2010-2013 Mazda 3 4 Door Interior Comfort -> Bluetooth Audio User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Interior Comfort -> Bluetooth Audio for Your Mazda 3 4 Door Second Generation (2010-2013)

Interior Comfort  
Bluetooth Audio  
Applicable Bluetooth specification  
Ver. 2.0 or higher  
í
Bluetooth Audio  
qWhat is Bluetooth Audio?  
Audio profile  
l
A2DP (Advanced Audio Distribution  
Profile) Ver. 1.0  
AVRCP (Audio/Video Remote Control  
Profile) Ver. 1.0  
Bluetooth audio outline  
By programming portable audio devices  
equipped with the Bluetooth  
l
communication function to the vehicle's  
Bluetooth unit, you can listen to music or  
audio recorded on these audio devices  
from the vehicle's speakers. Bluetooth  
audio devices are not those you do not  
need to plug into the auxiliary jack.  
After programming, operate the audio  
system's control panel to play/stop the  
music or audio.  
A2DP is a profile which transmits only  
audio to the Bluetooth unit. If your  
Bluetooth audio device corresponds only  
to A2DP, but not AVRCP, you cannot  
operate it using the control panel of the  
vehicle's audio system. In this case, the  
Bluetooth audio device can be operated  
by controlling the device itself, the same  
as when a portable audio system without  
the Bluetooth communication function is  
connected to the AUX terminal.  
CAUTION  
Ø Always program audio devices to  
the Bluetooth audio system while  
the vehicle is stopped.  
Function  
Playback  
A2DP  
No  
A2DP·AVRCP  
Yes  
Ø Because only specified Bluetooth  
audio devices can be used, consult  
an Authorized Mazda Dealer when  
purchasing or changing devices.  
Bluetooth audio devices which  
correspond to specified Bluetooth  
versions and profiles can be  
Bluetooth-connected to the  
vehicle's Bluetooth unit, however,  
even among these devices are ones  
which cannot be Bluetooth-  
connected or have limited  
Pause  
No  
Yes  
File (Track)  
up/down  
No  
Yes  
Yes: Available  
No: Not available  
functionality. Each device to be  
used with the vehicle's Bluetooth  
unit needs to be checked  
individually for compatibility.  
Consult an Authorized Mazda  
Dealer concerning device  
Bluetooth is the registered trademark of  
Bluetooth SIG. Inc.  
compatibility.  
Phone: 800-430-0153  
Web: www.MazdaUSA.com/  
bluetooth  
6-62  
íSome models.  
Interior Comfort  
Bluetooth Audio  
NOTE  
l
qBluetooth Audio Preparation  
It may not be possible to play a Bluetooth  
Bluetooth audio device set-up  
audio device if it is placed anywhere  
transmission is compromised, such as  
inside a metal container or the trunk. Move  
the Bluetooth audio device to a location  
where transmission is possible.  
Bluetooth audio programming, changes,  
deletions, and display of programmed  
device information can be performed.  
1. The mode changes as follows each  
time the audio control dial is pressed.  
Select “BT SETUP”.  
l
Battery consumption of Bluetooth audio  
devices is higher while Bluetooth-  
connected.  
l
If a non-Bluetooth device is to be used, a  
commercially-available Bluetooth adapter  
is required. When playing an audio device  
with a Bluetooth adapter installed,  
programming of the audio device may not  
be possible or audio may not be heard from  
the vehicle speakers if the connection of the  
adapter and the device is poor. If this  
happens, check if the Bluetooth adapter is  
properly connected.  
Standard audio-equipped model  
*
*
*
*
6-63  
Interior Comfort  
Bluetooth Audio  
Display  
Mode  
Pairing  
program mode  
Function  
Bose Sound System-equipped model  
Bluetooth  
audio device  
programming  
PAIR DEVICE  
*
Changing link  
to Bluetooth  
audio device  
*
Link change  
mode  
LINK CHANGE  
PAIR DELETE  
Deleting link  
to Bluetooth  
audio device  
Pairing  
deletion mode  
Displaying  
vehicle's  
Bluetooth unit  
information  
Device  
information  
display mode  
DEVICE INFO  
3. Press the audio control dial to  
determine the mode.  
*
*
*
Bluetooth audio device programming  
Any Bluetooth audio device must be  
programmed to the vehicle's Bluetooth  
unit before it can be listened to over the  
vehicle's speakers.  
A maximum of seven devices including  
Bluetooth audio devices and hands-free  
mobile phones can be programmed to one  
vehicle.  
* Depending on the mode selected, the  
indication changes.  
2. Turn the audio control dial and select a  
desired mode.  
6-64  
Interior Comfort  
Bluetooth Audio  
NOTE  
l
2. Press the audio control dial to  
determine the mode.  
Always perform Bluetooth audio device  
programming while the vehicle is stopped.  
If a Bluetooth device has already been  
programmed to the vehicle as a hands-free  
mobile phone, it does not need to be  
programmed again when using the device  
as a Bluetooth audio device. Conversely, it  
does not need to be programmed again as a  
hands-free mobile phone if it has already  
been programmed as a Bluetooth audio  
device.  
After “ENTER PIN” is displayed on  
the information display for three  
seconds, “PIN 0000” is displayed and  
the PIN code can be input.  
l
3. Input the PIN code of your Bluetooth  
audio device by pressing channel  
preset buttons 1 to 4 while “PIN 0000”  
is displayed.  
Press channel preset button 1 to input  
the first digit, 2 for the second, 3 for  
the third, and 4 for the forth. For  
example, if the PIN code were “4213”,  
press channel preset button 1 four  
times (1, 2, 3, 4), button 2 twice (1, 2),  
button 3 once (1), and button 4 three  
times (1, 2, 3). If the “PIN 0000”  
display disappears before finishing the  
PIN code input, repeat the procedure  
from Step 1.  
l
Look around to be sure other likely  
Bluetooth audio devices are not in range  
when you start to program. If in doubt,  
move your car to another location. The  
transmission range of a Bluetooth audio  
device is about 10 m (32 ft). Therefore, if  
there is another Bluetooth audio device  
within a 10 m (32 ft) radius of the vehicle,  
the device may be identified and  
programmed instead.  
l
Device registration can also be done using  
voice recognition (page 6-75).  
NOTE  
Some devices accept only a particular pairing  
code (Usually, “0000” or “1234”).  
If pairing cannot be completed, refer to the  
owner's manual of your mobile device, and try  
those numbers if necessary.  
Concerning the operation of a Bluetooth  
audio device itself, refer to its instruction  
manual.  
Some Bluetooth audio devices have PIN  
codes (four digits). Refer to the audio  
device's instruction manual because the  
programming procedure differs depending  
on whether it has a PIN code or not.  
4. Press the audio control dial while the  
input PIN code is displayed.  
“PAIRING” flashes on the display.  
5. Operate the Bluetooth audio device and  
set it to the program mode while  
“PAIRING” is flashing.  
Programming a Bluetooth audio device  
which has a PIN code (4 digits)  
1. Using the audio control dial, select the  
pairing program mode  
6. When the programming is completed,  
“
” and “PAIR SUCCESS” are  
“PAIR DEVICE” in the “BT SETUP”  
mode. (Refer to  
“Bluetooth audio device set-up” for  
details.)  
displayed after about 10-30 seconds,  
after which “PAIR SUCCESS”  
continues to be displayed for three  
seconds, and then the unit returns to the  
normal display.  
6-65  
Interior Comfort  
Bluetooth Audio  
NOTE  
l
6. When the programming is completed,  
” and “PAIR SUCCESS” are  
Some Bluetooth audio devices need a  
“
certain amount of time before the “  
”
displayed after about 10-30 seconds,  
after which “PAIR SUCCESS”  
continues to be displayed for three  
seconds, and then the unit returns to the  
normal display.  
symbol is displayed.  
l
If the programming failed, “Err” flashes  
for three seconds.  
l
Programming cannot be performed while  
the vehicle is moving. If you attempt to  
perform programming while the vehicle is  
moving, “PAIR DISABLE” is displayed.  
If seven Bluetooth audio devices have  
already been programmed to the vehicle,  
programming cannot be performed and  
“MEMORY FULL” is displayed. Delete  
one programmed device to program  
another one.  
NOTE  
l
If pairing cannot be completed, try “1234”  
instead. Refer to the owner's manual of  
your mobile device for the right PIN code.  
Some Bluetooth audio devices need a  
l
l
certain amount of time before the “  
”
symbol is displayed.  
l
l
If the programming failed, “Err” flashes  
for three seconds.  
Programming cannot be performed while  
the vehicle is moving. If you attempt to  
perform programming while the vehicle is  
moving, “PAIR DISABLE” is displayed.  
If seven Bluetooth audio devices have  
already been programmed to the vehicle,  
programming cannot be performed and  
“MEMORY FULL” is displayed. Delete  
one programmed device to program  
another one.  
Programming a Bluetooth audio device  
which does not have a PIN code (4  
digits)  
1. Using the audio control dial, select the  
pairing program mode  
l
“PAIR DEVICE” in the “BT SETUP”  
mode. (Refer to  
“Bluetooth audio set up” for details.)  
2. Press the audio control dial to  
determine the mode.  
Changing the link to a Bluetooth audio  
device  
After “ENTER PIN” is displayed on  
the information display for three  
seconds, “PIN 0000” is displayed and  
the PIN code can be input.  
If several devices have been programmed,  
the Bluetooth unit links the device last  
programmed. If you would like to link a  
different programmed device, it is  
necessary to change the link. The order of  
device priority after the link has been  
changed is maintained even when the  
ignition is switched off (LOCK).  
3. Press the audio control dial while  
“PIN 0000” is displayed.  
“PAIRING” flashes on the display.  
4. Operate the Bluetooth audio device and  
set it to the program mode while  
“PAIRING” is flashing.  
1. Using the audio control dial, select the  
link change mode “LINK CHANGE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth audio device set-up” for  
details.)  
5. As the Bluetooth audio device requires  
a PIN code, input “0000”.  
6-66  
Interior Comfort  
Bluetooth Audio  
2. Press the audio control dial to  
determine the mode.  
6. If the link to the desired device is  
successful, the “ ” symbol is  
displayed again, together with  
“LINK CHANGED”.  
“LINK CHANGED” is displayed for  
three seconds, then it returns to the  
normal display.  
3. The name of the currently linked  
Bluetooth audio device is displayed.  
If no Bluetooth audio device is  
currently linked, the name of the first  
device among the programmed devices  
is displayed.  
NOTE  
l
Some Bluetooth audio devices need a  
certain amount of time before the “  
symbol is displayed.  
4. Turn the audio control dial to select the  
name of the device you would like to  
link.  
”
l
If a hands-free type mobile phone has been  
the most recently programmed device, the  
Bluetooth unit links this device. If you  
would like to use a Bluetooth audio type  
device which has been previously  
Device name 1  
Device name 2  
Device name 3  
programmed to the Bluetooth unit, the link  
must be changed to this device.  
l
If an error occurs while trying to link a  
device, “Err” flashes in the display for  
three seconds, and the display returns to  
“LINK CHANGE”. If this occurs, check the  
programming status of the Bluetooth audio  
device and the location of the device in the  
vehicle (not in the trunk or a metal-type  
box), and then try the link operation again.  
Device selection can also be done using  
voice recognition (page 6-85).  
Device name 4  
Device name 5  
Device name 6  
Device name 7  
l
How to confirm the device currently  
linked  
Switch to the link-change mode. (Refer to  
“Changing the link to a Bluetooth audio  
device”)  
The device name displayed first is the  
device which is currently linked.  
5. Press the audio control dial to select the  
device you would like to link.  
The “ ” symbol disappears, and  
“PAIRING” flashes in the display.  
NOTE  
When “GO BACK” is selected and the audio  
control dial is pressed, the display returns to  
“LINK CHANGE”.  
6-67  
Interior Comfort  
Bluetooth Audio  
Deleting the link to a Bluetooth audio  
device  
5. If a selection other than “GO BACK”  
is made and the audio control dial is  
pressed, “SURE ? NO” is displayed.  
1. Using the audio control dial, select the  
pairing delete mode “PAIR DELETE”  
in the “BT SETUP” mode. (Refer to  
“Bluetooth audio device set-up” for  
details.)  
6. Rotate the audio control dial clockwise  
and switch the display to “SURE ?  
YES”.  
NOTE  
2. Press the audio control dial to  
determine the mode.  
The display changes as follows depending on  
whether the audio control dial is rotated  
clockwise or counterclockwise.  
3. The name of the first device among the  
programmed devices is displayed.  
-Clockwise: “SURE ? YES” displayed  
-Counterclockwise: “SURE ? NO” displayed  
4. Rotate the audio control dial and select  
the name of the programmed device  
you would like to delete.  
7. Press the audio control dial to delete  
the selected device.  
NOTE  
Select “GO BACK” and press the audio  
control dial to return to the “PAIR DELETE”  
display.  
Device name 1  
Device name 2  
Device name 3  
8. “PAIR DELETED” is displayed for  
three seconds after the deletion is  
completed, and then it returns to the  
normal display.  
Device name 4  
Device name 5  
NOTE  
If an error occurs while trying to delete the  
programmed device, “Err” flashes in the  
display for three seconds and the display  
returns to “LINK DELETE”.  
Device name 6  
Device name 7  
Bluetooth audio device information  
display  
1. Using the audio control dial, select the  
pair device information display mode  
“DEVICE INFO” in the “BT SETUP”  
mode. (Refer to  
NOTE  
“Bluetooth audio device set-up” for  
details.)  
Only the names of programmed devices can be  
displayed. If only one device is programmed,  
only the name for this device is displayed.  
2. Press the audio control dial to  
determine the mode.  
6-68  
Interior Comfort  
Bluetooth Audio  
3. The name of the Bluetooth unit device  
is displayed.  
2. Turn on the Bluetooth audio device's  
power.  
Make sure that the “ ” symbol is  
displayed in the information display.  
The symbol is not displayed if an  
unprogrammed Bluetooth audio device  
is being used or the vehicle's Bluetooth  
unit has a malfunction.  
4. Rotate the audio control dial to select  
the information for the Bluetooth unit  
which you would like to view.  
Device name  
BT address  
NOTE  
Some Bluetooth audio devices need a certain  
amount of time before the “ ” symbol is  
displayed.  
3. Press the AUX button to switch the  
Bluetooth audio mode to “BT Audio”.  
4. The audio recorded to the Bluetooth  
audio device begins playback.  
NOTE  
NOTE  
l
When “GO BACK” is selected and the audio  
control dial is pressed, the display returns to  
“DEVICE INFO”.  
If the Bluetooth audio device does not begin  
playback, press the Play/Pause button  
(
).  
l
If the mode is switched from Bluetooth  
audio mode to another mode (radio mode),  
audio playback from the Bluetooth audio  
device stops.  
qHow to Use the Bluetooth Audio  
System  
Switching to Bluetooth audio mode  
l
If a call is received on a hands-free mobile  
phone during playback from the Bluetooth  
audio device, the playback is stopped.  
Playback from the Bluetooth audio device  
resumes after the call ends.  
To listen to music or voice audio recorded  
to a Bluetooth audio device, switch to the  
Bluetooth audio mode to operate the  
audio device using the audio system  
control panel.  
Any Bluetooth audio device must be  
programmed to the vehicle's Bluetooth  
unit before it can be used. (Refer to  
“Bluetooth audio device programming”)  
Playback  
1. To listen to a Bluetooth audio device  
over the vehicle's speaker system,  
switch the mode to Bluetooth audio  
mode. (Refer to  
1. Switch the ignition to ACC or ON.  
“Switching to Bluetooth audio mode”)  
2. To stop playback, press the Play/Pause  
button ( ).  
3. Press the button again to resume  
playback.  
6-69  
Interior Comfort  
Bluetooth Audio  
Selecting a file (track)  
Short-press the track down button ( ) or  
turn the file dial counterclockwise: Selects  
the beginning of the current file (track).  
Short-press the track up button ( ) or  
turn the file dial clockwise: Selects the  
next file (track).  
6-70  

Related Topics

Interior Comfort
Climate Control System Audio System Bluetooth Hands-Free Interior Equipment

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot