2025-2026 Mercedes CLA 4 Door General notes -> National information for components relevant to radio regulation User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

General notes -> National information for components relevant to radio regulation for Your Mercedes CLA 4 Door Third Generation (2025-2026)

If you modify component parts of these high-
voltage components or touch damaged com-
ponent parts, you may be electrocuted.
High voltage components may be damaged in
an accident, although the damage may not be
visible.
#
Never perform modications to compo-
nent parts of high-voltage components.
#
Never touch damaged component parts
of high-voltage components.
#
Never touch component parts of high-
voltage components aer an accident.
Vehicles with a 48 V on-board electrical system
contain high-voltage components. These compo-
nents are marked with a high-voltage label:
Example
All work on high-voltage components must be car-
ried out at a qualied specialist workshop.
Fitting the license plate to the front license plate
holder
*
NOTE Malfunctions and system failures
due to incorrect mounting of the license
plate on the front license plate holder
If the license plate is incorrectly mounted on
the front license plate holder, sensors, cam-
eras or driving and safety systems may mal-
function or fail.
Observe the following points when mounting
the license plate on the front license plate
holder:
#
Mount the license plate directly on the
license plate holder without advertising
media or other holders.
#
Mount the license plate so that it does
not protrude above or to the side of the
license plate adapter.
National information for components relevant to
radio regulation
Information on crossing national borders
You must observe the radio regulations for the
country in which you are currently operating your
vehicle.
General notes
25
USA: "Radio based devices of this vehicle comply
with Part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions: 1) These devi-
ces may not cause harmful interference, and 2)
These devices must accept any interference
received, including interference that may cause
undesired or modications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment."
Canada: "This vehicle contains licence-exempt
transmitter(s)/receiver(s) that comply with Inno-
vation, Science and Economic Development Can-
ada’s licence-exempt RSS(s). Operation is subject
to the following two conditions: (1) These devices
may not cause interference. (2) These devices
must accept any interference, including interfer-
ence that may cause undesired operation of the
devices." "Les émetteurs/récepteurs dans cette
véhicule sont conforme aux CNR d’Innovation,
Sciences et Développement économique Canada
applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux con-
ditions suivantes : 1) Ces appareils ne doivent pas
produire de brouillage; 2) Ces appareils doivent
accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en com-
promettre le fonctionnement."
Diagnostics connection
The diagnostics connection is a technical inter-
face in the vehicle. It is used, for example, during
repair and maintenance work or for reading out
vehicle data in a specialist workshop. Diagnostic
devices should therefore only be connected in a
qualied specialist workshop.
&
WARNING Risk of accident due to con-
necting devices to the diagnostics con-
nection
If you connect devices to the diagnostics con-
nection of the vehicle, the function of vehicle
systems and operating safety may be
impaired.
#
For safety reasons, we recommend that
you use and connect only products
approved by an authorized Mercedes-
Benz Service Center.
&
WARNING Risk of accident due to objects
in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardizes the operating and road safety
of the vehicle.
#
Stow all objects in the vehicle securely
so that they cannot get into the driver's
footwell.
#
Always install the oor mats securely
and as prescribed in order to ensure that
there is always sucient room for the
pedals.
#
Do not use loose oor mats and do not
place oor mats on top of one another.
*
NOTE Battery discharging from using devi-
ces connected to the diagnostics connec-
tion
Using devices at the diagnostics connection
drains the battery.
#
Check the charge level of the battery.
26
General notes

Related Topics

Popular Owner Manuals