281
*
NOTE
Damage due to engaging park position
j while the vehicle is
rolling
If you shift the transmission into park position j while the vehicle is
rolling, the transmission may be damaged.
#
If the vehicle is rolling, do not open a door.
#
Only engage the park position j when the vehicle is station‐
ary.
#
Observe the notes on parking the vehicle (/page310).
#
Depress the brake pedal until the vehicle comes to a standstill.
#
When the vehicle is stationary, press the button 1.
When the transmission position display j is shown, park position is
engaged. If the transmission position display j is not shown, apply the
parking brake and secure the vehicle to prevent it from rolling away.
%
Depending on the respective situation, it may take a short while
until j is engaged. Therefore, always pay attention to the trans‐
mission position display.
PARK POSITION j WILL BE ENGAGED AUTOMATICALLY IF ONE OF THE
FOLLOWING CONDITIONS IS MET:
R
You switch the stationary vehicle off in transmission position h or k.
R
You open the driver's door when the vehicle is stationary in transmission
position h or k.
R
You switch off the vehicle when coasting to a stop in transmission posi‐
tion h or k, and bring the vehicle to a standstill.
R
You shift to transmission position i with the vehicle coasting to a stop,
bring the vehicle to a standstill and open the driver's door when the
vehicle is at a standstill.
R
It is imperative that park position j is engaged automatically for the
vehicle.
%
To manoeuvre with the driver's door open, open the driver's
door while the vehicle is at a standstill and engage transmission
position h or k again.
G-Class - Owner's Manual
Driving and parking Transmission
F465 0034 02