2010-2019 Nissan Juke SUV Starting and driving -> Parking User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving -> Parking for Your Nissan Juke SUV First Generation (2010-2019)

PARKING  
Canceling cruising speed  
Use any one of the following methods to cancel the set  
speed.  
WARNING:  
.
.
Do not stop or park the vehicle over  
flammable materials such as dry grass,  
waste paper or rags. They may ignite and  
cause a fire.  
.
.
.
Push the CANCEL switch.  
Tap the foot brake pedal.  
Push the cruise control MAIN switch. The CRUISE  
indicator light turns off.  
Safe parking procedures require that both  
the parking brake be applied and the shift  
lever placed in the P(Park) position  
(Continuously Variable Transmission mod-  
els) or the shift lever placed in an appro-  
priate gear (Manual Transmission models).  
Failure to do so could cause the vehicle to  
move unexpectedly or roll away and result in  
an accident.  
.
When parking the vehicle, make sure the  
shift lever is moved to the P(Park)  
position. The shift lever cannot be moved  
out of the P(Park) position without  
depressing the foot brake pedal (Continu-  
ously Variable Transmission models).  
.
.
Never leave the engine running while the  
vehicle is unattended.  
Never leave children or adults who would  
normally require the support of others alone  
in the vehicle. Pets should not be left alone  
either. They could unknowingly activate  
switches or controls and inadvertently be-  
come involved in a serious accident and  
injure themselves. On hot, sunny days,  
temperatures in  
a
closed vehicle could  
quickly become high enough to cause se-  
vere or possibly fatal illness to people and  
animals.  
Starting and driving 5-21  
4. Models with Intelligent Key system:  
Place the ignition switch in the “OFF” position.  
Models without Intelligent Key system:  
Place the ignition switch in the “LOCK” position  
and remove the key.  
SSD0488  
Left-Hand Drive (LHD) models  
SSD0489  
Right-Hand Drive (RHD) models  
1. Firmly apply the parking brake.  
vehicle forward until the curb side wheel gently  
touches the curb. Then apply the parking brake.  
2. Continuously Variable Transmission (CVT) mod-  
els: Move the shift lever to the “P” (Park) position.  
2
HEADED UPHILL WITH CURB  
*
Turn the wheels away from the curb and allow the  
vehicle to move back until the curb side wheel  
gently touches the curb. Then apply the parking  
brake.  
Manual Transmission (MT) models: Move the shift  
lever to the “R” (Reverse) position. When parking  
on an uphill grade, move the shift lever to the “1”  
(1st) position.  
3. To help prevent the vehicle from moving into traffic  
when parked on an incline, it is a good practice to  
turn the wheels as illustrated.  
HEADED UPHILL OR DOWNHILL, WITHOUT  
3
CURB  
*
Turn the wheels toward the side of the road so the  
vehicle will move away from the center of the road  
if the vehicle moves. Then apply the parking brake.  
1
HEADED DOWNHILL WITH CURB  
*
Turn the wheels towards the curb and move the  
5-22 Starting and driving  

Related Topics

Popular Owner Manuals