2010-2019 Nissan Juke SUV Starting and driving -> Vehicle security User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving -> Vehicle security for Your Nissan Juke SUV First Generation (2010-2019)

VEHICLE SECURITY  
When leaving your vehicle unoccupied:  
Ultimately, the driver is responsible for  
safety.  
Self-test feature  
.
Always take the key with you - even when leaving  
the vehicle in your own garage.  
The ABS includes electronic sensors, electric pumps,  
hydraulic solenoids and a computer. The computer has  
a built-in diagnostic feature that tests the system each  
time you start the engine and move the vehicle at a low  
speed in forward or reverse. When the self-test  
occurs, you may hear a “clunk” noise and/or feel a  
pulsation in the brake pedal. This is normal and does  
not indicate a malfunction. If the computer senses a  
malfunction, it switches the ABS off and illuminates the  
ABS warning light on the instrument panel. The brake  
system then operates normally, but without anti-lock  
assistance.  
.
Tire type and condition may also affect  
braking effectiveness.  
.
.
Close all windows completely and lock all doors.  
Always park your vehicle where it can be seen.  
Park in a well lit area during the night.  
— When replacing tires, install the speci-  
fied size of tires on all four wheels.  
.
.
.
If the security system is equipped, use it - even for  
a short period.  
— When installing a spare tire, make sure  
that it is the proper size and type as  
specified on the tire placard. (See Tire  
placard(P.9-10).)  
Never leave children or pets in the vehicle  
unattended.  
Never leave valuables inside the vehicle. Always  
take valuables with you.  
— For detailed information, see Tires and  
wheels(P.8-26).  
.
.
Never leave the vehicle documents in the vehicle.  
If the ABS warning light illuminates during the self-test  
or while driving, have the vehicle checked by  
NISSAN dealer.  
The Anti-lock Braking System (ABS) controls the  
brakes so the wheels do not lock during hard braking  
or when braking on slippery surfaces. The system  
detects the rotation speed at each wheel and varies  
the brake fluid pressure to prevent each wheel from  
locking and sliding. By preventing each wheel from  
locking, the system helps the driver maintain steering  
control and helps to minimize swerving and spinning  
on slippery surfaces.  
Never leave articles on a roof rack. Remove them  
from the rack and keep and lock them inside the  
vehicle.  
a
Normal operation  
.
Never leave the spare key in the vehicle.  
The ABS operates at speeds above 5 to 10 km/h (3 to  
6 MPH). The speed varies according to road condi-  
tions.  
When the ABS senses that one or more wheels are  
close to locking up, the actuator rapidly applies and  
releases hydraulic pressure. This action is similar to  
pumping the brakes very quickly. You may feel a  
pulsation in the brake pedal and hear a noise from  
under the hood or feel a vibration from the actuator  
when it is operating. This is normal and indicates that  
the ABS is operating properly. However, the pulsation  
may indicate that road conditions are hazardous and  
extra care is required while driving.  
Using system  
Depress the brake pedal and hold it down. Depress  
the brake pedal with firm steady pressure, but do not  
pump the brakes. The ABS will operate to prevent the  
wheels from locking up. Steer the vehicle to avoid  
obstacles.  
WARNING:  
Do not pump the brake pedal. Doing so may  
result in increased stopping distances.  
Starting and driving 5-25  

Related Topics

Popular Owner Manuals