2018-2025 Nissan Leaf 4 Door Instruments and controls -> Windows User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Windows for Your Nissan Leaf 4 Door Second Generation (2018-2025)

WINDOWS  
POWER WINDOWS  
WARNING  
Make sure that all passengers have  
their hands, etc. inside the vehicle  
while it is in motion and before clos-  
ing the windows. Use the window  
lock switch to prevent unexpected  
use of the power windows.  
To help avoid risk of injury or death  
through unintended operation of the  
vehicle or its systems, including en-  
trapment in windows or inadvertent  
door lock activation, do not leave  
children, people who require the as-  
sistance of others, or pets unat-  
tended in your vehicle. Additionally,  
the temperature inside a closed ve-  
hicle on a warm day can quickly be-  
come high enough to cause a signifi-  
cant risk of injury or death to people  
and pets.  
LIC4294  
STOWING GOLF BAGS  
Normally, two standard golf bags can be  
stowed in the cargo area. Insert the top of  
the golf bag into the right side of the cargo  
1
2
area  
then rotate the bag backward  
.
O
O
Insert the top of the second golf bag into  
3
right side of the cargo area  
and stow  
LIC2497  
O
The power windows operate when the  
power switch is in the ACC or ON position,  
or for about 45 seconds after the power  
switch is placed in the OFF position. If the  
driver’s or front passenger’s door is opened  
during this period of about 45 seconds,  
power to the windows is canceled.  
the bottom of golf bag forward all the way  
4
Slide down the tonneau cover along  
the rear seat back.  
4
.
O
In some cases, you may not be able to stow  
two golf bags in your vehicle, depending on  
their sizes or types.  
5
Remove the tonneau cover by pulling  
either the left or right side backward  
away from the pillar.  
2-66 Instruments and controls  
Locking passengers' windows  
C
O
When the lock button  
the driver side window can be opened or  
closed. Push it in again to cancel.  
is pushed in, only  
JVC0051X  
JVC0052X  
Main power window switch  
(driver's side)  
Passenger side power window  
switch  
1. Driver side automatic switch  
2. Front passenger side switch  
3. Rear left passenger side switch  
The passenger's side power window  
switch will open or close only the corre-  
sponding window. To open or close the  
window, push down or pull up the switch  
and hold it.  
4. Rear right passenger side switch  
5. Window lock button  
Rear power window switch  
A
The rear power window switches open or  
close only the corresponding windows. To  
open the window, push the switch and hold  
it down. To close the window, pull the  
switch up.  
To open or close a window, push down  
O
B
or pull up  
the corresponding switch and  
hold it. The main switches, on the driver's  
side, will open or close all the windows.  
O
Instruments and controls 2-67  
Auto-reverse function  
WARNING  
If the windows do not close  
automatically  
If the power window automatic function  
(closing only) does not operate properly,  
perform the following procedure to initial-  
ize the power window system.  
There are some small distances imme-  
diately before the closed position  
which cannot be detected. Make sure  
that all passengers have their hands,  
etc., inside the vehicle before closing  
the window.  
1. Place the power switch in the ON  
position.  
2. Close the door.  
If the control unit detects something  
caught in the window as it is closing, the  
window will be immediately lowered.  
3. Open the window completely by operat-  
ing the power window switch.  
The auto reverse function can be activated  
when the window is closed by automatic  
operation when the power switch is in the  
ON position or for 45 seconds after the  
power switch is placed in the OFF position.  
4. Pull the power window switch and hold  
it to close the window, and then hold the  
switch more than 3 seconds after the  
window is closed completely.  
JVC0053X  
Automatic operation  
The automatic operation is available for  
the switch that has an  
surface.  
mark on its  
5. Release the power window switch. Op-  
erate the window by the automatic  
function to confirm the initialization is  
complete.  
Depending on the environment or driv-  
ing conditions, the auto reverse function  
may be activated if an impact or load  
similar to something being caught in the  
window occurs.  
To fully open or close the window, com-  
pletely push down or pull up the switch and  
release it; the switch need not be held. The  
window will automatically open or close all  
the way. To stop the window, just push or lift  
the switch in the opposite direction.  
If the power window automatic function  
does not operate properly after perform-  
ing the procedure above, have your vehicle  
serviced. It is recommended that you visit a  
NISSAN certified LEAF dealer for this ser-  
vice.  
A light push or pull on the switch will cause  
the window to open or close until the  
switch is released.  
2-68 Instruments and controls  

Related Topics

Popular Owner Manuals