2010-2013 Mazda 3 4 Door Interior Comfort -> Interior Equipment User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Interior Comfort -> Interior Equipment for Your Mazda 3 4 Door Second Generation (2010-2013)

Interior Comfort  
Interior Equipment  
Sunvisors  
Interior Lights  
When you need a sunvisor, lower it for  
use in front or swing it to the side.  
qIlluminated Entry System  
When the illuminated entry system  
operates, the overhead light (switch is in  
the DOOR position) turns on for:  
Sunvisor  
l
About 30 seconds after the driver's  
door is unlocked and the ignition key is  
removed (without advanced key) or the  
ignition is switched off (with advanced  
key).  
l
About 15 seconds after all doors are  
closed.  
(With Advanced key)  
About 5 seconds after all doors are  
closed when the advanced key is  
outside of the vehicle.  
qVanity Mirrors  
l
About 15 seconds after the ignition is  
To use the vanity mirror, lower the  
sunvisor.  
If your vehicle is equipped with a vanity  
mirror light, it will illuminate when you  
open the cover.  
switched off (LOCK) and the ignition  
key removed (without advanced key)  
with all doors closed.  
The light also turns off when:  
l
The ignition is switched on and all  
doors are closed.  
The driver's door is locked.  
l
NOTE  
l
Battery saver  
If any door is left opened, the light turns off  
after about 30 minutes to save the battery.  
The light turns on again when the ignition  
is switched on, or when any door is opened  
after all doors have been closed.  
l
The operation of the illuminated entry  
system can be changed.  
Refer to Personalization Features on page  
10-10.  
6-93  
Interior Comfort  
Interior Equipment  
qOverhead Lights  
qMap Lights  
Front  
The map lights are switched on or off by  
pressing the switches.  
Rear  
qLuggage Compartment Light (5  
Door)  
Switch  
Position  
Overhead Lights  
Light off  
Switch  
Luggage Compartment Light  
Position  
l
Light is on when any door is open  
Light is on or off when the  
illuminated entry system is on  
l
Light off  
Light on  
Light on when the liftgate is open  
6-94  
Interior Comfort  
Interior Equipment  
Information Display  
Clock  
Audio display  
Without multi  
information  
display  
Ambient temperature display Climate control display Hands-free display  
Audio display  
With multi  
information  
display  
Climate control display  
Clock adjustment  
buttons  
qInformation Display Functions  
The information display has the following functions:  
Clockí  
l
Ambient Temperature Display (Outside Temperature Display)í  
Climate Control Display  
l
l
l
Audio Display  
Bluetooth Hands-Free Displayí Refer to Bluetooth Hands-Free on page 6-71.  
l
íSome models.  
6-95  
Interior Comfort  
Interior Equipment  
qClockí  
qOutside Temperature Display  
(Fully Automatic Type)  
The time is displayed when the ignition is  
switched to ACC or ON.  
When the ignition switch is in the ON  
position, the ambient temperature is  
displayed.  
Time setting  
1. Turn the ignition switch to the ACC or  
ON position.  
NOTE  
Under the following conditions, the ambient  
temperature display may differ from the actual  
ambient temperature depending on the  
surroundings and vehicle conditions:  
2. Adjust the time using the time setting  
buttons (  
,
).  
The hours advance while the time  
setting button ( ) is pressed.  
l
Significantly cold or hot temperatures.  
l
The minutes advance while the time  
setting button ( ) is pressed.  
Sudden changes in ambient temperature.  
l
The vehicle is parked.  
l
The vehicle is driven at low speeds.  
Time resetting  
1. Turn the ignition switch to the ACC or  
ON position.  
qClimate Control Display  
The climate control system status is  
displayed. To operate the climate control  
system, refer to “Climate Control System”  
(page 6-2).  
2. Press the :00 button.  
3. When the button is pressed, the time  
will be reset as follows:  
(Example)  
12:01―12:29→12:00  
12:30―12:59→1:00  
qAudio Display  
The audio system status is displayed. To  
operate the audio system, refer to  
“Audio System” (page 6-16).  
NOTE  
When the :00 button is pressed, the seconds  
will start at “00”.  
6-96  
íSome models.  
Interior Comfort  
Interior Equipment  
í
Multi Information Display  
Without navigation system  
With navigation system  
Clock adjustment  
buttons  
Steering switch  
Steering Switch  
Enter (up/down) switch  
Left switch  
Navi switch  
Right switch  
INFO switch  
BACK switch  
íSome models.  
6-97  
Interior Comfort  
Interior Equipment  
Switch  
Function  
Enter (up/down) switch Used to select a menu and change numbers. Select up or down and press enter.  
Right switch/Left  
switch  
Used to select digits when setting numbers.  
Navi switch  
(With navigation sys-  
tem)  
Press to switch the system to the navigation system screen.  
BACK switch  
INFO switch  
Press during SETTINGS to return to the previous screen.  
Press to switch to the multi information display.  
Switches the setting display in the order of Trip computer  
(average fuel economy/average vehicle speed) → Trip computer  
(current fuel economy/distance-to-empty) → Audio display → Settings  
(reset averages/maintenance/preferences). Each time the switch is pressed, the multi  
information display cycles through.  
qMulti Information Display Functions  
Function name  
Clock  
Details  
See page  
6-99  
6-99  
Constant display of time.  
Outside temperature Constant display of ambient temperature.  
display  
Audio display  
Displays the audio operation status. Displayed when the INFO switch is 6-100  
pressed.  
Trip computer  
Displays the average fuel economy, average vehicle speed, current fuel  
economy, and distance-to-empty. Displayed when the INFO switch is  
pressed.  
6-100  
Maintenance monitor Notification of periodic inspection and tire rotation period  
6-102  
6-106  
Warning indicator  
Settings  
Notification of the need to take caution  
Used to change the multi information display settings. Displayed when the 6-106  
INFO switch is pressed.  
Navigation system  
Refer to the separate manual  
6-98  
Interior Comfort  
Interior Equipment  
NOTE  
l
qClock  
Daylight saving time is not reflected in the  
time zone displayed.  
The time is displayed when the ignition is  
switched to ACC or ON.  
l
l
The clock does not display if there is no  
GPS signal reception.  
If the battery cables are disconnected and  
then reconnected, the clock does not  
operate until a GPS signal is received. Do  
not place objects on the dashboard,  
otherwise the clock may be unable to  
receive the GPS signal normally.  
qOutside Temperature Display  
When the ignition switch is switched ON,  
the ambient temperature is displayed.  
Time setting  
Refer to Clock on page 6-96.  
Time resetting  
Refer to Clock on page 6-96.  
With navigation system  
Time zone switching  
1. Press the INFO switch until the  
SETTINGS screen is displayed.  
2. Select PREFERENCES by pressing the  
Enter (up/down) switch up or down,  
and then press the Enter (up/down)  
switch.  
NOTE  
l
Under the following conditions, the ambient  
temperature display may differ from the  
actual ambient temperature depending on  
the surroundings and vehicle conditions:  
3. Select TIME ZONE by pressing the  
Enter (up/down) switch up or down,  
and then press the Enter (up/down)  
switch.  
l
Significantly cold or hot temperatures.  
l
Sudden changes in ambient temperature.  
l
The vehicle is parked.  
l
The vehicle is driven at low speeds.  
4. Select the desired time zone by  
pressing the Enter (up/down) switch up  
or down, and then press the Enter (up/  
down) switch.  
l
When the ignition is switched to ACC,  
“- - -” is displayed.  
6-99  
Interior Comfort  
Interior Equipment  
Average fuel economy  
qAudio Display  
This mode displays the average fuel  
economy by calculating the total fuel  
consumption and the total traveled  
distance since purchasing the vehicle, re-  
connecting the battery after disconnection,  
or resetting the data. The average fuel  
economy is calculated and displayed  
every minute.  
Press the INFO switch until the AUDIO  
screen is displayed. The audio operation  
status is displayed.  
To operate the audio system, refer to  
“Audio System” (page 6-16).  
qTrip Computer  
The trip computer can display the  
following:  
l
The average fuel economy.  
The average vehicle speed.  
l
l
The current fuel economy.  
The approximate distance you can  
l
travel on the available fuel.  
1. Switch the ignition ON.  
2. Press the INFO switch until the trip  
computer screen is displayed.  
If you have any problems with your trip  
computer, consult an Authorized Mazda  
Dealer.  
To erase the displayed data, Refer to  
Settings on page 6-106.  
After erasing, the calculated average fuel  
economy in - - - L/100 km (- - - mpg) is  
displayed after 1 minute has elapsed.  
Average vehicle speed  
This mode displays the average vehicle  
speed by calculating the distance and the  
time traveled since connecting the battery  
or resetting the data.  
6-100  
Interior Comfort  
Interior Equipment  
The average vehicle speed will be  
calculated every 10 seconds.  
Distance-to-empty  
This mode displays the approximate  
distance you can travel on the remaining  
fuel based on the fuel economy.  
The distance-to-empty will be calculated  
every second.  
To erase the displayed data, Refer to  
Settings on page 6-106.  
After erasing, the calculated average  
vehicle speed in - - - km/h (- - - mph) is  
displayed after 1 minute has elapsed.  
NOTE  
l
Even though the distance-to-empty display  
Current fuel economy  
may indicate a sufficient amount of  
remaining driving distance before refueling  
is required, refuel as soon as possible if the  
fuel gauge needle nears E or the low fuel  
warning light illuminates.  
This mode displays the current fuel  
economy by calculating the amount of  
fuel consumption and the distance  
traveled.  
The current fuel economy will be  
calculated every 2 seconds.  
l
The display will not change unless you add  
more than approximately 5 L {6 US qt, 5  
lmp qt} of fuel.  
l
When the ignition is switched to ACC,  
“- - -” is displayed.  
When you've slowed to about 5 km/h (3  
mph), - - - L/100 km (- - - mpg) will be  
displayed.  
6-101  
Interior Comfort  
Interior Equipment  
5. Select SET and press the Enter (up/  
down) switch.  
qMaintenance Monitor  
The periodic inspection and tire rotation  
period notification can be displayed by  
turning the Maintenance Monitor on.  
NOTE  
l
This function is inoperable while the  
vehicle is being driven.  
l
(With navigation system)  
If the battery cables are disconnected and  
then reconnected, the SERVICE DUE item  
in the MAINTENANCE setting cannot be  
done until the clock resets after receiving a  
GPS signal. Perform this setting after the  
clock resumes operation.  
NOTE  
l
For the service due notification, either the  
Initial setting method  
number of days or distance can be set.  
When selecting one of the two settings, the  
setting not selected is set to the initial value  
automatically.  
1. Press the INFO switch until the  
SETTINGS screen is displayed.  
2. Select MAINTENANCE by pressing  
the Enter (up/down) switch up or  
down, and then press the Enter (up/  
down) switch.  
l
Because tire rotation can only be set  
according to distance, the screen for setting  
distance is displayed when SET is selected.  
6. Select DISTANCE or DAYS and press  
the Enter (up/down) switch. The screen  
for setting the distance or days to the  
next maintenance period is displayed.  
3. Select the item you want to turn on  
(TIRE ROTATION or SERVICE DUE)  
by pressing the Enter (up/down) switch  
up or down, and then press the Enter  
(up/down) switch.  
4. Press the Enter (up/down) switch.  
6-102  
Interior Comfort  
Interior Equipment  
7. Select a digit using the Right switch/  
Left switch, and press the Enter (up/  
down) switch up or down to change the  
value of the digit. If there is no need to  
change a digit, leave it as it is and press  
the Enter (up/down) switch.  
NOTE  
l
If the Enter (up/down) switch is pressed  
while a message is displayed, it will no  
longer be displayed the next time the engine  
is started.  
l
After the vehicle is serviced and the  
remaining days/distance is reset, the  
message for the next maintenance period  
will be displayed when the remaining  
distance or days to the next maintenance  
period approaches 0 (displays when engine  
is started).  
l
If there are multiple tire rotation periods or  
service due, they are displayed according to  
their order.  
l
If there is more than one servicing due  
deadline with one past due and the other  
approaching, only the one which is past due  
will be displayed.  
NOTE  
The initial setting values are displayed  
corresponding to the maintenance schedule  
(except Puerto Rico). For each regional  
maintenance schedule, Refer to Scheduled  
Maintenance on page 8-3.  
Message display  
When the remaining days or the distance  
approaches 0, a message is displayed for 5  
seconds each time the ignition is switched  
to ACC or ON.  
6-103  
Interior Comfort  
Interior Equipment  
Display period  
Item  
Start of message display  
End of message display  
TIRE ROTATION  
When remaining distance is less  
than 500 km (300 mile)  
Distance exceeds 500 km (300 mile) from  
remaining distance of 0 km  
SERVICE DUE  
When remaining distance is less  
than 500 km (300 mile), or  
remaining days are less than 15  
(which ever comes first)  
Distance exceeds 500 km (300 mile) from  
remaining distance of 0 km, or 15 days have  
elapsed since remaining days reached “0” days  
(which ever comes first)  
Message display  
Item  
Timing  
Displayed message  
TIRE ROTATION  
Remaining distance:  
500 km (300 mile) to -500 km (-300 mile)  
TIRE ROTATION DUE  
SERVICE DUE  
Remaining distance:  
500 km (300 mile) to 0 km (0 mile)  
SERVICE DUE  
Remaining days: 15 to 0 days  
Remaining distance:  
0 km (0 mile) to -500 km (-300 mile)  
SERVICE OVERDUE  
Remaining days: 0 to 15 days  
Reset method  
3. Select the item you would like to reset  
(TIRE ROTATION or SERVICE DUE)  
by pressing the Enter (up/down) switch  
up or down, and then press the Enter  
(up/down) switch.  
If resetting is performed after a tire  
rotation or periodic inspection has been  
done, a notification of the next  
maintenance period will be displayed  
when the period approaches.  
1. Press the INFO switch until the  
SETTINGS screen is displayed.  
2. Select MAINTENANCE by pressing  
the Enter (up/down) switch up or  
down, and then press the Enter (up/  
down) switch.  
NOTE  
l
The current remaining distance and days is  
displayed.  
l
Even if the remaining distance or days have  
surpassed 0, the display does not display a  
minus (―) and leaves the value at 0.  
4. Press the Enter (up/down) switch.  
6-104  
Interior Comfort  
Interior Equipment  
5. Select SET and press the Enter (up/  
down) switch.  
NOTE  
l
If the settings are changed from the initial  
values, the values which you set are  
displayed, not the initial values.  
Even if the battery is disconnected, the  
remaining distance and days information is  
not erased.  
l
l
If the multi information display is replaced  
or repaired, there is the possibility of the  
remaining distance and days information  
being erased.  
Method for turning the system off  
The maintenance monitor can be turned  
off even after it has been turned on. If you  
want to turn it off, the remaining distance  
and days calculation to the next  
maintenance period is stopped, and a  
message does not display to indicate an  
approaching maintenance period.  
NOTE  
If the SERVICE DUE item has been set, both  
the days and distance can be selected. Because  
the tire rotation item can only be set according  
to distance, the screen for setting distance is  
displayed when SET is selected.  
1. Press the INFO switch until the  
SETTINGS screen is displayed.  
6. The DISTANCE or DAYS screen is  
displayed, and the remaining distance  
and days values return to the values  
previously set. If no changes are  
necessary, press the Enter (up/down)  
switch.  
2. Select MAINTENANCE by pressing  
the Enter (up/down) switch up or  
down, and then press the Enter (up/  
down) switch.  
6-105  
Interior Comfort  
Interior Equipment  
l
l
3. Select the item you want to turn off  
(TIRE ROTATION or SERVICE DUE)  
by pressing the Enter (up/down) switch  
up or down, and then press the Enter  
(up/down) switch.  
RELEASE PARKING BRAKE  
Advanced Keyless Entry System  
related  
l
KEY BATTERY IS LOW  
ADVANCED KEY NOT FOUND  
l
l
MOVE SHIFT LEVER TO P  
STEERING WHEEL LOCK NOT  
l
RELEASED TURN WHEEL LEFT  
AND RIGHT  
DEPRESS BRAKE PEDAL TO  
l
START ENGINE  
DEPRESS CLUTCH PEDAL TO  
l
START ENGINE  
USE AUXILIARY KEY  
l
NOTE  
When more than two warnings occur at the  
same time, indicators are switched at each  
specified time.  
4. Select OFF and press the Enter (up/  
down) switch.  
qSettings  
The following settings can be changed:  
l
Buzzer volume (Ignition key reminder,  
lights-on reminder)  
l
Turn indicator sound  
Distance unit  
l
l
Temperature unit  
Display language  
l
The data for the trip computer average  
fuel economy and the average vehicle  
speed can also be changed.  
To change settings  
qWarning Indicator  
1. Press the INFO switch until the  
SETTINGS screen is displayed.  
The following warning indicators are  
displayed according to necessity. Warning  
indicators are displayed regardless of the  
multi-information display operation.  
2. Select PREFERENCES by pressing the  
Enter (up/down) switch up or down,  
and then press the Enter (up/down)  
switch.  
l
DOOR OPEN (including trunk and the  
liftgate)  
TIGHTEN FUEL CAP (Displayed  
l
3. Select the setting item you want to  
change by pressing the Enter (up/  
down) switch up or down, and then  
press the Enter (up/down) switch.  
when the check fuel cap warning light  
illuminates in the instrument cluster.)  
CHECK TIRE PRESSURE  
l
6-106  
Interior Comfort  
Interior Equipment  
4. Select the desired setting by pressing  
the Enter (up/down) switch up or  
down, and then press the Enter (up/  
down) switch.  
Cup Holder  
WARNING  
Never use a cup holder to hold hot  
liquids while the vehicle is moving:  
Using a cup holder to hold hot liquids  
while the vehicle is moving is  
NOTE  
The buzzer volume for both the ignition key  
reminder and the lights-on reminder is  
changed simultaneously. If you prefer separate  
buzzer volume settings, consult an Authorized  
Mazda Dealer. If separate buzzer volume  
settings have been done at an Authorized  
Mazda Dealer, you will be unable to change  
the settings.  
dangerous. If the contents spill, you  
could be scalded.  
CAUTION  
To reduce the possibility of injury in  
an accident or a sudden stop, keep  
the cup holders closed when they are  
not in use, or when using them for  
storage.  
Resetting the data for the trip computer  
average fuel economy and the average  
vehicle speed  
1. Press the INFO switch until the  
SETTINGS screen is displayed.  
qFront  
To use, open the cover.  
2. Select RESET AVERAGES and press  
the Enter (up/down) switch.  
3. Select FUEL ECONOMY or SPEED,  
and press the Enter (up/down) switch.  
6-107  
Interior Comfort  
Interior Equipment  
qRear  
Bottle Holder  
The rear cup holder is on the rear center  
armrest.  
Bottle holders are on the inside of the  
doors.  
Bottle holder  
CAUTION  
Do not use the bottle holders for  
containers without caps. The  
contents may spill when the door is  
opened or closed.  
6-108  
Interior Comfort  
Interior Equipment  
qGlove Compartment  
Storage Compartments  
To open the glove box, pull the latch  
toward you.  
WARNING  
Keep storage boxes closed when  
driving:  
Driving with the storage boxes open  
is dangerous. To reduce the  
possibility of injury in an accident or  
a sudden stop, keep the storage  
boxes closed when driving.  
CAUTION  
Do not leave lighters or eyeglasses in  
the storage boxes while parked under  
the sun. A lighter could explode or  
the plastic material in eyeglasses  
could deform and crack from high  
temperature.  
qCenter Console  
To open, pull the lower release handle.  
qOverhead Consoleí  
This console box is designed to store  
eyeglasses or other accessories.  
Push and release to open.  
íSome models. 6-109  
Interior Comfort  
Interior Equipment  
Storage trayí  
Press the button to slide the armrest  
frontward.  
The storage tray can be installed to the  
left/right side of the center console.  
Storage tray  
To retract the armrest, slide it completely  
to the rear.  
Using the armrestí  
CAUTION  
Ø When sliding the armrest, be  
careful not to hit a drink cup  
placed in a cup holder and spill its  
contents. Remove cups or other  
drink containers from the cup  
holders before pulling out the  
armrest.  
Ø Before opening the center console,  
store the armrest first. Otherwise,  
the armrest or center console may  
be damaged.  
qCargo Securing Loops (5 Door)  
WARNING  
Make sure luggage and cargo is  
secured before driving:  
Not securing cargo while driving is  
dangerous as it could move or be  
crushed during sudden braking or a  
collision and cause injury.  
6-110 íSome models.  
Interior Comfort  
Interior Equipment  
Use the loops in the luggage compartment  
to secure cargo with a rope or net. The  
tensile strength of the loops is 196 N (20  
kgf, 44 lbf). Do not apply excessive force  
to the loops as it will damage them.  
qRear Coat Hooks  
WARNING  
Never hang heavy or sharp objects on  
the assist grips and coat hooks:  
Hanging heavy or sharp-ended  
objects such as a coat hanger from  
the assist grips or coat hooks is  
dangerous as they can fly off and hit  
an occupant in the cabin if a curtain  
air bag was to deploy, which could  
result in serious injury or death.  
Always hang clothes on the coat hooks  
and the assist grips without hangers.  
qShopping Bag Hook (5 Door)  
The shopping bag hook can be used for  
hanging shopping bags.  
CAUTION  
Coat hook  
Do not hang excessive weight on the  
shopping bag hook as it could be  
damaged.  
Shopping bag hook  
(tensile strength: 3 kg  
(6.6 lb))  
6-111  
Interior Comfort  
Interior Equipment  
Accessory Sockets  
Only use genuine Mazda accessories or  
the equivalent requiring no greater than  
120 W (DC 12 V, 10 A).  
Front  
The ignition switch must be in the ACC  
or ON position.  
To use, press the cover and open it.  
With Seat Warmer  
Rear  
The accessory sockets can be used  
regardless of the position of the ignition  
switch.  
Without Seat Warmer  
6-112  
Interior Comfort  
Interior Equipment  
2. Pass the connection plug cord through  
the cutout of the console and insert the  
plug into the accessory socket.  
CAUTION  
To prevent accessory socket damage  
or electrical failure, pay attention to  
the following:  
Plug  
Ø Do not use accessories that require  
more than 120 W (DC 12 V, 10 A).  
Ø Do not use accessories that are not  
genuine Mazda accessories or the  
equivalent.  
Ø Close the cover when the accessory  
socket is not in use to prevent  
foreign objects and liquids from  
getting into the accessory socket.  
Ø Correctly insert the plug into the  
accessory socket.  
Ø Do not insert the cigarette lighter  
into the accessory socket.  
Noise may occur on the audio  
playback or TV reception depending  
on the device connected to the  
accessory socket.  
NOTE  
To prevent discharging of the battery, do not  
use the socket for long periods with the engine  
off or idling.  
Connecting the accessory socket  
1. Open the lid.  
6-113  
6-114  

Related Topics

Interior Comfort
Climate Control System Audio System Bluetooth Audio Bluetooth Hands-Free

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot