2013-2016 Mazda Cx-5 SUV Owner Maintenance -> Engine Oil User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Owner Maintenance -> Engine Oil for Your Mazda Cx-5 SUV First Generation (2013-2016)

Maintenance and Care  
Owner Maintenance  
Only use SAE 0W-20 oil  
Engine Oil  
Certified For Gasoline Enginesby the  
American Petroleum Institute (API).  
Oil with this trademark symbol conforms  
to the current engine and emission system  
protection standards and fuel economy  
requirements of the International  
NOTE  
Changing the engine oil should be performed  
by an Authorized Mazda Dealer.  
Refer to Introduction (page 6-2) for owner's  
responsibility in protecting your investment.  
Lubricant Standardization and Approval  
Committee (ILSAC), comprised of U.S.  
and Japanese automobile manufacturers.  
qRecommended Oil  
U.S.A. and CANADA  
Use SAE 0W-20 engine oil.  
Mazda Genuine Oil is used in your Mazda  
vehicle. Mazda Genuine 0W-20 Oil is  
required to achieve optimum fuel  
economy.  
20  
–40  
–20  
0
10  
30 40  
–30  
–10  
–40 –20  
80 100  
0
20  
40 60  
For maintenance service, Mazda  
recommends Mazda Genuine Parts and  
Castrol® (U.S.A. only).  
Except U.S.A. and CANADA  
Use SAE 5W-30 engine oil.  
Oil container labels provide important  
information.  
A chief contribution this type of oil makes  
to fuel economy is reducing the amount of  
fuel necessary to overcome engine  
friction.  
For maintenance service, Mazda  
recommends Mazda Genuine Parts and  
Castrol® (Mexico only).  
(ILSAC)  
6-27  
Maintenance and Care  
Owner Maintenance  
(ILSAC)  
(Mexico)  
Use SAE 5W-30 engine oil. If SAE 5W-  
30 engine oil is not available, use SAE  
5W-20 engine oil.  
The quality designation SM, or ILSAC  
must be on the label.  
–40  
–20  
0
20  
10  
30 40  
–30  
–10  
–40 –20  
0
20  
40 60  
80 100  
6-28  
Maintenance and Care  
Owner Maintenance  
qVehicle Engine Control Unit Reset Procedure  
NOTE  
This procedure is intended for vehicles with the engine oil flexible maintenance setting selected.  
After replacing the engine oil, have a repair shop such as an Authorized Mazda Dealer  
perform the initialization (engine oil data resetting) of the recorded value. If the value  
recorded by the computer is not initialized, the wrench indicator light may not turn off or it  
may turn on earlier than normal.  
NOTE  
The initialization (engine oil data resetting) of the recorded value can be performed using the  
following procedure:  
1. Switch the ignition OFF.  
2. Switch the ignition ON with the selector pressed, and press and hold the selector for about 5  
seconds until the master warning light  
flashes.  
Selector  
3. After the master warning light  
flashes for several seconds, the initialization is completed.  
6-29  

Related Topics

Popular Owner Manuals