2007-2012 Nissan X Trail SUV Safety ? seats, seat belts and supplemental restraint system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety ? seats, seat belts and supplemental restraint system for Your Nissan X Trail SUV Second Generation (2007-2012)

(19,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1 Safety — seats, seat belts and supplemental
restraint system
Seats
....
........................................................................................................... 1-2
Front seats
....
.......................................................................................... 1-2
Second row seats
....
............................................................................. 1-5
Third row seats (if equipped)
....
........................................................ 1-6
Armrest
....
................................................................................................ 1-7
Head restraints
....
......................................................................................... 1-7
Adjustable head restraint
....
................................................................ 1-7
Non-adjustable head restraint
....
....................................................... 1-7
Remove
....
................................................................................................ 1-8
Install
....
.................................................................................................... 1-8
Adjust
....
................................................................................................... 1-8
Seat belts
....
.................................................................................................. 1-9
Precautions on seat belt usage
....
.................................................... 1-9
Child safety
....
...................................................................................... 1-11
Pregnant women
....
............................................................................ 1-12
Injured persons
....
............................................................................... 1-12
Center mark on seat belts
....
........................................................... 1-12
Three-point type seat belts
....
....................................................... 1-12
Seat belt maintenance
....
............................................................... 1-13
Child restraints
....
..................................................................................... 1-14
Precautions on child restraint usage
....
...................................... 1-14
Universal child restraints for front seat and rear seats
(for Europe)
....
................................................................................... 1-15
ISOFIX child restraint system (for second row seats)
....
...... 1-19
Child restraint anchorage (for second row seats)
....
.............. 1-20
Child restraint installation using ISOFIX
....
................................ 1-20
Child restraint installation using 3-point type seat belt
....
..... 1-23
Supplemental Restraint System (SRS)
....
.......................................... 1-27
Precautions on Supplemental Restraint System (SRS)
....
.... 1-27
Supplemental air bag systems
....
................................................. 1-32
SRS air bag deployment conditions
....
....................................... 1-34
Pre-tensioner seat belt system
....
............................................... 1-36
Repair and replacement procedure
....
........................................ 1-37
Condition: 'Except for China'/
(20,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-2 Safety — seats, seat belts and supplemental restraint system
T32A130827-544A337B-5822-4F19-AD26-8D99DEA60151
SSS0133A
WARNING:
. Do not drive and/or ride in the vehicle with
the seatback reclined. This can be danger-
ous. The shoulder belt will not be properly
against the body. In an accident, you and
your passengers could be thrown into the
shoulder belt and receive neck or other
serious injuries. You and your passengers
could also slide under the lap belt and
receive serious injuries.
. For the most effective protection while the
vehicle is in motion, the seatback should be
upright. Always sit well back in the seat and
adjust the seat belt properly. (See “Seat
belts” (P.1-9).)
CAUTION:
When adjusting the seat positions, be sure not
to contact any moving parts to avoid possible
injuries and/or damages.
FRONT SEATS
T32A130827-F0BDEADE-E0E8-43E7-B8D5 -DAAAE46362C7
WARNING:
Do not adjust the driver’s seat while driving so
that full attention may be given to vehic le
operation.
Manual seat adjustment
T32A130827-44B2F3FC-EF1E-4159-AA42-22C9D53C6CFA
WARNING:
After adjusting a seat, gently shake the seat to
confirm that the seat is locked securely. If the
se at is not locked securely, it may move
suddenly and could cause the loss of control of
the vehicle.
SEATS
Condition: 'Except for China'/
(21,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
JVR0332X
Forward and backward:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
1. Pull up the adjusting lever
*
1
.
2. Slide the seat to the desired position.
3. Release the adjusting lever to lock the seat in
position.
Reclining:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
1. Pull up the adjusting lever
*
2
.
2. Tilt the seatback to the desired position.
3. Release the adjusting lever to lock the seatback in
position.
The reclining feature allows the adjustment of the
seatback for occupants of different sizes to help obtain
the proper seat belt fit. (See “Seat belts” (P.1-9).)
The seatback may be reclined to allow occupants to
rest when the vehicle is parked.
Seat lifter (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0333X
Pull up or push down the adjusting lever to adjust the
seat height until the desired position is achieved.
Power seat adjustment
T32A130827-8BB0095E-C954-4EA7-BCA6-E3736507277F
WARNING:
Never leave children or adults who would
normally require the support of others alone in
the vehicle. Pets should not be left alone either.
They could unknowingly activate switches or
controls and inadvertently become involved in a
serious accident and injure themselves.
Operating tips:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
. The power seat motor has an auto-reset overload
protection circuit. If the motor stops during the
seat adjustment, wait 30 seconds, then reactivate
the switch.
. To avoid discharge of the battery, do not operate
the power seats for a long period of time when the
engine is not running.
Safety — seats, seat belts and supplemental restraint system 1-3
Condition: 'Except for China'/
(22,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-4 Safety — seats, seat belts and supplemental restraint system
JVR0334X
Forward and backward:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
Move forward or backward the adjusting switch
*
1
to
the desired position.
Reclining:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
Move forward or backward the adjusting switch
*
2
to
the desired position.
The reclining feature allows the adjustment of the
seatback for occupants of different sizes to help obtain
the proper seat belt fit. (See “Seat belts” (P.1-9).)
The seatback may be reclined to allow occupants to
rest when the vehicle is parked.
Seat lifter (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0119X
Pull up or push down the adjusting switch to adjust the
seat height until the desired position is achieved.
Lumbar support (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
SSS1053
The lumbar support feature provides lower back
support to the driver.
Push each side of the adjusting switch to adjust the
seat lumbar area until the desired position is achieved.
Heated seats (if equipped)
T32A130827-12F30A00-21DA-4474-BB84-80C0B5836ADB
JVR0322X
The front seats can be warmed by built-in heaters. The
switches located on the center console can be
operated independently of each other.
1. Start the engine.
Condition: 'Except for China'/
(23,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2. Select heat range.
.
For high heat, push the HI (High) side of the
switch
*
1
.
.
For low heat, push the LO (Low) side of the
switch
*
2
.
.
The indicator light
*
3
will illuminate when low
or high is selected.
3. To turn off the heater, return the switch to the level
position. Make sure the indicator light turns off.
The heater is controlled by a thermostat, auto-
matically turning the heater on and off. The
indicator light will remain on as long as the switch
is on.
When the vehicle’s interior is warmed, or before
you leave the vehicle, be sure to turn off the
switch.
CAUTION:
. The battery could run down if the seat heater
is operated while the engine is not running.
. Do not use the seat heater for extended
periods or when no one is using the seat.
. Do not put anything on th e seat which
insulates heat, such as a blanket, cushion,
seat cover, etc. Otherwise, the seat may
become overheated.
. Do not place anything hard or heavy on the
seat or pierce it with a pin or similar object.
This may result in damage to the seat heater.
. Any liquid spilled on the heated seat should
be removed immediately with a dry cloth.
. When cleaning the seat, never use gasoline,
thinner, or any similar materials.
SECOND ROW SEATS
T32A130827-3C944850-5F36-4EC0-8FC1-B5D4740BE525
Adjustment
T32A130827-C4C3921B-4C08-4E61-8F01-E53BD4BE934E
JVR0330X
Forward and backward:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
1. Pull up the adjusting lever
*
1
.
2. Slide the seat to the desired position.
3. Release the adjusting lever
*
1
to lock the seat in
position.
Reclining:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
1. Pull the adjusting lever
*
2
.
2. Tilt the seatback to the desired position.
3. Release the adjusting lever
*
2
to lock th e
seatback in position.
The reclining feature allows the adjustment of the
seatback for occupants of different sizes to help obtain
the proper seat belt fit. (See “Seat belts” (P.1-9).)
The seatback may be reclined to allow occupants to
rest when the vehicle is parked.
JVR0376X
Folding:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
1. For vehicles not equipped with third row seat: Pull
up the lever
*
1
and fold the seatback flat.
For vehicles equipped with third row seat: Pull up
the lever
*
1
and pull the strap
*
2
on the lower
side of the outboard seats to fold the seatback flat.
2. To return the seats to a seating position, push up
on the seatback until it latches in place.
WARNING:
. Never allow anyone to ride in the luggage
area or on the rear seats when they are in
the fold-down position. Use of these areas
by passengers without proper restraints
could result in serious injury in an accident
or sudden stop.
. Do not fold down the second row seats when
occupants are in the second row seat area or
any luggage is on the second row seats.
. Properly secure all luggage to help prevent it
from sliding or shifting. Do not place lug-
gage higher than the seatbacks.
Safety — seats, seat belts and supplemental restraint system 1-5
Condition: 'Except for China'/
(24,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-6 Safety — seats, seat belts and supplemental restraint system
. When returning the seatbacks to the upright
position, be cert ain they are completely
secured in the latched position. If they are
not completely secured, passengers may be
injured in an accident or sudden stop.
Walk-in mechanism (Three-row model):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
The second row seats can tilt and slide for easy entry/
exit to/from the third row seats.
WARNING:
After operating the walk-in mechanism, be sure
to return the seat to the rearmost position and
then tilt up the seatback until it latches.
CAUTION:
. Whe n opera ting the walk-in mechanism,
push and hold the seatback and operate
slowly. If the seatback is tilted down quickly
and then allowed to slide, there is a risk that
it could contact your face or other parts of
your body, or pi nch your hand or foot,
causing injury.
. When operating the walk-in mechanism, be
sure not to contact any moving parts to
avoid possible injuries and/or damage.
. When operating the walk-in mechanism, be
sure tha t the second row seats are not
occupied by passengers and/or any objects
to avoid possible injuries and/or damage.
. Do not operate the walk-in mechanism with
objects, drinks, etc. on the seat. This may
cause objects to break or cause the passen-
ger room to be soiled.
JVR0355X
1. Pull the lever
*
1
to tilt down the seatback.
2. Slide the seat forward.
3. When returning the seat to its original position,
slide the seat backward, tilt the seatback up and
then secure it in place.
THIRD ROW SEATS (if equipped)
GUID-6AFED800-DD55-4234-8775-F187F0285680
Folding
GUID-F0E0E98B-1F35-427F-AE1C-9E5024C736F1
JVR0329X
To fold the third row seats flat for maximum cargo
capacity:
1. Make sure the head restraints are all the way
down.
2. Pull the strap
*
1
to release the seat.
3. Once released, push the seatback forward
*
2
.
To return the third row seats to a seating position:
Use the pull straps
*
1
to raise each seatback. Pull
back until the seatback latches into position. Make
sure to properly raise each seatback to an upright and
secured position.
WARNING:
When the seat is returned to the normal seating
position, the head restraints must be returned to
the upright position to properly protect vehicle
occupants.
Condition: 'Except for China'/
(25,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
ARMREST
GUID-0CFA7136-CE0F-460F-B8C8-64D55ED211DE
Pull the armrest down until it rests on the seat cushion.
JVR0337X
Second row seats
Fold down the armrest while pulling the strap until it
rests on the seat cushion.
T32A130827-DB0E9BDD-2C29-4173-B3C0-5A08C9BDE199
WARNING:
Head restraints supplement the other vehicle
safety syst ems. They may provide additional
protection against injury in certain rear end
collisions. Adjustable head restraints must be
adjusted properly, as specified in this section.
Check the adjustment after someone else uses
the seat. Do not attach anything to the head
restraint stalks or remove the head restraint. Do
not use the seat if the head restraint has been
removed. If the head restraint was removed,
reinstall and properly adjust the head restraint
before an occupant uses the seating position.
Failure to follow these instructions can reduce
the effectiveness of the head restraint. This may
increase the risk of serious injury or death in a
collision.
. Your vehicle is equipped with a head restraint that
may be integrated, adjustable or non-adjustable.
. Adjustable head restraints have multiple notches
along the stalk to lock them in a desired
adjustment position.
. The non-adjustable head restraints have single
locking notch to secure them to the seat frame.
. Proper Adjustment:
— For the adjustable type, align the head restraint
so the center of your ear is approximately level
with the center of the head restraint.
— If your ear position is still higher than the
recommen ded alignment, place the head
restraint at the highest position.
. If the head restraint has been removed, ensure
that it is reinstalled and locked in place before
riding in that designated seating position.
ADJUSTABLE HEAD RESTRAINT
T32A130827-C9F74993-858A-41B5-9556-616AFC9796BA
SSS0992
1. Removable head restraint
2. Multiple notches
3. Lock knob
4. Stalks
NON-ADJUSTABLE HEAD RESTRAINT
T32A130827-2CDD1BB5-1601-41B1-8E92-E1A700D921F6
JVR0203X
1. Removable head restraint
2. Single notch
3. Lock knob
Safety — seats, seat belts and supplemental restraint system 1-7
HEAD RESTRAINTS
Condition: 'Except for China'/
(26,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-8 Safety — seats, seat belts and supplemental restraint system
4. Stalks
REMOVE
T32A130827-492400AE-FA4A-4337-994A-64826B9647C6
SSS1037
Use the following procedure to remove the head
restraint.
1. Pull the head restraint up to the highest position.
2. Push and hold the lock knob.
3. Remove the head restraint from the seat.
4. Store the head restraint properly in a secure place
so it is not loose in the vehicle.
5. Reinstall and properly adjust the head restraint
before an occupant uses the seating position.
INSTALL
T32A130827-AC0F950A-602B-45AB-9D97-17CEDE4AA04D
SSS1038
1. Align the head restraint stalks with the holes in the
seat. Make sure that the head restraint is facing
the correct direction. The stalk with the adjustment
notch
*
1
must be installed in the hole with the
lock knob
*
2
.
2. Push and hold the lock knob and push the head
restraint down.
3. Properly adjust the head restraint before an
occupant uses the seating position.
ADJUST
T32A130827-ED3FF471-57AE-4DB8-96D1-FF8165FFA3F4
SSS0997
For adjustable head restraint
Adjust the head restraint so the center is level with the
center of your ears. If your ear position is still higher
than the recommended alignment, place the head
restraint at the highest position.
JVR0259X
For non-adjustable head restraint
Make sure the head restraint is positioned from the
stored position or any non-latch position so the lock
knob is engaged in the notch before riding in that
designated seating position.
Raise
T32A130827-21BF58C9-E66B-43AB-8465-6BA3A92920D4
SSS1035
Type A
To raise the head restraint, pull it up.
Condition: 'Except for China'/
(27,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
SSS1037
Type B
To raise the head restraint, push and hold the lock
knob. Then, pull it up.
Make sure the head restraint is positioned from the
stored position or any non-latch position so the lock
knob is engaged in the notch before riding in that
designated seating position.
Lower
T32A130827-FA4C1475-83A4-4F07-AB5A-232C4EC6648D
SSS1036
To lower, push and hold the lock knob and push the
head restraint down.
Make sure the head restraint is positioned so the lock
knob is engaged in the notch before riding in that
designated seating position.
T32A130827-70A68760-75B8-47F3-AB2C-B69D82C30139
PRECAUTIONS ON SEAT BELT USAGE
T32A130827-2F565D7D-05DE-4FB6-B3C3-300FCA1D36C5
If you are wearing the seat belt properly adjusted and
sitting upright and well back in the seat, chances of
being injured or killed in an accident and/or the severity
of injury may be greatly reduced. NISSAN strongly
encourages you and all of your passengers to buckle
up every time you drive, even if your seating position
includes the supplemental air bag systems.
Safety — seats, seat belts and supplemental restraint system 1-9
SEAT BELTS
Condition: 'Except for China'/
(28,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-10 Safety — seats, seat belts and supplemental restraint system
SSS0134A
SSS0136A
SSS0014 SSS0016
WARNING:
. Seatbelts are designed to bear upon the
bony structure of the body, and should be
worn low across the front of the pelvis or the
pelvis, chest and shoulders, as applicable;
wearing the lap section of the belt across
the abdominal area must be avoided. Ser-
ious injury may occur if a seat belt is not
worn properly.
. Position the lap belt as low and snug as
possible around the hips, not the waist. A
lap belt worn too high could increase the
risk of internal injuries in an accident.
. Do not allow more than one person to use
the same seat belt. Each belt assembly must
only be used by one occupant; it is danger-
ous to put a belt around a child being carried
on the occupant’s lap.
. Never carry more people in the vehicle than
there are seat belts.
. Never wear seat belts inside out. Belts
should not be worn wit h straps twisted.
Doing so may reduce their effectiveness.
. Seatbelts should be adjusted as firmly as
possible, consistent with comfort, to provide
the protection for which they have been
designed. A slack belt will greatly reduce the
protection afforded to the wearer.
. Every person who drives or rides in this
vehicle should use a seat belt at all times.
Children should be properly restrained in the
rear seat and, if appropriate , in a child
restraint system.
Condition: 'Except for China'/
(29,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
. Do not run the belt behind your back or
under your arm. Always route the shoulder
belt over your shoulder and across your
chest. The belt should be away from your
face and neck, but not falling off your
shoulder. Serious injury may occur if a seat
belt is not worn properly.
. No modifications or additions s hould be
made by the user which will either prevent
the seat belt adjusting devices from operat-
ing to remove slack, or prevent the seat belt
assembly from being adjusted to remove
slack.
. Care should be taken to avoid contamina-
tion of the webbing with polishes, oils and
chemicals, and particularly battery acid.
Cleaning may safely be carried out using
mild soap and water. The belt should be
replaced if webbing becomes frayed, con-
taminated or damaged.
. All seat belt assemblies including retractors
and attaching hardware should be inspected
after any col lision by a NISSAN dealer.
NISSAN recommends that all seat belt
assemblies in use during a collision be
replaced un less the collision was minor
and the belts show no damage and continue
to operate properly. Seat belt assemblies
not in use during a collision should also be
inspected and, when necessary, replaced if
either damage or improper operation is
noted.
. It is essential to replace the entire assembly
after it has been worn in a severe impact
even if damage to the assembly is not
obvious.
. Once the pre-tensioner seat belt has acti-
vated, it cannot be reu sed. It must be
replaced together with the retractor. Contact
a NISSAN dealer.
. Removal and installation of the pre-ten-
sioner seat belt system components should
be done by a NISSAN dealer.
CHILD SAFETY
T32A130827-21B0DB95-14A2-473E-92AA-1384BE5E3511
WARNING:
. Infants and children need special protection.
The vehicle’s seat belts may not fit them
properly. The shoulder belt may come too
close to the face or neck. The lap belt may
not fit over their small hipbones. In an
accident, an improperly fitted seat belt could
cause serious or fatal injury.
. Always use an appropriate child restraint
system.
Children need adults to help protect them. They need
to be properly restrained. The proper restraint depends
on the child’s size.
Infants and small children
T32A130827-062F78D7-5A66-41DD-980F-C2B540812034
SSS0099
NISSAN recommends that infants and small children
be seated in a child restraint system. You should
choose a child restraint system that fits your vehicle
and the child, and always follow the manufacturer’s
instructions for installation and use.
Large children
T32A130827-080B8EE5-AA4F-4AF7-AC3E-2E920E4076D3
WARNING:
. Never allow children to stand or kneel on
any seats.
. Never allow children in the cargo areas while
the vehicle is moving. A child could be
seriously injured in an accident or sudden
stop.
Children who are too large for a child restraint system
should be seated and restrained by the seat belts that
are provided.
If the child’s seating position has a shoulder belt that
fits close to the face or neck, the use of a booster seat
(commercially available) may help overcome this. The
booster seat should raise the child so that the shoulder
belt is properly positioned across the top, middle
portion of the shoulder and the lap belt is low on the
hips. The booster seat should also fit the vehicle seat.
Once the child has grown so that the shoulder belt is
no longer on or near the face or neck of the child, use
the shoulder belt without the booster seat. In addition,
there are many types of child restraint systems
available for larger children that should be used for
maximum protection.
Safety — seats, seat belts and supplemental restraint system 1-11
Condition: 'Except for China'/
(30,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-12 Safety — seats, seat belts and supplemental restraint system
PREGNANT WOMEN
T32A130827-A867B9F9-1F54-4C43-BDBA-D95D9ECBC7C9
NISSAN recommends that pregnant women use seat
belts. The seat belt should be worn snug, and always
position the lap belt as low as possible around the
hips, not the waist. Place the shoulder belt over your
shoulder and across your chest. Never run the lap/
shoulder belt over your abdominal area. Contact your
doctor for specific recommendations.
INJURED PERSONS
T32A130827-0BA2B1BE-CCEE-4963-85CA-E7F2231B869A
NISSAN recommends that injured persons use seat
belts. Contact your doctor for specific recommenda-
tions.
CENTER MARK ON SEAT BELTS
T32A130827-0794F2A3-5762-4467-B86E-B51DB80CB0A0
Selecting correct set of seat belts
T32A130827-82DC900D-2C78-496F-838E-D2570976281A
SSS0671
The center seat belt buckle is identified by the
CENTER mark. The center seat belt tongue can be
fastened only into the center seat belt buckle.
THREE-POINT TYPE SEAT BELTS
T32A130827-4BC79D60-6662-49C4-A68D-826748688021
SSS0292
WARNING:
Every person who drives or rides in this vehicle
should use a seat belt at all times.
Fastening seat belts
T32A130827-2B97C5AF-CA20-4A75-9D52-7A34F4DFC205
WARNING:
The seatback should not be in a reclined
position any more than needed for comfort. Seat
belts are most effective when the passenger sits
well back and straight up in the seat.
1. Adjust the seat. (See “Seats” (P.1-2).)
2. Slowly pull the seat belt out of the retractor and
insert the tongue into the buckle until you hear and
feel the latch engage.
.
The retractor is designed to lock during a
sudden stop or on impact. A slow pulling
motion permits the seat belt to move, and
allows you some freedom of movement in
the seat.
.
If the seat belt cannot be pulled from its
fully retracted position, firmly pull the belt
and release it. Then smoothly pull the belt
out of the retractor.
SSS0467
3. Position the lap belt portion low and snug on the
hips as shown.
4. Pull the shoulder belt portion toward the retractor
to take up extra slack. Be sure the shoulder belt is
routed over your shoulder and is snug across your
chest.
Shoulder belt height adjustment (if equipped)
T32A130827-976237C8-B793-46BA-8839-54E163FF3DEE
SSS0351A
Condition: 'Except for China'/
(31,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
WARNING:
. The shoulder belt anchor height should be
adjusted to the position best for you. Failure
to do so may reduce the effectiveness of the
entire restraint system and increase the
chance or severity of injury in an accident.
. The shoulder belt should rest on the middle
of the shoulder. It must not rest against the
neck.
. Be sure that the seat belt is not twisted in
any way.
. Be sure that the shoulder belt anchor is
secured by trying to move the shoulder belt
anchor up and down after adjustment.
The shoulder belt anchor height should be adjusted to
the position best for you.
The belt should be away from your face and neck, but
not falling off your shoulder.
To adjust, pull the release button
*
1
and move the
shoulder belt anchor to the proper position
*
2
, so that
the belt passes over the center of the shoulder.
Release the button to lock the shoulder belt anchor
into position.
Unfastening seat belts
T32A130827-6CC264E9-D8AD-4962-9D73-34F9C8D92938
Push the button on the buckle. The seat belt
automatically retracts.
Belt hook (if equipped)
T32A130827-702349E6-D2F9-4807-B5A0-7C9EC0BE7832
JVR0353X
Seat belt can be hooked on the belt hook.
Checking seat belt operation
T32A130827-71A5C13C-A297-4A48-8CD6-FB07919F9DB4
Seat belt retractors are designed to lock seat belt
movement:
. When the seat belt is pulled quickly from the
retractor.
. When the vehicle slows down rapidly.
To increase your confidence in the seat belts, check
the operation by grasping the shoulder belt and pulling
forward quickly. The retractor should lock and restrict
further belt movement. If the retractor does not lock
during this check, contact a NISSAN dealer immedi-
ately.
SEAT BELT MAINTENANCE
T32A130827-09199535-EE25-4EAC-9D54-D0AED305C354
Periodically check that the seat belt and all the metal
components, such as buckles, tongues, retractors,
flexible wires and anchors, work properly. If loose parts,
deterioration, cuts or other damage on the seat belt
webbing is found, the entire seat belt assembly should
be replaced.
If dirt builds up in the shoulder belt guide of the seat
belt anchors, the seat belts may retract slowly. Wipe
the shoulder belt guide with a clean, dry cloth.
To clean the seat belt webbing, apply a mild soap
solution or any solution recommended for cleaning
upholstery or carpet. Then wipe with a cloth and allow
the seat belts to dry in the shade. Do not allow the seat
belts to retract until they are completely dry.
Safety — seats, seat belts and supplemental restraint system 1-13
Condition: 'Except for China'/
(32,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-14 Safety — seats, seat belts and supplemental restraint system
T32A130827-B9F2FCE8-C8FF-4419-9D1B-47BBBEB817B8
PRECAUTIONS ON CHILD RESTRAINT
USAGE
T32A130827-A2A55D3D-261B-4822-A5C9-B00E94E8AA4A
SSS0099
WARNING:
. Infants and small children should always be
placed in an appropriate child restraint while
riding in the vehicle. Failure to use a child
restraint can result in serious injury or death.
. Infants and small children should never be
carried on your lap. It is not possible for even
the strongest adult to resist the forces of a
severe accident. The child could be crushed
between the adult and parts of the vehicle.
Also, do not put the same seat belt around
both your child and yourself.
. NISSAN recommen ds that the child re-
straints be installed in the rear seat. Accord-
ing to accident statistics, children are safer
when properly restrained in the rear seat
than in the front seat.
. Improper use or improper installation of a
child restraint can increase the risk or
severity of injury for both the child and other
occupants of the vehicle and can lead to
serious injury or death in an accident.
. Follow all of the child restraint manufac-
turer’s instructions for installation and use.
When purchasing a child restraint, be sure to
select one which wil l fit your child and
vehicle. It may not be possible to properly
install some types of child restraint in your
vehicle.
. The direction of the child restraint, either
front-facing or rear-facing, depends on the
type of the child restraint and the size of the
child. Refer to the child restraint manufac-
turer’s instructions for details.
. Adjustable seatbacks should be positioned
to ensure full contact between child restraint
and seatback.
. After attaching a child restraint, test it
before you place the child in it. Push it from
side to side and tug it forward to make sure
that it is held securely in place. The child
restraint should not move more than 25 mm
(1 in). If the restraint is not secure, tighten
the belt as necessary, or install the restraint
in another seat and test it again.
. When the child restraint is not in use, keep it
secured wi th the ISOFIX child r estraint
system or a seat belt to prevent it from
being thrown around in case of a sudden
stop or accident.
. Never install a rear-facing child restraint on
the front passenger’s seat when the front
passenger’s air bag is available. Supple-
mental front-impact air bags inflate with
great force. A re ar-facing chil d restraint
could be struck by the supplemental front-
impact air bags in an accident and could
seriously injure or kill your child.
. If the seat belt in the position where a child
restraint is installed requires a locking
device and if it is not used, injuries could
result from a child restraint tipping over
during normal vehicle braking or cornering.
CAUTION:
Remember that a child restraint left in a closed
vehicle can become very hot. Check the seating
surface and buckles before placing your child in
a child restraint.
NISSAN recommends that infants and small children
be seated in a child restraint. You should choose a
child restraint that fits your vehicle and always follow
the manufacturer’s instructions for installation and use.
In addition, there are many types of child restraints
available for larger children that should be used for
maximum protection.
CHILD RESTRAINTS
Condition: 'Except for China'/
(33,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
UNIVERSAL CHILD RESTRAINTS FOR
FRONT SEAT AND REAR SEATS (for Eur-
ope)
GUID-9BFC6C9D-8671-4D95-8AAD-9E4C6 F1D11F9
When selecting any child restraint, keep the following
points in mind:
. Choose a child restraint that complies with the
latest European safety standard, ECE Regulation
44.04.
. Place your child in the child restraint and check
the various adjustments to be sure the child
restraint is compatible with your child. Always
follow all of the recommended procedures.
. Check the child restraint in your vehicle to be sure
it is compatible with vehicle’s seat belt system.
. Refer to the tables later in this section for a list of
the recommended fitment positions and th e
approved child restraints for your vehicle.
Mass group of child seat
GUID-40AF683E-378A-45A8-9406-AEFC4F5E6253
Mass group Child’s weight
Group 0 up to 10 kg
Group 0+ up to 13 kg
Group I 9 to 18 kg
Group II 15 to 25 kg
Group III 22 to 36 kg
Kind of child seats (example):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0371X
Child safety seat categories 0 and 0+
JVR0372X
Child safety seat categories 0+ and I
JVR0373X
Child safety seat categories II and III
Safety — seats, seat belts and supplemental restraint system 1-15
Condition: 'Except for China'/
(34,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-16 Safety — seats, seat belts and supplemental restraint system
Approved child restraint positions
GUID-DF58DF92-1D8E-4F79-923D-075F501C68B5
The following restriction is applied when using child restraints varying by infants weight and installation position.
Mass group
Suitability
Front passen-
ger seat
(Air bag ON)
Front passen-
ger seat
(Air bag OFF)
2nd row outer
seat
2nd row cen-
ter seat
3rd row seat
0
<10 kg X X U*2 X
X
0+
<13 kg X L*2 U/L*2 X
X
I
9 - 18 kg X L*2 U*2 X
X
II
15 - 25 kg X L*1*2 UF/L*1*2 X
X
III
22 - 36 kg X L*1*2 UF/L*1*2 X
X
X: not suitable for child restraint system
U: suitable for universal category child restraint system approved for this weight group
UF: suitable for forward-facing universal category child restraint system approved for this weight group
L: suitable for particular child restraints given on attached list or vehicle list of child restraint manufacturer
*1: If you install the child seat, remove the head restraint.
*2: If you install the child seat, set to most rearward slide position.
Condition: 'Except for China'/
(35,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Permissible options for fitting an ISOFIX child restraint
GUID-63DAAD91-D73B-44B5-94DE-8ED73D4FD718
Mass group
Suitability
Front passen-
ger seat
2nd row outer
seat
2nd row cen-
ter seat
3rd row seat
Carry-cot
F ISO/L1 X X X
X
G ISO/L2 X X X
X
0+ (<10 kg)
E ISO/R1 X IL* X
X
0+ (<13 kg)
E ISO/R1 X IL X
X
D ISO/R2 X IL* X
X
C ISO/R3 X IL X
X
I (9 - 18 kg)
D ISO/R2 X IL* X
X
C ISO/R3 X IL X
X
B ISO/F2 X IUF X
X
B1 ISO/F2X X IL*1/IUF X
X
A ISO/F3 X IUF X
X
II (15 - 25 kg)
— — X IL X
X
III (22 - 36 kg)
— — X IL X
X
X: not suitable for child restraint system
IUF: suitable for universal category forward facing child restraint system approved for this weight group
IL: suitable particular ISOFIX category child restraint system (CRS) given in the below list or vehicle list of child
seat manufacturer.
IL*: suitable particular ISOFIX category child restraint system (CRS) given in the vehicle list of child seat
manufacturer.
*1: If you install the child seat, remove the head restraint.
Safety — seats, seat belts and supplemental restraint system 1-17
Condition: 'Except for China'/
(36,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-18 Safety — seats, seat belts and supplemental restraint system
List of Universal recommended child restraints
GUID-D1711338-0781-4CF0-82F5-1311F7C88CE3
Front passenger
seat
(Air bag OFF)
2nd row outer seat 2nd row center seat
3rd row seat
0+ (<13 kg) Maxi Cosi Cabrio Fix Maxi Cosi Cabrio Fix —
—
I (9 - 18 kg)
Ro
¨
mer King plus Ro
¨
mer King plus —
—
— Ro
¨
mer Duo plus —
—
II (15 - 25 kg)
Ro
¨
mer Kid fix
(belt mounted)
Ro
¨
mer Kid fix
(belt mounted)
—
—
III (22 - 36 kg)
Ro
¨
mer Kid fix
(belt mounted)
Ro
¨
mer Kid fix
(belt mounted)
—
—
List of Semi-universal recommended child restraints
GUID-B6C94BDF-4BF8-4D62-9D16-730E01E411D6
Front passenger seat
(Air bag OFF)
2nd row outer seat
2nd row center
seat
3rd row seat
0+ (<13 kg)
Maxi Cosi Cabrio Fix
plus
Easy Fix
Maxi Cosi Cabrio Fix
plus
Easy Fix
—
—
—
Maxi Cosi Cabrio Fix
plus
Easy Fix Base
—
—
I (9 - 18 kg) —
Maxi Cosi pearl plus
family fix
—
—
II (15 - 25 kg) —
Ro
¨
mer Kid fix
(ISOFIX mounted)
—
—
III (22 - 36 kg) —
Ro
¨
mer Kid fix
(ISOFIX mounted)
—
—
Condition: 'Except for China'/
(37,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
List of approved child restraints
GUID-49B2FDAC-9DF6-4A61-9D26-15EFC8DF35E9
Name of CRS Fixture of CRS Facing position
Category
0+ (<13 kg)
Ro
¨
mer Baby safe
plus SHR II+ ISO-
FIX base
ISOFIX + base and
support leg
Rear facing
Semi-universal
I (9 - 18 kg)
Be safe IZI kid X3
iso fix
ISOFIX+support leg Rear facing
Semi-universal
ISOFIX CHILD RESTRAINT SYSTEM (for
second row seats)
T32A130827-874B1376-633A-4872-A5DC-1561E1E4E5DA
JVR0351X
ISOFIX label location
Your vehicle is equipped with special anchor points
that are used with ISOFIX child restraint systems.
ISOFIX lower anchor point locations
T32A130827-8C1B0C96-3669-40A1-9516-D03E5D85D146
The ISOFIX anchor points are provided to install child
restraints in the second row outboard seating positions
only. Do not attempt to install a child restraint in
the center seating position using the ISOFIX
anchors.
SSS0637
ISOFIX lower anchor location
The ISOFIX anchors are located at the rear of the seat
cushion near the seatback. A label is attached to the
seatback to help you locate the ISOFIX anchors.
ISOFIX child restraint anchor attachments
T32A130827-F2AC3D59-1715-4B14-9A8F-18AD912C0E4A
SSS0644
Anchor attachment
ISOFIX child restraints include two rigid attachments
that can be connected to two anchors located in the
seat. With this system, you do not have to use a vehicle
seat belt to secure the child restraint. Check your child
restraint for a label stating that it is compatible with the
ISOFIX child restraints. This information may also be in
the instructions provided by the child restraint manu-
facturer.
ISOFIX child restraints generally require the use of a
top tether strap or other anti-rotation devices such as
support legs. When installing ISOFIX child restraints,
carefully read and follow the instructions in this manual
and those supplied with the child restraints. (See
“Child restraint installation using ISOFIX” (P.1-20).)
Safety — seats, seat belts and supplemental restraint system 1-19
Condition: 'Except for China'/
(38,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-20 Safety — seats, seat belts and supplemental restraint system
CHILD RESTRAINT ANCHORAGE (for sec-
ond row seats)
T32A130827-2B9CCB11-46FB-4315-B086-05B2E330A092
Your vehicle is designed to accommodate a child
restraint syste m on the second row seat. When
installing a child restraint system, carefully read and
follow the instructions in this manual and tho se
supplied with the child restraint system.
WARNING:
. Child restraint anchorages are designed to
withstand only those loads imposed by
correctly fitted child r es tra in ts. Under no
circumstances are they to be used for adult
seat belts, harnesses or for attaching other
items or equipment to the vehicle. Doing so
could damage the child restraint an-
chorages. The child restraint will not be
properly installed using the damaged an-
chorage, and a child could be seriously
injured or killed in a collision.
. The child restraint top tether strap may be
damaged by contact with the tonneau cover
(if equipped) or items in the luggage area.
Remove the tonneau cover from the vehicle
or secure it and any luggage. Your child
could be seriously injured or killed in a
collision if the top tether strap is damaged.
Anchorage location
T32A130827-22786013-5A06-4566-964F-9F5FF4AF1009
JVR0326X
Type A
JVR0366X
Type B (example)
Anchorages are located as illustrated.
Position the top tether strap over the top of the
seatback and secure it to the tether anchorage that
provides the straightest installation. Tighten the tether
strap according to the manufacturer’s instruction to
remove any slack.
CHILD RESTRAINT INSTALLATION USING
ISOFIX
T32A130827-8C4D268B-3C47-4D79-AE65-5ADCF8852558
WARNING:
. Attach ISOFIX child restraints only at the
specified locations. For the ISOFIX lower
anchor locations, see “ISOFIX child restraint
system (for second row seats)” (P.1-19). If a
child restraint is not secured properly, your
child could be seriously injured or killed in
an accident.
. Do not install child restraints that require the
use of a top tether strap to seating positions
that do not have a top tether anchor.
. Do not secure a child restraint in the center
rear seating position using the ISOFIX lower
anchors. The child restraint will not be
Condition: 'Except for China'/
(39,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
secured properly.
. Inspect the lower anchors by inserting your
fingers i nto the lower anchor a rea and
feeling to make sure there are no obstruc-
tions over the ISOFIX anchors, such as seat
belt webbing or seat cushion material. The
child restraint will not be secured properly if
the ISOFIX anchors are obstructed.
. Child restraint anchorages are designed to
withstand only those loads imposed by
correctly fitted child r es tra in ts. Under no
circumstance are they to be used for adult
seat belts, harnesses or for attaching other
items or equipment to the vehicle. Doing so
could damage the child restraint an-
chorages. The child restraint will not be
properly installed using the damaged an-
chorage, and a child could be seriously
injured or killed in a collision.
Installation on rear outboard seats
T32A130827-AE43E959-BB5F-4CFD-A4FA-CDEC3959EDC4
SSS0646A
Steps 1 and 2
Front-facing:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
Be sure to follow the manufacturer’s instructions for
the proper use of your child restraint. Follow these
steps to install a front-facing child restraint on the
second row outboard seats using ISOFIX:
1. Position the child restraint on the seat
*
1
.
2. Secure the child restraint anchor attachments to
the ISOFIX lower anchors
*
2
.
3. For Europe (Mass group I-F2X):
The back of the child restraint should be secured
against the vehicle seatback. The head restraint
should be removed to obtain the correct child
restraint fit. Store the head restraint in a secure
place. Be sure to install the head restraint when
the child restraint is removed. (See “Head
restraints” (P.1-7), “Universal child restraints for
front seat and rear seats” (P.1-15).)
For Europe (except for Mass group I-F2X):
Except for Europe:
The back of the child restraint should be secured
against the vehicle seat back. If necessary, adjust
or remove the head restraint to obtain the correct
child restraint fit. If the head restraint is removed,
store it in a secure place. Be sure to install the
head restraint when the child restraint is removed.
If the seating position does not have an adjustable
head restraint and it is interfering with the proper
child restraint fit, try another seating position or a
different child restraint. (See “Head restraints”
(P.1-7), “Universal child restraints for front seat
and rear seats” (P.1-15).)
SSS0754A
Step 4
4. Shorten the rigid attachment to have the child
restraint firmly tightened; press downward
*
3
and rearward
*
4
firmly in the center of the child
restraint with your knee to compress the vehicle
seat cushion and seatback. Adjustable seatbacks
should be positioned to ensure full contact
between child restraint and seatback.
5. If the child restraint is equipped with a top tether
strap, route the top tether strap and secure the
tether strap to the tether anchor point. (See “Child
restraint anchorage (for second row seats)” (P.1-
20).)
6. If the child restraint is equipped with other anti-
rotation devices such as support legs, use them
instead of the top tether strap following the child
restraint manufacturer’s instructions.
Safety — seats, seat belts and supplemental restraint system 1-21
Condition: 'Except for China'/
(40,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-22 Safety — seats, seat belts and supplemental restraint system
SSS0755A
Step 7
7. Test the child restraint before you place the child
in it
*
5
. Push the child restraint from side to side
and tug it forward to make sure that it is held
securely in place.
8. Check to make sure that the child restraint is
properly secured prior to each use. If the child
restraint is loose, repeat steps 3 through 7.
Rear-facing:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
SSS0649A
Steps 1 and 2
Be sure to follow the manufacturer’s instructions for
the proper use of your child restraint. Follow these
steps to install a rear-facing child restraint on the
second row outboard seats using ISOFIX:
1. Position the child restraint on the seat
*
1
.
2. Secure the child restraint anchor attachments to
the ISOFIX lower anchors
*
2
.
SSS0756A
Step 3
3. Shorten the rigid attachment to have the child
restraint firmly tightened; press downward
*
3
and rearward
*
4
firmly in the center of the child
restraint with your hand to compress the vehicle
seat cushion and seatback.
4. If the child restraint is equipped with a top tether
strap, route the top tether strap and secure the
tether strap to the tether anchor point. (See “Child
restraint anchorage (for second row seats)” (P.1-
20).)
5. If the child restraint is equipped with other anti-
rotation devices such as support legs, use them
instead of the top tether strap following the child
restraint manufacturer’s instructions.
SSS0757A
Step 6
6. Test the child restraint before you place the child
in it
*
5
. Push the child restraint from side to side
and tug it forward to make sure that it is held
securely in place.
7. Check to make sure that the child restraint is
properly secured prior to each use. If the child
restraint is loose, repeat steps 3 through 6.
Condition: 'Except for China'/
(41,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
CHILD RESTRAINT INSTALLATION USING
3-POINT TYPE SEAT BELT
T32A130827-A9515302-9112-4FC5-83E2-EA3AC508586D
Installation on rear seats - without automatic
locking mode
T32A130827-96EF54C8-3581-4C46-8949-7876F5EB6CBB
Front-facing:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
SSS0758A
Step 1
Be sure to follow the manufacturer’s instructions for
the proper use of your child restraint. Follow these
steps to install a front-facing child restraint on the rear
seats using 3-point type seat belt without automatic
locking mode:
1. Position the child restraint on the seat
*
1
.
2. Installation on rear outboard seats (for
Europe (Mass group II and III)):
Remove the head restraint. (See “Head restraints”
(P.1-7), “Universal child restraints for front seat
and rear seats” (P.1-15).)
Installation on rear outboard seats (for
Europe (except for Mass group II and III)):
Installation on rear outboard seats (except
for Europe):
Adjust the head restraint to its highest position.
(See “Head restraints” (P.1-7), “Universal child
restraints for front seat and rear seats” (P.1-15).)
SSS0493A
Step 3
3. Route the seat belt tongue through the child
restraint and insert it into the buckle
*
2
until you
hear and feel the latch engage.
4. To prevent slack in the seat belt webbing, it is
necessary to secure the seat belt in place with
locking devices attached to the child restraint.
SSS0647A
Step 5
5. Remove any additional slack from the seat belt;
press downward
*
3
and rearward
*
4
firmly in
the center of the child restraint with your knee to
compress the vehicle seat cushion and seatback
while pulling up on the seat belt. Adjustable
seatbacks should be positioned to ensure full
contact between child restraint and seatback.
SSS0638A
Step 6
6. Test the child restraint before you place the child
in it
*
5
. Push the child restraint from side to side
and tug it forward to make sure that it is held
securely in place.
7. Check to make sure that the child restraint is
properly secured prior to each use. If the child
restraint is loose, repeat steps 3 through 5.
Rear-facing:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
SSS0759A
Step 1
Be sure to follow the manufacturer’s instructions for
the proper use of your child restraint. Follow these
Safety — seats, seat belts and supplemental restraint system 1-23
Condition: 'Except for China'/
(42,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-24 Safety — seats, seat belts and supplemental restraint system
steps to install a rear-facing child restraint on the rear
seats using 3-point type seat belt without automatic
locking mode:
1. Position the child restraint on the seat
*
1
.
SSS0654A
Step 2
2. Route the seat belt tongue through the child
restraint and insert it into the buckle
*
2
until you
hear and feel the latch engage.
3. To prevent slack in the seat belt webbing, it is
necessary to secure the seat belt in place with
locking devices attached to the child restraint.
SSS0639A
Step 4
4. Remove any additional slack from the seat belt;
press downward
*
3
and rearward
*
4
firmly in
the center of the child restraint with your hand to
compress the vehicle seat cushion and seatback
while pulling up on the seat belt.
SSS0658A
Step 5
5. Test the child restraint before you place the child
in it
*
5
. Push the child restraint from side to side
and tug it forward to make sure that it is held
securely in place.
6. Check to make sure that the child restraint is
properly secured prior to each use. If the child
restraint is loose, repeat steps 3 through 5.
Condition: 'Except for China'/
(43,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Installation on front passenger’s seat
T32A130827-3CDB1AED-379E-4B81-B7D9-2F7BF07A419F
JVR0285X
For Europe (Mass group II and III)
SSS0300A
For Europe (except for Mass group II and III) and except for Europe
WARNING:
. Never install a rear-facing child restraint on
the front passenger’s seat when the front
passenger’s air bag is available. Supple-
mental front-impact air bags inflate with
great force. A re ar-facing chil d restraint
could be struck by the supplemental front-
impact air bags in an accident and could
seriously injure or kill your child.
. Never install a child restraint with a top
tether strap on the front seat.
. NISSAN recommends that a child restraint
be installed on the rear seat. However, if you
must install a child restraint on the front
passenger’s seat, move the passenger’s seat
to the rearmost position.
. Child restraints for infants must be used in
the rear-facing direction and therefore must
not be used on the front passenger’s seat
when the front passenger’s air bag is avail-
able.
Front-facing:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
Be sure to follow the manufacturer’s instructions for
the proper use of your child restraint. Follow these
steps to install a front-facing child restraint on the front
passenger’s seat using 3-point type seat belt without
automatic locking mode:
1. Turn off the front passenger’s air bag using the
front passenger air bag switch (if equipped). (See
“Supplemental air bag systems” (P.1-32).) Place
the ignition switch in the “ON” position and make
sure that the front passenger air bag status light
(OFF) illuminates. (if equipped)
SSS0627
Steps 2 and 3
2. Move the seat to the rearmost position
*
1
.
3. For Europe (Mass group II and III):
Remove the head restraint
*
2
. (See “Head
restraints” (P.1-7), “Universal child restraints for
front seat and rear seats” (P.1-15).)
For Europe (except for Mass group II and III):
Except for Europe:
Adj ust the head restraint
*
2
to its highest
Safety — seats, seat belts and supplemental restraint system 1-25
Condition: 'Except for China'/
(44,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-26 Safety — seats, seat belts and supplemental restraint system
position. (See “Head restraints” (P.1-7), “Univer-
sal child restraints for front seat and rear seats”
(P.1-15).)
4. Position the child restraint in the seat.
SSS0360C
Step 5
5. Route the seat belt tongue through the child
restraint and insert it into the buckle
*
3
until you
hear and feel the latch engage.
6. To prevent slack in the seat belt webbing, it is
necessary to secure the seat belt in place with
locking devices attached to the child restraint.
SSS0647B
Step 7
7. Remove any additional slack from the seat belt;
press downward
*
4
and rearward
*
5
firmly in
the center of the child restraint with your knee to
compress the vehicle seat cushion and seatback
while pulling up on the seat belt.
JVR0286X
Step 8 (for Europe (Mass group II and III))
SSS0302G
Step 8 (For Europe (except for Mass group II and III) and
except for Europe)
8. Test the child restraint before you place the child
in it
*
6
. Push the child restraint from side to side
and tug it forward to make sure that it is held
securely in place.
9. Check to make sure that the child restraint is
properly secured prior to each use. If the child
restraint is loose, repeat steps 6 through 8.
Condition: 'Except for China'/
(45,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-B6157A48-56A9-4C36-B172-3AAF44191FC9
PRECAUTIONS ON SUPPLEMENTAL RE-
STRAINT SYSTEM (SRS)
T32A130827-472B749A-1D52-40E6-A55D-E253224FD34B
This Supplemental Restraint System (SRS) section
contains important information concerning the driver’s
and passenger’s supplemental front-impact air bags,
supplemental side-impact air bags, supplemental
curtain side-impact air bags and pre-tensioner seat
belts.
Supplemental front-impact air bag system
T32A130827-B8254390-3B61-40FC-91DE-1 AC76EF9CA11
This system can help cushion the impact force to the
head an d chest area of the driver and/or front
passenger in certain frontal collisions. The supple-
mental front-impact air bag is designed to inflate on the
front where the vehicle is impacted.
Supplemental side-impact air bag system (if
equipped)
GUID-86134849-D1CC-4A18-B616-BEDE533187A6
This system can help cushion the impact force to the
chest area of the driver and front passenger in certain
side-impact collisions. The supplemental side-impact
air bag is designed to inflate on the side where the
vehicle is impacted.
Supplemental curtain side-impact air bag
system (if equipped)
GUID-9482082F-6DCB-432F-9FD0-9A1EB3E05C4C
This system can help cushion the impact force to the
head of the driver and passengers in front and rear
outboard seating position s in cer tain side -impact
collisions. The supplemental curtain side-impact air
bag is designed to inflate on the side where the vehicle
is impacted.
The SRS is designed to supplement the accident
protection provided by the driver’s and passenger’s
seat belts and is not designed to substitute for them.
The SRS can help save lives and reduce serious
injuries. However, inflating air bags may cause abra-
sions or other injuries. Air bags do not provide
protection to the lower body. Seat belts should always
be correctly worn and the occupants should always be
seated a suitable distance away from the steering
wheel and instrument panel. (See “Seat belts” (P.1-9).)
The air bags inflate quickly in order to help protect the
occupants. The force of the air bags inflating can
increase the risk of injury if the occupants are too close
to, or are against, the air bag modules during inflation.
The air bags will deflate quickly after deployment.
The SRS operates only when the ignition switch
is in the “ON” position.
When the ignition switch is in the “ON” position,
the SRS air bag warning light illuminates for
about 7 sec onds and then turn s off. This
indicates that the SRS air bag system is opera-
tional. (See “SRS air bag warning light” (P.1-31).)
Safety — seats, seat belts and supplemental restraint system 1-27
SUPPLEMENTAL RESTRAINT
SYSTEM (SRS)
Condition: 'Except for China'/
(46,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-28 Safety — seats, seat belts and supplemental restraint system
SSS0131A
SSS0132A
WARNING:
. The supplemental fron t-impact air bags
ordinarily will not inflate in the event of a
side impact, rear impact, rollover, or lower
severity frontal collision. Always wear the
seat belts to help reduce the risk or severity
of injury in accidents.
. The seat belts and the supplemental front-
impact air bags are most effective when you
are sitting well back and upright in the seat.
The front-impact air bags inflate with great
force. If you and your passengers are unrest-
rained, leaning forward, sitting sideways, or
out of position in any way, you and your
passengers are at greater risk of injury or
death in an accident. You and your passen-
gers may also receive serious or fatal
injuries from the supplemental front-impact
air bag if you are up against it when it
inflates. Always sit back against the seat-
back and as far away as practical from the
steering wheel or instrument panel. Always
use the seat belts.
SSS0006
SSS0007
SSS0008
Condition: 'Except for China'/
(47,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
SSS0009
SSS0099
SSS0100
WARNING:
. Never let childre n ride unrestrained or
exten d their hands or face out of the
window. Do not attempt to hold them in
your lap or arms. Some examples of danger-
ous riding posit ions are shown in the
illustrations.
. Children may be severely injured or killed
when the suppleme ntal front-impact air
bags, supplemental side-impact air bags, or
supplemental curtain side-impact air bags
inflate if they are not properly restrained.
. Never install a rear-facing child restraint
system on the fro nt seat. An inflating
sup plemental front-impact air bag co uld
seriously injure or kill your child. (See “Child
restraints” (P.1-14).)
SSS0059A
SSS0140
SSS0159
SSS0162
Safety — seats, seat belts and supplemental restraint system 1-29
Condition: 'Except for China'/
(48,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-30 Safety — seats, seat belts and supplemental restraint system
WARNING:
. The supplemental side-impact air bags and
supplemental curtain side-impact air bags
ordinarily will not inflate in the event of a
front impact, rear impact, rollover, or lower
severity side collision. Always wear the seat
belts to help reduce the risk or severity of
injury in accidents.
. The seat belts and the supplemental side-
impact air bags and supplemental curtain
side-impact air bags are most effective when
you are sitting well back and upright in the
seat. The supplemental side-impact air bags
and supplementa l curtain s ide-impact air
bags inflate with great force. If you and your
passengers are unrestrained, leaning for-
ward, sitting sideways, or out of position in
any way, you and your passengers are at
greater risk of injury or death in an accident.
. Do not allow anyone to place their hands,
legs, or face near the supplemental side-
impact air bags and supplemental curtain
side-impact air bags on the sides of the
seatback of the front seats or near the side
roof rails. Do not allow anyone sitting in the
front seats or rear outboard seats to extend
their hands out of the windows or lean
against the doors. Some examples of dan-
gerous riding positions are shown in the
illustrations.
. When sitting in the rear seats, do not hold
onto the seatback of the front seats. If the
supplemental side-impact air bags and sup-
plemental curtain side-impact air bags in-
flat e, you may be seriously injured. Be
especially careful with children, who should
always be properly restrained.
. Do not use seat covers on the front seat-
backs. They may interfere with the supple-
mental side-impact air bag inflations.
Pre-tensioner seat belt system
T32A130827-4BCD70AF-5EB8-439E-9317-35CFA875C11C
The pre-tensioner se at belt system activa tes in
conjunction with the supplemental front-impact air
bag. Working with the seat belt retractor and anchor, it
helps tighten the seat belt the instant the vehicle
becomes involved in certain types of collisions, helping
to restrain front seat occupants. (See “Pre-tensioner
seat belt system ” (P.1-36).)
Air bag warning labels
GUID-0ADA328D-ED2F-4A46-963A-9AE0C024C763
SSS1023
Warning labels about the supplemental air bag system
are placed in the vehicle as shown in the illustration.
The warning label
*
1
is located on the surface of the
driver’s and/or passenger’s sun visor.
The warning label
*
2
(if equipped) is located on the
side of the passenger’s side body panel.
The label(s) warn you not to fit a rear-facing child
restraint system on the front passenger seat as such a
restraint system used in this position could cause
serious injury to t he infant in case of air bag
deployment during a collision.
Type A:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0260X
*
1
Air bag warning label (sample)
The label
*
1
design varies depending on the model.
The label warns:
“Extreme Hazard! Do not use a rearward facing child
restraint on a seat protected by an airbag in front of it!”
Type B:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0243X
*
1
Air bag warning label
The label
*
1
warns:
“NEVER use a rearward facing child restraint on a seat
Condition: 'Except for China'/
(49,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
protected by an ACTIVE AIRBAG in front of it, DEATH
or SERIOUS INJURY to the CHILD can occur.”
In vehicles equipped with a front-impact passenger air
bag system, use a rear-facing child restraint system
only on the rear seats.
When installing a child restraint system in your vehicle,
always follow the child restraint system manufacturer’s
instructions for installation. For additional information,
see “Child restraints” (P.1-14).
SRS air bag warning light
T32A130827-971922A3-CFCF-4D59-9EA7-ED964CBD8FB6
SPA1097
The SRS air bag warning light, displaying
in the
meter, monitors the circuits for the air bag systems,
pre-tensioner seat belt systems and all related wiring.
When the ignition switch is in the “ON” position, the
SRS air bag warning light illuminates for about 7
seconds and then turns off. This indicates that the SRS
air bag systems are operational.
If any of the following conditions occur, the air bag
and/or pre-tensioner seat belt systems need servicing:
. The SRS air bag warning light remains on after
approximately 7 seconds.
. The SRS air bag warning light flashes intermit-
tently.
. The SRS air bag warning light does not illuminate
at all.
Under these conditions, the air bag and/or pre-
tensioner seat belt systems may not operate properly.
They must be c hecked and repaired. Contact a
NISSAN dealer immediately.
Safety — seats, seat belts and supplemental restraint system 1-31
Condition: 'Except for China'/
(50,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-32 Safety — seats, seat belts and supplemental restraint system
SUPPLEMENTAL AIR BAG SYSTEMS
T32A130827-CC7CAE86-4F98-4522-B914-451C2CAE61E8
JVR0379X
1. Crash zone sensor
2. Supplemental front-impact air bag modules
3. Front passenger air bag switch (if equipped)
4. Supplemental side-impact air bag modules (if
equipped)
5. Supplemental curtain side-impact air bag in-
flators (if equipped)
6. Supplemental curtain side-impact air bag mod-
ules (if equipped)
7. Satellite sensors (if equipped)
8. Pre-tensioner seat belt retractors
9. Lap outer pre-tensioner (if equipped)
10. Satellite sensors (if equipped)
WARNING:
. Do not place any objects on the steering
wheel pad, on the instrument panel, and
near the front door finishers and the front
seats. Do not place any objects between any
occupants and the steering wheel pad, on
the instrument panel, and near the front
door finishers and the front seats. Such
objects may become dangerous projectiles
and cause injury if a supplemental air bag
inflates.
. Immediately after inflation, several supple-
mental air bag system components will be
hot. Do not touch them: you may severely
burn yourself.
. No unauthorized changes should be made
to any components or wiring of the supple-
mental air bag systems. This is to prevent
accidental inflation of the supplemental air
bags or damage to the supplemental air bag
systems.
. Do not make unauthorized changes to your
vehicle’s electrical system, suspension sys-
tem, front end structure, and side panels.
This could affect proper operation of the
supplemental air bag systems.
. Tampering with the supplemental air bag
systems may result in ser ious personal
injury. Tampering includes changes to the
steering wheel and the instrument panel by
placing materials over the steering wheel
pad and above, around or on the instrument
panel or by installing additional trim materi-
als around the supplemental air bag sys-
tems.
. Work around and on the supplemental air
bag systems should be done by a NISSAN
dealer. The SRS wiring shou ld not be
modified or disconnected. Unauthorized
electrical test equipment and probing de-
Condition: 'Except for China'/
(51,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
vices should not be used on the supple-
mental air bag systems.
. The SRS wiring harness connecto rs are
yellow and/or orange for easy identification.
When the air bags inflate, a fairly loud noise may be
heard, followed by the release of smoke. This smoke is
not harmful and does not indicate a fire. Care should
be taken not to inhale it, as it may cause irritation and
choking. Those with a history of a breathing condition
should get fresh air promptly.
Supplemental front-impact air bag system
T32A130827-AE60A990-BBBA-4498-ADE8-040A6243FCC1
The driver’s s upplemental front-impact air bag is
located at the center of the steering wheel. The
passenger’s supplemental front-impact air bag is
located at the instrument panel above the glove box.
The supplemental front-impact air bag system is
designed to inflate in higher severity frontal collisions,
although it may inflate if the forces in another type of
collision are similar to those of a higher severity frontal
impact. It may not inflate in certain frontal collisions.
Vehicle damage (or lack of it) is not always an
indication of proper supplemental front-impact air
bag system operation.
Front passenger air bag status light (if
equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0374X
OFF light
JVR0264X
ON light
The front passenger air bag status light is located on
the instrument panel.
When th e ignition switch is placed in the “ON”
position, the front passenger air bag status ON and
OFF lights illuminate and then turn off or remain on
depending on the front passenger air bag status.
. When the ignition switch is placed in the “ON”
position and the front passenger air bag is active,
the front passenger air bag status OFF light
will turn off after about 7 seconds.
The front passenger air bag status ON light
will illuminate and then turn off after 1 minute when
the front passenger air bag switch is in the “ON”
position.
. When the ignition switch is placed in the “ON”
position and the front passenger air bag is
inactive, the front passenger air bag status ON
light
will turn off after about 7 seconds.
The front passenger air bag status OFF light
will illuminate and remain on as long as the
front passenger air bag switch is in the “OFF”
position.
If the front passenger air bag status light operates in a
way other than described above, the front passenger
air bag may not function properly. Have the system
checked, and if necessary repaired, by a NISSAN
dealer promptly.
Front passenger air bag switch (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0365X
The front passenger air bag can be turned off with the
front passenger air bag switch located in the glove box.
To turn off the front passenger air bag:
1. Place the ignition switch in the “OFF” position.
Safety — seats, seat belts and supplemental restraint system 1-33
Condition: 'Except for China'/
(52,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-34 Safety — seats, seat belts and supplemental restraint system
2. Open the glove box and insert the mechanical key
into the front passenger air bag switch. For the
mechanical key usage, see “Keys” (P.3-2).
3. Push and turn the key to the “OFF” position.
4. Place the ignition switch in the “ON” position. The
front passenger air bag status OFF light
will illuminate and remain on.
To turn on the front passenger air bag:
1. Place the ignition switch in the “OFF” position.
2. Open the glove box and insert the mechanical key
into the front passenger air bag switch.
3. Push and turn the key to the “ON” position.
4. Place the ignition switch in the “ON” position. The
front passenger air bag status ON light
will
illuminate.
5. After 1 minute, the front passenger air bag status
ON light
will turn off.
Supplemental side-impact air bag system (if
equipped)
GUID-BEFFBC47-CAF3-4636-BD3B-266D82D846E8
SSS0978
The supplemental side-impact air bag is located at the
outside of the front seats’ seatbacks.
The supplemental side-impact air bag system is
designed to inflate in higher severity side collisions,
although it may inflate if the forces in another type of
collision are similar to those of a higher severity side
impact. It may not inflate in certain side collisions.
Vehicle damage (or lack of it) is not always an
indication of proper supplemental side-impact air bag
system operation.
Supplemental curtain side-impact air bag
system (if equipped)
T32A130827-8A1E3118-ECDC-4E98-AD6C-EE4CF12DB35C
The supplemental curtain side-impact air bag is
located at the roof rails.
The supplemental curtain side-impact air bag system is
designed to inflate in higher severity side collisions,
although it may inflate if the forces in another type of
collision are similar to those of a higher severity side
impact. It may not inflate in certain side collisions.
Vehicle damage (or lack of it) is not always an
indication of proper supplemental curtain side-impact
air bag system operation.
SRS AIR BAG DEPLOYMENT CONDITIONS
T32A130827-183F8441-8C2D-4047-8629-31F765F616F3
The SRS air bags activate in the event of a front or side
impact in which the vehicle occupants may be severely
injured even if they are wearing the seat belts properly.
They may not activate when the crash energy is
absorbed and/or distribu ted by the vehicle body.
Vehicle damage (or lack of it) is not always an
indication of proper SRS air bag system operation.
When the SRS air bag will deploy
T32A130827-00F11DD9-A3D1-4933-8597-3B9799B48F0F
Supplemental front-impact air bags:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
The supplemental front-impact air bag syste m is
designed to inflate in higher severity frontal collisions.
Some examples are shown in the following illustrations.
JVR0151X
The supplemental front-impact air bag system will
deploy in the event of an impact which exceeds a 25
km/h frontal collision with a solid wall that does not
move or deform.
The supplemental front-impact air bag system may also
deploy when the vehicle receives severe damage to
the undercarriage.
Condition: 'Except for China'/
(53,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
JVR0152X
. Hitting a curb, pavement edge or hard surface at
high speed
. Falling into a deep hole or ditch
. Landing hard on the ground after jumping
Supplemental side-impact and curtain side-im-
pact air bags (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
The supplemental side-impact and curtain side-impact
air bag systems are designed to inflate in higher
severity side collisions. Some examples are shown in
the following illustrations.
JVR0161X
(supplemental side-impact air bag system)
JVR0162X
(supplemental curtain side-impact air bag system)
. The supplemental side-impact and curtain side-
impact air bags will deploy in the event of a side
impact with a normal passenger vehicle that
exceeds at a speed of 25 km/h.
When the SRS air bag is unlikely to deploy
T32A130827-BB732676-9259-4144-A4F5-2F746D9DD70A
The SRS air bags may not deploy in cases where the
impact is not forceful enough to inflate the SRS air
bags.
For example, if the vehicle strikes an object, such as a
parked vehicle or sign pole, which can move or deform
on impact, the SRS air bags are unlikely to deploy.
Supplemental front-impact air bags:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0154X
. Striking a vehicle of the same class that is parked
. Crashing into a solid utility pole
JVR0155X
Safety — seats, seat belts and supplemental restraint system 1-35
Condition: 'Except for China'/
(54,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-36 Safety — seats, seat belts and supplemental restraint system
. Running under the tail gate of a truck
. A frontal offset impact to the guard rails
Supplemental side-impact and curtain side-im-
pact air bags (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0156X
. A collision from the side at an angle
. A side impact with a two-wheeled vehicle
JVR0157X
. A collision from the side impacting the vehicle
engine room (luggage room)
. Vehicle rollover
JVR0163X
. A frontal offset impact to the guard rails
. A collision with a pole
When the SRS air bag will not deploy
T32A130827-61CCFA92-4663-4E23-AD03-1EC1157430F4
Once the SRS air bag has inflated, the air bag module
will not function again if your vehicle collides with
another vehicle or an object.
Other examples where the SRS air bag will not deploy
are shown in the following illustrations.
Supplemental front-impact air bags:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0159X
. A collision from the side or rear
. Vehicle rollover
Supplemental side-impact and curtain side-im-
pact air bags (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0160X
. A frontal collision with a parked or moving vehicle
. A rear collision
PRE-TENSIONER SEAT BELT SYSTEM
T32A130827-137C753A-7498-4A14-80A7-440CA88B5DC2
WARNING:
. The pre-tensioner seat belt cannot be re-
used after activation. It must be replaced
together with the retractor and buckle as a
unit.
. If the vehicle becomes involved in a collision
but the pre-tensioner is not activated, be
sure to have the pre-tensioner system
checked and, if necessary, replaced by a
NISSAN dealer.
. No unauthorized changes should be made
to any components or wiring of the pre-
tensioner seat belt system. This is to prevent
accidental activation of the pre-tensioner
seat belt or damage to the pre-tensioner
seat belt system.
Condition: 'Except for China'/
(55,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
. Work around or on the pre-tensioner seat
belt system should be done by a NISSAN
dealer. The SRS wiring shou ld not be
modified or disconnected. Unauthorized
electrical test equipment and probing de-
vices should not be used on the pre-
tensioner seat belt system.
. If you need to dispose of the pre-tensioner
seat belt system, or scrap the vehicle,
contact a NISSAN dealer. Correct pre-ten-
sioner disposal procedures are set forth in
the appropriate NISSAN Service Manual.
Incorrect disposal procedures could cause
personal injury.
The pre-tensioner is encased with the front seat belt’s
retractor and anchor. These seat belts are used the
same as conventional seat belts.
When the pre-tensioner seat belt activates, a fairly loud
noise may be heard, followed by the release of smoke.
This smoke is not harmful and does not indicate a fire.
Care should be taken not to inhale it, as it may cause
irritation and choking. Those with a history of a
breathing condition should get fresh air promptly.
REPAIR AND REPLACEMENT PROCE-
DURE
T32A130827-AF39DFE7-7F95-4916-B588-9FCB8971A5BA
WARNING:
. Once the air bags have been inflated, the air
bag modules will not function and must be
replaced. T he air bag modules must be
replaced by a NISSAN dealer. The inflated
air bag modules cannot be repaired.
. The air bag systems should be inspected by
a NISSAN dealer if there is any damage to
the front end portion of the vehicle.
. If you need to dispose of the SRS or scrap
the vehicle, contact a NISSAN dealer. Cor-
rect disposal procedures are set forth in the
appropriate NISSAN Service Manual. Incor-
rect disposal procedures could cause perso-
nal injury.
The air bags and pre-tensioner seat belts are designed
to activate on a one-time-only basis. As a reminder,
unless the SRS air bag warning light is damaged, the
SRS air bag warning light remains illuminated after
inflation has occurred. The repair and replacement of
the SRS should be done only by a NISSAN dealer.
When maintenance work is required on the vehicle,
information about the air bags, pre-tensioner seat belts
and related parts should be pointed out to the person
performi ng the maintenance. The ignition switch
should always be in the “LOCK” position when working
under the hood or inside the vehicle.
Safety — seats, seat belts and supplemental restraint system 1-37
Condition: 'Except for China'/
(56,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-38 Safety — seats, seat belts and supplemental restraint system
MEMO
Condition: 'Except for China'/

Related Topics

Seats Head restraints Seat belts Child restraints Supplemental Restraint System (SRS)

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot