2007-2012 Nissan X Trail SUV Pre-driving checks and adjustments -> Intelligent Key system (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Pre-driving checks and adjustments -> Intelligent Key system (if equipped) for Your Nissan X Trail SUV Second Generation (2007-2012)

(132,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
3-10 Pre-driving checks and adjustments
Hazard indicator and horn mode (except for South Africa and Europe)
GUID-D05F8A1A-366B-4042-BD7A-275884BDEFB6
DOOR LOCK
DOOR UNLOCK
Remote keyless entry system
HAZARD - twice
HORN - once
HAZARD - once
HORN - none
Switching procedure (if equipped)
GUID-9087B197-555A-4F3D-A8D6-E0ACA95CB83B
You can switch the hazard indicator and horn operation
with the following procedures.
Push the “LOCK”
*
2
and “UNLOCK”
*
3
buttons simultaneously for more than 2.5 seconds to
switch the mode from one to the other.
When pushing the buttons to set the hazard indicator
mode, the hazard indicator flashes 3 times.
When pushing the buttons to set the hazard indicator
and horn mode, the hazard indicator flashes once and
the horn chirps once.
JI0469
T32A130827-769E5CB4-B87B-458F-A946-17DD933A7E45
SPA2502
Type A
SPA2543
Type B (example)
INTELLIGENT KEY SYSTEM (if
equipped)
Condition: 'Except for China'/
(133,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
SPA2406
Type C
SPA2431
Type D
SPA2717
Type E
1. Intelligent Key (2)
2. Mechanical key (in the Intelligent Key) (2)
3. Key number plate (1)
WARNING:
. Radio waves could adversely affect electric
medical equipment. Those who use a pace-
maker should contact the electric medical
equipment manufacturer for the possible
influences before use.
. The Intelligent Key transmits radio waves
when the buttons are pushed. The radio
waves may affect aircraft navigation and
communication systems. Do not operate the
Intelligent Key while on an airplane. Make
sure the buttons are not operated uninten-
tionally when the unit is stored during a
flight.
The Intelligent Key system can operate all the door and
the back door using the remote controller function or
pushing the request switch on the vehicle without
taking the key out from a pocket or purse. The
operating environment and/or conditions may affect
the Intelligent Key system operation.
Be sure to read the f ollowing before using the
Intelligent Key system.
CAUTION:
. Be sure to carry the Intelligent Key with you
when operating the vehicle.
. Never leave the Intelligent Key in the vehicle
when you leave the vehicle.
. When the outside temperature is extremely
low, the Intelligent Key system may not
function properly.
The Intelligent Key is always communicating with the
vehicle as it receives radio waves. The Intelligent Key
system transmits weak radio waves. Environmental
conditions may interfere with the operation of the
Intelligent Key system under the following operating
conditions.
. When operating near a location where strong
radio waves are transmitted, such as a TV tower,
power station and broadcasting station.
. When in possession of wireless equipment, such
as a cellular telephone, transceiver, and CB radio.
. When the Intelligent Key is in contact with or
covered by metallic materials.
. When any type of radio wave remote control is
used nearby.
. When the Intelligent Key is placed near an electric
appliance such as a personal computer.
. When the vehicle is parked near a parking meter.
In such cases, correct the operating conditions before
using the Intelligent Key function or use the mechanical
key.
Although the life of the battery varies depending on the
operating conditions, the battery’s life is approximately
2 years. If the battery is discharged, replace it with a
Pre-driving checks and adjustments 3-11
Condition: 'Except for China'/
(134,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
3-12 Pre-driving checks and adjustments
new one.
For information regarding replacement of a battery, see
“Intelligent Key battery” (P.8-22).
Since the Intelligent Key is continuously receiving radio
waves, if the key is left near equipment which transmits
strong radio waves, such as signals from a TV and
personal computer, the battery life may become
shorter.
Because the steering wheel is locked electrically (if
equipped), unlockin g the steering wheel with the
ignition switch in the “LOCK” position is impossible
when the vehicle battery is completely discharged. Pay
special attention that the vehicle b atte ry is not
completely discharged.
As many as 4 Intelligent Keys can be used with one
vehicle. For information about the purchase and use of
additional Intelligent Keys, contact a NISSAN dealer.
CAUTION:
. Do not allow the Intelligent Key, which
contains electrical components, to come
into contact with water or salt water. This
could affect the system function.
. Do not drop the Intelligent Key.
. Do not strike the Intelligent Key sharply
against another object.
. Do not change or modify the Intelligent Key.
. Wetting may damage the Intelligent Key. If
the Intelligent Key gets wet, immediately
wipe until it is completely dry.
. Do not place the Intelligent K ey for an
extended period in an area where tempera-
tures exceed 608C (1408F).
. If the outside temperature is below −108C
(148F), the battery of the Intelligent Key may
not function properly.
. Do not attach the Intelligent Key with a key
holder that contains a magnet.
. Do not place the Intelligent Key near equip-
ment that produces a magnetic field, such as
a TV, audio equipment and personal compu-
ters.
If an Intelligent Key is lost or stolen, NISSAN
recommends erasing the ID code of that Intelligent
Key from the vehicle. This may prevent the unauthor-
ized use of the Intelligent Key to operate the vehicle.
For information regarding the erasing procedure,
contact a NISSAN dealer.
For information regarding replacement of a battery, see
“Battery” (P.8-20).
The Intelligent Key function can be disabled. For
information about disabling the Intelligent Key function,
contact a NISSAN dealer.
Condition: 'Except for China'/
(135,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
OPERATING RANGE
T32A130827-C3D68A42-BF8A-4612-8787-FED6A717AD9B
SPA2074
SPA2408
The Intelligent Key functions can only be used when
the Intelligent Key is within the specified operating
range from the request switch
*
1
.
When the Intelligent Key battery is discharged or
strong radio waves are present near the operating
location, the Intelligent Key system’s operating range
becomes narrower, and the Intelligent Key may not
function properly.
The operating range is within 80 cm (31.50 in) from
each request switch
*
1
.
If the Intelligent Key is too close to the door glass,
handle or rear bumper the request switches may not
function.
When the Intelligent Key is within the operating range,
it is possible for anyone, even someone who does not
carry the Intelligent Key, to push the request switch
and lock/unlock the doors.
USING INTELLIGENT KEY SYSTEM
T32A130827-2AEA7F37-6052-4E2F-8206-CCB813AFFD9E
SPA2408
The request switch will not function under the following
conditions:
. When the Intelligent Key is left inside the vehicle
. When the Intell igent Key is not within the
operational range
. When any door is open or not closed securely
. When the Intelligent Key battery is discharged
. When the ignition switch is in the “ON” position
SPA2407
. Do not push the door handle request switch with
the Intelligent Key held in your hand as illustrated.
The close distance to the door handle will cause
the Intelligent Key s ystem to have difficulty
recognizing that the Intelligent Key is outside the
vehicle.
. After locking the doors using the door handle
request switch, make sure that the doors have
bee n securely locked by operating the door
handles.
. When locking the doors using the door handle
request switch, make sure to have the Intelligent
Key in your possession before operating the door
handle request switch to prevent the Intelligent
Key from being left in the vehicle.
. The door handle request switch is operational only
when the Intelligent Key has been detected by the
Intelligent Key system.
Pre-driving checks and adjustments 3-13
Condition: 'Except for China'/
(136,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
3-14 Pre-driving checks and adjustments
. Do not pull the door handle before pushing the
door handle request switch. The door will be
unlocked but will not open. Release the door
handle once and pull it again to open the door.
SPA2710
SPA2545
When you carry the Intelligent Key with you, you can
lock or unlock all doors by pushing the door handle
request switch (driver’s or front passenger’s)
*
A
or
back door request switch
*
B
within the range of
operation.
When you lock or unlock the doors or open the back
door, the hazard indicator will flash and the outside
chime will sound (if equipped) as a confirmation. For
details, see “Hazard indicator and horn operation”
(P.3-18).
Welcome light and farewell light function (if
equipped)
GUID-641B8C15-6D62-4E79-8CCA-B3D0181F028C
When you lock or unlock the doors including the back
door, the clearance lights, tail lights and the license
plate light will illuminate for a period of time. The
welcome light and farewell light function can be
disabled. For information about disabling the welcome
light and farewell light function, contact a NISSAN
dealer.
Locking doors
T32A130827-785FF396-2160-40C4-993B-FF0C18489C71
1. Place the ignition switch in the “OFF” position.
2. Carry the Intelligent Key with you.
3. Close all doors.
4. Push the door handle request switch
*
A
(driver’s
or front passenger’s) or the back door request
switch
*
B
.
5. All doors and the back door will be locked. The
door lock indicator light
(located on the
instrument panel) will illuminate for 1 minutes (if
equipped).
6. Operate door handles to confirm that the doors
have been securely locked.
Lockout protection (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
To prevent the Intelligent Key from being accidentally
locked in the vehicle, lockout protection is equipped
with the Intelligent Key system.
. When the Intelligent Key is left in the vehicle and
you try to lock the door using the driver’s inside
lock knob after getting out of the vehicle, all the
doors will unlock automatically and a chime will
sound after the door is closed.
. When the Intelligent Key is left in the vehicle while
the driver’s door is opened and you try to lock the
door using the power door lock switch after
getting out of the vehicle, an inside warning chime
will sound after the power door lock switch or the
driver’s inside lock knob is operated.
CAUTION:
The lockout protection may not function under
the following conditions:
. When the Intelligent Key is placed on top of
the instrument panel.
. When the Intelligent Key is placed on the
tonneau cover (if equipped).
. When the Intelligent Key is placed inside of
the glove box.
. When the Intelligent Key is placed inside of
the door pockets.
. When the Intelligent Key is placed on or
under the spare tire area.
. When the Intelligent Key is placed inside or
near metallic materials.
The lockout protection may function when the
Intelligent Key is outside the vehicle but is too
close to the vehicle.
Unlocking doors
T32A130827-9F0ECDCC-98CC-482A-89BC-2574C2B9A065
Switching door unlock mode (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
To switch the door unlock mode from one to another,
see “Using remote keyless entry function” (P.3-17).
Condition: 'Except for China'/
(137,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Selective door unlock mode (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Carry the Intelligent Key with you.
2. Push the door handle request switch
*
A
or the
back door request switch
*
B
.
3. Driver’s door handle or back door request switch:
Only the corresponding door will be unlocked.
Front passenger’s door handle request switch:
All doors (including the back door) will be
unlocked. (Selective door unlock mode is not
available.)
4. Push the door handle request switch again within
1 minute or 5 seconds.
5. All doors will be unlocked.
6. Operate the door handles to open the doors.
All door unlock mode:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Carry the Intelligent Key with you.
2. Push the door handle request switch
*
A
or back
door request switch
*
B
.
3. All doors and the back door will be unlocked.
If a door handle is pulled while unlocking the doors,
that door may not be unlocked. Returning the door
handle to its original position will unlock the door. If the
door does not unlock, after returning the door handle,
push the door handle request switch to unlock the
door.
All doors will be locked automatically unless one of the
following operations is performed within 1 minute or 30
seconds after pushing the request switch while the
doors are locked.
. Opening any doors.
. Pushing the ignition switch.
If during the preset time period the “UNLOCK”
button on the Intelligent Key is pushed, all doors will be
locked automatically after the next preset time.
Opening power back door (if equipped)
GUID-6F6E112C-A657-42AE-A90A-4232E4A066AD
1. Carry the Intelligent Key.
2. Push the power back door opener switch
*
C
.
3. The back door will unlock and automatically open.
The hazard indicator flashes 4 times and the outside
chime sounds.
To close the back door, push the power back door
button on the Intelligent Key, the power back door
switch on the instrument panel or the lower part of the
back door. (See “Back door” (P.3-23).)
WARNING SIGNALS
T32A130827-300A2641-0F13-46BD-B700-FFCF5A9F7997
The Intelligent Key system is equipped with a function
that is designed to minimize improper operations and
to help prevent the vehicle from being stolen. The
warning buzzer sounds and the warning light illumi-
nates or the warning display appears on the vehicle
information display when improper operati ons are
detected.
CAUTION:
When the buzzer sounds and the warning light
illuminates or the warning display appears, be
sure to check both the vehicle and the Intelligent
Key.
Pre-driving checks and adjustments 3-15
Condition: 'Except for China'/
(138,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
3-16 Pre-driving checks and adjustments
TROUBLESHOOTING GUIDE
T32A130827-D271D359-A932-46DB-8333-9B39CD617627
Symptom Possible cause
Action to take
When pushing the ignition switch to stop
the engine
The Shift to Park warning appears on the
vehicle information display and the inside
warning chime sounds continuously or
for a few seconds. (Continuously Variable
Transmission models)
The shift lever is not in the “P” (Park)
position.
Shift the shift lever to the “P” (Park)
position.
When opening the driver’s door to get
out of the vehicle
The inside warning chime sounds con-
tinuously.
The ignition switch is in the “OFF”
position.
Close the door securely.
When closing the door after getting out
of the vehicle
The Key System Fault warning in the
meter blinks in yellow, the outside chime
sounds 3 times and the inside warning
chime sounds for a few seconds.
The ignition switch is in the “ON”
position.
Place the ignition switch in the “OFF”
position.
The Shift to Park warning appears on the
vehicle information display and the out-
side chime sounds continuously. (Con-
tinuously Variable Transmission models)
The ignition switch is in the “OFF”
position and the shift lever is not in the
“P” (Park) position.
Move the shift lever to the “P” (Park)
position and place the ignition switch in
the “OFF” position.
When pushing the request switch or the
“LOCK”
button on the Intelligent
Key to lock the door
The outside chime sounds for a few
seconds and all the doors unlock.
The Intelligent Key is inside the vehicle.
Carry the Intelligent Key with you.
When closing the door with the inside
lock knob turned to “LOCK”
The outside chime sounds for a few
seconds and all the doors unlock.
The Intelligent Key is inside the vehicle or
luggage room.
Carry the Intelligent Key with you.
When pushing the door handle request
switch to lock the door
The outside chime sounds for a few
seconds.
The Intelligent Key is inside the vehicle or
luggage room.
Carry the Intelligent Key with you.
A door is not closed securely.
Close the door securely.
The door handle request switch is
pushed before the door is closed.
Push the door handle request switch after
the door is closed.
When pushing the ignition switch to start
the engine
The Key System Fault warning in the
meter blinks in green.
The battery charge is low.
Replace the battery with a new one. (See
“Battery” (P.8-20).)
The Key System Fault warning in the
meter blinks in yellow and the inside
warning chime sounds for a few seconds.
The Intelligent Key is not in the vehicle.
Carry the Intelligent Key with you.
When pushing the ignition switch
The Key System Fault warning in the
meter illuminates in yellow.
It warns of a malfunction with the
electrical steering lock system or the
Intelligent Key system.
Contact a NISSAN dealer.
Condition: 'Except for China'/
(139,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
USING REMOTE KEYLESS ENTRY FUNC-
TION
GUID-27E5A408-0CF3-4029-BFC2-03A4C5496881
SPA2349
Type A
SPA2546
Type B (example)
SPA1926A
Type C
SPA2561
Type D
SPA2718
Type E
*
A
LOCK button
*
B
UNLOCK button
*
C
Power back door button (if equipped)
*
D
PANIC button (if equipped)
Operating range
GUID-B36C97E8-08E8-47EA-82F0-17A07F11790A
It is possible to lock/unlock all doors including the back
door using the remote keyless entry system. The
operating distance depends upon the conditions
around the vehicle. To securely operate the lock and
unlock buttons, approach the vehicle to about 1 m (3.3
ft) from the door.
The remote keyless entry system will not function under
the following conditions:
. When the Intell igent Key is not within the
operational range.
. When the Intelligent Key battery is discharged.
For information regarding the replacement of a battery,
see “Battery” (P.8-20).
Pre-driving checks and adjustments 3-17
Condition: 'Except for China'/
(140,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
3-18 Pre-driving checks and adjustments
Locking doors
GUID-59C48714-7092-416E-964F-87ABE0DE37CD
1. Place the ignition switch in the “OFF” position and
carry the Intelligent Key.
2. Close all doors (including the back door).
3. Push the “LOCK” button
*
A
on the Intelligent
Key.
4. All doors will be locked. The door lock indicator
light
(located on the instrument panel) will
illuminate for 1 minutes (if equipped).
5. Operate the door handles to confirm that the
doors have been securely locked.
CAUTION:
After locking the doors using the Intelligent Key,
be sure that the doors h ave bee n securely
locked by operating the door handles.
Unlocking doors
GUID-02C4F53F-111C-4240-90DA-B021C8390A59
When you first receive the vehicle, the door unlock
mode is set to unlock all the doors with one push of the
“UNLOCK” button
*
B
. The door unlock mode can be
switch ed to the selective door u nlock mode (if
equipped).
To change the door unlock mode from one to another,
see “Vehicle information display” (P.2-20).
All door unlock mode:
1. Push the “UNLOCK” button
*
B
on the Intelligent
Key.
2. All doors (incl ud in g the back door) will be
unlocked.
Selective door unlock mode (if equipped):
1. Push the “UNLOCK” button
*
B
on the Intelligent
Key.
2. The driver’s door will be unlocked.
3. Push the “UNLOCK” button
*
B
on the Intelligent
Key again.
4. All doors (incl ud in g the back door) will be
unlocked.
Automatic relock:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
All doors will be locked automatically unless one of the
following operations is performed within 30 seconds or
1 minute after pushing the “UNLOCK” button
*
B
on
the Intelligent Key while the doors are locked. If during
this 30 seconds or 1 minute time period, the
“UN LOCK” button
*
B
on the Intelligen t Key is
pushed, all doors will be locked automatically after
another 30 seconds or 1 minute.
. Opening any door or back door.
. Pushing the ignition switch.
Opening or closing back door (if equipped)
GUID-7A97DFB7-E05B-4600-BFF6-A75E59407982
Opening:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Push the power back door button
*
C
for
more than 1 second.
2. The back door will automatically open.
The hazard indicator flashes 4 times and the outside
chime sounds.
Closing:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
1. Push the power back door button
*
C
.
2. The back door will automatically close.
The hazard indicator flashes 4 times and the outside
chime sounds.
If the button
*
C
is pushed while the back door
is being opened or closed, the back door will reverse.
Using panic alarm (if equipped)
GUID-4937A23C-012A-422A-BE61-A0FEA 679E405
If you are near your vehicle and feel threatened, you
may activate the alarm to call attention as follows:
1. P ush the “PANIC”
button
*
D
on the
Intelligent Key for more than 1 second.
2. The theft warning alarm an d headlights (i f
equipped) will stay on for 25 seconds.
3. The panic alarm stops when:
.
It has run for 25 seconds, or
.
Any of the buttons on the Intelligent Key are
pushed. (Note: Panic button should be pushed
for more than 1 second.)
HAZARD INDICATOR AND HORN OPERA-
TION
GUID-D81C103B-F49C-4165-9966-43D3288AC0B0
When you lock or unlock the doors or the back door
with the request switch or the remote keyless entry
function, the hazard indicator will flash and the horn or
the outside chime will sound as a confirmation.
The following d escriptions show how th e hazard
indicator and outside chime will activate when locking
or unlocking the doors or back door.
Condition: 'Except for China'/
(141,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Hazard indicator mode (for South Africa and Europe)
GUID-36282E96-FFD1-4266-BD28-6B6CCCE 40A4B
Operation DOOR LOCK
DOOR UNLOCK
Intelligent Key system (using door
handle or back door request
switch)
HAZARD - once
HAZARD - twice
Remote keyless entry system
(using
or button)
HAZARD - once
HAZARD - twice
Hazard indicator mode (except for South Africa and Europe)
GUID-65718739-3E9A-41CF-BB5C-1F201A5A22CE
Operation DOOR LOCK
DOOR UNLOCK
Intelligent Key system (using door
handle or back door request
switch)
HAZARD - twice
HAZARD - none
Remote keyless entry system
(using
or button)
HAZARD - twice
HAZARD - none
Hazard indicator and horn mode (except for South Africa and Europe)
GUID-EE137A74-2D68-416C-BCCB-700B45E14695
Operation DOOR LOCK
DOOR UNLOCK
Intelligent Key system (using door
handle or back door request
switch)
HAZARD - twice
OUTSIDE CHIME - twice
HAZARD - once
OUTSIDE CHIME - once
Remote keyless entry system
(using
or button)
HAZARD - twice
HORN - once
HAZARD - once
HORN - none
Switching procedure (if equipped)
GUID-849C8DE2-DBF7-4AA6-90D4-DCA29B9DDF46
To switch the hazard indicator and horn (chime)
operation, push the LOCK
and UNLOCK
buttons on the Intelligent Key simultaneously for more
than 2.5 seconds.
. When the hazard indicator mode is set, the hazard
indicator flashes 3 times.
. When the hazard indicator and horn mode are set,
the hazard indicator flashes once and the horn
chirps once.
JI0469
Pre-driving checks and adjustments 3-19
Condition: 'Except for China'/

Related Topics

Pre-driving checks and adjustments
Keys Door locks Remote keyless entry system (if equipped) Security system Hood Back door Fuel filler lid Steering wheel Mirrors Parking brake

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot