2020-2026 Mercedes GLA SUV General notes -> Operating safety User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

General notes -> Operating safety for Your Mercedes GLA SUV Second Generation (2020-2026)

Activating on-demand feature using Mercedes me
Requirements
R
The vehicle has a wireless connection.
R
The vehicle is linked to the Mercedes me user
account.
Ordering and activating on-demand feature
#
Add the desired on-demand feature for the
vehicle to the shopping basket in the
Mercedes me Store.
#
Complete the order.
The on-demand feature is activated when
operating the vehicle.
Speeding up activation
#
Switch the vehicle o and lock it.
#
Unlock the vehicle aer about two minutes
and switch on the vehicle.
The on-demand feature has been activated.
For some features, a notication also appears
in the vehicle's multimedia system.
If the activation was not successful, repeat the
process.
Operating safety
&
WARNING Risk of accident due to mal-
functions or system failures
If you do not have the prescribed service/
maintenance work or any required repairs car-
ried out, this could result in malfunctions or
system failures.
#
Always have the prescribed service‑ and
maintenance work or any required
repairs carried out in a qualied work-
shop.
&
WARNING Risk of accident or injury due
to improper modications to electronic
components
Modications to electronic components, their
soware or wiring can impair their functional-
ity and/or the functionality of other networked
components or safety-relevant systems.
This can endanger the vehicle's operating
safety.
#
You must not tamper with wiring, elec-
tronic components, or their soware.
#
Always have work on electrical and elec-
tronic devices carried out at a qualied
specialist workshop.
If you modify the on-board electronics, the gen-
eral operating permit is rendered invalid.
Observe the "On-board electronics" section in
"Technical data".
&
WARNING Risk of re due to ammable
material coming into contact with hot
parts of the exhaust system
If combustible materials, e.g. leaves, grass or
twigs, come into contact with hot parts of the
exhaust system, they may ignite.
#
When driving o-road or on unpaved sur-
faces, check the underside of the vehicle
at regular intervals.
#
In particular, remove any trapped parts
of plants or other ammable material.
78
General notes
F247 0074 02
#
If damage should occur, immediately
inform a qualied specialist workshop.
*
NOTE Damage to the vehicle due to driv-
ing too fast and due to impacts to the
vehicle underbody or suspension compo-
nents
In the following situations, in particular, there
is a risk of damage to the vehicle:
R
the vehicle becomes grounded, e.g. on a
high kerb or an unpaved road
R
the vehicle is driven too fast over an obsta-
cle, e.g. a kerb, speed bump or pothole
R
a heavy object strikes the underbody or
suspension components
In situations such as these, damage to the
body, underbody, suspension components,
wheels or tyres may not be visible. Compo-
nents damaged in this way can unexpectedly
fail or, in the case of an accident, may no lon-
ger absorb the resulting force as intended.
If the underbody panelling is damaged, am-
mable materials such as leaves, grass or twigs
can collect between the underbody and the
underbody panelling. These materials may
ignite if they come into contact with hot parts
of the exhaust system.
#
Have the vehicle checked and repaired
immediately at a qualied specialist
workshop.
or
#
If driving safety is impaired while con-
tinuing your journey, pull over and stop
the vehicle immediately, while paying
attention to road and trac conditions,
and contact a qualied specialist work-
shop.
Plug-in hybrid
Hybrid vehicles have a combustion engine and at
least one electric motor. The energy supply for
operating the vehicle electrically is provided by
the high-voltage on-board electrical system.
&
DANGER Risk of death and re due to
modied and/or damaged components of
the high-voltage on-board electrical sys-
tem
The vehicle's high-voltage on-board electrical
system is under high voltage. If you modify
component parts in the vehicle's high-voltage
on-board electrical system or touch damaged
component parts, you may be electrocuted. In
addition, modied and/or damaged compo-
nents may cause a re.
In the event of an accident or impact to the
underbody, components of the high-voltage
on-board electrical system may be damaged
although the damage is not visible.
#
Never make any modications to the
high-voltage on-board electrical system.
#
Do not switch on or use the vehicle if its
high-voltage on-board electrical system
components have been modied or dam-
aged.
General notes
79
F247 0074 02
#
Never touch damaged components of
the high-voltage on-board electrical sys-
tem.
#
Aer an accident, do not touch any com-
ponents of the high-voltage on-board
electrical system.
#
Aer an accident, have the vehicle trans-
ported away.
#
Have the components of the high-voltage
on-board electrical system checked at a
qualied specialist workshop and
replaced if necessary.
The components of the high-voltage on-board
electrical system are marked with yellow warning
stickers. The cables of the high-voltage on-board
electrical system are orange.
Example
High-voltage components which can become very
hot are marked with a separate warning sticker:
vehicles with hybrid systems generate signicantly
less noise than vehicles with combustion engines.
When driving in electric mode, the vehicle may
not be heard by other road users due to the signif-
icantly reduced noise generated.
It is for this reason that the vehicle is equipped
with a sound generator, which serves as an acous-
tic vehicle alerting system (AVAS). This protective
device is prescribed by law.
The exterior noise of the sound generator (AVAS)
is perceptible at low speeds in the vehicle interior
and is not a malfunction.
Vehicles with a 48 V on-board electrical system
&
DANGER Risk of fatal injury by touching
damaged high-voltage components
Vehicles with a 48 V on-board electrical sys-
tem contain individual high-voltage compo-
nents. These high-voltage components are
under high voltage.
If you modify component parts of these high-
voltage components or touch damaged com-
ponent parts, you may be electrocuted.
80
General notes
F247 0074 02

Related Topics

Popular Owner Manuals