2023-2026 Mini Countryman SUV CONTROLS -> Displays User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

CONTROLS -> Displays for Your Mini Countryman SUV Third Generation (2023-2026)

CONTROLS  
Displays  
Displays  
–
–
–
–
–
Configured interval for displaying trip  
data.  
Vehicle features and options  
Average fuel consumption depending  
on the configured interval.  
This chapter describes model-specific  
equipment, systems, and functions that are  
currently available, or may become available  
in the future, even if they are not present in  
the vehicle.  
Travel time depending on the config-  
ured interval.  
Distance traveled depending on the  
configured interval.  
Additional information:  
Distance traveled in Coasting mode.  
Vehicle equipment, refer to page 8.  
Current consumption  
Trip data  
The current fuel consumption display al-  
lows you to check the current fuel consump-  
tion, e.g., to drive economically and in an  
environmentally-friendly manner.  
Principle  
The trip data display provides various in-  
formation about the trip, e.g., average con-  
sumption or trip distance.  
Average consumption  
The average fuel consumption is displayed  
depending on how the interval for display-  
ing trip data is configured.  
The values can be displayed and reset de-  
pending on different intervals.  
Viewing trip data  
The Interaction Unit can be used to view  
the trip data. There are several ways to view  
trip data:  
Adjusting the display of the trip  
data  
The intervals for displaying trip data can be  
configured.  
–
–
–
Go through the menu as follows: Apps  
menu / "Vehicle" / "Trip data".  
1. To go to the Trip Data menu: Apps  
menu / "Vehicle" / "Trip data".  
Tap the range value on the Interaction  
Unit.  
2. Tap the interval button.  
3. Select the desired setting:  
On the Interaction Unit, tap the odome-  
ter reading in the speedometer.  
–
"for this trip": the values are auto-  
matically reset approx. four hours af-  
ter the vehicle has come to a stand-  
still.  
Additional information:  
Speedometer, refer to page 145.  
Display  
The following trip data is displayed:  
–
"since last refuel": the values are au-  
tomatically reset after refueling with  
a larger quantity of fuel.  
136  
Online Edition for Part no. 01405B39505 - II/24  
Displays  
CONTROLS  
–
–
"since factory": the values since the  
time of the factory delivery are dis-  
played.  
Safety information  
Warning  
"since Individual": the values since  
the last manual reset are displayed.  
The values can be reset at any time.  
When extending and retracting the projec-  
tion screen of the Head-up display, body  
parts can be jammed. There is a risk of in-  
jury. Make sure that the area of movement  
of the projection screen is clear when ex-  
tending and retracting.  
Resetting average values manually  
The average trip data values can be reset  
manually. The following interval is activated  
and the average values are reset: "since  
Individual".  
NOTICE  
Via the Interaction Unit:  
The Head-up display consists of sensitive  
components that can easily be scraped or  
damaged. There is a risk of damage to  
property. Do not place any objects on the  
Head-up display, attach to system compo-  
nents or plug into the system. Do not move  
the moving parts manually.  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Trip data".  
2.  
Tap the button for resetting trip  
data.  
MINI Head-up display  
Overview  
Principle  
The Head-up display projects important in-  
formation in the driver's field of view, for  
instance the speed. Information can be re-  
corded without you having to look away  
from the road.  
The Head-up display can be configured as  
necessary, e.g., adjust the brightness.  
The Head-up display is switched on.  
General information  
Follow instructions for cleaning the Head-  
up display in the Vehicle Care chapter.  
Displayable information  
The following information is displayed on  
the Head-up display:  
Additional information:  
Caring for special components, refer to  
page 389.  
–
–
–
–
Speed.  
Navigation instructions.  
Check Control messages.  
Shift lights.  
137  
Online Edition for Part no. 01405B39505 - II/24  
CONTROLS  
Displays  
–
Depending on vehicle equipment: Sport  
Boost function.  
–
–
Wet road.  
Unfavorable light conditions.  
–
–
Lists and messages.  
The driver assistance systems.  
Check Control  
Some of this information is only displayed  
briefly as needed.  
Principle  
The Check Control system monitors func-  
tions in the vehicle and notifies you of  
faults in the monitored systems.  
Turning the Head-up display on/off  
When switching on, the projection screen  
of the Head-up display is extended. When  
switching off, the projection screen of the  
Head-up display is retracted again.  
A Check Control message, combining indi-  
cator lights or warning lights and text, ap-  
pears on the Interaction Unit and Head-up  
display, where applicable. In addition, an  
acoustic signal may sound.  
To turn the Head-up display on/off, go  
through the menu as follows: Apps menu /  
"Vehicle" / "Displays" / "Head-up display" /  
"Head-up display".  
Some Check Control messages are hidden  
automatically after approx. 20 seconds, but  
they will be stored. Stored Check Control  
messages can be displayed on the Interac-  
tion Unit. Urgent Check Control messages  
are permanently displayed but may be hid-  
den temporarily.  
Settings  
Individual settings can be entered for the  
Head-up display such as for the height,  
brightness or illustration. You can also set  
up specific views on the Head-up display  
separately, e.g., for Driver Assistance infor-  
mation.  
Hiding Check Control messages  
Permanently displayed Check Control mes-  
sages can be hidden temporarily. These  
messages are automatically displayed again  
after approx. 8 seconds.  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Displays" / "Head-up  
display".  
2. Select the desired setting.  
The close icon next to the Check Control  
message indicates whether the Check Con-  
trol message can be hidden.  
Depending on vehicle equipment, the height  
of the Head-up display can be stored using  
the memory function.  
Displaying stored Check Control  
messages  
Saved Check Control messages and addi-  
tional information such as the cause of a  
fault or the required action can be called up  
via Check Control.  
Visibility of the display  
The visibility of the displays in the Head-up  
display is influenced by the following fac-  
tors:  
–
–
Seat position.  
Dust or dirt on the projection screen of  
the Head-up display.  
–
Sunglasses with certain polarization fil-  
ters.  
138  
Online Edition for Part no. 01405B39505 - II/24  
Displays  
CONTROLS  
Depending on the Check Control message,  
further help can be selected.  
Red lights  
Seat belt reminder  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Vehicle status" /  
"Check Control".  
The seat belt on the driver's seat is  
not engaged.  
Additional information:  
2. Select the desired text message.  
Seat belt reminder, refer to page 104.  
Display  
A Check Control message, consisting of text  
and an icon, is displayed. Additional instruc-  
tions can be viewed by tapping on the text.  
Airbag system  
Warning light illuminates briefly: In-  
dicates that the entire airbag system  
and seat belt tensioners are opera-  
tional when drive-ready state is switched  
on.  
If several faults occur at once, the messages  
are displayed consecutively.  
Certain messages displayed while driving  
are displayed again after drive-ready state is  
switched off.  
Warning light does not illuminate or illumi-  
nates continuously: The airbag system or  
seat belt tensioners may not be operational.  
Have the vehicle checked immediately by  
an authorized service center or another  
qualified service center or repair shop.  
Icons next to the menu bar indicate  
whether a Check Control message is  
active or saved.  
Additional information:  
Airbags, refer to page 167.  
Parking brake  
The parking brake is set.  
Additional information:  
Parking brake, refer to page 131.  
Indicator lights and warning lights  
Principle  
Brake system  
The indicator lights and warning lights  
show the status of some vehicle functions  
or indicate when there is a fault in moni-  
tored systems.  
The brake pads are worn or there is  
another issue with the brake system.  
The braking assistance may not be  
operational. A higher pedal force  
may be required for the braking  
process.  
Indicator lights and warning lights can illu-  
minate in a variety of combinations and col-  
ors.  
Have the vehicle checked immediately by  
an authorized service center or another  
qualified service center or repair shop.  
Some indicator lights are checked for  
proper functioning and illuminate tempora-  
rily when drive-ready state is turned on.  
139  
Online Edition for Part no. 01405B39505 - II/24  
CONTROLS  
Displays  
Emergency Stop Assistant  
Warning function in rear-end collision sit-  
uations, refer to page 176.  
The Emergency Stop Assistant is  
triggered.  
Intersection Collision Warning: vehicle  
detected from the right  
Additional information:  
Emergency Stop Assistant, refer to  
page 198.  
The warning light illuminates: risk  
of collision with a vehicle crossing  
from the right detected. Increased  
awareness is required.  
Risk of collision  
The warning light illuminates or  
flashes in conjunction with an acous-  
tic signal if there is a risk of immi-  
nent collision.  
The warning light flashes and a signal  
sounds: risk of imminent collision with a  
crossing vehicle detected. Immediately ini-  
tiate braking or an evasive maneuver.  
Additional information:  
Additional information:  
Forward Collision Mitigation, refer to  
page 173.  
Warning function at intersections, refer to  
page 180.  
Pedestrian Warning  
Intersection Collision Warning: vehicle  
detected from the left  
The warning light illuminates: risk of  
collision with a person, e.g., a pedes-  
trian or a cyclist detected. Increased  
awareness is required.  
The warning light illuminates: risk  
of collision with a vehicle crossing  
from the left detected. Increased  
awareness is required.  
The warning light flashes and a signal  
sounds: risk of imminent collision with a  
person, e.g., a pedestrian or a cyclist de-  
tected. Immediately initiate braking or an  
evasive maneuver.  
The warning light flashes and a signal  
sounds: risk of imminent collision with a  
crossing vehicle detected. Immediately ini-  
tiate braking or an evasive maneuver.  
Additional information:  
Additional information:  
Warning function for pedestrians, refer to  
page 179.  
Warning function at intersections, refer to  
page 180.  
Forward Collision Warning  
Distance control  
The warning light illuminates: risk  
of collision, e.g., with a vehicle de-  
tected. Increased awareness is re-  
quired.  
Warning light flashes and acoustic  
signal sounds: Brake and evade as  
necessary.  
Additional information:  
The warning light flashes and a signal  
sounds: risk of imminent collision with a ve-  
hicle detected. Immediately initiate braking  
or an evasive maneuver.  
Distance Control, refer to page 221.  
Additional information:  
140  
Online Edition for Part no. 01405B39505 - II/24  
Displays  
CONTROLS  
Assisted Driving Mode  
Warning light flashes and signal  
The system may not be operational.  
The Antilock Braking System is not  
available.  
sounds: The system is switched off  
or will be interrupted very soon.  
The ability to steer may be restricted during  
full braking.  
Warning light illuminates and signal  
sounds: The driver is not looking at the  
surrounding traffic. System interruption is  
imminent. The system reduces the speed to  
a standstill if applicable. It is possible that  
the system will not execute any supporting  
steering movements.  
Have the vehicle checked immediately by  
an authorized service center or another  
qualified service center or repair shop.  
Additional information:  
Antilock Braking System, refer to page 209.  
Additional information:  
Assisted Driving Mode  
Assisted Driving Mode, refer to page 227.  
Warning light illuminates and acous-  
tic signal sounds: A system interrup-  
tion is imminent.  
Assisted Driving Mode: Hands are not on  
steering wheel  
Warning light flashes: A lane boundary has  
been crossed.  
Warning light illuminates and acous-  
tic signal sounds:  
Additional information:  
The hands are not on the steering  
wheel or, depending on the vehicle equip-  
ment and national-market version, the driv-  
er's line of sight is not directed at the  
surrounding traffic. System interruption is  
imminent.  
Assisted Driving Mode, refer to page 227.  
Assisted Driving Mode: Hands are not on  
steering wheel  
Steering wheel icon illuminates yel-  
low: Do not grip the steering wheel  
with your hands. The system is still  
active.  
The system reduces the speed to a standstill  
if applicable.  
It is possible that the system will not exe-  
cute any supporting steering movements.  
Grab the steering wheel with your hands.  
Additional information:  
Immediately grasp the steering wheel with  
your hands and pay attention to the sur-  
rounding traffic.  
Assisted Driving Mode, refer to page 227.  
Additional information:  
Dynamic Stability Control  
Assisted Driving Mode, refer to page 227.  
Warning light flashes: Dynamic Sta-  
bility Control is regulating the driv-  
ing and brake power. The vehicle is  
stabilized. Reduce the vehicle speed and  
adjust your driving style to the road condi-  
tions.  
Yellow lights  
Antilock Braking System  
Warning light illuminates: Dynamic Stabil-  
ity Control has malfunctioned or is initializ-  
141  
Online Edition for Part no. 01405B39505 - II/24  
CONTROLS  
Displays  
ing. Driving stabilization is restricted or has Tire pressure monitor  
failed.  
Warning light illuminates: Tire Pres-  
If the warning light illuminates continu-  
ously, have the vehicle checked immedi-  
ately by an authorized service center or  
another qualified service center or repair  
shop.  
sure Monitor is indicating a flat tire  
or tire pressure loss. Follow the in-  
formation in the Check Control message.  
Warning light flashes then illuminates con-  
tinuously: Flat tires or tire pressure losses  
cannot be detected.  
Additional information:  
Dynamic Stability Control, refer to  
page 209.  
–
–
–
–
Fault caused by systems or devices with  
the same radio frequency: after leaving  
the area of the interference, the system  
automatically becomes active again.  
Dynamic Stability Control deactivated, or  
increased driving dynamics activated  
In the case of tires with special appro-  
val: the tire pressure monitor was un-  
able to complete the reset. Reset the  
system again.  
Dynamic Stability Control is deacti-  
vated or enhanced driving dynamics  
is activated.  
Wheel without wheel electronics instal-  
led: Have it checked by an authorized  
service center or another qualified serv-  
ice center or repair shop as needed.  
Additional information:  
–
Dynamic Stability Control, refer to  
page 209.  
–
Setting for increased driving dynamics,  
refer to page 211.  
Malfunction: have the vehicle checked  
by an authorized service center or an-  
other qualified service center or repair  
shop.  
Drive-off support  
Drive-off support is activated.  
Additional information:  
Tire pressure monitor, refer to page 345.  
Additional information:  
Drive-off support, refer to page 212.  
Steering system  
The steering system may not be op-  
erational.  
Flat tire monitor  
Warning light illuminates: Flat Tire  
Monitor is indicating a flat tire or  
tire pressure loss.  
Have the vehicle checked by an au-  
thorized service center or another qualified  
service center or repair shop.  
Reduce your speed and stop cautiously.  
Avoid sudden braking and steering maneu-  
vers.  
Exhaust emissions  
Additional information:  
–
The warning light illuminates:  
Flat tire monitor, refer to page 352.  
The exhaust gas quality is declin-  
ing, e.g., because the fuel filler  
cap is fitted incorrectly. Have the  
142  
Online Edition for Part no. 01405B39505 - II/24  
Displays  
CONTROLS  
vehicle checked as soon as possi-  
ble.  
Automatic High Beam Assistant  
Low-beam headlights are on and Au-  
tomatic High Beam Assistant is ena-  
bled.  
–
The warning light flashes under certain  
circumstances:  
This indicates that there is excessive  
misfiring in the engine.  
The high-beam headlights are turned on and  
off automatically depending on the traffic.  
Reduce the vehicle speed and have the  
vehicle checked immediately; otherwise,  
serious engine misfiring within a brief  
period can seriously damage emission  
control components, in particular the  
catalytic converter.  
Additional information:  
Automatic High Beam Assistant, refer to  
page 154.  
Lane departure warning  
Additional information:  
Depending on vehicle equipment and  
national-market version:  
Socket for OBD on-board diagnostics, refer  
to page 371.  
Indicator light flashes: System is per-  
forming a steering intervention.  
Additional information:  
Green lights  
Lane departure warning, refer to page 184.  
Turn signal  
The turn signal is turned on.  
Automatic Hold holding the vehicle  
If the indicator light is flashing un-  
usually fast, this indicates that a turn  
signal bulb has failed.  
After stopping, the vehicle is au-  
tomatically secured against rolling  
away as soon as the indicator light  
illuminates green.  
Additional information:  
Turn signal, refer to page 153.  
Additional information:  
Automatic Hold, refer to page 133.  
Parking lights  
Cruise Control  
The parking lights are turned on.  
Additional information:  
The system is active.  
Parking lights, low-beam headlights,  
refer to page 157.  
Additional information:  
Cruise control, refer to page 218.  
Low-beam headlights  
Distance control  
The low-beam headlights are turned  
on.  
Indicator light illuminates: Vehicle  
has been detected ahead of you. The  
vehicle icon goes out if no vehicle  
has been detected ahead of you.  
Additional information:  
Parking lights, low-beam headlights, refer to  
page 157.  
Indicator light flashes: Preceding vehicle  
has driven off.  
Additional information:  
143  
Online Edition for Part no. 01405B39505 - II/24  
CONTROLS  
Displays  
Distance Control, refer to page 221.  
Blue lights  
High-beam headlights  
Speed Limit Assistant  
High-beam headlights have been  
turned on.  
The detected speed limit can be ap-  
plied with the SET button. As soon  
as the speed limit has been applied, a  
green checkmark is displayed.  
Additional information:  
High-beam headlights, refer to page 153.  
Additional information:  
Speed Limit Assistant, refer to page 236.  
Automatic High Beam Assistant  
High-beam headlights have been  
turned on by the Automatic High  
Beam Assistant.  
Assisted Driving Mode  
The system supports the driver in  
keeping the vehicle within the lane.  
Additional information:  
Automatic High Beam Assistant, refer to  
page 154.  
Additional information:  
Assisted Driving Mode, refer to page 227.  
Gray lights  
Lane Change Assistant: lane change in  
progress  
Seat belt reminder  
Arrow icon for lane change green:  
the system carries out a lane change.  
Seat belt on the passenger seat or  
another seat in the vehicle is not  
buckled.  
Additional information:  
Lane Change Assistant, refer to page 232.  
Additional information:  
Seat belts, refer to page 102.  
Lane Change Assistant: lane change not  
possible  
Distance control  
Gray line for lane boundary on corre-  
sponding side: System has detected  
a lane change request. Lane change  
not currently possible.  
Indicator light flashes: The require-  
ments to operate the system have  
not been met. The system was de-  
activated but applies the brakes until you  
actively resume control by pressing on the  
brake pedal or accelerator pedal.  
Additional information:  
Lane Change Assistant, refer to page 232.  
Additional information:  
Assisted Driving Mode Plus  
Distance Control, refer to page 221.  
The system is active.  
Additional information:  
Automatic Hold on standby  
Assisted Driving Mode Plus, refer to  
page 233.  
When driving, the indicator light  
shows that Automatic Hold is ready.  
Additional information:  
144  
Online Edition for Part no. 01405B39505 - II/24  
Displays  
CONTROLS  
Automatic Hold, refer to page 133.  
Overview  
Assisted Driving Mode  
The system is on standby and does  
not manipulate steering movements.  
System activates automatically as  
soon as all function conditions are fulfilled.  
Additional information:  
Assisted Driving Mode, refer to page 227.  
1
Tachometerꢀꢁ146  
Assisted Driving Mode Plus  
Power gaugeꢀꢁ145  
Vehicle speed  
The system is interrupted and will  
activate automatically as soon as all  
functional requirements are met.  
2
3
4
5
Odometer readingꢀꢁ136  
Engine temperatureꢀꢁ147  
Fuel gaugeꢀꢁ149  
Additional information:  
Assisted Driving Mode Plus, refer to  
page 233.  
Displaying the speedometer  
To display the speedometer, tap the speed  
value at the top of the Interaction Unit.  
White lights  
Cruise Control with Distance Control  
No Distance Control because acceler-  
ator pedal is being pressed.  
Power gauge  
Additional information:  
Principle  
Distance Control, refer to page 221.  
The power gauge indicates the currently  
drawn drive power as a percentage.  
Assisted Driving Mode Plus  
Enabling/disabling the power  
gauge  
The system can be activated.  
Additional information:  
The power gauge or tachometer is dis-  
played, depending on the drive mode se-  
lected.  
Assisted Driving Mode Plus, refer to  
page 233.  
Speedometer  
Principle  
The speedometer provides detailed driving  
information next to the speed, e.g., mileage.  
145  
Online Edition for Part no. 01405B39505 - II/24  
CONTROLS  
Displays  
Display  
Tachometer  
General information  
Always avoid RPM in the red warning field.  
In this range, the fuel supply is reduced to  
protect the engine.  
Activating/deactivating the  
tachometer  
The tachometer or power gauge is displayed  
depending on the drive mode selected.  
Needle near arrow 1: indicator for energy  
recovery, e.g., while decelerating.  
Needle near arrow 2: Drive power in per-  
cent.  
Reduced rotational speed range  
The available rotational speed range may  
be reduced due certain factors such as a  
cold drive system. The tachometer display  
is automatically adjusted depending on the  
available rotational speed range.  
Reduced drive power  
The available drive power may be reduced  
due to certain factors. The power gauge is  
automatically adjusted accordingly.  
In addition, the icons on the power gauge  
and tachometer indicate reduced drive  
power.  
Standby state and drive-ready  
state  
Icon  
Description  
If OFF appears on the Interac-  
tion Unit, drive-ready state is  
turned off and standby state is  
turned on.  
Blue icon: cold drivetrain.  
White icon: increased drive  
system temperature, for in-  
stance due to sustained or  
high power demand when  
driving on mountain roads.  
If READY appears on the In-  
teraction Unit, the Auto Start/  
Stop function is ready to start  
the engine automatically.  
Depending on vehicle  
equipment and national-  
market version:  
Drive power restriction de-  
termined by MINI Digital  
Key.  
Additional information:  
–
Operating state of the vehicle, refer to  
page 39.  
System-related functional  
limitation.  
–
Auto Start/Stop function, refer to  
page 120.  
A Check Control message is  
displayed in addition where  
applicable.  
146  
Online Edition for Part no. 01405B39505 - II/24  
Displays  
CONTROLS  
Engine temperature  
Selection lists  
Principle  
Principle  
The engine temperature is displayed on the  
speedometer.  
The Interaction Unit or Head-up display  
provide lists of certain functions, which can  
be operated as necessary:  
Additional information:  
–
–
–
–
Entertainment source.  
Current audio source.  
List of recent calls.  
Shortcuts list.  
Speedometer, refer to page 145.  
Coolant, refer to page 367.  
Display  
If necessary, the corresponding menu will  
open.  
Displaying and using the list  
The selection lists can be displayed and op-  
erated using the operating elements on the  
steering wheel.  
Operating Function  
elements  
–
If the engine is cold, the needle is in  
the blue temperature range, close to  
the limit position of the temperature dis-  
play.  
Change the entertainment  
source.  
Pressing the button again  
will close the currently dis-  
played list.  
Drive at moderate RPM and vehicle  
speeds.  
–
–
At normal operating temperature, the  
needle is in the middle or in the left half  
of the temperature display.  
Show list of most recent tele-  
phone calls.  
Displaying the list of short-  
cuts.  
If the engine is hot, the needle is in  
the red temperature range. In addition, a  
Check Control message is displayed.  
Turn the knurled wheel: dis-  
play the list for currently se-  
lected entertainment source  
or scroll up or down in the  
list.  
Indicator light  
A red indicator light is displayed.  
Tilt knurled wheel in corre-  
sponding direction: Move se-  
lection to left or right.  
Press knurled wheel: confirm  
selection.  
147  
Online Edition for Part no. 01405B39505 - II/24  
CONTROLS  
Displays  
Additional information:  
3. Turn the knurled wheel to select a radio  
station.  
Shortcuts, refer to page 46.  
4. Press the knurled wheel to confirm the  
selected radio station.  
Display  
Gear shift indicator  
Principle  
The shift point indicator recommends the  
gear that best suits the current driving sit-  
uation. Using the optimal gear supports an  
efficient driving style.  
Selection lists, e.g., entertainment sources,  
are shown on the Head-up display and Inter-  
action Unit.  
General information  
The gear shift indicator is active in manual  
mode M depending on vehicle equipment  
and national-market version.  
Example: changing the entertainment  
source  
Displays  
Information on upshifting/downshifting or  
the engaged gear is displayed on the Inter-  
action Unit.  
1.  
To select an entertainment  
source, press the entertainment source  
button on the right of the steering  
wheel.  
On vehicles without a gear shift indicator,  
the engaged gear is displayed.  
Example Description  
2.  
To select an entertainment  
source, turn the knurled wheel.  
In continuous manual mode M:  
Optimal gear is engaged.  
3. Press the knurled wheel to confirm the  
selected entertainment source.  
With shift paddles: temporary  
manual mode.  
Example: selecting a radio station  
With shift paddles: Sport pro-  
gram.  
1.  
To select a radio station, press  
the entertainment source button on the  
right of the steering wheel.  
Shift information.  
2.  
To switch to the radio stations  
list, tilt the knurled wheel to the right.  
Additional information:  
Shift paddles, refer to page 126.  
148  
Online Edition for Part no. 01405B39505 - II/24  
Displays  
CONTROLS  
With a low remaining range, a Check Con-  
trol message is briefly displayed. A low re-  
maining range means that engine functions  
cannot always be ensured for sporty driv-  
ing, e.g., when cornering at speed.  
Shift lights  
Principle  
Shift lights are temporarily displayed on the  
Head-up display and indicate the correct  
time to upshift in order to achieve rapid  
acceleration.  
The Check Control message appears con-  
tinuously below a range of approx.  
30 miles/50 km.  
Functional requirement  
Manual mode M must be activated for the  
shift lights to appear.  
Safety information  
NOTICE  
With a range below 30 miles/50 km,  
the engine may no longer have sufficient  
fuel. Engine functions are not ensured  
anymore. There is a risk of damage to  
property. Refuel promptly.  
Display  
Display  
The current range is displayed  
as a numerical value next to  
the fuel gauge.  
Successive fields illuminating yellow indi-  
cate an upcoming shift point.  
–
–
Shift before the red lights illuminate.  
When the maximum rotational speed is  
reached, the entire display flashes red  
and the fuel supply is interrupted in or-  
der to protect the engine.  
Fuel gauge  
Principle  
The current fill level of the fuel tank is dis-  
played.  
Range  
General information  
Vehicle inclination may cause the display to  
vary.  
Principle  
The range indicates the distance that can  
still be covered with the current tank of  
fuel.  
Additional information:  
Refueling, refer to page 328.  
General information  
The estimated range with remaining fuel is  
displayed on the Interaction Unit.  
149  
Online Edition for Part no. 01405B39505 - II/24  
CONTROLS  
Displays  
Display  
Overview  
Icon  
Description  
"Flat Tire Monitor": Status  
of the flat tire monitor, refer  
to page 352.  
"Tire Pressure Monitor": sta-  
tus of the Tire Pressure  
Monitor, refer to page 345.  
"Engine oil level": electronic  
oil measurement, refer to  
page 365.  
Under the fuel gauge, an arrow next to the  
fuel pump symbol indicates which side of  
the vehicle the fuel filler flap is on.  
"Check Control": displaying  
stored Check Control mes-  
sages, refer to page 138.  
The current range is displayed as numerical  
value.  
"Service": display of the  
service notifications, refer  
to page 152.  
Indicator light  
The yellow indicator light illumi-  
nates, once the fuel reserve is  
reached.  
Assisted View  
Vehicle status  
Principle  
With Assisted View, information on driver  
assistance systems can be shown with the  
help of a vehicle animation.  
General information  
The status can be displayed and actions  
performed for several systems such as for  
Check Control.  
Safety information  
Displaying vehicle status  
To display the vehicle status, go through the  
menu as follows: Apps menu / "Vehicle" /  
"Vehicle status".  
Warning  
The system cannot serve as a substitute  
for the driver’s personal judgment in as-  
sessing the traffic situation. Based on the  
limits of the system, it cannot independ-  
ently react to all traffic situations. There  
is a risk of accident, injury, or property  
damage. Adjust driving style to traffic con-  
ditions. Watch the surrounding traffic sit-  
uation closely, be ready to take over steer-  
150  
Online Edition for Part no. 01405B39505 - II/24  
Displays  
CONTROLS  
ing and braking at any time, and actively  
intervene where appropriate.  
Safety information  
Warning  
Display  
Even at temperatures above +37 ℉/+3 ℃  
there is a risk of icy roads, for instance  
on bridges or shady sections of the road.  
There is a risk of accident, injury, or prop-  
erty damage. Modify your driving style  
to the weather conditions at low tempera-  
tures.  
Date and time  
An example of active Driver Assistance:  
Indicator lights and warning lights for Dis-  
tance Control and Assisted Driving Mode  
are displayed. At the same time, the Dis-  
tance Control is animated in Assisted View.  
Various settings can be configured for dis-  
playing the date and time.  
Depending on vehicle equipment and na-  
tional-market version, the time zone can  
be set manually or automatically. Automatic  
time zone adjustment automatically updates  
the time, date, and time zone as necessary.  
Assisted View can also be activated  
for the Head-up display via Settings.  
The date is set automatically based on the  
time zone.  
System limits  
The system's detection capability is limited.  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "System settings" /  
"Time".  
Only objects that are detected by the sys-  
tem are taken into account.  
Additional information:  
2. Select the desired settings.  
–
–
Cameras, refer to page 34.  
Radar sensors, refer to page 35.  
Setting the units of measure-  
ment  
Outside temperature  
Depending on the national-market version,  
you can set the units of measurement for  
some values, for instance consumption, dis-  
tances, and temperature.  
General information  
If the indicator drops to +37℉/+3℃ or  
lower, a signal sounds.  
A Check Control message is displayed.  
There is an increased risk of ice on roads.  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "System settings" /  
"Units".  
2. Select the desired setting.  
151  
Online Edition for Part no. 01405B39505 - II/24  
CONTROLS  
Displays  
Service  
Principle  
The service notifications indicate recom-  
mended maintenance work.  
General information  
After switching on the vehicle, the Interac-  
tion Unit briefly shows the next service ap-  
pointment or the distance remaining until  
the next required maintenance.  
A service advisor can read out the mainte-  
nance work from the vehicle key.  
Display  
More detailed information can be displayed.  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Vehicle status" /  
"Service".  
Maintenance measures as well as legally  
mandated inspections are displayed.  
2. Select the desired entry to bring up  
more information.  
Entering appointment dates  
The dates for mandatory vehicle inspections  
can be entered.  
Make sure that the vehicle's date and time  
are set correctly.  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Vehicle status" /  
"Service" / "Vehicle inspection".  
2. Select the desired setting.  
152  
Online Edition for Part no. 01405B39505 - II/24  

Related Topics

CONTROLS
Dashboard Sensors of the vehicle Operating state of the vehicle Display and operating concept MINI Remote Software Upgrade Personal settings Opening and closing Seats, mirrors and steering wheel Transporting children safely Driving Light and view Safety Driving stability control systems Driver assistance systems Parking Driving comfort Climate control Interior equipment Storage compartments Cargo area

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot