerical file number is assigned  
to each file in a folder in the order of  
hierarchy from shallow to deep.  
l
Folder number  
A numerical folder number is  
assigned to each folder in the order  
of hierarchy from shallow to deep.  
l
This unit will play MP3 files that have  
up to eight levels. However, the more  
levels a disc has, the longer it will take  
to initially start playing. It is  
NOTE  
Folders and tracks (files) within the same  
hierarchy play in the order they were written to  
the disc depending on the write software.  
recommended to record discs with two  
levels or less.  
l
A single disc with up to 512 files can  
be played and a single folder with up to  
255 files can be played.  
l
When naming an MP3 file, be sure to  
add an MP3 file extension (.mp3) after  
the file name.  
6-23  
Interior Comfort  
Audio System  
l
The maximum number of characters  
Specialized glossary  
MP3  
that can be used for file names is as  
follows. However, this unit will only  
display up to 32 characters, including  
the file extension (.mp3).  
Abbreviation for “MPEG Audio Layer 3”.  
A technical standard for audio  
compression as decided by an ISO  
(International Organization for  
Standardization) MPEG working group.  
Use of MP3 allows for audio data to be  
compressed to approximately a tenth of  
the source data size.  
Maximum number of  
characters in a file name  
(including a separator “.”  
and the three letters of the  
file extension)  
ISO9660 level 1  
ISO9660 level 2  
12*  
31*  
ISO 9660  
Joliet extended  
format  
64  
An international standard for logical  
formatting of CD-ROM files and folders.  
It is divided into three separate levels  
based on differences in file naming  
procedures, data configuration and other  
characteristics.  
Romeo extended  
format  
128  
* English one-byte characters (capitalized only) and  
underbar “_” are available.  
CAUTION  
Multi-session  
This unit can only play MP3 files that  
have an MP3 file extension (.mp3)  
attached. Do not attach an MP3 file  
extension to any other type file as it  
could cause noise to be emitted or a  
malfunction in the unit.  
A session is the complete amount of data  
recorded from the beginning to the end of  
a single period of CD-ROM, CD-R/CD-  
RW data recording. Multi-session refers to  
the existence of data from two or more  
sessions on a single disc.  
About ID3 Tag display  
Sampling  
l
This unit can only display ID3 Tag  
Refers to the process of encoding analog  
audio data at regular intervals and  
converting it to digital data. The sampling  
rate refers to the number of times a  
sample is taken in one second and is  
expressed in Hz units. Increasing the  
sampling rate improves the sound quality  
but also increases the data size.  
album, track and artist names that have  
been input using Ver.1.0/1.1/2.2/2.3  
formats. Any other data that may have  
been input cannot be displayed.  
l
This unit can only display English  
(including numerals) one-byte  
characters. Use only English (including  
numerals) one-byte characters when  
inputting ID3 tags. Two-byte characters  
and some special symbols cannot be  
displayed.  
6-24  
Interior Comfort  
Audio System  
Bit rate  
Playable WMA file specification  
Refers to the volume of data per second,  
expressed in bps (bits per second).  
Generally, the larger the number of the  
transfer bit rate when compressing an  
MP3 file, the more information regarding  
musical reproduction it carries, and  
therefore the better the sound quality.  
CD-R and CD-RW including WMA files  
can be played with this unit. Discs which  
conform to the following formats can be  
played.  
Playable WMA files are as follows:  
Item  
Content  
Windows Media  
Audio Version 7.0,  
8.0, 9.0  
Specification  
Packet writing  
A general term for the method, similar to  
that used for floppy discs or hard drives,  
of recording the required file in a single  
increment on a CD-R and similar.  
32kHz. . . . . . . 32, 40,  
48 kbps  
44.1kHz . . . . . 32, 48,  
64, 80, 96, 128, 160,  
192, 256, 320 kbps  
Sampling  
frequency  
Bit rate  
ID3 Tag  
48kHz. . . . . . . 64, 96,  
128, 160, 192 kbps  
ID3 tag is a method for storing  
VBR (Variable Bit Rate)  
Channel mode  
Supported  
information related to the music in an  
MP3 file. Information such as track, artist  
and album name can be stored. This  
content can be freely edited using ID3  
editing function software.  
Stereo/Monaural  
Title, artist name,  
album name  
WMA tag  
CAUTION  
VBR  
This unit plays files with the (.wma)  
file extension as a WMA file. Do not  
use the WMA file extension for files  
other than WMA files. It may cause  
noise or a malfunction.  
Abbreviation for Variable Bit Rate. While  
CBR (Constant Bit Rate) is generally  
used, VBR varies the bit rate for audio  
compression according to compression  
conditions and this allows for  
l
l
l
In a WMA file, the track name, artist  
name and album name are recorded  
with data called “WMA-Tag”, and the  
information can be displayed.  
WMA files which do not comply with  
the specific standard may not be played  
correctly or its file and folder name  
may not be displayed correctly.  
The file extension may not be provided  
depending on the computer operating  
system, version, software, or settings.  
In this case, add the file extension  
“.wma” to the end of the file name, and  
then write the disc.  
compression with preference given to  
sound quality.  
qOperating Tips for WMA  
WMA is short for Windows Media Audio  
and is the audio compression format used  
by Microsoft.  
Audio data can be created and stored at a  
higher compression ratio than MP3.  
* Microsoft and Windows Media are  
registered trademarks of Microsoft  
Corporation U.S. in the United States  
and other countries.  
6-25  
MEMO  
6-26  
Interior Comfort  
Audio System  
Audio Set  
Audio information is displayed on the information display.  
CD Player  
In-Dash CD Changer  
Power/Volume/Sound Controls .............................................................................. page 6-28  
Operating the Radio ............................................................................................... page 6-32  
Operating the Satellite Radio ................................................................................. page 6-34  
Operating the Compact Disc (CD) Player .............................................................. page 6-46  
Operating the In-Dash CD Changer ....................................................................... page 6-50  
Operating the Auxiliary jack .................................................................................. page 6-54  
Error Indications ..................................................................................................... page 6-55  
6-27  
Interior Comfort  
Audio System  
qPower/Volume/Sound Controls  
Power/Volume dial  
Audio control dial  
Power ON/OFF  
Audio sound adjustment  
Switch the ignition to ACC or ON.  
1. Press the audio control dial to select the  
function. The selected function will be  
indicated.  
Press the power/volume dial to turn the  
audio system on.  
Press the power/volume dial again to turn  
the audio system off.  
NOTE  
To prevent the battery from being discharged,  
do not leave the audio system on for a long  
period of time when the engine is not running.  
Volume adjustment  
To adjust the volume, turn the power/  
volume dial.  
Turn the power/volume dial to the right to  
increase volume, to the left to decrease it.  
6-28  
Interior Comfort  
Audio System  
*1 Depending on the mode selected, the  
indication changes.  
Standard audio-equipped model  
*2 Depending on the model, this  
function, may not be available.  
*1  
2. Turn the audio control dial to adjust the  
selected functions as follows:  
Standard audio-equipped model  
Indication  
Turn Left Turn Right  
Select mode  
Decrease  
bass  
Increase  
bass  
*1  
Decrease  
treble  
Increase  
treble  
Shift the Shift the  
sound to the sound to the  
*1  
front  
rear  
*1  
Shift the Shift the  
sound to the sound to the  
left  
right  
*2  
OFF  
ON  
Bose Sound System-equipped model  
OFF  
OFF  
ON  
ON  
*1  
*1  
Select mode  
*1  
*1  
*1  
*2  
6-29  
Interior Comfort  
Audio System  
Bose® Sound System-equipped model  
Select the desired ALC mode.  
Indication  
Turn Left Turn Right  
Mode  
Volume change  
OFF  
OFF  
ON  
ON  
No change  
Minimum  
Decrease  
bass  
Increase  
bass  
Decrease  
treble  
Increase  
treble  
Shift the Shift the  
sound to the sound to the  
Medium  
front  
rear  
Shift the Shift the  
sound to the sound to the  
left  
right  
OFF  
ON  
Maximum  
OFF  
OFF  
ON  
ON  
Turn the audio control dial to select ALC  
OFF or ALC LEVEL1―7 modes. The  
selected mode will be indicated.  
Select mode  
NOTE  
About 5 seconds after selecting any mode, the  
volume function will be automatically selected.  
To reset bass, treble, fade, and balance, press  
the audio control dial for 2 seconds. The unit  
will beep and “CLEAR” will be displayed.  
Automatic Level Control (ALC)  
The automatic level control is a feature  
that automatically adjusts audio volume  
and sound quality according to the vehicle  
speed.  
The volume increases in accordance with  
the increase in vehicle speed, and  
decreases as vehicle speed decreases.  
6-30  
Interior Comfort  
Audio System  
*AudioPilot® 2 (Bose® Sound System-  
equipped model)  
Welcome modeí  
The welcome mode provides the  
following presentation:  
Sound is heard when the ignition is turned  
on.  
AudioPilot® 2 automatically adjusts audio  
volume and sound quality in accordance  
with the level of noise entering the vehicle  
interior while driving. When AudioPilot®  
2 is turned on, the system automatically  
calculates the conditions for optimum  
hearing of sound which may be difficult  
to hear depending on exterior noise.  
* AudioPilot® 2 is a registered trademark  
of Bose Corporation.  
BT SETUP modeí  
Music and other audio such as voice data  
recorded on portable audio devices and  
mobile phones available on the market  
which are equipped with the Bluetooth  
transmission function can be listened to  
via wireless transmission over the  
vehicle's speakers. Using the BT SETUP  
mode, these devices can be programmed  
to the Bluetooth unit or changed. For  
details, refer to Bluetooth audio (page  
6-62).  
*Centerpoint® (Bose® Sound System-  
equipped model)  
Centerpoint® offers you the experience of  
5.1-channel surround sound in your  
vehicle even with your conventional 2-  
channel stereo CDs.  
Centerpoint® can be set on or off.  
NOTE  
l
Centerpoint® operates optimally with a 2-  
channel stereo CD. MP3 audio files can be  
played, however, MP3 audio files encoded  
with high compression may result in poor  
sound quality.  
Centerpoint® is available for 2-channel  
l
stereo audio except for AM radio/FM radio/  
SIRIUS digital satellite radio/AUX/BT  
audio.  
* Centerpoint® is a registered trademark  
of Bose Corporation.  
BEEP setting  
The beep-sound when operating the audio  
system can be set on or off.  
ILLM EFT setting (Illumination setting  
during operation)  
The audio system illumination during  
operation can be set on or off.  
íSome models.  
6-31  
Interior Comfort  
Audio System  
qOperating the Radio  
Channel preset buttons  
Channel preset buttons  
Scan button  
Band selector buttons  
Manual tuning dial  
Seek tuning buttons Auto memory button  
Radio ON  
Tuning  
Press a band selector button (  
turn the radio on.  
,
) to  
The radio has the following tuning  
methods: Manual, Seek, Scan, Preset  
channel, and Auto memory tuning. The  
easiest way to tune stations is to set them  
on preset channels.  
Band selection  
Choose AM by pressing the AM button  
(
(
) and FM by pressing the FM button  
).  
NOTE  
If the power supply is interrupted (fuse blows  
or the battery is disconnected), the preset  
channels will be erased.  
The selected mode will be indicated. If  
FM stereo is being received, “ST” will be  
displayed.  
Manual tuning  
NOTE  
Turning the manual tuning dial will  
change the frequency higher or lower.  
If the FM broadcast signal becomes weak,  
reception automatically changes from  
STEREO to MONO for reduced noise, and the  
“ST” indicator will go out.  
Seek tuning  
Pressing the seek tuning button (  
,
)
will cause the tuner to seek a higher or  
lower frequency automatically.  
6-32  
Interior Comfort  
Audio System  
NOTE  
Press and hold the auto memory button  
(
If you continue to press and hold the button,  
the frequency will continue changing without  
stopping.  
) for about 2 seconds until a beep  
sound is heard; the system will  
automatically scan and temporarily store  
up to 6 stations with the strongest  
frequencies in each selected band in that  
area.  
Scan tuning  
Press the scan button (  
) to  
automatically sample strong stations.  
Scanning stops at each station for about 5  
seconds. To hold a station, press the scan  
After scanning is completed, the station  
with the strongest frequency will be tuned  
and its frequency displayed.  
button (  
) again during this interval.  
Press and release the auto memory button  
(
Preset channel tuning  
) to recall stations from the auto-  
stored stations. One stored station will be  
selected each time; its frequency and  
channel number will be displayed.  
The 6 preset channels can be used to store  
6 AM and 12 FM stations.  
1. To set a channel first select AM, FM1,  
or FM2. Tune to the desired station.  
NOTE  
If no stations can be tuned after scanning  
operations, “A” will be displayed.  
2. Depress a channel preset button for  
about 2 seconds until a beep sound is  
heard. The preset channel number and  
station frequency will be displayed.  
The station is now held in the memory.  
3. Repeat this operation for the other  
stations and bands you want to store.  
To tune one in the memory, select AM,  
FM1, or FM2 and then press its  
channel preset button. The station  
frequency and the channel number will  
be displayed.  
NOTE  
If the power supply is interrupted (fuse blows  
or the battery is disconnected), the preset  
channels will be erased.  
Auto memory tuning  
This is especially useful when driving in  
an area where the local stations are not  
known. Additional AM/FM stations can  
be stored without disturbing the  
previously set channels.  
6-33  
Interior Comfort  
Audio System  
qOperating the Satellite Radio  
Band selector buttons  
Satellite button  
Category  
button  
Seek tuning  
buttons  
Scan button  
Display button  
Instant replay button  
Channel preset buttons  
Channel preset buttons Manual tuning dial  
Text/Electronic Serial number button  
Information display  
All operations of the satellite radio are displayed on the Information display.  
Channel number, Channel name, Category name, Artist name, Song title,  
ID code, Preset channel number, Bank number, Error signs  
6-34  
Interior Comfort  
Audio System  
NOTE  
What is satellite radio?  
This equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide  
reasonable protection against harmful  
interference in a residential installation. This  
equipment generates, uses, and can radiate  
radio frequency energy and if not installed and  
used in accordance with the instructions, may  
cause harmful interference to radio  
communications. However, there is no  
guarantee that interference will not occur in a  
particular installation. If this equipment does  
cause harmful interference to radio or  
television reception, which can be determined  
by turning the equipment off and on, the user  
is encouraged to try to correct the interference  
by one or more of the following measures:  
- Increase the separation between the  
equipment and tuner.  
SIRIUS is radio the way it was meant to  
be: More than 100 new channels of digital  
quality programming delivered to listeners  
coast to coast via satellite. That means  
channels of completely commercial-free  
music plus more channels of news, sports,  
and entertainment from names like  
CNBC, Discovery, SCI-FI Channel, A&E,  
House of Blues, E!, NPR, Speed vision  
and ESPN.  
SIRIUS is live, dynamic entertainment,  
completely focused on listeners. Every  
minute of every day of every week will be  
different. All commercial-free music  
channels are created in-house and hosted  
by DJs who know and love the music. Do  
you like Reggae? How about Classic  
Rock or New Rock? SIRIUS has an array  
of choices spanning a vast range of  
musical tastes including the hits of the  
50's, 60's, 70's, & 80's as well as Jazz,  
Country, Blues, Pop, Rap, R&B,  
- Connect the equipment into an outlet on a  
circuit different from that to which the tuner is  
connected.  
Bluegrass, Alternative, Classical, Heavy  
Metal, Dance and many others.  
From its state-of-the-art, digital  
- Consult the dealer or an experienced radio/  
TV technician for help.  
broadcasting facility in Rockefeller  
Center, New York City, SIRIUS will  
deliver the broadest, deepest mix of radio  
entertainment from coast to coast.  
SIRIUS will bring you music and  
entertainment programming that is simply  
not available on traditional radio in any  
market across the country. It's radio like  
you've never heard before.  
Sign up for SIRIUS Radio today! For  
more information, visit www.sirius.com.  
Satellite radio can be subscribed to and  
received in the United States. (Except  
Alaska and Hawaii) and Canada.  
6-35  
Interior Comfort  
Audio System  
How to subscribe to satellite radio  
Please have the following information  
ready when attempting to activate your  
service:  
Once the system is installed you must first  
subscribe to the SIRIUS Radio service to  
activate the system.  
The SIRIUS Radio service uses an ID  
code to identify your radio. This code is  
needed to subscribe to SIRIUS Radio, and  
if needed, is also used to report any  
problems should there be any in the  
future. Listeners can subscribe using any  
of the following methods:  
SIRIUS ID (ESN*)  
l
l
Valid credit card information (type,  
number, expiration date)  
When you are ready to receive the on-air  
activation signals you will be instructed  
(for activation via phone) to turn on your  
tuner, have the antenna pointed skyward,  
and to turn the manual tuning dial to  
channel 184.  
Once the signal is sent from the national  
studio it may take up to ten minutes to be  
received by your unit.  
l
Visiting SIRIUS on the web at  
www.sirius.com  
Subscribing to SIRIUS customer care,  
l
available 24 hours a day, 7 days a  
week.  
Calling 1-888-539-SIRI (7474)  
NOTE  
l
On-air activation is completed after the  
procedure, in most cases from ten seconds to  
ten minutes.  
l
E-mail at: customercare@sirius-  
radio.com  
l
Writing to: SIRIUS XM RADIO  
1221 Avenue of the Americas  
New York, NY 10020  
*ESN: Electronic Serial Number  
SIRIUS operation  
Attention: Customer Care  
Customers should have their SIRIUS  
Radio ID Electronic Serial Number (ESN)  
ready.  
All operations of the satellite radio are  
conducted by means of the audio unit.  
SIRIUS radio mode selection  
NOTE  
When the satellite button is pressed during  
ACC ON, it will play the last SIRIUS  
channel in use before the mode was  
switched over to another mode or the  
power was turned off.  
Your ESN should have been recorded at the  
time of installation. If not, press the ESN  
button for 1.5 seconds or longer to display the  
12-digit ESN for the SIRIUS tuner.  
When the satellite button is pressed in a  
mode other than the SIRIUS mode, the  
last channel in use will be received.  
Satellite radio activation  
For activation and subscription  
information call toll-free at 1-888-539-  
SIRI (7474). A SIRIUS Customer Care  
representative will take the necessary  
information and walk you through the  
activation process. Or you can visit  
SIRIUS online at www.sirius.com.  
6-36  
Interior Comfort  
Audio System  
Every time the satellite button is pressed,  
the bank changes in the order shown  
below.  
NOTE  
Do not perform the following operation while  
“UPDATING” is displayed. Otherwise, the  
updating procedure will be cancelled.  
l
Turning off the audio power  
l
Switching to other modes  
l
Switching the ignition off  
SR1  
SR2  
SR3  
When the SIRIUS mode is switched to  
another mode, or when the power is  
turned off, the present channel which is  
being received is stored as the last  
channel.  
Channel selection  
Turning the manual tuning dial allows you  
to select the desired receiving channel.  
NOTE  
SR1, SR2 and SR3: six stations can be stored  
in each bank for convenient access to your  
favorite stations.  
l
Turn the knob clockwise: Channel Up  
Turn the knob counterclockwise:  
Channel Down  
l
Unsubscribed channel  
Operation in the initial state  
When a selected station has not been  
subscribed to, the display indicates the  
following:  
It may take some time to start up the  
equipment when it is in the initial state,  
when there is a change in the user's  
subscription condition, or when the  
SIRIUS channel map is changed.  
“UPDATING xx%” is displayed when the  
SIRIUS channel map is changed. If the  
unit is initialized or the user contract  
content is changed, “UPDATING” is  
displayed. Updating could take as long as  
three minutes depending on the  
After the channel number is displayed,  
[CALL  
(Flashes alternately) is displayed.  
888] and [539  
SIRI]  
NOTE  
When the subscription contract is canceled, all  
of the channels including channel 184 appear  
as unsubscribed.  
geographical area. When the unit is in an  
initialized state, channel 184 is displayed  
after the display indicates  
“UPDATING 100%”. If the SIRIUS  
channel map or the user contract content  
is changed, the channel prior to the  
change is displayed after “UPDATING” is  
displayed. After the initialization display,  
it may take as long as 12 seconds to  
receive channel 184.  
Invalid channel  
The display switches between [SR  
(bank number)  
(bank number)  
when a selected channel is not  
broadcasting.  
INVALID] and [SR  
CHANNEL] only  
6-37  
Interior Comfort  
Audio System  
NOTE  
3. SR  
(preset number)  
are displayed.  
(bank number)  
CH  
(channel number)]  
If the last channel selected has become  
unavailable because of a channel update the  
above indication is displayed until any button  
is pressed.  
4. Three seconds later, it returns to normal  
display. [SR (bank number) (text  
(e.g. channel name))]  
Preset channel programming  
NOTE  
(Programming with “channel number”  
display)  
Six stations can be stored in each bank, SR1,  
SR2, and SR3 for convenient access to your  
favorite stations.  
1. Select the desired channel to be  
programmed. At this point, the  
following is displayed:  
Preset channel call-up  
[SR (bank number)  
number)]  
(channel  
Press and release the channel preset  
button,  
[SR  
number)  
(bank number)  
CH  
(channel number)] appears.  
(preset  
2. Keep pressing the channel preset  
button for 1.5 seconds or more.  
When the preset button is pressed during  
text mode, its channel number is  
displayed first for three second and then  
its text is displayed.  
The programming process is complete  
after the channel number flashes. Then,  
[SR  
(bank number)] is displayed  
and a beep sound is heard at the same  
time.  
NOTE  
In the initial setting, all channels are preset to  
184.  
3. [SR  
(preset number)  
are displayed.  
(bank number)  
CH  
(channel number)]  
Category change  
(Programming with “text” display (e.g.  
channel name))  
Press the category button (UP or DOWN)  
and select the desired category.  
l
Press the category button (UP):  
Category up  
Press the category button (DOWN):  
Category down  
1. Select the desired channel to be  
programmed. At this point, the  
following is displayed:  
l
[SR (bank number)  
text (e.g. channel name))]  
(selected  
Every time the category (UP) button is  
pressed for 1.5 second or less, the  
category is changed over in the order  
shown below.  
At this time, the lowest (smallest-number)  
channel within the category indicated is  
received.  
When the highest (or lowest) category is  
reached, the category is changed over in  
the order shown below.  
2. Keep pressing the channel preset  
button for 1.5 seconds or more.  
The programming process is complete  
after the text (e.g. channel name)  
flashes. Then, [SR  
(bank number)]  
is displayed and you will hear beep  
sound at the same time.  
6-38  
Interior Comfort  
Audio System  
Highest category → Category all →  
Lowest category  
NOTE  
l
Eight characters are displayed on one  
screen.  
NOTE  
l
To display the rest of the characters of a  
While in “CATEGORY ALL” mode, all  
channels covering a category can be accessed  
(Category off condition).  
long title, press the text button (  
The display scrolls the next eight  
characters. Press the text button (  
again after the last eight characters have  
).  
)
Channel selection within a category  
been displayed to return to the beginning of  
the title.  
If category is not in “ALL” and the  
channel number is displayed, turning the  
manual tuning dial moves the channel  
number up/down in the present category.  
(Channel number display)  
l
When the display button is pressed  
while in info display mode, the mode  
changes to the channel number display  
mode.  
l
Turn the manual tuning dial clockwise:  
Channel Up  
l
Turn the manual tuning dial  
counterclockwise: Channel Down  
(Channel name display)  
l
When the display button is pressed  
NOTE  
The channel number needs to be indicated in  
the display to use manual tuning dial for this  
function.  
while in channel number display mode,  
it changes to channel name display  
mode.  
l
There are short (eight fixed characters)  
and long names for the channel name.  
The long name is displayed first, and  
Channel number, channel name,  
category, artist, song titles and info  
display  
l
three seconds later the short name is  
displayed. If there is no short name, the  
long name is displayed.  
To display the rest of the characters of  
the channel name, press the text button  
Each time the display button is pressed  
during SIRIUS reception, the display of  
the text data is changed over in the order  
shown below.  
l
(
). The display scrolls the next  
eight characters. Press the text button  
) again after the last eight  
(
Channel number  
Channel name  
characters have been displayed to  
return to the beginning of the title.  
Press the text button while the short  
name is displayed to switch the display  
to the long name.  
Three seconds after scrolling the long  
name, the display automatically returns  
to the first part of the long name. Three  
more seconds and the short name  
appears.  
l
Category  
name  
Info  
Artist name  
Song title  
l
6-39  
Interior Comfort  
Audio System  
l
l
If there is no channel name,  
“No TITLE” is displayed.  
Three seconds after scrolling the artist  
name, the display automatically return  
to display the first part of the artist's  
name.  
If there is no artist's name,  
“No ARTIST” is displayed.  
(Category name display)  
l
When the display button is pressed  
l
while in channel name display mode, it  
changes to the category name display  
mode.  
There are short (eight fixed characters)  
and long names for the category name.  
The long name is displayed first, and  
three seconds later the short name is  
displayed. If there is no short name, the  
long name is displayed.  
To display the rest of the characters of  
the category name, press the text  
(Song title display)  
l
When the display button is pressed  
l
while in artist name display mode, it  
changes to the song title display mode.  
To display the rest of the characters of  
l
l
the song title, press the text button  
(
). The display scrolls the next  
eight characters. Press the text button  
( ) again after the last eight  
l
button (  
next eight characters. Press the text  
button ( ) again after the last  
eight characters have been displayed to  
return to the beginning of the title.  
Press the text button while the short  
name is displayed to switch the display  
to the long name.  
). The display scrolls the  
characters have been displayed to  
return to the beginning of the title.  
Three more seconds after scrolling the  
song title, the display automatically  
returns to display the first part of the  
song title.  
l
l
l
If there is no song title, “No SONG” is  
displayed.  
l
Three seconds after scrolling the long  
name, the display automatically returns  
to display the first part of the long  
name. Three more seconds and the  
short name appears.  
(INFO (such as composer's name)  
display)  
l
When the display button is pressed  
while in song title display mode, it  
changes to the INFO display mode.  
To display the rest of the characters of  
l
If there is no category name,  
“No CATEGORY” is displayed.  
l
the composer's name, press the text  
(Artist name display)  
l
When the display button is pressed  
button (  
next eight characters. Press the text  
button ( ) again after the last  
eight characters have been displayed to  
return to the beginning of the title.  
Three seconds after scrolling the text,  
the display automatically returns to  
display the first part of the text.  
If there is no composer name,  
). The display scrolls the  
while in category name display mode,  
it changes to the artist name display  
mode.  
l
l
To display the rest of the characters of  
the artist's name, press the text button  
(
). The display scrolls the next  
eight characters. Press the text button  
) again after the last eight  
l
(
“No INFO” is displayed.  
characters have been displayed to  
return to the beginning of the title.  
6-40  
Interior Comfort  
Audio System  
Instant replay  
NOTE  
l
If the channel is changed, the instant replay  
buffer data is deleted.  
This function allows you to rewind and  
replay the program that you were  
previously or are currently listening to.  
Press the instant replay button ( ).  
When the seek tuning button ( ) is  
pressed (about 1.5 seconds), playback  
starts from the beginning of the current  
program.  
l
After turning on the power and switching to  
SIRIUS digital satellite radio mode, the  
instant replay mode is not available for  
several seconds after changing channels.  
Displaying the SIRIUS ID (ESN)  
When the ESN button is pressed for 1.5  
seconds or longer, a 12-digit Electronic  
Serial Number (ESN) for the SIRIUS  
tuner is displayed.  
When the seek tuning button ( ) is  
pressed twice, playback starts from the  
beginning of the previous program.  
When the seek tuning button ( ) is  
pressed for about 1.5 seconds or longer,  
the program is reversed while the button  
is being pressed.  
When the seek tuning button ( ) is  
pressed (about 1.5 seconds), playback  
starts from the beginning of the next  
program. When the seek tuning button  
(If the SIRIUS ID (ESN) for the tuner  
does not display)  
If “ESN  
FAIL” is displayed after  
pressing the ESN button for 1.5 seconds  
or longer, contact an Authorized Mazda  
Dealer.  
(
) is pressed (about 1.5 seconds) while  
Initialization of ID code  
the last program is being played, the  
instant replay mode is cancelled.  
When the seek tuning button ( ) is  
pressed for 1.5 seconds or longer, the  
program is fast-forwarded while the  
button is being pressed. When pressing  
and holding the button until the end of the  
program, the instant replay mode is  
cancelled.  
If the registered ID code is forgotten,  
return the ID code to the default [0000] by  
performing the following steps:  
Setting condition: SAT mode  
NOTE  
The scan button refers to the operation for an  
In-dash CD changer-equipped vehicle, and the  
auto memory button refers to the operation for  
a CD player-equipped vehicle.  
When the instant replay button is pressed  
again, playback is paused, or playback  
starts if it has been paused.  
(Master code input preparation)  
Instant replay (PAUSE)  
1. Press and hold the auto memory button  
or scan button, then press channel  
preset button 4. Hold both buttons  
together for 1.5 seconds.  
If the instant replay button is pressed  
while the instant replay mode is off,  
instant replay mode is turned on in a  
paused condition (PAUSE). Press the  
instant replay button again to resume  
playback from the point at which it was  
paused.  
2. “ENTER PIN” appears for three  
seconds which indicates that it is in  
code input mode.  
3. “SR1 - - - -” appears, which indicates  
that it is ready for code input.  
6-41  
Interior Comfort  
Audio System  
(Master code input)  
NOTE  
l
When a numeric value other than the  
4. Input the master code using the channel  
preset buttons 1-4.  
master code is input and the auto memory  
button or scan button is pressed, “SR1 Err”  
is displayed and then it returns to the  
“SR1 - - - -” display again.  
(The master code is already set at the  
time of factory shipment.)  
l
If an ID code is not input for ten seconds,  
“Err” is displayed and it returns to the  
former display.  
(Master code input determination)  
5. Determine the master code which has  
been input by pressing the auto  
memory button or scan button.  
l
Channel preset buttons 1, 2, 3, 4 and the  
auto memory button or scan button are  
used for inputting the ID code. Buttons 5  
and 6 cannot be used.  
6. “PIN CLEARED” appears which  
indicates that the master code input has  
been completed.  
Change of ID code  
7. The ID code is set to the default [0000]  
and the initialization process is  
completed.  
Setting condition: SAT mode  
When changing the ID code, the new ID  
code is input after the previous one is  
input first.  
NOTE  
Master code:  
NOTE  
The Master Code is used to initialize or re-  
initialize the ID code in the event that the code  
is not set to [0000] and/or the personalized ID  
code is not known. The initialization process  
resets the ID code to [0000]. The master code  
can potentially defeat the intent of the security  
of the parental lock if it is located by persons  
not authorized by the owner to access certain  
channels.  
The scan button refers to the operation for an  
In-dash CD changer-equipped vehicle, and the  
auto memory button refers to the operation for  
a CD player-equipped vehicle.  
(Registered ID code input)  
1. Press and hold the auto memory button  
or scan button, then press channel  
preset button 5. Hold both buttons  
together for 1.5 seconds.  
SIRIUS Satellite Radio Master Code: [0913]  
2. “ENTER PIN” appears for three  
seconds which indicates that it is in  
code input mode.  
3. “SR1 - - - -” appears, which indicates  
that it is ready for code input.  
6-42  
Interior Comfort  
Audio System  
4. Input the registered ID code using  
channel preset buttons 1-4.  
(New ID code input determination)  
10. Determine the new ID code which  
has been input by pressing the auto  
memory button or scan button.  
Example: When the registered ID code  
is “2323”, input “2323”. At this time  
“SR1 2323” is displayed.  
Press 1 for the first digit, 2 for the  
second, 3 for the third, and 4 for the  
last digit. For example, if your number  
is 2323, press 1 three times (includes  
0), 2 four times, 3 three times, and 4  
four times. If the display goes off while  
inputting, begin from Step 1.  
11. “PIN CHANGED” appears for three  
seconds which indicates that the new  
ID code input has been completed.  
12. It returns to the former display.  
NOTE  
l
If an ID code is not input for ten seconds,  
“Err” is displayed and it returns to the  
NOTE  
former display.  
The registered ID code is the default [0000] at  
the time of factory shipment. If [0000] results  
in “Err” on the display, go to the  
“INITIALIZATION OF ID CODE” section to  
reset to [0000].  
l
Channel preset buttons 1, 2, 3, 4 and the  
auto memory button or scan button are  
used for input of the ID code. Buttons 5 and  
6 cannot be used.  
Individual channel locking  
(Verification with the registered ID  
code)  
If a channel is locked, the channel is  
muted.  
5. Determine the input code by pressing  
the auto memory button or scan button.  
NOTE  
l
If the registered ID code is forgotten, return  
6. If it does not match with the previously  
registered code, “SR1 Err” is displayed  
and then it returns to “SR1 - - - -”.  
the ID code to the default [0000]. (See  
“INTIALIZATION OF ID CODE” section)  
The scan button refers to the operation for  
l
an In-dash CD changer-equipped vehicle,  
and the auto memory button refers to the  
operation for a CD player-equipped  
vehicle.  
7. If it matches with the previously  
registered code, “ENTER PIN” appears  
again and it switches to code input  
mode.  
8. “SR1 - - - -” appears, and it is ready for  
input of the new ID code.  
(Locking a channel)  
1. Select a channel to be locked by  
turning the manual tuning dial.  
Example: Select channel 100  
(New ID code input)  
9. Input the new ID code using channel  
preset buttons 1-4.  
(Registered ID code input preparation)  
Example: If “1234” is input as the new  
code, “SR1 1234” is displayed.  
2. Press and hold the auto memory button  
or scan button, then press channel  
preset button 6. Hold both buttons  
together for 1.5 seconds.  
6-43  
Interior Comfort  
Audio System  
3. “ENTER PIN” appears for three  
seconds which indicates that it is in  
code input mode.  
NOTE  
The scan button refers to the operation for an  
In-dash CD changer-equipped vehicle, and the  
auto memory button refers to the operation for  
a CD player-equipped vehicle.  
4. “SR1 - - - -” appears which indicates  
that it is ready for code input.  
(Releasing a locked channel)  
(Registered ID code input)  
1. Select a channel to be released by  
turning the manual tuning dial.  
Example: Select the locked channel  
(i.e. 100). At this time,  
5. Input the registered ID code using  
channel preset buttons 1-4. Example: If  
the registered ID code is “2323”, input  
“2323”. At this time “SR1 2323” is  
displayed.  
“SR1 LOCK 100” is displayed.  
(Registered ID code input preparation)  
(Registered ID code input  
determination)  
2. Press and hold the auto memory button  
or scan button, then press channel  
preset button 6. Hold both buttons  
together for 1.5 seconds.  
6. Determine the code which has been  
input by pressing the auto memory  
button or scan button.  
3. “ENTER PIN” appears for three  
seconds which indicates that it is in  
code input mode.  
7. If it does not match the registered code,  
“SR1 Err” is displayed and then it  
returns to “SR1 - - - -”.  
4. “SR1 - - - -” appears, which indicates  
that it is ready for code input.  
8. If it matches the registered code,  
“SR1 LOCK” appears for three  
seconds which indicates that the code  
input has been completed.  
(Registered ID code input)  
5. Input the registered ID code using  
channel preset buttons 1-4. Example:  
When the registered ID code is “2323”,  
input “2323”. At this time “SR1 2323”  
is displayed.  
9. “SR1 LOCK 100” appears which  
indicates that the parental lock is  
activated. At this time, mute is on and  
no sound is heard.  
NOTE  
l
NOTE  
If an ID code is not input for ten seconds,  
If “Err” is displayed, go to the  
“INITIALIZATION OF ID CODE” section to  
reset the ID code to [0000].  
“Err” is displayed and it returns to the  
former display.  
l
Channel preset buttons 1, 2, 3, 4 and the  
auto memory button or scan button are  
used for input of the ID code. Buttons 5 and  
6 cannot be used.  
(Registered ID code input  
determination)  
6. Determine the input code by pressing  
the auto memory button or scan button.  
Lock cancellation  
Setting condition: SAT mode  
6-44  
Interior Comfort  
Audio System  
7. If it does not match the registered code,  
“SR1 Err” is displayed and then it  
returns to “SR1 - - - -”.  
8. If it matches the registered code,  
“SR1 UNLOCK” appears for three  
seconds which indicates that the code  
input has been completed.  
9. “SR1 100” appears which indicates that  
the parental lock is off. At this time,  
sound is heard.  
NOTE  
l
If an ID code is not input for ten seconds,  
“Err” is displayed and it returns to the  
former display.  
l
Channel preset buttons 1, 2, 3, 4 and the  
auto memory button or scan button are  
used for input of the ID code. Buttons 5 and  
6 cannot be used.  
6-45  
Interior Comfort  
Audio System  
qOperating the Compact Disc (CD) Player  
Load button  
CD slot  
CD play button  
CD eject button  
Folder  
down button  
Track up/Fast-  
forward button  
Folder up  
button  
Repeat button  
Random button  
Play/Pause button  
Display button  
Track down/Reverse button  
Scan button  
Text button  
Type  
Playable data  
Ejecting the CD  
Music/MP3/WMA CD · Music data (CD-DA)  
player  
Press the CD eject button ( ) to eject the  
CD.  
· MP3/WMA file  
NOTE  
Playback  
If a disc has both music data (CD-DA) and  
MP3/WMA files, playback of the two or three  
file types differs depending on how the disc  
was recorded.  
Press the CD play button ( ) to start  
play when a CD is in the unit.  
If a CD is not in the unit when the CD  
play button ( ) is pressed, “NO DISC”  
will flash on and off.  
Inserting the CD  
Insert the CD into the slot, label-side up.  
The auto-loading mechanism will set the  
CD and begin play.  
NOTE  
When the load button (  
) is pressed, the  
CD will load and play even if the CD eject  
button ( ) had been previously pressed.  
NOTE  
There will be a short lapse before play begins  
while the player reads the digital signals on  
the CD.  
Pause  
To stop playback, press the Play/Pause  
button ( ).  
Press the button again to resume  
playback.  
6-46  
Interior Comfort  
Audio System  
Fast-forward/Reverse  
2. Press the button again to cancel the  
repeat playback.  
Press and hold the fast-forward button  
( ) to advance through a track at high  
speed.  
Press and hold the reverse button ( ) to  
reverse through a track at high speed.  
During MP3/WMA CD playback  
(Track repeat)  
1. Press the repeat button (  
) during  
playback to play the current track  
repeatedly. “TRACK RPT” is  
displayed.  
Track search  
Press the track up button ( ) or turn the  
file dial clockwise once to skip forward to  
the beginning of the next track.  
Press the track down button ( ) or turn  
the file dial counterclockwise once to skip  
back to the beginning of the current track.  
2. To cancel the repeat playback, press the  
button again after 3 seconds.  
(Folder repeat)  
1. Press the repeat button (  
) during  
Folder search (during MP3/WMA CD  
playback)  
playback, and then press the button  
again within 3 seconds to play the  
tracks in the current folder repeatedly.  
“FOLDER RPT” is displayed.  
To change to the previous folder, press the  
folder down button ( ), or press the  
folder up button ( ) to advance to the  
next folder.  
2. Press the button again to cancel the  
repeat playback.  
Music scan  
Random playback  
This feature helps to find a program by  
playing about the first 10 seconds of each  
track.  
Tracks are randomly selected and played.  
During music CD playback  
1. Press the random button ( ) during  
playback to play the tracks on the CD  
randomly. “RDM” is displayed.  
Press the scan button (  
playback to start the scan play operation  
(the track number will flash).  
) during  
Press the scan button (  
cancel scan playback.  
) again to  
2. Press the button again to cancel the  
random playback.  
NOTE  
If the unit is left in scan, normal playback will  
resume where scan was selected.  
During MP3/WMA CD playback  
(Folder random)  
1. Press the random button (  
) during  
Repeat playback  
playback to play the tracks in the folder  
randomly. “FOLDER RDM” is  
displayed.  
During music CD playback  
1. Press the repeat button (  
playback to play the current track  
) during  
2. To cancel the random playback, press  
the button again after 3 seconds.  
repeatedly. “RPT” is displayed.  
6-47  
Interior Comfort  
Audio System  
(CD random)  
MP3/WMA CD  
1. Press the random button (  
) during  
File number/Elapsed time  
playback, and then press the button  
again within 3 seconds to play the  
tracks on the CD randomly.  
“DISC RDM” is displayed.  
Folder number/File number  
File name  
2. Press the button again to cancel the  
random playback.  
Switching the display  
For files with a file name or other name  
that have been input, the display changes  
in the order of the file names or other  
names each time the display button (  
is pressed during playback.  
Folder name  
)
Album name (ID3 Tag)  
Song name (ID3 Tag)  
Artist name (ID3 Tag)  
Music CD  
Track number/Elapsed time  
Track name*  
Album name*  
Artist name*  
NOTE  
(MP3/WMA CD)  
This unit can only read English (including  
numerals) one-byte characters. Depending on  
the CD writing software used, proper display  
may not be possible.  
*Depending on the CD, this information  
may not be available.  
Display scroll  
Only 12 characters can be displayed at  
one time. To display the rest of the  
characters of a long title, press the text  
button (  
next 12 characters. Press the text button  
) again after the last 12 characters  
). The display scrolls the  
(
have been displayed to return to the  
beginning of the title.  
NOTE  
The displayable number of characters is  
limited. If the number of characters, including  
the file extension (.mp3/.wma), exceeds 32  
characters, it may not be fully displayed.  
6-48  
Interior Comfort  
Audio System  
Message display  
If “CHECK CD” is displayed, it means  
that there is some CD malfunction. Check  
the CD for damage, dirt, or smudges, and  
then properly reinsert. If the message  
appears again, take the unit to an  
Authorized Mazda Dealer for service.  
6-49  
Interior Comfort  
Audio System  
qOperating the In-Dash CD Changer  
Load button  
Disc up button  
CD slot  
Disc down button CD play button  
CD eject button  
Folder down  
button  
Random  
button  
Repeat  
button  
Folder up  
button  
Play/Pause button  
Track up/Fast-forward button  
Channel preset buttons  
Display button  
Scan button  
Text button Channel preset buttons  
Track down/Reverse button  
Type  
Playable data  
NOTE  
The CD will begin playback automatically  
after insertion. A CD cannot be inserted while  
the display reads “WAIT”. A beeping sound  
can be heard during this waiting time.  
There will be a short lapse before play begins  
while the player reads the digital signals on  
the CD.  
Music/MP3/WMA CD · Music data (CD-DA)  
player  
· MP3/WMA file  
NOTE  
If a disc has both music data (CD-DA) and  
MP3/WMA files, playback of the two or three  
file types differs depending on how the disc  
was recorded.  
Normal insertion  
Inserting the CD  
1. Press the load button (  
).  
The CD must be label-side up when  
inserting. The auto-loading mechanism  
will set the CD and begin play.  
2. When “IN” is displayed, insert the CD.  
Inserting CDs into desired tray number  
1. Press and hold the load button (  
)
for about 2 seconds until a beep sound  
is heard.  
6-50  
Interior Comfort  
Audio System  
2. Press the channel preset button for the  
desired tray number while “WAIT” is  
displayed.  
Ejecting CDs from desired tray number  
1. Press and hold the CD eject button (  
for about 2 seconds until a beep sound  
is heard.  
)
3. When “IN” is displayed, insert the CD.  
The “DISC OUT” display flashes.  
NOTE  
The CD cannot be inserted to the desired tray  
number if the number is already occupied.  
2. Press the channel preset button for the  
desired CD number for less than 5  
seconds after the beep sound is heard.  
Multiple insertion  
3. Pull out the CD.  
1. Press and hold the load button (  
)
Multiple ejection  
for about 2 seconds until a beep sound  
is heard.  
1. Press and hold the CD eject button (  
for about 2 seconds until a beep sound  
is heard.  
)
2. When “IN” is displayed, insert the CD.  
3. When “IN” is displayed again, insert  
the next CD.  
The “DISC OUT” display flashes.  
2. Press the CD eject button ( ) again  
for less than 5 seconds after the beep  
sound is heard.  
NOTE  
The first-inserted CD will be played  
automatically when:  
l
NOTE  
No other CD is inserted within 15 seconds  
If the button is not pressed and about 5  
seconds have elapsed while “DISC OUT” is  
flashing, CDs are automatically ejected.  
after “IN” is displayed.  
l
The CD trays are full.  
Displaying the CD-inserted tray  
number  
3. Pull out the CD, then the next CD will  
be ejected.  
When you want to know the number for a  
CD-inserted tray, press the display button  
( ). The tray number will be displayed  
for 5 seconds.  
NOTE  
l
CDs will be ejected starting with the one  
with the lowest number.  
l
All CDs in the tray will be ejected  
Ejecting the CD  
Normal ejection  
continuously.  
l
CDs can be ejected when the ignition is  
switched off. Press and hold the CD eject  
button ( ) for about 2 seconds and all  
CDs will eject.  
1. Press the CD eject button ( ). The  
disc number and “DISC OUT” will be  
displayed.  
Playback  
2. Pull out the CD.  
Press the CD play button ( ) to start  
play when a CD is in the unit.  
If a CD is not in the unit when the CD  
play button ( ) is pressed, “NO DISC”  
will flash on and off.  
NOTE  
When the CD is ejected during play, the next  
CD will be played automatically.  
6-51  
Interior Comfort  
Audio System  
Pause  
NOTE  
If the unit is left in scan, normal playback will  
resume where scan was selected.  
To stop playback, press the Play/Pause  
button ( ).  
Press the button again to resume  
playback.  
Repeat playback  
During music CD playback  
Fast-forward/Reverse  
1. Press the repeat button (  
playback to play the current track  
) during  
Press and hold the fast-forward button  
( ) to advance through a track at high  
speed.  
repeatedly. “RPT” is displayed.  
Press and hold the reverse button ( ) to  
reverse through a track at high speed.  
2. Press the button again to cancel the  
repeat playback.  
Track search  
During MP3/WMA CD playback  
(Track repeat)  
Press the track up button ( ) or turn the  
file dial clockwise once to skip forward to  
the beginning of the next track.  
1. Press the repeat button (  
) during  
playback to play the current track  
repeatedly. “TRACK RPT” is  
displayed.  
Press the track down button ( ) or turn  
the file dial counterclockwise once to skip  
back to the beginning of the current track.  
2. To cancel the repeat playback, press the  
button again after 3 seconds.  
Disc search  
To change the disc, press the DISC button  
(
or ) during playback.  
(Folder repeat)  
Folder search (during MP3/WMA CD  
playback)  
1. Press the repeat button (  
) during  
playback, and then press the button  
again within 3 seconds to play the  
tracks in the current folder repeatedly.  
“FOLDER RPT” is displayed.  
To change to the previous folder, press the  
folder down button ( ), or press the  
folder up button ( ) to advance to the  
next folder.  
2. Press the button again to cancel the  
repeat playback.  
Music scan  
Random playback  
This feature helps to find a program by  
playing about the first 10 seconds of each  
track.  
Tracks are randomly selected and played.  
During music CD playback  
Press the scan button (  
playback to start the scan play operation  
(the track number will flash).  
Press the scan button (  
cancel scan playback.  
) during  
1. Press the random button ( ) during  
playback to play the tracks in the CD  
randomly. “RDM” is displayed.  
) again to  
2. Press the button again to cancel the  
random playback.  
6-52  
Interior Comfort  
Audio System  
During MP3/WMA CD playback  
(Folder random)  
MP3/WMA CD  
1. Press the random button (  
playback to play the tracks in the folder  
randomly. “FOLDER RDM” is  
displayed.  
) during  
Disc number/File  
number/Elapsed time  
Disc tray number  
2. To cancel the random playback, press  
the button again after 3 seconds.  
Disc number/Folder  
number/File number  
(CD random)  
File name  
1. Press the random button (  
) during  
playback, and then press the button  
again within 3 seconds to play the  
tracks on the CD randomly.  
Folder name  
Album name (ID3 Tag)  
Song name (ID3 Tag)  
Artist name (ID3 Tag)  
“DISC RDM” is displayed.  
2. Press the button again to cancel the  
random playback.  
Switching the display  
For files with a file name or other name  
that have been input, the display changes  
in the order of the file names or other  
names each time the display button (  
is pressed during playback.  
NOTE  
(MP3/WMA CD)  
)
This unit can only read English (including  
numerals) one-byte characters. Depending on  
the CD writing software used, proper display  
may not be possible.  
Music CD  
Disc number/Track  
number/Elapsed time  
Display scroll  
Disc tray number  
Track name*  
Only 12 characters can be displayed at  
one time. To display the rest of the  
characters of a long title, press the text  
Album name*  
button (  
next 12 characters. Press the text button  
) again after the last 12 characters  
). The display scrolls the  
Artist name*  
(
have been displayed to return to the  
beginning of the title.  
*Depending on the CD, this information  
may not be available.  
NOTE  
The displayable number of characters is  
limited. If the number of characters, including  
the file extension (.mp3/.wma), exceeds 32  
characters, it may not be fully displayed.  
6-53  
Interior Comfort  
Audio System  
Message display  
If “CHECK CD” is displayed, it means  
that there is some CD malfunction. Check  
the CD for damage, dirt, or smudges, and  
then properly reinsert. If the message  
appears again, take the unit to an  
Authorized Mazda Dealer for service.  
qOperating the Auxiliary jack  
You can connect portable audio units or  
similar products on the market to the  
auxiliary jack to listen to music or audio  
over the vehicle's speakers, refer to  
Auxiliary Input (page 6-59).  
6-54  
Interior Comfort  
Audio System  
qError Indications  
If you see an error indication on the display, find the cause in the chart. If you cannot clear  
the error indication, take the vehicle to an Authorized Mazda Dealer.  
Indication  
Cause  
Solution  
Depending on the  
surrounding conditions  
(such as large trees, build-  
ings, or tunnels) and special  
weather conditions,  
SIRIUS radio reception  
may be diminished or  
temporarily interrupted.  
Improve reception by moving away from possible  
obstructions. If the error indication continues to display,  
consult an Authorized Mazda Dealer.  
ACQUIRING  
Check the satellite radio antenna, antenna cable and  
DLP antenna connector. If the error indication continues  
to display, consult an Authorized Mazda Dealer.  
Satellite radio antenna  
malfunction  
ANTENNA FAIL  
CHECK CD  
Insert the CD properly. If the error indication continues  
to display, consult an Authorized Mazda Dealer.  
CD is inserted upside down  
CD is defective  
Insert another CD properly. If the error indication  
continues to display, consult an Authorized Mazda  
Dealer.  
NOTE  
If a broken DLP* unit is replaced with a new unit, cancel the license for the broken unit and make  
sure to carry out new registration for the replaced unit. If the license for the broken unit is not  
canceled, you will be charged a reception fee for both units.  
* DLP: Down Link Processor (SATELLITE RADIO Module)  
6-55  
Interior Comfort  
Audio System  
NOTE  
l
Audio Control Switch  
Operationí  
The talk button, pick-up button, and hang-  
up button are operable with the audio unit  
turned off.  
When the audio unit is turned on,  
operation of the audio unit from the  
steering wheel is possible.  
l
Mazda has installed this system to prevent  
distraction while driving the vehicle and  
using audio controls on the dashboard.  
Always make safe driving your first priority.  
NOTE  
Because the audio unit will be turned off under  
the following conditions, the switches will be  
inoperable.  
qAdjusting the Volume  
To increase the volume, pull up the  
volume switch.  
l
When the ignition is turned off (LOCK).  
l
When the power button on the audio unit is  
pressed and the audio unit is turned off.  
To decrease the volume, press down the  
volume switch.  
Without Bluetooth Hands-Free  
Without Bluetooth Hands-Free  
With Bluetooth Hands-Free  
With Bluetooth Hands-Free  
Talk button  
Pick-up button  
Hang-up button  
6-56  
íSome models.  
Interior Comfort  
Audio System  
NOTE  
qChanging the Source  
CD, CD changer, SIRIUS digital satellite  
radio, and BT audio modes cannot be selected  
in the following cases:  
Press the mode switch (  
) to change  
the audio source (FM1 radio → FM2  
radio → AM radio → CD player or CD  
changer → SIRIUS1 → SIRIUS2 →  
SIRIUS3 → AUX → BT audio →  
cyclical).  
· SIRIUS digital satellite radio unit, or BT  
audio unit is not equipped on the audio  
system.  
· CD has not been inserted.  
Without Bluetooth Hands-Free  
The AUX mode is locked out unless you  
connect a commercially available portable  
audio unit to the auxiliary jack. Connect a  
portable audio unit or similar product on the  
market to the auxiliary jack to listen to music  
or audio over the vehicle's speakers. Change  
the audio source to AUX mode (page 6-59).  
qSeek Switch  
Without Bluetooth Hands-Free  
With Bluetooth Hands-Free  
With Bluetooth Hands-Free  
6-57  
Interior Comfort  
Audio System  
When listening to the radio or SIRIUS  
digital satellite radio  
Without Bluetooth Hands-Free  
Pull up or press down the seek switch, the  
radio switches to the next/previous stored  
station in the order that it was stored  
(1―6).  
Pull up or press down the seek switch for  
about 2 seconds until a beep sound is  
heard to seek all usable stations at a  
higher or lower frequency whether  
programmed or not.  
When playing a CD or BT audio  
Pull up the seek switch to skip to the next  
track.  
Press down the seek switch to repeat the  
current track.  
Pull up or press down and hold the seek  
switch to continuously switch the tracks  
up or down.  
qMute Switchí  
Press the mute switch ( ) once to mute  
audio, press it again to resume audio  
output.  
NOTE  
If the ignition is turned off (LOCK) with the  
audio muted, the mute will be canceled.  
Therefore, when the engine is restarted, the  
audio is not muted. To mute the audio again,  
press the mute switch ( ).  
6-58  
íSome models.  
Interior Comfort  
Audio System  
NOTE  
AUX Mode (Auxiliary input)  
l
Before using the auxiliary jack, read the  
manufacturer's instructions for the product  
being connected.  
You can connect portable audio units or  
similar products on the market to the  
auxiliary jack to listen to music or audio  
over the vehicle's speakers.  
l
Use a commercially-available, non-  
impedance (3.5 ) stereo mini plug for  
connecting the portable audio unit to the  
auxiliary jack. Before using the auxiliary  
jack, read the manufacture's instructions  
for connecting a portable audio unit to the  
auxiliary jack.  
Auxiliary jack  
l
To prevent discharging of the battery, do  
not use the auxiliary input for long periods  
with the engine off or idling.  
l
l
Noise may occur depending on the product  
connected to the auxiliary jack.  
With regard to connecting a portable audio  
or similar device to a power source, use the  
battery for the device, not the accessory  
socket.  
WARNING  
Do not adjust the portable audio unit  
or a similar product while driving the  
vehicle:  
Connecting the auxiliary jack  
1. Open the console lid.  
Adjusting the portable audio unit or  
a similar product while driving the  
vehicle is dangerous as it could  
distract your attention from the  
vehicle operation which could lead to  
a serious accident. Always adjust the  
portable audio unit or a similar  
product while the vehicle is stopped.  
2. Pass the connection plug cord through  
the cutout of the console and insert the  
plug into the auxiliary jack.  
Plug  
CAUTION  
Ø Close the lid when the auxiliary  
jack is not in use to prevent  
foreign objects and liquids from  
penetrating the auxiliary jack.  
Ø Noise may occur during playback  
if the accessory socket equipped  
on the vehicle is used. (If noise  
occurs, do not use the accessory  
socket.)  
6-59  
Interior Comfort  
Audio System  
3. Press the AUX button (  
audio unit or the mode switch (  
) of the  
WARNING  
)
Do not allow the connection plug cord  
to get tangled with the parking brake  
or the shift lever:  
of the audio control switches on the  
steering wheel to change to the AUX  
mode.  
Allowing the plug cord to become  
tangled with the parking brake or  
the shift lever is dangerous as it  
could interfere with driving, resulting  
in an accident.  
Audio Unit  
Audio Control  
Switches  
CAUTION  
Do not place objects or apply force to  
the auxiliary jack with the plug  
connected.  
NOTE  
l
Insert the plug to the auxiliary jack  
NOTE  
securely.  
l
Set the volume of the portable audio unit to  
the maximum within the range that the  
sound does not become distorted, then  
adjust the volume using the power/volume  
dial of the audio unit or the up/down switch  
of the audio control switch.  
l
Insert or remove the plug with the plug  
perpendicular to the auxiliary jack hole.  
l
Insert or remove the plug by holding its  
base.  
To listen to a portable audio unit  
l
l
Use your portable audio unit for operations  
other than volume adjustment.  
1. Switch the ignition to ACC or ON.  
If the connection plug is pulled out from the  
auxiliary jack while in AUX mode, noise  
may occur.  
2. Press the power/volume dial to turn the  
audio system on.  
6-60  
Interior Comfort  
Audio System  
Safety Certification  
This CD player is made and tested to meet exacting safety standards. It meets FCC  
requirements and complies with safety performance standards of the U.S. Department of  
Health and Human Services.  
CAUTION  
Ø This CD player should not be adjusted or repaired by anyone except qualified  
service personnel.  
If servicing is required, contact an Authorized Mazda Dealer.  
Ø Use of controls or adjustments or performance of procedures other than those  
specified herein may result in hazardous laser exposure. Never operate the CD  
player with the top case of the unit removed.  
Ø Changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate this equipment.  
NOTE  
For CD player section:  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause undesired operation.  
NOTE  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses, and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation.  
6-61  
Interior Comfort  
Bluetooth Audio  
Applicable Bluetooth specification  
Ver. 2.0 or higher  
í
Bluetooth Audio  
qWhat is Bluetooth Audio?  
Audio profile  
l
A2DP (Advanced Audio Distribution  
Profile) Ver. 1.0  
AVRCP (Audio/Video Remote Control  
Profile) Ver. 1.0  
Bluetooth audio outline  
By programming portable audio devices  
equipped with the Bluetooth  
l
communication function to the vehicle's  
Bluetooth unit, you can listen to music or  
audio recorded on these audio devices  
from the vehicle's speakers. Bluetooth  
audio devices are not those you do not  
need to plug into the auxiliary jack.  
After programming, operate the audio  
system's control panel to play/stop the  
music or audio.  
A2DP is a profile which transmits only  
audio to the Bluetooth unit. If your  
Bluetooth audio device corresponds only  
to A2DP, but not AVRCP, you cannot  
operate it using the control panel of the  
vehicle's audio system. In this case, the  
Bluetooth audio device can be operated  
by controlling the device itself, the same  
as when a portable audio system without  
the Bluetooth communication function is  
connected to the AUX terminal.  
CAUTION  
Ø Always program audio devices to  
the Bluetooth audio system while  
the vehicle is stopped.  
Function  
Playback  
A2DP  
No  
A2DP·AVRCP  
Yes  
Ø Because only specified Bluetooth  
audio devices can be used, consult  
an Authorized Mazda Dealer when  
purchasing or changing devices.  
Bluetooth audio devices which  
correspond to specified Bluetooth  
versions and profiles can be  
Bluetooth-connected to the  
vehicle's Bluetooth unit, however,  
even among these devices are ones  
which cannot be Bluetooth-  
connected or have limited  
Pause  
No  
Yes  
File (Track)  
up/down  
No  
Yes  
Yes: Available  
No: Not available  
functionality. Each device to be  
used with the vehicle's Bluetooth  
unit needs to be checked  
individually for compatibility.  
Consult an Authorized Mazda  
Dealer concerning device  
Bluetooth is the registered trademark of  
Bluetooth SIG. Inc.  
compatibility.  
Phone: 800-430-0153  
Web: www.MazdaUSA.com/  
bluetooth  
6-62  
íSome models.  
Interior Comfort  
Bluetooth Audio  
NOTE  
l
qBluetooth Audio Preparation  
It may not be possible to play a Bluetooth  
Bluetooth audio device set-up  
audio device if it is placed anywhere  
transmission is compromised, such as  
inside a metal container or the trunk. Move  
the Bluetooth audio device to a location  
where transmission is possible.  
Bluetooth audio programming, changes,  
deletions, and display of programmed  
device information can be performed.  
1. The mode changes as follows each  
time the audio control dial is pressed.  
Select “BT SETUP”.  
l
Battery consumption of Bluetooth audio  
devices is higher while Bluetooth-  
connected.  
l
If a non-Bluetooth device is to be used, a  
commercially-available Bluetooth adapter  
is required. When playing an audio device  
with a Bluetooth adapter installed,  
programming of the audio device may not  
be possible or audio may not be heard from  
the vehicle speakers if the connection of the  
adapter and the device is poor. If this  
happens, check if the Bluetooth adapter is  
properly connected.  
Standard audio-equipped model  
*
*
*
*
6-63  
Interior Comfort  
Bluetooth Audio  
Display  
Mode  
Pairing  
program mode  
Function  
Bose Sound System-equipped model  
Bluetooth  
audio device  
programming  
PAIR DEVICE  
*
Changing link  
to Bluetooth  
audio device  
*
Link change  
mode  
LINK CHANGE  
PAIR DELETE  
Deleting link  
to Bluetooth  
audio device  
Pairing  
deletion mode  
Displaying  
vehicle's  
Bluetooth unit  
information  
Device  
information  
display mode  
DEVICE INFO  
3. Press the audio control dial to  
determine the mode.  
*
*
*
Bluetooth audio device programming  
Any Bluetooth audio device must be  
programmed to the vehicle's Bluetooth  
unit before it can be listened to over the  
vehicle's speakers.  
A maximum of seven devices including  
Bluetooth audio devices and hands-free  
mobile phones can be programmed to one  
vehicle.  
* Depending on the mode selected, the  
indication changes.  
2. Turn the audio control dial and select a  
desired mode.  
6-64  
Interior Comfort  
Bluetooth Audio  
NOTE  
l
2. Press the audio control dial to  
determine the mode.  
Always perform Bluetooth audio device  
programming while the vehicle is stopped.  
If a Bluetooth device has already been  
programmed to the vehicle as a hands-free  
mobile phone, it does not need to be  
programmed again when using the device  
as a Bluetooth audio device. Conversely, it  
does not need to be programmed again as a  
hands-free mobile phone if it has already  
been programmed as a Bluetooth audio  
device.  
After “ENTER PIN” is displayed on  
the information display for three  
seconds, “PIN 0000” is displayed and  
the PIN code can be input.  
l
3. Input the PIN code of your Bluetooth  
audio device by pressing channel  
preset buttons 1 to 4 while “PIN 0000”  
is displayed.  
Press channel preset button 1 to input  
the first digit, 2 for the second, 3 for  
the third, and 4 for the forth. For  
example, if the PIN code were “4213”,  
press channel preset button 1 four  
times (1, 2, 3, 4), button 2 twice (1, 2),  
button 3 once (1), and button 4 three  
times (1, 2, 3). If the “PIN 0000”  
display disappears before finishing the  
PIN code input, repeat the procedure  
from Step 1.  
l
Look around to be sure other likely  
Bluetooth audio devices are not in range  
when you start to program. If in doubt,  
move your car to another location. The  
transmission range of a Bluetooth audio  
device is about 10 m (32 ft). Therefore, if  
there is another Bluetooth audio device  
within a 10 m (32 ft) radius of the vehicle,  
the device may be identified and  
programmed instead.  
l
Device registration can also be done using  
voice recognition (page 6-75).  
NOTE  
Some devices accept only a particular pairing  
code (Usually, “0000” or “1234”).  
If pairing cannot be completed, refer to the  
owner's manual of your mobile device, and try  
those numbers if necessary.  
Concerning the operation of a Bluetooth  
audio device itself, refer to its instruction  
manual.  
Some Bluetooth audio devices have PIN  
codes (four digits). Refer to the audio  
device's instruction manual because the  
programming procedure differs depending  
on whether it has a PIN code or not.  
4. Press the audio control dial while the  
input PIN code is displayed.  
“PAIRING” flashes on the display.  
5. Operate the Bluetooth audio device and  
set it to the program mode while  
“PAIRING” is flashing.  
Programming a Bluetooth audio device  
which has a PIN code (4 digits)  
1. Using the audio control dial, select the  
pairing program mode  
6. When the programming is completed,  
“
” and “PAIR SUCCESS” are  
“PAIR DEVICE” in the “BT SETUP”  
mode. (Refer to  
“Bluetooth audio device set-up” for  
details.)  
displayed after about 10-30 seconds,  
after which “PAIR SUCCESS”  
continues to be displayed for three  
seconds, and then the unit returns to the  
normal display.  
6-65  
Interior Comfort  
Bluetooth Audio  
NOTE  
l
6. When the programming is completed,  
” and “PAIR SUCCESS” are  
Some Bluetooth audio devices need a  
“
certain amount of time before the “  
”
displayed after about 10-30 seconds,  
after which “PAIR SUCCESS”  
continues to be displayed for three  
seconds, and then the unit returns to the  
normal display.  
symbol is displayed.  
l
If the programming failed, “Err” flashes  
for three seconds.  
l
Programming cannot be performed while  
the vehicle is moving. If you attempt to  
perform programming while the vehicle is  
moving, “PAIR DISABLE” is displayed.  
If seven Bluetooth audio devices have  
already been programmed to the vehicle,  
programming cannot be performed and  
“MEMORY FULL” is displayed. Delete  
one programmed device to program  
another one.  
NOTE  
l
If pairing cannot be completed, try “1234”  
instead. Refer to the owner's manual of  
your mobile device for the right PIN code.  
Some Bluetooth audio devices need a  
l
l
certain amount of time before the “  
”
symbol is displayed.  
l
l
If the programming failed, “Err” flashes  
for three seconds.  
Programming cannot be performed while  
the vehicle is moving. If you attempt to  
perform programming while the vehicle is  
moving, “PAIR DISABLE” is displayed.  
If seven Bluetooth audio devices have  
already been programmed to the vehicle,  
programming cannot be performed and  
“MEMORY FULL” is displayed. Delete  
one programmed device to program  
another one.  
Programming a Bluetooth audio device  
which does not have a PIN code (4  
digits)  
1. Using the audio control dial, select the  
pairing program mode  
l
“PAIR DEVICE” in the “BT SETUP”  
mode. (Refer to  
“Bluetooth audio set up” for details.)  
2. Press the audio control dial to  
determine the mode.  
Changing the link to a Bluetooth audio  
device  
After “ENTER PIN” is displayed on  
the information display for three  
seconds, “PIN 0000” is displayed and  
the PIN code can be input.  
If several devices have been programmed,  
the Bluetooth unit links the device last  
programmed. If you would like to link a  
different programmed device, it is  
necessary to change the link. The order of  
device priority after the link has been  
changed is maintained even when the  
ignition is switched off (LOCK).  
3. Press the audio control dial while  
“PIN 0000” is displayed.  
“PAIRING” flashes on the display.  
4. Operate the Bluetooth audio device and  
set it to the program mode while  
“PAIRING” is flashing.  
1. Using the audio control dial, select the  
link change mode “LINK CHANGE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth audio device set-up” for  
details.)  
5. As the Bluetooth audio device requires  
a PIN code, input “0000”.  
6-66  
Interior Comfort  
Bluetooth Audio  
2. Press the audio control dial to  
determine the mode.  
6. If the link to the desired device is  
successful, the “ ” symbol is  
displayed again, together with  
“LINK CHANGED”.  
“LINK CHANGED” is displayed for  
three seconds, then it returns to the  
normal display.  
3. The name of the currently linked  
Bluetooth audio device is displayed.  
If no Bluetooth audio device is  
currently linked, the name of the first  
device among the programmed devices  
is displayed.  
NOTE  
l
Some Bluetooth audio devices need a  
certain amount of time before the “  
symbol is displayed.  
4. Turn the audio control dial to select the  
name of the device you would like to  
link.  
”
l
If a hands-free type mobile phone has been  
the most recently programmed device, the  
Bluetooth unit links this device. If you  
would like to use a Bluetooth audio type  
device which has been previously  
Device name 1  
Device name 2  
Device name 3  
programmed to the Bluetooth unit, the link  
must be changed to this device.  
l
If an error occurs while trying to link a  
device, “Err” flashes in the display for  
three seconds, and the display returns to  
“LINK CHANGE”. If this occurs, check the  
programming status of the Bluetooth audio  
device and the location of the device in the  
vehicle (not in the trunk or a metal-type  
box), and then try the link operation again.  
Device selection can also be done using  
voice recognition (page 6-85).  
Device name 4  
Device name 5  
Device name 6  
Device name 7  
l
How to confirm the device currently  
linked  
Switch to the link-change mode. (Refer to  
“Changing the link to a Bluetooth audio  
device”)  
The device name displayed first is the  
device which is currently linked.  
5. Press the audio control dial to select the  
device you would like to link.  
The “ ” symbol disappears, and  
“PAIRING” flashes in the display.  
NOTE  
When “GO BACK” is selected and the audio  
control dial is pressed, the display returns to  
“LINK CHANGE”.  
6-67  
Interior Comfort  
Bluetooth Audio  
Deleting the link to a Bluetooth audio  
device  
5. If a selection other than “GO BACK”  
is made and the audio control dial is  
pressed, “SURE ? NO” is displayed.  
1. Using the audio control dial, select the  
pairing delete mode “PAIR DELETE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth audio device set-up” for  
details.)  
6. Rotate the audio control dial clockwise  
and switch the display to “SURE ?  
YES”.  
NOTE  
2. Press the audio control dial to  
determine the mode.  
The display changes as follows depending on  
whether the audio control dial is rotated  
clockwise or counterclockwise.  
3. The name of the first device among the  
programmed devices is displayed.  
-Clockwise: “SURE ? YES” displayed  
-Counterclockwise: “SURE ? NO” displayed  
4. Rotate the audio control dial and select  
the name of the programmed device  
you would like to delete.  
7. Press the audio control dial to delete  
the selected device.  
NOTE  
Select “GO BACK” and press the audio  
control dial to return to the “PAIR DELETE”  
display.  
Device name 1  
Device name 2  
Device name 3  
8. “PAIR DELETED” is displayed for  
three seconds after the deletion is  
completed, and then it returns to the  
normal display.  
Device name 4  
Device name 5  
NOTE  
If an error occurs while trying to delete the  
programmed device, “Err” flashes in the  
display for three seconds and the display  
returns to “LINK DELETE”.  
Device name 6  
Device name 7  
Bluetooth audio device information  
display  
1. Using the audio control dial, select the  
pair device information display mode  
“DEVICE INFO” in the “BT SETUP”  
mode. (Refer to  
NOTE  
“Bluetooth audio device set-up” for  
details.)  
Only the names of programmed devices can be  
displayed. If only one device is programmed,  
only the name for this device is displayed.  
2. Press the audio control dial to  
determine the mode.  
6-68  
Interior Comfort  
Bluetooth Audio  
3. The name of the Bluetooth unit device  
is displayed.  
2. Turn on the Bluetooth audio device's  
power.  
Make sure that the “ ” symbol is  
displayed in the information display.  
The symbol is not displayed if an  
unprogrammed Bluetooth audio device  
is being used or the vehicle's Bluetooth  
unit has a malfunction.  
4. Rotate the audio control dial to select  
the information for the Bluetooth unit  
which you would like to view.  
Device name  
BT address  
NOTE  
Some Bluetooth audio devices need a certain  
amount of time before the “ ” symbol is  
displayed.  
3. Press the AUX button to switch the  
Bluetooth audio mode to “BT Audio”.  
4. The audio recorded to the Bluetooth  
audio device begins playback.  
NOTE  
NOTE  
l
When “GO BACK” is selected and the audio  
control dial is pressed, the display returns to  
“DEVICE INFO”.  
If the Bluetooth audio device does not begin  
playback, press the Play/Pause button  
(
).  
l
If the mode is switched from Bluetooth  
audio mode to another mode (radio mode),  
audio playback from the Bluetooth audio  
device stops.  
qHow to Use the Bluetooth Audio  
System  
Switching to Bluetooth audio mode  
l
If a call is received on a hands-free mobile  
phone during playback from the Bluetooth  
audio device, the playback is stopped.  
Playback from the Bluetooth audio device  
resumes after the call ends.  
To listen to music or voice audio recorded  
to a Bluetooth audio device, switch to the  
Bluetooth audio mode to operate the  
audio device using the audio system  
control panel.  
Any Bluetooth audio device must be  
programmed to the vehicle's Bluetooth  
unit before it can be used. (Refer to  
“Bluetooth audio device programming”)  
Playback  
1. To listen to a Bluetooth audio device  
over the vehicle's speaker system,  
switch the mode to Bluetooth audio  
mode. (Refer to  
1. Switch the ignition to ACC or ON.  
“Switching to Bluetooth audio mode”)  
2. To stop playback, press the Play/Pause  
button ( ).  
3. Press the button again to resume  
playback.  
6-69  
Interior Comfort  
Bluetooth Audio  
Selecting a file (track)  
Short-press the track down button ( ) or  
turn the file dial counterclockwise: Selects  
the beginning of the current file (track).  
Short-press the track up button ( ) or  
turn the file dial clockwise: Selects the  
next file (track).  
6-70  
Interior Comfort  
Bluetooth Hands-Free  
í
Bluetooth Hands-Free  
CAUTION  
The types of devices (Mobile phone)  
which can be connected to the  
hands-free unit are limited, so before  
purchasing or changing your device  
(Mobile phone) model, consult  
Mazda Bluetooth Hands-Free  
Customer Service or visit  
www.MazdaUSA.com/bluetooth for a  
complete list of compatible phones.  
Devices (Mobile phone) which can be  
connected to the hands-free system  
need to be compliant with Bluetooth  
specifications and the appropriate  
profile, however, even among these  
Bluetooth devices (Mobile phone) are  
some which will not connect with  
your Mazda or will have limited  
function. Therefore, consult Mazda  
Bluetooth Hands-Free Customer  
Service for information regarding  
device (Mobile phone) compatibility:  
Phone: 800-430-0153  
qWhat is Bluetooth Hands-Free?  
Bluetooth Hands-Free Outline  
By connecting a Bluetooth equipped  
device (Mobile phone) to the hands-free  
unit equipped on the vehicle, making and  
receiving calls are possible using the talk  
button, pick-up button and hang-up button  
located on the steering wheel, and saying  
the voice commands.  
WARNING  
Perform phonebook registration related  
operations while the vehicle is parked:  
Performing phonebook registration  
while driving the vehicle could be a  
distraction to your driving and result  
in an accident. In addition, a mistake  
in performing the phonebook  
operation could result in the loss of  
important data.  
Web: www.MazdaUSA.com/  
bluetooth  
Bluetooth equipped device (Mobile  
phone)  
Applicable Bluetooth specification  
Ver. 2.0 or higher  
Response profile  
A Bluetooth equipped device (Mobile  
phone) communicates with the hands-free  
unit equipped on the vehicle using radio  
transmission (Bluetooth).  
For example, if the device (Mobile phone)  
is placed in a coat pocket, the phone calls  
can be made through your mobile service  
without taking out and handling the  
device (Mobile phone).  
l
HFP (Hands Free Profile) Ver. 1.5  
DUN (Dial-up Networking Profile)  
l
Ver. 1.1  
PBAP (Phone Book Access Profile)  
l
Ver. 1.0  
A2DP (Advanced Audio Distribution  
l
Profile) Ver. 1.0  
AVRCP (Audio/Video Remote Control  
Profile) Ver. 1.0  
l
íSome models.  
6-71  
Interior Comfort  
Bluetooth Hands-Free  
l
OPP (Object Push Profile) Ver. 1.1  
Talk button, Pick-Up button and Hang-  
Up button  
Basic functions of Bluetooth Hands-Free  
can be used for such things as making  
calls or hanging up using the talk button,  
pick-up button and hang-up button on the  
steering wheel.  
Talk button  
Bluetooth is the registered trademark of  
Bluetooth SIG. Inc.  
Pick-up button  
Hang-up button  
NOTE  
l
The Bluetooth Hands-Free system is  
operable several seconds after the ignition  
is switched to ACC or ON (requires less  
than 15 seconds).  
l
If the ignition is switched off (LOCK)  
during a hands-free call, the line is  
transferred to the device (Mobile phone)  
automatically.  
Talk button operations  
l
If the device (Mobile phone) is in a location  
where radio reception is difficult such as a  
metal container or in the trunk, the call may  
not be connected using Bluetooth. If  
A short press or a long press of the talk  
button is used to operate the system as  
follows:  
communication is not possible, change the  
location of the device (Mobile phone).  
l
Short press (Press the button less than  
0.7 sec.)  
l
Long press (Press the button 0.7 sec. or  
more.)  
qComponent Parts  
Bluetooth Hands-Free consists of the  
following items:  
l
Talk button  
Pick-up button  
l
l
Hang-up button  
Information display  
l
l
Microphone  
Audio unit  
l
6-72  
Interior Comfort  
Bluetooth Hands-Free  
Information display  
qVoice  
When available, the information display  
shows telephone numbers, Bluetooth  
Hands-Free messages, and operation  
status.  
To prevent the deterioration in voice  
recognition rate and voice quality, the  
following points must be observed:  
l
It is not necessary to face the  
microphone or approach it. Speak the  
voice commands while maintaining a  
safe driving position.  
l
Close the windows and/or the  
moonroof to reduce loud noises from  
outside the vehicle, or turn down the  
airflow of the climate control system  
while Bluetooth Hands-Free is being  
used. Voice recognition may not  
function correctly or voice quality may  
deteriorate under the following  
conditions.  
Bluetooth phone connected  
l
A passenger is speaking.  
Driving with the window and/or the  
Microphone  
l
The microphone is used for speaking  
voice commands or exchanging  
conversation.  
moonroof open.  
Driving on bumpy roads.  
Noise outside of the vehicle is loud.  
l
l
(Construction sites, inside tunnels,  
excess oncoming traffic, or heavy  
rain.)  
l
Operation noise from turn signals,  
wipers, or the horn is heard.  
l
A/C airflow is strong or wind is  
blowing on the microphone.  
l
There is noise coming from cargo  
loaded in the vehicle.  
Voice commands may not be  
Microphone  
l
recognized depending on the voice. If  
the voice commands are not recognized  
correctly, repeat the commands in a  
louder voice, at a natural pace, as if  
speaking to another person.  
Audio unit  
The audio unit is used for adjusting the  
volume.  
l
Dialects or different wording other than  
hands-free prompts cannot be  
recognized by voice recognition. Speak  
in the wording specified by the voice  
commands.  
6-73  
Interior Comfort  
Bluetooth Hands-Free  
NOTE  
Bluetooth Hands-Free Activation  
Method  
If the voice recognition performance is not  
satisfactory, refer to “Voice Recognition  
Learning Function (Speaker Enrollment)”  
(page 6-89).  
Press the pick-up button or talk button  
with a short press.  
The hands-free system is activated.  
Functions of the hands-free telephone,  
such as making and receiving calls, can be  
used after the activation. (For details on  
the telephone functions, refer to “Basic  
Bluetooth Hands-Free Operation” or  
“Convenient Use of the Hands-Free  
System”.)  
Please be aware that the voice recognition  
may error despite following the above  
points.  
qFunction Restrictions While  
Using Bluetooth Hands-Free  
Some functions are limited while  
Bluetooth Hands-Free is being used. They  
include:  
Tutorial  
The tutorial explains how to use  
Bluetooth Hands-Free.  
To activate the tutorial, do the following:  
l
Beep sound and voice guidance related  
to the audio unit are not heard.  
l
Beep sound related to the A/C  
operation is not heard.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Tutorial”  
qHow to Use This Section  
3. Follow the prompts to receive the  
appropriate voice guidance  
instructions.  
Descriptions in the text are as follows:  
Say: Voice commands to be spoken by  
you.  
Prompt: Voice guidance output from the  
speaker.  
Cancel  
The Bluetooth Hands-Free system  
transitions to idling status if the following  
operation is performed while the system is  
activating.  
NOTE  
Say voice commands after the beep sound  
[Beep] is heard.  
Press the hang-up button, or the talk  
button with a long press.  
Example)  
Say: [Beep] “Dial”  
Prompt: “Number, please”  
Say: [Beep] “XXXXXXXXXXX (Ex.  
“555-1234”) (Telephone number)”  
NOTE  
To cancel a particular voice guidance in  
midstream and have the system perform a  
different operation, press the talk button and  
say the applicable voice command while the  
voice guidance is playing.  
6-74  
Interior Comfort  
Bluetooth Hands-Free  
NOTE  
Basic Bluetooth Hands-  
Free Operation  
Other language settings can also be made  
while in the current setting by saying the name  
of the language in the native pronunciation.  
q
Bluetooth Hands-Free Preparation  
7. Prompt: “French (Desired language)  
selected. Is this correct?”  
Language setting  
The available languages are English,  
Spanish, and Canadian French. If the  
language setting is changed, all of the  
voice guidance and voice input  
commands are done in the selected  
language.  
8. Say: [Beep] “Yes”  
9. Prompt: “French (Desired language)  
selected, returning to main menu”  
(Spoken in the newly selected  
language).  
NOTE  
l
Method 2  
If the language setting is changed, device  
1. Press the pick-up button or talk button  
with a short press.  
registration is maintained.  
Phonebook records are not cleared, but  
each language has a separate phonebook.  
Therefore, entries created in one language  
will need to be re-entered in the phonebook  
of the new language.  
2. Say: [Beep] “French” (Say the desired  
language: “English”, “French”, or  
“Spanish”.) (Change the desired  
language by saying the language  
name.)  
l
Do these steps before you start driving.  
These less used functions are too  
NOTE  
distracting to undertake while driving until  
you are fully familiar with the system.  
Other language settings can also be made  
while in the current setting by saying the name  
of the language in the native pronunciation.  
Method 1  
1. Press the pick-up button or talk button  
with a short press.  
3. Prompt: “Would you like to change  
the language to French (Desired  
language) ?”  
2. Say: [Beep] “Setup”  
4. Say: [Beep] “Yes”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
5. Prompt: “Please wait. Switching to  
French phonebook. French selected,  
returning to main menu” (Spoken in  
the newly selected language).  
4. Say: [Beep] “Language”  
Device programming (Pairing)  
5. Prompt: “Select a language: English,  
French, or Spanish.”  
To use Bluetooth Hands-Free, the device  
equipped with Bluetooth has to be  
programmed to the hands-free unit using  
the following procedure.  
6. Say: [Beep] “French” (Speak the  
desired language: “English”, “French”  
or “Spanish”)  
6-75  
Interior Comfort  
Bluetooth Hands-Free  
A maximum of seven devices including  
hands-free mobile phones and Bluetooth  
audio devices can be programmed to one  
vehicle.  
6. Prompt: “Select one of the following:  
Pair, edit, delete, or list.”  
7. Say: [Beep] “Pair”  
8. Prompt: “Please say a 4-digit pairing  
code.”  
NOTE  
l
A device can be programmed only when the  
vehicle is parked. If the vehicle starts to  
move, the pairing procedure will end.  
Programming is dangerous while driving -  
pair up your device before you start  
driving. Park the car in a safe place before  
programming.  
9. Say: [Beep] “XXXX” (Speak an  
arbitrary 4-digit pairing code. This can  
be any combination of 4 numbers.)  
NOTE  
l
Some devices accept only a particular  
pairing code (Usually, “0000” or “1234”).  
If pairing cannot be completed, refer to the  
owner's manual of your mobile device, and  
try those numbers if necessary.  
l
If a Bluetooth device has already been  
programmed to the vehicle as a Bluetooth  
audio device, it does not need to be  
programmed again when using the device  
as a hands-free mobile phone. Conversely,  
it does not need to be programmed again as  
a Bluetooth audio device if it has already  
been programmed as a hands-free mobile  
phone.  
l
Record the code as it will be used to  
program your device in Step 16.  
10. Prompt: “Pairing code XXXX (4-  
digit number). Is this correct?”  
l
11. Say: [Beep] “Yes” or “No”  
Since the communication range of a  
Bluetooth equipped device is about 10  
meters (32 ft), if a device is placed within a  
10-meter (32 ft) radius of the vehicle, it may  
be detected/programmed unintentionally  
while another device is being programmed.  
12. If “Yes”, go to Step 13.  
If “No”, the procedure returns to Step  
8.  
13. Prompt: “Start pairing procedure on  
the device. See the device manual for  
instructions.”  
1. Activate the Bluetooth application of  
the device.  
14. Using the device, perform a search  
for the Bluetooth device (Peripheral  
device).  
NOTE  
For the operation of the device, refer to its  
instruction manual.  
NOTE  
For the operation of the device, refer to its  
instruction manual.  
2. Press the pick-up button or talk button  
with a short press.  
3. Say: [Beep] “Setup”  
15. Select “Mazda” from the device list  
searched by the device.  
4. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
16. Input the 4-digit pairing code set in  
Step 9 to the device.  
17. Prompt: “Please say the name of the  
device after the beep.”  
5. Say: [Beep] “Pairing options”  
6-76  
Interior Comfort  
Bluetooth Hands-Free  
18. Say: [Beep] “XXXX - - -” (Speak a  
“device tag”, an arbitrary name for  
the device.)  
qMaking a Call Using a Telephone  
Number  
NOTE  
Example: “Stan's device.”  
Practice this while parked until you are  
confident you can do it while driving in a non-  
taxing road situation. If you are not completely  
comfortable, make all calls from a safe  
parking position, and move out only when fully  
under control and you can devote your eyes  
and mind to driving.  
NOTE  
Speak a programmed “device tag” within 10  
seconds.  
If more than two devices are to be  
programmed, they cannot be programmed with  
the same or similar “device tag”.  
19. Prompt: “Adding XXXXXX - - -  
(Ex. “Stan's device”) (Device tag). Is  
this correct?”  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Dial”  
20. Say: [Beep] “Yes”  
3. Prompt: “Number, please”  
21. Prompt: “Pairing complete”  
4. Say: [Beep] “XXXXXXXXXXX (Ex.  
“555-1234”) (Telephone number)”  
After a device is registered, the system  
automatically identifies the device. By  
activating Bluetooth Hands-Free again, or  
by activating Bluetooth Hands-Free first  
after switching the ignition from off  
(LOCK) to ACC, the system reads out a  
voice guidance, “XXXXXX - - - (Ex.  
“Stan's device”) (Device tag) is  
5. Prompt: “Dialing XXXXXXXXXXX  
(Ex. “555-1234”) (Telephone number)  
is this correct?”  
6. Say: [Beep] “Yes” or “No”.  
7. When “Yes” is spoken, the procedure  
proceeds to Step 8.  
connected”.  
When “No” is spoken, the procedure  
returns to Step 3.  
NOTE  
l
Device registration can also be done by  
8. Prompt: “Dialing”  
operating the audio unit. Refer to  
“Bluetooth Audio Preparation” (page  
6-63).  
NOTE  
The “Dial” command and a telephone number  
can be combined.  
l
Depending on the device, the registration  
status may be lost after a certain period of  
time. If this occurs, repeat the entire  
process from Step 1.  
Ex. In Step 2, say, “Dial 123-4567”, then,  
Steps 3 and 4 can be skipped.  
6-77  
Interior Comfort  
Bluetooth Hands-Free  
qReceiving an Incoming Call  
qVoice Guidance Interrupt Operation  
1. Prompt: “Incoming call, press the  
pickup button to answer”.  
Voice guidance can be stopped by  
pressing the talk button with a short press  
while it is being heard. A new voice input  
command can then be spoken by the user.  
· Press the talk button with a short press.  
2. To accept the call, press the pick-up  
button.  
To reject the call, press the hang-up  
button.  
qHelp Function Use  
qHanging Up a Call  
The help function informs the user of all  
the available voice commands under the  
current conditions.  
Press the hang-up button during the call.  
A beep sound will confirm that call is  
ended.  
1. Press the talk button with a short press.  
2. Say: [Beep] “Help”  
qVolume Adjustment  
3. Follow the prompts to receive the  
appropriate voice guidance  
instructions.  
The power/volume dial of the audio unit  
is used to adjust the volume. Turn the dial  
to the right to increase volume, to the left  
to decrease it.  
NOTE  
l
The volume can also be adjusted using the  
volume button on the steering wheel.  
l
The music volume of the audio unit cannot  
be adjusted while Bluetooth Hands-Free is  
being used.  
6-78  
Interior Comfort  
Bluetooth Hands-Free  
13. Prompt: “Number, please.”  
Convenient Use of the  
Hands-Free System  
14. Say: [Beep] “XXXXXXXXXXX  
(Ex. “555-1234”)” (Say the phone  
number to be registered.)  
qPhonebook Usage  
15. Prompt: “XXXXXXXXXXX (Ex.  
“555-1234”) (Phone number  
registration). Is this correct? ”  
Phonebook registration  
Phone numbers can be registered to the  
Bluetooth Hands-Free phonebook.  
16. Say: [Beep] “Yes”  
NOTE  
17. Prompt: “Number saved. Would you  
like to add another number for this  
entry?”  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
18. Say: [Beep] “Yes” or “No”.  
1. Press the pick-up button or talk button  
with a short press.  
19. If “Yes”, an additional phone number  
registration can be made for the same  
entry.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
If “No”, the procedure proceeds to  
Step 20.  
20. Prompt: “Returning to main menu.”  
4. Say: [Beep] “New entry”  
5. Prompt: “Name please.”  
Import contact  
Phonebook data from your device (Mobile  
phone) can be sent and registered to your  
Bluetooth Hands-Free phonebook using  
Bluetooth.  
6. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say a voice tag for the name  
registered.)  
1. Press the pick-up button or talk button  
with a short press.  
7. Prompt: “Adding XXXXX... (Ex.  
“Mary's phone”) (Registered voice  
tag). Is this correct?”  
2. Say: [Beep] “Phonebook”  
8. Say: [Beep] “Yes”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
9. Prompt: “Home, Work, Mobile, or  
Other?”  
4. Say: [Beep] “Import contact”  
10. Say: [Beep] “Mobile” (Say “Home”,  
“Work”, “Mobile”, or “Other”, for the  
desired location to be registered.)  
5. Prompt: “Ready to receive a contact  
from the phone.”  
11. Prompt: “Mobile” (Location to be  
registered). Is this correct?  
6. Device (Mobile phone) operation:  
Select one entry from the phonebook  
and send it using Bluetooth.  
12. Say: [Beep] “Yes”  
6-79  
Interior Comfort  
Bluetooth Hands-Free  
7. Prompt: “X (Number of locations  
which include data) numbers have been  
imported. What name would you like  
to use for these numbers?”  
5. Prompt: “Calling XXXXX... (Ex.  
“John's phone”) XXXX (Ex. “at  
home”). Is this correct?” (Voice tag and  
phone number location registered in  
phonebook).  
8. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say a voice tag for the name  
registered.)  
6. Say: [Beep] “Yes”  
7. Prompt: “Dialing”  
9. Prompt: “Adding XXXXX... (Ex.  
“Mary's phone”) (Voice tag). Is this  
correct?”  
NOTE  
The “Call” command and the voice tag can be  
combined.  
10. Say: [Beep] “Yes”  
Ex. In Step 2, say, “Call John's phone”, then,  
Steps 3 and 4 can be skipped.  
11. Prompt: “Number saved. Would you  
like to import another contact?”  
qRedialing Function  
12. Say: [Beep] “Yes” or “No”  
Redialing the number of the person  
previously dialed using the phone is  
possible.  
13. If “Yes”, the procedure proceeds to  
Step 5.  
If “No”, the procedure proceeds to  
Step 14.  
1. Press the pick-up button or talk button  
with a short press.  
14. Prompt: “Returning to main menu.”  
2. Say: [Beep] “Redial”  
3. Prompt: “Dialing”  
Making calls using the phonebook  
Telephone calls can be made by saying  
the name of a person (voice tag) whose  
phone number has been registered in  
Bluetooth Hands-Free in advance.  
For the phonebook setting method, refer  
to (page 6-82).  
qEmergency Calls  
A call can be made to the emergency  
phone number (911) using the voice input  
command.  
1. Press the pick-up button or talk button  
with a short press.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Call”  
2. Say: [Beep] “Emergency”  
3. Prompt: “Name please.”  
3. Prompt: “Dialing“911”, is this  
correct?”  
4. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say a voice tag registered in  
the phonebook.)  
4. Say: [Beep] “Yes”  
5. Prompt: “Dialing”  
6-80  
Interior Comfort  
Bluetooth Hands-Free  
3. Prompt: “Transferred call to Hands  
Free system”  
qRefusing an Incoming Call  
For incoming call refusal, refer to  
“Receiving an incoming call” (page 6-78).  
qMulti-Call Functions  
Call waiting  
qMute  
A call can be interrupted to receive an  
incoming call from a third party.  
The microphone can be muted during a  
call.  
Call interrupt  
1. Press the talk button with a short press.  
2. Say: [Beep] “Mute”  
A call can be switched to a new incoming  
call.  
3. Prompt: “Microphone muted”  
Canceling mute  
Method 1  
1. Press the pick-up button.  
2. Prompt: “Swapping calls.”  
Method 2  
1. Press the talk button with a short press.  
2. Say: [Beep] “Mute off”  
3. Prompt: “Microphone unmuted”  
1. Press the talk button with a short press.  
2. Say: [Beep] “Swap call”  
3. Prompt: “Swapping calls”  
NOTE  
qTransferring a Call  
Transferring a call from Hands-Free to  
a device (Mobile phone)  
Communication between the hands-free  
unit and a device (Mobile phone) is  
canceled, and the line can be switched to a  
standard call using a device (Mobile  
phone).  
l
To refuse an incoming call, press the hang-  
up button.  
l
After receiving a new incoming call, the  
previous call is placed on hold.  
Switching calls  
1. Press the talk button with a short press.  
2. Say: [Beep] “Transfer call”  
Switching back to the previous call can  
also be done.  
3. Prompt: “Transferred call to phone”  
Method 1  
Transferring a call from a device  
(Mobile phone) to Hands-Free  
1. Press the pick-up button.  
2. Prompt: “Swapping calls.”  
Method 2  
Communication between devices (Mobile  
phone) can be switched to Bluetooth  
Hands-Free.  
1. Press the talk button with a short press.  
2. Say: [Beep] “Swap call”  
3. Prompt: “Swapping calls”  
1. Press the talk button with a short press.  
2. Say: [Beep] “Transfer call”  
6-81  
Interior Comfort  
Bluetooth Hands-Free  
Three-way call function  
7. Prompt: “Dialing”  
1. Press the talk button with a short press.  
2. Say: [Beep] “Join call”  
Redialing function  
1. Press the talk button with a short press.  
2. Say: [Beep] “Redial”  
3. Prompt: “Dialing”  
3. Prompt: “Joining calls”  
Making a call using a telephone  
number  
Ending the current call  
1. Press the talk button with a short press.  
2. Say: [Beep] “Dial”  
Press the hang-up button during the call.  
qPhonebook Settings  
3. Prompt: “Number, please”  
Editing phonebook  
4. Say: [Beep] “XXXXXXXXXXX (Ex.  
“555-1234”) (Telephone number)”  
The data registered to the Bluetooth  
Hands-Free phonebook can be edited.  
5. Prompt: “Dialing XXXXXXXXXXX  
(Ex. “555-1234”) (Telephone number)  
is this correct?”  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
6. Say: [Beep] “Yes” or “No”.  
7. When “Yes” is spoken, the procedure  
proceeds to Step 8.  
1. Press the pick-up button or talk button  
with a short press.  
When “No” is spoken, the procedure  
returns to Step 3.  
2. Say: [Beep] “Phonebook”  
8. Prompt: “Dialing”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
Making calls using the phonebook  
1. Press the talk button with a short press.  
2. Say: [Beep] “Call”  
4. Say: [Beep] “Edit”  
5. Prompt: “Please say the name of the  
entry you would like to edit or say,  
“List names”.”  
3. Prompt: “Name please.”  
4. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say a voice tag registered in  
the phonebook.)  
6. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say the voice tag for the  
registered name to be edited in the  
phonebook.)  
5. Prompt: “Calling XXXXX... (Ex.  
“John's phone”) XXXX (Ex. “at  
home”). Is this correct?” (Voice tag and  
phone number location registered in  
phonebook).  
7. Prompt: “Home, Work, Mobile, or  
Other?”  
6. Say: [Beep] “Yes”  
6-82  
Interior Comfort  
Bluetooth Hands-Free  
8. Say: [Beep] “Home” (Say the  
registered location to be edited:  
“Home”, “Work”, “Mobile”, or  
“Other”).  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
9. Prompt: “XXXXX... (Ex. “Mary's  
phone”) (Registered voice tag) XXXX  
(Ex. “Home”) (Registered location). Is  
this correct?”  
4. Say: [Beep] “Delete”  
5. Prompt: “Please say the name of the  
entry you would like to delete or say,  
“List names”.”  
10. Say: [Beep] “Yes”  
6. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say the registered voice tag  
to be deleted from the phonebook.)  
11. Prompt: “The current number is  
XXXXXXXXXXX (Ex. “555-1234”)  
(Currently registered number). New  
number, please.”  
7. Prompt: “Deleting XXXXX... (Ex.  
“John's phone”) (Registered voice tag)  
Home (Registered location). Is this  
correct?”  
NOTE  
If there was no previous phone number  
registered to a location (Ex. “Work”), the  
prompt will only read out “Number, please”.  
8. Say: [Beep] “Yes”  
9. Prompt: “XXXXX... (Ex. “John's  
phone”) (Registered voice tag) Home  
(Registered location) deleted, returning  
to main menu.”  
12. Say: [Beep] “XXXXXXXXXXX  
(Ex. “555-5678”)” (Say the new  
phone number to be registered.)  
13. Prompt: “XXXXXXXXXXX (Ex.  
“555-5678”) (The new phone number  
to be registered). Is this correct?”  
Complete deletion of the phonebook  
data  
All data registered to the Bluetooth  
Hands-Free phonebook can be erased.  
14. Say: [Beep] “Yes”  
15. Prompt: “Number changed, returning  
to main menu.”  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
Phonebook data deletion  
Erasing individual phonebook data  
1. Press the pick-up button or talk button  
with a short press.  
Individual data registered to the Bluetooth  
Hands-Free phonebook can be cleared.  
NOTE  
2. Say: [Beep] “Phonebook”  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
1. Press the pick-up button or talk button  
with a short press.  
4. Say: [Beep] “Erase all”  
6-83  
Interior Comfort  
Bluetooth Hands-Free  
l
l
l
l
5. Prompt: “Are you sure you want to  
erase everything from your Hands Free  
system phonebook?”  
“Call”: Calls the registered phonebook  
data when the talk button is short-  
pressed.  
“Edit”: Edits the registered phonebook  
data when the talk button is short-  
pressed.  
“Delete”: Deletes the registered  
phonebook data when the talk button is  
short-pressed.  
“Previous”: Returns to the previous  
phonebook data in read-out when the  
talk button is short-pressed.  
6. Say: [Beep] “Yes”  
7. Prompt: “You are about to delete  
everything from your Hands Free  
system phonebook. Do you want to  
continue?”  
8. Say: [Beep] “Yes”  
9. Prompt: “Please wait, erasing the  
Hands Free system phonebook.”  
6. Prompt: “End of list, would you like  
to start from the beginning?”  
10. Prompt: “Hands-Free system  
phonebook erased, returning to main  
menu.”  
7. Say: [Beep] “No”  
8. Prompt: “Returning to main menu.”  
Read-out of names registered to the  
Bluetooth Hands-Free phonebook  
qDTMF (Dual Tone Multi-  
Frequency Signal) Transmission  
Bluetooth Hands-Free can read out the list  
of names registered to its phonebook.  
This function is used when transmitting  
DTMF via the user's voice. The receiver  
of a DTMF transmission is generally a  
home telephone answering machine or a  
company's automated guidance call center  
(When you send tone signals back  
according to the voice guidance  
recording).  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Phonebook”  
3. Prompt: “Select one of the following:  
New entry, edit, list names, delete,  
erase all or import contact.”  
4. Say: [Beep] “List names”  
1. Press the talk button with a short press.  
5. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. “John's phone”, Mary's  
phone, Bill's phone)” (Voice guidance  
reads out the voice tags registered to  
the phonebook.)  
2. Say: [Beep] “XXXX... send” (Say  
DTMF code)  
3. Prompt: “Sending XXXX... (DTMF  
code)”  
Press the talk button with a short press  
during the read-out at the desired name,  
and then say one of the following voice  
commands to execute it.  
l
“Continue”: Continues the list read-  
out.  
6-84  
Interior Comfort  
Bluetooth Hands-Free  
Press the talk button with a short press  
during the read-out at the desired device,  
and then say one of the following voice  
commands to execute it.  
Hands-Free Setting  
qDevice  
l
“Select phone”: Selects device (Mobile  
Device registration  
phone) when the talk button is short-  
pressed.  
“Select music player”: Selects device  
(Music player) when the talk button is  
short-pressed.  
“Edit”: Edits device when the talk  
For the registration of a Bluetooth  
equipped device to Bluetooth Hands-Free,  
refer to “Bluetooth Hands-Free  
Preparation” (page 6-75).  
l
l
Registered device read-out  
button is short-pressed.  
“Continue”: Continues the list read-  
out.  
“Delete”: Deletes the registered device  
Bluetooth Hands-Free can read-out the  
devices registered to its system.  
l
NOTE  
l
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
when the talk button is short-pressed.  
“Previous”: Returns to the previous  
device in read-out when the talk button  
is short-pressed.  
l
1. Press the pick-up button or talk button  
with a short press.  
8. Prompt: “End of list, would you like  
to start from the beginning?”  
2. Say: [Beep] “Setup”  
9. Say: [Beep] “No”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
10. Prompt: “Returning to main menu.”  
Device selection  
If several devices have been programmed,  
the Bluetooth unit links the device last  
programmed. If you would like to link a  
different programmed device, it is  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Select one of the following:  
Pair, edit, delete, or list.”  
necessary to change the link. The order of  
device priority after the link has been  
changed is maintained even when the  
ignition is switched off (LOCK).  
6. Say: [Beep] “List”  
7. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. Device A, device B,  
device C)” (The voice guidance reads  
out the device tags registered to the  
hands-free system.)  
Hands-free phone  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
6-85  
Interior Comfort  
Bluetooth Hands-Free  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
9. Prompt: “XXXXX... (Ex. device B...)  
(Device tag) selected.”  
NOTE  
Device (Music player) selection can also be  
done by operating the panel button (page  
6-63).  
4. Say: [Beep] “Select phone”  
5. Prompt: “Please say 1 for XXXXX...  
(Ex. device A), 2 for XXXXX... (Ex.  
device B...)”  
Registered device (Mobile phone)  
deletion  
6. Say: [Beep] “X” (Say the number for  
the mobile phone to be connected.)  
Registered devices (Mobile phone) can be  
deleted individually or collectively.  
7. Prompt: “XXXXX... (Ex. device B...)  
(Registered device tag) selected, is this  
correct?”  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
8. Say: [Beep] “Yes”  
1. Press the pick-up button or talk button  
with a short press.  
9. Prompt: “XXXXX... (Ex. device B...)  
(Device tag) will temporarily override  
phone priorities, returning to main  
menu.”  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
Music player  
1. Press the pick-up button or talk button  
with a short press.  
4. Say: [Beep] “Pairing options”  
2. Say: [Beep] “Setup”  
5. Prompt: “Select one of the following:  
Pair, edit, delete, or list.”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
NOTE  
A registered device (Mobile phone) can be  
deleted using the registration list.  
4. Say: [Beep] “Select music player”  
6. Say: [Beep] “Delete”  
5. Prompt: “Please say 1 for XXXXX...  
(Ex. device A), 2 for XXXXX... (Ex.  
device B...)”  
7. Prompt: “Please say 1 for XXXXX...  
(Ex. device A), 2 for XXXXX... (Ex.  
device B...)” (The device tag of the  
registered device is read out by the  
HFP.).  
6. Say: [Beep] “X” (Say the number for  
the music player to be connected.)  
7. Prompt: “XXXXX... (Ex. device B...)  
(Registered device tag) selected, is this  
correct?”  
8. Say: [Beep] “X” (Say the number of  
the device to be deleted.)  
8. Say: [Beep] “Yes”  
6-86  
Interior Comfort  
Bluetooth Hands-Free  
NOTE  
Say “All” to delete all devices (Mobile phone).  
qSecurity Setting  
If a passcode is set, the system cannot be  
activated unless the passcode is input.  
9. Prompt: “Deleting XXXXX... (Ex.  
device B...) (Registered device tag). Is  
this correct?”  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
10. Say: [Beep] “Yes”  
11. Prompt: “Deleted”  
Registered device editing  
Passcode setting  
1. Press the pick-up button or talk button  
with a short press.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
2. Say: [Beep] “Setup”  
3. Prompt:“Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Passcode”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Passcode is disabled. Would  
you like to enable it?”  
5. Prompt: “Select one of the following:  
Pair, edit, delete, or list.”  
6. Say: [Beep] “Yes”  
6. Say: [Beep] “Edit”  
7. Prompt:“Please say a 4-digit passcode.  
Remember this passcode. It will be  
required to use this system.”  
7. Prompt: “Please say 1 for XXXXX...  
(Ex. device A), 2 for XXXXX... (Ex.  
device B...), which device please?”  
(The device tag of the registered device  
is read out by the HFP.)  
8. Say: [Beep] “XXXX” (Say a desired 4-  
digit passcode, “PCode”.)  
8. Say: [Beep] “X” (Say the number of  
the device to be edited.)  
9. Prompt:“Passcode XXXX (Passcode,  
PCode). Is this correct?”  
9. Prompt: “New name please?”  
10. Say: [Beep] “Yes”  
10. Say: [Beep] “XXXXX... (Ex. device  
C)” (Speak a “device tag”, an  
arbitrary name for the device.)  
11. Prompt:“Passcode is enabled,  
returning to main menu.”  
Using Bluetooth Hands-Free with a  
passcode  
11. Prompt: “XXXXX... (Ex. device C)  
(Device tag), is this correct?”  
1. Press the pick-up button or talk button  
with a short press.  
12. Say: [Beep] “Yes”  
13. Prompt: “New name saved, returning  
to main menu.”  
6-87  
Interior Comfort  
Bluetooth Hands-Free  
2. Prompt:“Hands-Free system is locked.  
State the passcode to continue.”  
Confirmation Prompts  
The confirmation prompt confirms the  
command content to the user before  
advancing to the operation requested by  
the user. When this function is turned on,  
the system reads out the voice input  
command previously received and  
confirms whether the command is correct  
before advancing to the command  
execution.  
When the confirmation prompt function is  
turned on:  
(Ex. “Calling John's device. Is this  
correct?”)  
3. Say: [Beep] “XXXX” (Say the set  
passcode “PCode”.)  
4. If the correct passcode is input, voice  
guidance “XXXXXX... (Ex. “Mary's  
device) (Device tag) is connected” is  
announced.  
If the passcode is incorrect, voice  
guidance “XXXX (4-digit passcode,  
Pcode) incorrect passcode, please try  
again” is announced.  
Canceling the passcode  
When the confirmation prompt function is  
turned off:  
(Ex. “Calling John's device.”)  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
NOTE  
If the confirmation prompt function is turned  
off when making an emergency call, the system  
reads out and confirms the command before  
executing it.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Setup”  
1. Press the pick-up button or talk button  
with a short press.  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
2. Say: [Beep] “Setup”  
3. Prompt:“Select one of the following:  
Pairing options, confirmation prompts,  
language, passcode, select phone or  
select music player.”  
4. Say: [Beep] “Passcode”  
5. Prompt:“Passcode is enabled. Would  
you like to disable it?”  
4. Say: [Beep] “Confirmation prompts”  
6. Say: [Beep] “Yes”  
5. Prompt:“Confirmation prompts are  
on/off. Would you like to turn  
confirmation prompts off/on?”  
7. Prompt:“Passcode is disabled,  
returning to main menu.”  
6. Say: [Beep] “Yes”  
7. Prompt:“Confirmation prompts are  
off/on, returning to main menu.”  
6-88  
Interior Comfort  
Bluetooth Hands-Free  
5. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
qVoice Recognition Learning  
Function (Speaker Enrollment)  
The voice recognition learning function  
enables voice recognition appropriate to  
the characteristics of the user's voice.  
If the recognition of the voice input  
commands to the system is not adequate,  
this function can largely improve the  
system's voice recognition of the user. If  
your voice can be recognized sufficiently  
without using this function, you may not  
realize the added benefit of the function.  
To register your voice, the voice input  
command list must be read out. Read out  
the list when the vehicle is parked.  
Perform the registration in as quiet a place  
as possible (page 6-73).  
6. Say: [Beep] “0123456789” (Say the  
voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
7. Prompt: “Speaker enrollment is  
complete, returning to main menu.”  
NOTE  
If an error occurred in the voice recognition  
learning, re-learning can be done by pressing  
the talk button with a short press.  
Voice recognition re-learning  
The registration must be performed  
completely. The required time is a few  
minutes. The user needs to be seated in  
the driver's seat with the voice input  
command list for voice recognition  
learning open to the page indicated below.  
If voice recognition learning has already  
been done.  
1. Press the pick-up button or talk button  
with a short press.  
2. Say: [Beep] “Voice training”  
When voice recognition learning is  
done for the first time  
3. Prompt: “Enrollment is enabled/  
disabled. Would you like to disable/  
enable or retrain?”  
1. Press the pick-up button or talk button  
with a short press.  
4. Say: [Beep] “Retrain”  
2. Say: [Beep] “Voice training”  
5. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the talk  
button when you are ready to begin.  
Press the hangup button to cancel at  
any time.”  
3. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the talk  
button when you are ready to begin.  
Press the hangup button to cancel at  
any time.”  
6. Press the talk button with a short press.  
4. Press the talk button with a short press.  
6-89  
Interior Comfort  
Bluetooth Hands-Free  
7. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
NOTE  
l
The applicable phrase appears in the  
display.  
l
After user voice registration is completed,  
voice guidance “Speaker enrollment is  
complete, returning to main menu” is  
announced.  
8. Say: [Beep] “0123456789” (Say the  
voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
Voice recognition learning on/off  
1. Press the pick-up button or talk button  
with a short press.  
9. Prompt: “Speaker enrollment is  
complete, returning to main menu.”  
2. Say: [Beep] “Voice training”  
NOTE  
3. Prompt: “Enrollment is enabled/  
disabled. Would you like to disable/  
enable or retrain?”  
If an error occurred in the voice recognition  
learning, re-learning can be done by pressing  
the talk button with a short press.  
4. Say: [Beep] “Disable” or “Enable”  
Voice input command list for voice  
recognition learning  
5. When “Disable” is spoken, the voice  
recognition learning is turned off.  
When “Enable” is spoken, the voice  
recognition learning is turned on.  
When reading out, the following points  
must be observed:  
l
Read out the numbers one at a time  
correctly and naturally.  
(For example, “1234” must be read out  
“one, two, three, four”, not “twelve, thirty  
four”.)  
6. Prompt: “Speaker Enrollment is  
disabled/enabled, returning to main  
menu.”  
l
Do not read out parentheses. “ (” and  
hyphens “-” are used for separating  
numbers in a phone number.  
Ex.  
“ (888) 555-1212” must be spoken “Eight,  
eight, eight, five, five, five, one, two, one,  
two.”  
Phrase  
Command  
0123456789  
1
2
3
4
5
6
7
8
(888) 555-1212  
Call  
Dial  
Setup  
Cancel  
Continue  
Help  
6-90  
Interior Comfort  
Bluetooth Hands-Free  
Safety Certification  
When Bluetooth Hands-  
Free Cannot be Used  
FCC ID: CB2MBLUEC07 IC:279B-  
MBLUEC07  
This device complies with Part 15 of the  
FCC Rules and with RSS-210 of Industry  
Canada. Operation is subject to the  
following two conditions:  
(1) This device may not cause harmful  
interference, and  
(2) This device must accept any  
interference received, including  
interference that may cause undesired  
operation.  
Bluetooth Hands-Free cannot be used  
under the following conditions:  
l
The device is outside of the  
communication area.  
l
The device has a malfunction.  
The device is not connected to the  
l
hands-free unit equipped on the  
vehicle.  
The device's battery is weak.  
l
l
The device is turned off.  
The device is placed where radio  
l
reception is difficult.  
The ignition is switched off (LOCK).  
WARNING  
l
Changes or modifications not  
expressively approved by the party  
responsible for compliance could void  
the user's authority to operate the  
equipment.  
The term “IC: ” before the radio  
certification number only signifies that  
Industry Canada technical specifications  
were met.  
The antenna used for this transmitter must  
not be co-located or operating in  
conjunction with any other antenna or  
transmitter. End-users and installers must  
be provided with installation instructions  
and transmitter operating conditions for  
satisfying RF exposure compliance.  
6-91  
Interior Comfort  
Bluetooth Hands-Free  
Mazda Bluetooth Hands-  
Free Customer Service  
For toll-free Bluetooth Hands-Free  
customer service call 800-430-0153 or go  
to www.MazdaUSA.com/bluetooth for  
assistance.  
6-92  
Interior Comfort  
Interior Equipment  
Sunvisors  
Interior Lights  
When you need a sunvisor, lower it for  
use in front or swing it to the side.  
qIlluminated Entry System  
When the illuminated entry system  
operates, the overhead light (switch is in  
the DOOR position) turns on for:  
Sunvisor  
l
About 30 seconds after the driver's  
door is unlocked and the ignition key is  
removed (without advanced key) or the  
ignition is switched off (with advanced  
key).  
l
About 15 seconds after all doors are  
closed.  
(With Advanced key)  
About 5 seconds after all doors are  
closed when the advanced key is  
outside of the vehicle.  
qVanity Mirrors  
l
About 15 seconds after the ignition is  
To use the vanity mirror, lower the  
sunvisor.  
If your vehicle is equipped with a vanity  
mirror light, it will illuminate when you  
open the cover.  
switched off (LOCK) and the ignition  
key removed (without advanced key)  
with all doors closed.  
The light also turns off when:  
l
The ignition is switched on and all  
doors are closed.  
The driver's door is locked.  
l
NOTE  
l
Battery saver  
If any door is left opened, the light turns off  
after about 30 minutes to save the battery.  
The light turns on again when the ignition  
is switched on, or when any door is opened  
after all doors have been closed.  
l
The operation of the illuminated entry  
system can be changed.  
Refer to Personalization Features on page  
10-10.  
6-93  
Interior Comfort  
Interior Equipment  
qOverhead Lights  
qMap Lights  
Front  
The map lights are switched on or off by  
pressing the switches.  
Rear  
qLuggage Compartment Light (5  
Door)  
Switch  
Position  
Overhead Lights  
Light off  
Switch  
Luggage Compartment Light  
Position  
l
Light is on when any door is open  
Light is on or off when the  
illuminated entry system is on  
l
Light off  
Light on  
Light on when the liftgate is open  
6-94  
Interior Comfort  
Interior Equipment  
Information Display  
Clock  
Audio display  
Without multi  
information  
display  
Ambient temperature display Climate control display Hands-free display  
Audio display  
With multi  
information  
display  
Climate control display  
Clock adjustment  
buttons  
qInformation Display Functions  
The information display has the following functions:  
Clockí  
l
Ambient Temperature Display (Outside Temperature Display)í  
Climate Control Display  
l
l
l
Audio Display  
Bluetooth Hands-Free Displayí Refer to Bluetooth Hands-Free on page 6-71.  
l
íSome models.  
6-95  
Interior Comfort  
Interior Equipment  
qClockí  
qOutside Temperature Display  
(Fully Automatic Type)  
The time is displayed when the ignition is  
switched to ACC or ON.  
When the ignition switch is in the ON  
position, the ambient temperature is  
displayed.  
Time setting  
1. Turn the ignition switch to the ACC or  
ON position.  
NOTE  
Under the following conditions, the ambient  
temperature display may differ from the actual  
ambient temperature depending on the  
surroundings and vehicle conditions:  
2. Adjust the time using the time setting  
buttons (  
,
).  
The hours advance while the time  
setting button ( ) is pressed.  
l
Significantly cold or hot temperatures.  
l
The minutes advance while the time  
setting button ( ) is pressed.  
Sudden changes in ambient temperature.  
l
The vehicle is parked.  
l
The vehicle is driven at low speeds.  
Time resetting  
1. Turn the ignition switch to the ACC or  
ON position.  
qClimate Control Display  
The climate control system status is  
displayed. To operate the climate control  
system, refer to “Climate Control System”  
(page 6-2).  
2. Press the :00 button.  
3. When the button is pressed, the time  
will be reset as follows:  
(Example)  
12:01―12:29→12:00  
12:30―12:59→1:00  
qAudio Display  
The audio system status is displayed. To  
operate the audio system, refer to  
“Audio System” (page 6-16).  
NOTE  
When the :00 button is pressed, the seconds  
will start at “00”.  
6-96  
íSome models.  
Interior Comfort  
Interior Equipment  
í
Multi Information Display  
Without navigation system  
With navigation system  
Clock adjustment  
buttons  
Steering switch  
Steering Switch  
Enter (up/down) switch  
Left switch  
Navi switch  
Right switch  
INFO switch  
BACK switch  
íSome models.  
6-97  
Interior Comfort  
Interior Equipment  
Switch  
Function  
Enter (up/down) switch Used to select a menu and change numbers. Select up or down and press enter.  
Right switch/Left  
switch  
Used to select digits when setting numbers.  
Navi switch  
(With navigation sys-  
tem)  
Press to switch the system to the navigation system screen.  
BACK switch  
INFO switch  
Press during SETTINGS to return to the previous screen.  
Press to switch to the multi information display.  
Switches the setting display in the order of Trip computer  
(average fuel economy/average vehicle speed) → Trip computer  
(current fuel economy/distance-to-empty) → Audio display → Settings  
(reset averages/maintenance/preferences). Each time the switch is pressed, the multi  
information display cycles through.  
qMulti Information Display Functions  
Function name  
Clock  
Details  
See page  
6-99  
6-99  
Constant display of time.  
Outside temperature Constant display of ambient temperature.  
display  
Audio display  
Displays the audio operation status. Displayed when the INFO switch is 6-100  
pressed.  
Trip computer  
Displays the average fuel economy, average vehicle speed, current fuel  
economy, and distance-to-empty. Displayed when the INFO switch is  
pressed.  
6-100  
Maintenance monitor Notification of periodic inspection and tire rotation period  
6-102  
6-106  
Warning indicator  
Settings  
Notification of the need to take caution  
Used to change the multi information display settings. Displayed when the 6-106  
INFO switch is pressed.  
Navigation system  
Refer to the separate manual  
6-98  
Interior Comfort  
Interior Equipment  
NOTE  
l
qClock  
Daylight saving time is not reflected in the  
time zone displayed.  
The time is displayed when the ignition is  
switched to ACC or ON.  
l
l
The clock does not display if there is no  
GPS signal reception.  
If the battery cables are disconnected and  
then reconnected, the clock does not  
operate until a GPS signal is received. Do  
not place objects on the dashboard,  
otherwise the clock may be unable to  
receive the GPS signal normally.  
qOutside Temperature Display  
When the ignition switch is switched ON,  
the ambient temperature is displayed.  
Time setting  
Refer to Clock on page 6-96.  
Time resetting  
Refer to Clock on page 6-96.  
With navigation system  
Time zone switching  
1. Press the INFO switch until the  
SETTINGS screen is displayed.  
2. Select PREFERENCES by pressing the  
Enter (up/down) switch up or down,  
and then press the Enter (up/down)  
switch.  
NOTE  
l
Under the following conditions, the ambient  
temperature display may differ from the  
actual ambient temperature depending on  
the surroundings and vehicle conditions:  
3. Select TIME ZONE by pressing the  
Enter (up/down) switch up or down,  
and then press the Enter (up/down)  
switch.  
l
Significantly cold or hot temperatures.  
l
Sudden changes in ambient temperature.  
l
The vehicle is parked.  
l
The vehicle is driven at low speeds.  
4. Select the desired time zone by  
pressing the Enter (up/down) switch up  
or down, and then press the Enter (up/  
down) switch.  
l
When the ignition is switched to ACC,  
“- - -” is displayed.  
6-99  
Interior Comfort  
Interior Equipment  
Average fuel economy  
qAudio Display  
This mode displays the average fuel  
economy by calculating the total fuel  
consumption and the total traveled  
distance since purchasing the vehicle, re-  
connecting the battery after disconnection,  
or resetting the data. The average fuel  
economy is calculated and displayed  
every minute.  
Press the INFO switch until the AUDIO  
screen is displayed. The audio operation  
status is displayed.  
To operate the audio system, refer to  
“Audio System” (page 6-16).  
qTrip Computer  
The trip computer can display the  
following:  
l
The average fuel economy.  
The average vehicle speed.  
l
l
The current fuel economy.  
The approximate distance you can  
l
travel on the available fuel.  
1. Switch the ignition ON.  
2. Press the INFO switch until the trip  
computer screen is displayed.  
If you have any problems with your trip  
computer, consult an Authorized Mazda  
Dealer.  
To erase the displayed data, Refer to  
Settings on page 6-106.  
After erasing, the calculated average fuel  
economy in - - - L/100 km (- - - mpg) is  
displayed after 1 minute has elapsed.  
Average vehicle speed  
This mode displays the average vehicle  
speed by calculating the distance and the  
time traveled since connecting the battery  
or resetting the data.  
6-100  
Interior Comfort  
Interior Equipment  
The average vehicle speed will be  
calculated every 10 seconds.  
Distance-to-empty  
This mode displays the approximate  
distance you can travel on the remaining  
fuel based on the fuel economy.  
The distance-to-empty will be calculated  
every second.  
To erase the displayed data, Refer to  
Settings on page 6-106.  
After erasing, the calculated average  
vehicle speed in - - - km/h (- - - mph) is  
displayed after 1 minute has elapsed.  
NOTE  
l
Even though the distance-to-empty display  
Current fuel economy  
may indicate a sufficient amount of  
remaining driving distance before refueling  
is required, refuel as soon as possible if the  
fuel gauge needle nears E or the low fuel  
warning light illuminates.  
This mode displays the current fuel  
economy by calculating the amount of  
fuel consumption and the distance  
traveled.  
The current fuel economy will be  
calculated every 2 seconds.  
l
The display will not change unless you add  
more than approximately 5 L {6 US qt, 5  
lmp qt} of fuel.  
l
When the ignition is switched to ACC,  
“- - -” is displayed.  
When you've slowed to about 5 km/h (3  
mph), - - - L/100 km (- - - mpg) will be  
displayed.  
6-101  
Interior Comfort  
Interior Equipment  
5. Select SET and press the Enter (up/  
down) switch.  
qMaintenance Monitor  
The periodic inspection and tire rotation  
period notification can be displayed by  
turning the Maintenance Monitor on.  
NOTE  
l
This function is inoperable while the  
vehicle is being driven.  
l
(With navigation system)  
If the battery cables are disconnected and  
then reconnected, the SERVICE DUE item  
in the MAINTENANCE setting cannot be  
done until the clock resets after receiving a  
GPS signal. Perform this setting after the  
clock resumes operation.  
NOTE  
l
For the service due notification, either the  
Initial setting method  
number of days or distance can be set.  
When selecting one of the two settings, the  
setting not selected is set to the initial value  
automatically.  
1. Press the INFO switch until the  
SETTINGS screen is displayed.  
2. Select MAINTENANCE by pressing  
the Enter (up/down) switch up or  
down, and then press the Enter (up/  
down) switch.  
l
Because tire rotation can only be set  
according to distance, the screen for setting  
distance is displayed when SET is selected.  
6. Select DISTANCE or DAYS and press  
the Enter (up/down) switch. The screen  
for setting the distance or days to the  
next maintenance period is displayed.  
3. Select the item you want to turn on  
(TIRE ROTATION or SERVICE DUE)  
by pressing the Enter (up/down) switch  
up or down, and then press the Enter  
(up/down) switch.  
4. Press the Enter (up/down) switch.  
6-102  
Interior Comfort  
Interior Equipment  
7. Select a digit using the Right switch/  
Left switch, and press the Enter (up/  
down) switch up or down to change the  
value of the digit. If there is no need to  
change a digit, leave it as it is and press  
the Enter (up/down) switch.  
NOTE  
l
If the Enter (up/down) switch is pressed  
while a message is displayed, it will no  
longer be displayed the next time the engine  
is started.  
l
After the vehicle is serviced and the  
remaining days/distance is reset, the  
message for the next maintenance period  
will be displayed when the remaining  
distance or days to the next maintenance  
period approaches 0 (displays when engine  
is started).  
l
If there are multiple tire rotation periods or  
service due, they are displayed according to  
their order.  
l
If there is more than one servicing due  
deadline with one past due and the other  
approaching, only the one which is past due  
will be displayed.  
NOTE  
The initial setting values are displayed  
corresponding to the maintenance schedule  
(except Puerto Rico). For each regional  
maintenance schedule, Refer to Scheduled  
Maintenance on page 8-3.  
Message display  
When the remaining days or the distance  
approaches 0, a message is displayed for 5  
seconds each time the ignition is switched  
to ACC or ON.  
6-103  
Interior Comfort  
Interior Equipment  
Display period  
Item  
Start of message display  
End of message display  
TIRE ROTATION  
When remaining distance is less  
than 500 km (300 mile)  
Distance exceeds 500 km (300 mile) from  
remaining distance of 0 km  
SERVICE DUE  
When remaining distance is less  
than 500 km (300 mile), or  
remaining days are less than 15  
(which ever comes first)  
Distance exceeds 500 km (300 mile) from  
remaining distance of 0 km, or 15 days have  
elapsed since remaining days reached “0” days  
(which ever comes first)  
Message display  
Item  
Timing  
Displayed message  
TIRE ROTATION  
Remaining distance:  
500 km (300 mile) to -500 km (-300 mile)  
TIRE ROTATION DUE  
SERVICE DUE  
Remaining distance:  
500 km (300 mile) to 0 km (0 mile)  
SERVICE DUE  
Remaining days: 15 to 0 days  
Remaining distance:  
0 km (0 mile) to -500 km (-300 mile)  
SERVICE OVERDUE  
Remaining days: 0 to 15 days  
Reset method  
3. Select the item you would like to reset  
(TIRE ROTATION or SERVICE DUE)  
by pressing the Enter (up/down) switch  
up or down, and then press the Enter  
(up/down) switch.  
If resetting is performed after a tire  
rotation or periodic inspection has been  
done, a notification of the next  
maintenance period will be displayed  
when the period approaches.  
1. Press the INFO switch until the  
SETTINGS screen is displayed.  
2. Select MAINTENANCE by pressing  
the Enter (up/down) switch up or  
down, and then press the Enter (up/  
down) switch.  
NOTE  
l
The current remaining distance and days is  
displayed.  
l
Even if the remaining distance or days have  
surpassed 0, the display does not display a  
minus (―) and leaves the value at 0.  
4. Press the Enter (up/down) switch.  
6-104  
Interior Comfort  
Interior Equipment  
5. Select SET and press the Enter (up/  
down) switch.  
NOTE  
l
If the settings are changed from the initial  
values, the values which you set are  
displayed, not the initial values.  
Even if the battery is disconnected, the  
remaining distance and days information is  
not erased.  
l
l
If the multi information display is replaced  
or repaired, there is the possibility of the  
remaining distance and days information  
being erased.  
Method for turning the system off  
The maintenance monitor can be turned  
off even after it has been turned on. If you  
want to turn it off, the remaining distance  
and days calculation to the next  
maintenance period is stopped, and a  
message does not display to indicate an  
approaching maintenance period.  
NOTE  
If the SERVICE DUE item has been set, both  
the days and distance can be selected. Because  
the tire rotation item can only be set according  
to distance, the screen for setting distance is  
displayed when SET is selected.  
1. Press the INFO switch until the  
SETTINGS screen is displayed.  
6. The DISTANCE or DAYS screen is  
displayed, and the remaining distance  
and days values return to the values  
previously set. If no changes are  
necessary, press the Enter (up/down)  
switch.  
2. Select MAINTENANCE by pressing  
the Enter (up/down) switch up or  
down, and then press the Enter (up/  
down) switch.  
6-105  
Interior Comfort  
Interior Equipment  
l
l
3. Select the item you want to turn off  
(TIRE ROTATION or SERVICE DUE)  
by pressing the Enter (up/down) switch  
up or down, and then press the Enter  
(up/down) switch.  
RELEASE PARKING BRAKE  
Advanced Keyless Entry System  
related  
l
KEY BATTERY IS LOW  
ADVANCED KEY NOT FOUND  
l
l
MOVE SHIFT LEVER TO P  
STEERING WHEEL LOCK NOT  
l
RELEASED TURN WHEEL LEFT  
AND RIGHT  
DEPRESS BRAKE PEDAL TO  
l
START ENGINE  
DEPRESS CLUTCH PEDAL TO  
l
START ENGINE  
USE AUXILIARY KEY  
l
NOTE  
When more than two warnings occur at the  
same time, indicators are switched at each  
specified time.  
4. Select OFF and press the Enter (up/  
down) switch.  
qSettings  
The following settings can be changed:  
l
Buzzer volume (Ignition key reminder,  
lights-on reminder)  
l
Turn indicator sound  
Distance unit  
l
l
Temperature unit  
Display language  
l
The data for the trip computer average  
fuel economy and the average vehicle  
speed can also be changed.  
To change settings  
qWarning Indicator  
1. Press the INFO switch until the  
SETTINGS screen is displayed.  
The following warning indicators are  
displayed according to necessity. Warning  
indicators are displayed regardless of the  
multi-information display operation.  
2. Select PREFERENCES by pressing the  
Enter (up/down) switch up or down,  
and then press the Enter (up/down)  
switch.  
l
DOOR OPEN (including trunk and the  
liftgate)  
TIGHTEN FUEL CAP (Displayed  
l
3. Select the setting item you want to  
change by pressing the Enter (up/  
down) switch up or down, and then  
press the Enter (up/down) switch.  
when the check fuel cap warning light  
illuminates in the instrument cluster.)  
CHECK TIRE PRESSURE  
l
6-106  
Interior Comfort  
Interior Equipment  
4. Select the desired setting by pressing  
the Enter (up/down) switch up or  
down, and then press the Enter (up/  
down) switch.  
Cup Holder  
WARNING  
Never use a cup holder to hold hot  
liquids while the vehicle is moving:  
Using a cup holder to hold hot liquids  
while the vehicle is moving is  
NOTE  
The buzzer volume for both the ignition key  
reminder and the lights-on reminder is  
changed simultaneously. If you prefer separate  
buzzer volume settings, consult an Authorized  
Mazda Dealer. If separate buzzer volume  
settings have been done at an Authorized  
Mazda Dealer, you will be unable to change  
the settings.  
dangerous. If the contents spill, you  
could be scalded.  
CAUTION  
To reduce the possibility of injury in  
an accident or a sudden stop, keep  
the cup holders closed when they are  
not in use, or when using them for  
storage.  
Resetting the data for the trip computer  
average fuel economy and the average  
vehicle speed  
1. Press the INFO switch until the  
SETTINGS screen is displayed.  
qFront  
To use, open the cover.  
2. Select RESET AVERAGES and press  
the Enter (up/down) switch.  
3. Select FUEL ECONOMY or SPEED,  
and press the Enter (up/down) switch.  
6-107  
Interior Comfort  
Interior Equipment  
qRear  
Bottle Holder  
The rear cup holder is on the rear center  
armrest.  
Bottle holders are on the inside of the  
doors.  
Bottle holder  
CAUTION  
Do not use the bottle holders for  
containers without caps. The  
contents may spill when the door is  
opened or closed.  
6-108  
Interior Comfort  
Interior Equipment  
qGlove Compartment  
Storage Compartments  
To open the glove box, pull the latch  
toward you.  
WARNING  
Keep storage boxes closed when  
driving:  
Driving with the storage boxes open  
is dangerous. To reduce the  
possibility of injury in an accident or  
a sudden stop, keep the storage  
boxes closed when driving.  
CAUTION  
Do not leave lighters or eyeglasses in  
the storage boxes while parked under  
the sun. A lighter could explode or  
the plastic material in eyeglasses  
could deform and crack from high  
temperature.  
qCenter Console  
To open, pull the lower release handle.  
qOverhead Consoleí  
This console box is designed to store  
eyeglasses or other accessories.  
Push and release to open.  
íSome models. 6-109  
Interior Comfort  
Interior Equipment  
Storage trayí  
Press the button to slide the armrest  
frontward.  
The storage tray can be installed to the  
left/right side of the center console.  
Storage tray  
To retract the armrest, slide it completely  
to the rear.  
Using the armrestí  
CAUTION  
Ø When sliding the armrest, be  
careful not to hit a drink cup  
placed in a cup holder and spill its  
contents. Remove cups or other  
drink containers from the cup  
holders before pulling out the  
armrest.  
Ø Before opening the center console,  
store the armrest first. Otherwise,  
the armrest or center console may  
be damaged.  
qCargo Securing Loops (5 Door)  
WARNING  
Make sure luggage and cargo is  
secured before driving:  
Not securing cargo while driving is  
dangerous as it could move or be  
crushed during sudden braking or a  
collision and cause injury.  
6-110 íSome models.  
Interior Comfort  
Interior Equipment  
Use the loops in the luggage compartment  
to secure cargo with a rope or net. The  
tensile strength of the loops is 196 N (20  
kgf, 44 lbf). Do not apply excessive force  
to the loops as it will damage them.  
qRear Coat Hooks  
WARNING  
Never hang heavy or sharp objects on  
the assist grips and coat hooks:  
Hanging heavy or sharp-ended  
objects such as a coat hanger from  
the assist grips or coat hooks is  
dangerous as they can fly off and hit  
an occupant in the cabin if a curtain  
air bag was to deploy, which could  
result in serious injury or death.  
Always hang clothes on the coat hooks  
and the assist grips without hangers.  
qShopping Bag Hook (5 Door)  
The shopping bag hook can be used for  
hanging shopping bags.  
CAUTION  
Coat hook  
Do not hang excessive weight on the  
shopping bag hook as it could be  
damaged.  
Shopping bag hook  
(tensile strength: 3 kg  
(6.6 lb))  
6-111  
Interior Comfort  
Interior Equipment  
Accessory Sockets  
Only use genuine Mazda accessories or  
the equivalent requiring no greater than  
120 W (DC 12 V, 10 A).  
Front  
The ignition switch must be in the ACC  
or ON position.  
To use, press the cover and open it.  
With Seat Warmer  
Rear  
The accessory sockets can be used  
regardless of the position of the ignition  
switch.  
Without Seat Warmer  
6-112  
Interior Comfort  
Interior Equipment  
2. Pass the connection plug cord through  
the cutout of the console and insert the  
plug into the accessory socket.  
CAUTION  
To prevent accessory socket damage  
or electrical failure, pay attention to  
the following:  
Plug  
Ø Do not use accessories that require  
more than 120 W (DC 12 V, 10 A).  
Ø Do not use accessories that are not  
genuine Mazda accessories or the  
equivalent.  
Ø Close the cover when the accessory  
socket is not in use to prevent  
foreign objects and liquids from  
getting into the accessory socket.  
Ø Correctly insert the plug into the  
accessory socket.  
Ø Do not insert the cigarette lighter  
into the accessory socket.  
Noise may occur on the audio  
playback or TV reception depending  
on the device connected to the  
accessory socket.  
NOTE  
To prevent discharging of the battery, do not  
use the socket for long periods with the engine  
off or idling.  
Connecting the accessory socket  
1. Open the lid.  
6-113  
6-114  

Related Topics

Climate Control System Audio System Bluetooth Audio Bluetooth Hands-Free Interior Equipment

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot