2020-2026 Mercedes GLE SUV MBUX multimedia system -> AMG TRACK PACE User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

MBUX multimedia system -> AMG TRACK PACE for Your Mercedes GLE SUV Fourth Generation (2020-2026)

possible and notify a qualied specialist work-
shop. (/ page 892)
Further information about soware updates can
be found at
Failure of the media display:
If the media display fails or the display message
shown above is shown continuously, several sys-
tems such as the reversing camera, Parking Assist
PARKTRONIC or climate control are no longer
available. Drive on carefully and consult a special-
ist workshop as soon as possible.
Resetting the multimedia system (reset function)
&
WARNING Risk of accident due to failure
of central display functions
While the multimedia system is reset, its func-
tions, such as the reversing camera, are not
available.
#
Only reset the multimedia system when
the vehicle is stationary.
Requirements:
R
The vehicle is switched on.
R
The vehicle is stationary.
Multimedia system:
4
©
5
Settings
5
System
5
Reset
When resetting the system, personal data and set-
tings are deleted, for example:
R
Connected devices
R
Individual user proles
R
Biometric data
%
The data used and saved in the multimedia
system by the driver assistance systems is
deleted.
#
Select Reset.
A query appears asking if the system should
really be reset.
#
Select Yes.
The multimedia system is reset to the factory
settings. The multimedia system is restarted
aer the system reset.
%
Due to data protection, as well as the function
of individual driving systems and driving safety
systems, it is a requirement to carry out a
complete system reset before selling the vehi-
cle or transferring it to a third party, or aer
use as a hire car.
AMG TRACK PACE
Function of AMG TRACK PACE
%
This function is an on-demand feature
(/ page 91).
With AMG TRACK PACE, the driving characteris-
tics on race tracks can be analysed and opti-
mised. You can drive previously saved race tracks
(e.g. Hockenheimring), or record and save new
tracks. The driven lap times are stored for every
track. These can be analysed and compared to
other lap times to achieve the best possible race
results. Additionally, acceleration and braking pro-
cedures can be measured and stored.
Note: Use AMG TRACK PACE only on closed-o
routes outside the public trac area. Adapt your
driving style to your personal performance and
516
MBUX multimedia system
F167 0057 02
environmental conditions. As the driver, you are
solely responsible for driving your vehicle. Park
your vehicle safely before operating the applica-
tion.
Setting Track Race
Multimedia system:
4
TRACK PACE
5
Track Race
Recording a new track
#
Select Ü New track .
#
At the desired starting point, select Ì
Start recording.
The track recording starts at this point.
During track recording, sectors can be set to sub-
divide the track.
#
Select ö Set sector.
#
To nish track recording, select É Stop
recording
or cross the starting line again.
#
Conrm the prompt with Yes.
#
Select the weather.
%
The temperature is determined automatically.
#
Enter a name.
#
Press a to conrm.
The track is saved under the name you
entered.
Searching by track name
#
Select ª Search .
#
Enter the track name.
Tracks with the searched name are displayed.
Measuring the time on the saved track
#
Select ß All tracks.
#
Select the desired track.
#
Select u.
#
If you are already at the starting line, select
Start timing.
or
#
Select Navigate to to be navigated to the
starting line.
Timekeeping begins automatically when the start-
ing line has been crossed.
%
Selecting ¨ enables you to switch to the
AR view of the track. Selecting ò also
allows you to switch to the telemetrics dis-
play.
#
To end the timekeeping, select ð End
timekeeping
.
#
Conrm the prompt with OK.
#
Select the weather.
#
Select Yes to save the times recorded for this
track.
Fade in displays during Track Race
The following displays can be superimposed:
R
Tyre temperature
R
Miniature map
R
Sector overview
R
Engine data
R
G-force display
R
Lap overview
#
Select ï Start timing .
#
Select à.
MBUX multimedia system
517
F167 0057 02
#
Pull the desired display from the grid on the
le or right edge of the media display.
The displays are shown during Track Race.
Selecting ¨ on the active display deactivates
it.
Displaying the analysis
#
Select ß All tracks.
An overview of all the driven tracks appears.
#
Select a track.
#
Select a session.
The following data is displayed:
R
lap and sector times
R
average and maximum permissible speed
R
driver
R
vehicle
R
date
R
weather
#
Select Add recording to use a dierent ses-
sion as a reference value.
#
Select % in order to return to the overview.
#
Select Diagram.
#
Set the desired parameters.
The analysis is displayed.
1
Lap overview
2
Parameter overview
3
Editing parameters
4
Adding a new parameter
5
Deleting parameters
%
The following values can be set for parame-
ters, for example:
R
speed
R
longitudinal/lateral acceleration
R
steering angle
R
engine speed
R
engine oil/tyre temperature
Based on the analysis, you can check and opti-
mise driving characteristics for any position on
the track.
Exporting tracks (USB)
#
Select ß Tracks .
An overview of all saved tracks appears.
#
Select the desired track.
#
Select options u of the desired track.
#
Select Export track to….
The selected track can be exported to a USB
storage device connected to the vehicle.
Editing tracks and recordings
#
Select ß Tracks .
#
Select the desired track.
#
Select options u of the desired track.
#
Select Rename or Delete.
or
518
MBUX multimedia system
F167 0057 02
#
Select a track.
#
Highlight the desired recording.
#
Select u options.
#
Select Exporting to… or Delete.
Setting Drag Race
Multimedia system:
4
TRACK PACE
5
Drag Race
Measuring acceleration
#
Select Z Drag race options.
#
Select Acceleration.
#
Set a starting speed or select Automatic.
Measurement begins as soon as the specied
starting speed has been reached.
#
Set a target speed.
Measurement stops as soon as the specied
target speed has been reached.
#
Start o and begin the measurement.
Measurement begins when the vehicle accel-
erates.
Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Quarter mile race
#
Select Z Drag race options.
#
Select Quarter-mile.
#
Set a target distance.
Measurement stops as soon as the specied
target distance has been reached.
#
Start o and begin the measurement.
Measurement begins when the vehicle accel-
erates. Timing runs until the target distance or
a maximum of one mile has been travelled.
Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Measuring braking
#
Z Drag Race options
#
Select Braking.
#
Set a starting speed or select Automatic.
#
Start o and begin the measurement.
#
Brake to a stop.
Measurement is incremental, in steps of
10 km/h to a stop. If the braking procedure is
started e.g. at a speed of 157 km/h, meas-
urement starts as soon as 150 km/h has
been reached
Storing and calling up measured values
If measurement is completed or cancelled, a
prompt appears asking whether the measurement
should be saved.
#
Conrm the prompt with OK to save.
Calling up saved measurements
#
± Select History.
#
Select Acceleration, Quarter-mile or Braking.
#
Select a measurement.
The desired measurement is displayed in
detail.
or
#
Delete a measurement.
MBUX multimedia system
519
F167 0057 02
Calling up the telemetry display
Multimedia system:
4
TRACK PACE
5
Telemetry
The telemetry display shows current vehicle data
as a digital value and as a diagram. Up to four
parameters can be selected that are to be shown
in the display.
For example:
R
engine speed
R
wheel angle
R
speed
R
steering angle
#
Set the desired parameters.
#
Set the time.
The set parameters are evaluated in the dia-
gram for the time set.
Conguring AMG TRACK PACE
Requirements
To connect a mobile device to the TRACK PACE
app:
R
the TRACK PACE app is installed on the mobile
device.
R
The mobile device is connected to the multi-
media system via Wi-Fi (/ page 510).
Multimedia system:
4
TRACK PACE
5
Z
Connecting a mobile device via the TRACK PACE
app
The TRACK PACE app makes it possible to record
videos and to synchronise them with stored
tracks.
#
Select TRACK PACE App.
#
Select Authorise new device.
#
Start the TRACK PACE app on the device to be
connected.
#
Select Continue and conrm the authorisation
prompt.
A four-digit code is shown on the media dis-
play.
#
Enter the code in the smartphone.
The device is authorised.
De-authorising the mobile device
#
Select TRACK PACE App.
#
Select a device.
#
Conrm the prompt with Yes.
The device is de-authorised.
Setting the TRACK PACE display in the head-up
display and driver display
#
Select IC and HUD contents.
#
Activate or deactivate the desired contents.
The content in the head-up display and driver
display is adjusted.
%
For further information on the Head-up Dis-
play (/ page 468).
%
Further information about the driver display
(/ page 457).
Setting acoustic feedback
#
Select Acoustic feedback.
A scale with values from 0 to 10 is shown.
#
Select a setting.
520
MBUX multimedia system
F167 0057 02
Show statistics
#
Select TRACK PACE statistics.
Statistics on the current user prole are dis-
played.
The following data is displayed:
R
driving time
R
track driven
R
tracks recorded
R
track races recorded
R
laps recorded
R
drag races recorded
R
top speed
Activating the ambient light
If this function is active, the vehicle interior is lit in
red or green depending on delta time.
#
Select Ambient light.
#
Activate or deactivate the function.
Setting a dashcam
If the vehicle is equipped with a dashcam, it can
be used in AMG TRACK PACE.
#
Select Dashcam.
#
Select Track Race or Drag Race and activate
Activate recording.
#
You can set which overlay is to be used in the
recorded video under Video overlay contents.
Plug-in hybrid settings
Congures the charging settings
Multimedia system:
4
©
5
Hybrid
5
Charging
Setting the charging program
#
Select Home, Work or Standard.
%
The standard charging program is automati-
cally activated when the vehicle is switched
on or o.
Unlocking the charging cable (mode 3 or 4)
When the function is active, the charging cable is
unlocked when the maximum charge level is
reached.
#
Select Home or Work.
#
Activate or deactivate Unlock charging cable.
Activating or deactivating location-based charging
#
Select Charging program, home or Charging
program, work
.
#
Activate or deactivate Select based on loca-
tion
.
When the function is activated, the vehicle's cur-
rent position is saved as one of the selected
options. When the address is reached again, a
brief query appears as to whether the respective
charging program should be selected.
Activating or deactivating rapid charging
#
Activate or deactivate the Quick charge func-
tion.
The
Quick charge function increases the maxi-
mum possible charging capacity at charging sta-
tions up to 60 kW in order to charge the vehicle's
high-voltage battery faster. Aer the charging
process is complete, the charging capacity in the
"Standard" charging program is again limited to
20 kW in order to protect the high-voltage battery.
MBUX multimedia system
521
F167 0057 02

Related Topics

Popular Owner Manuals