Get General notes -> Declarations of conformity and notes on driving in different countries Guide for Mercedes GLA SUV Second Generation (2020-2026)

High voltage components may be damaged in

an accident, although the damage may not be

visible.

Never perform modications to compo-

nent parts of high-voltage components.

Never touch damaged component parts

of high-voltage components.

Never touch component parts of high-

voltage components aer an accident.

Vehicles with a 48 V on-board electrical system

contain high voltage components. These compo-

nents are marked with a high voltage label:

Example

All work on high voltage components must be car-

ried out at a qualied specialist workshop.

Fitting the licence plate onto the front licence

plate bracket

NOTE Malfunctions and system failures

due to incorrect assembly of the licence

plate on the front licence plate holder

If the licence plate is incorrectly assembled on

the front licence plate holder, sensors, cam-

eras or driving and safety systems may mal-

function or fail.

Observe the following points when assembling

the licence plate on the front licence plate

holder:

Assemble the licence plate directly on

the licence plate holder without advertis-

ing media or other holders.

Assemble the licence plate so that it

does not protrude above or to the side of

the licence plate adapter.

Declarations of conformity and notes on driving

in dierent countries

Electromagnetic compatibility

The electromagnetic compatibility of the vehicle

components has been checked and certied

according to the currently valid version of Regula-

tion UN-R 10.

General notes

F247 0074 02

Country-specic information for regulatory radio

components

Notes when crossing national borders

You must observe the radio regulatory provisions

for the country in which you are currently driving

when operating the vehicle.

Wireless vehicle components

Only for EU and EFTA countries and countries

that recognise the EU manufacturer's declaration

of conformity:

The following information applies to all wireless

components of the vehicle and of the information

systems and communication devices integrated in

the vehicle:

The manufacturers of the wireless components

ensure that all wireless components installed in

the vehicle comply with Directive 2014/53/EU.

The full texts of the EU declarations of conformity

are available at the following web address:

ets/

ece-row/baix/cars/certicates-of-conformity/

en_GB/

You can obtain further information from a

Mercedes-Benz service centre.

For Israel only:

It is prohibited to make any change to a vehicle-

installed radio component that could aect the

wireless specications of the device, including

soware changes, replacement of the original

antenna, or adding the option to connect the

device to an external antenna, without rst obtain-

ing approval from the Communica-tions Ministry,

because of concern about wireless interference.

For the United Kingdom only:

The following information applies to all wireless

components of the vehicle and of the information

systems and communication devices integrated in

the vehicle:

The manufacturers of the radio components

declare that all radio equipment installed in the

vehicle is in compliance with the relevant statu-

tory requirements. The full texts of the declara-

tions of conformity are available at the following

web address:

General notes

F247 0074 02

ets/

ece-row/baix/cars/certicates-of-conformity/

en_GB/

For Brazil only:

Note on two-way radio systems in the vehicle:

These systems are not protected against harmful

interference and must not cause interference in

properly approved systems.

For Jamaica only:

All wireless vehicle components have received

type approval from the SMA.

For Nigeria only:

Connection and use of the radio communications

equipment in this vehicle is permitted by the

Nigerian Communications Commission

For Russia only:

The manufacturers of the wireless components

installed in the vehicle hereby declare that all

wireless components installed in the vehicle com-

ply with the technical regulations for two-way

radios. You can obtain further information from a

Mercedes-Benz service centre.

For Ukraine only:

General notes

F247 0074 02

The manufacturers of the wireless components

installed in the vehicle hereby declare that the

wireless components installed in the vehicle com-

ply with the technical regulations for two-way

radios. You can obtain further information from a

Mercedes-Benz service centre.

Jack

Only for EU and EFTA countries and countries that

recognize the EU manufacturer's Declaration of

Conformity:

CE Declaration of Conformity

Copy and translation of the original Declaration of

Conformity:

EC Declaration of Conformity

The signatory, as a representative

Manufacturer:

BRANO a.s.

747 41 Hradec nad Moravicí, Opavská 1000,

Czech Republic

ID No.: 64-387-5933

VAT Reg. No.: CZ64-387-5933

declares, as our sole responsibility, that the prod-

uct:

2. a)

Description:

Jack

Type, number:

A) A 164 580 02 18, A 166 580 01 18

B) A 240 580 00 18

C) A 639 580 02 18

D) A 639 580 03 18

E) A 910 580 00 00

F) A 247 580 00 00, A 293 580 00 00

G) A 247 580 01 00, A 293 580 01 00

H) A 247 580 02 00, A 293 580 02 00

Manufacture year: 2022

Fulls all relevant conditions

Directive No. 2006/42/EC

Description and intended use:

The sole intended use of the jack is raising the

specied vehicle in accordance with the operating

instructions axed to the jack.

Reference data of the harmonised standards or

specications

ISO 4063, EN ISO 14341-A, AS 2693, DBL

8230.10, DBL 7382.20, DBL 7392.10, DBL

8451.15, MBN 10435,

The technical documentation of the product is

stored at the manufacturer's plant. Representa-

tive for compilation of the technical documenta-

tion: Director of the Technical Department Brano

a.s.

Hradec nad Moravicí

City

14/03/2022

Date

Dipl. Engineer Michal Koberský

General notes

F247 0074 02

55-080 Pietrzykowice

Poland (1)

Hereby declare that the product

Electric air pump (2)

Models: (3)

A0005838505 A0005839205

complies with all essential requirements of the

directives listed opposite (4)

2006/42/EC (EC Machinery Directive)

2014/30/EU (EC EMC Directive)

2000/14/EG & 2005/88/EG (EC noise emis-

sions)

2011/65/EU & 2015/863/EU (RoHS)

Authorised person for the compilation of technical

documentation according to Annex VII A of Direc-

tive 2006/42/EC

Aircom Automotive Sp. z o.o. Sp.k.

Dominik Gschwender (5)

ul. Fabryczna 20B

55-080 Pietrzykowice

Poland

Applied harmonised standards (6)

DIN EN 60204-1: 2019-06

DIN EN 60335-1: 2020-08

DIN EN 1012-1: 2011-02

DIN EN 55012: 2010-04

DIN EN 50498: 2011-04

EN 50498:2010

DIN EN ISO 12100:2011-03

DIN EN ISO 3744:2011-02

DIN EN ISO 2151:2009-01

DIN EN ISO 4871:2009-11

DIN EN ISO 13732-1:2008-12

Other technical standards and specications

applied

None (7)

Pietrzykowice, 06.07.2021

[Signature, D. Gschwender]

Dominik Gschwender, general management

Note: this declaration loses its validity if technical

or operational changes are made without the con-

sent of the manufacturer.

For the United Kingdom only:

Copy and translation of the original declaration of

conformity:

UKCA - Declaration of conformity UKCA

We,

Aircom Automotive Sp. z o.o. Sp.k.

ul. Fabryczna 20B

55-080 Pietrzykowice

Poland

Herby declare that the product model:

Electric air compressor

A0005838505 A0005839205

Is in conformity with the requirements of following

regulations:

Supply of Machinery (safety) Regulations 2008

Electromagnetic Compatibility Regulations 2016

General notes

F247 0074 02

Noise Emission in the Environment by Equipment

for use Outdoors Regulations 2001

The Restriction of the Use of Certain Hazardous

Substances in Electrical and Electronic Equipment

Regulations 2012

Ref. No. Title Edition/date

EN 60204-1 Safety of

machinery –

Electrical

equipment of

machines

2019-06

EN 60335-1 Household

and similar

electrical

appliances

2020-08

Ref. No. Title Edition/date

EN 1012-1 Vehicles,

boats and

internal com-

bustion

engines –

Radio disturb-

ance charac-

teristics

2011-02

EN 50498 Electromag-

netic compat-

ibility (EMC) –

Product family

standard for

aermarket

electronic

equipment in

vehicles

2011-04

EN ISO

12100

Safety of

machinery –

General prin-

ciples for

design

2011-03

Ref. No. Title Edition/date

EN ISO 3744 Acoustics –

Determination

of sound

power levels

and sound

energy levels

of noise sour-

ces using

sound pres-

sure

2011-02

EN ISO 2151 Acoustics –

Noise test

code for com-

pressors and

vacuum

pumps

2009-01

General notes

F247 0074 02

General notes -> Declarations of conformity and notes on driving in different countries for Your Mercedes GLA SUV Second Generation (2020-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals