2007-2012 Nissan X Trail SUV Safety ? seats, seat belts and supplemental restraint system -> Seats User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety ? seats, seat belts and supplemental restraint system -> Seats for Your Nissan X Trail SUV Second Generation (2007-2012)

(20,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-2 Safety — seats, seat belts and supplemental restraint system
T32A130827-544A337B-5822-4F19-AD26-8D99DEA60151
SSS0133A
WARNING:
. Do not drive and/or ride in the vehicle with
the seatback reclined. This can be danger-
ous. The shoulder belt will not be properly
against the body. In an accident, you and
your passengers could be thrown into the
shoulder belt and receive neck or other
serious injuries. You and your passengers
could also slide under the lap belt and
receive serious injuries.
. For the most effective protection while the
vehicle is in motion, the seatback should be
upright. Always sit well back in the seat and
adjust the seat belt properly. (See “Seat
belts” (P.1-9).)
CAUTION:
When adjusting the seat positions, be sure not
to contact any moving parts to avoid possible
injuries and/or damages.
FRONT SEATS
T32A130827-F0BDEADE-E0E8-43E7-B8D5 -DAAAE46362C7
WARNING:
Do not adjust the driver’s seat while driving so
that full attention may be given to vehic le
operation.
Manual seat adjustment
T32A130827-44B2F3FC-EF1E-4159-AA42-22C9D53C6CFA
WARNING:
After adjusting a seat, gently shake the seat to
confirm that the seat is locked securely. If the
se at is not locked securely, it may move
suddenly and could cause the loss of control of
the vehicle.
SEATS
Condition: 'Except for China'/
(21,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
JVR0332X
Forward and backward:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
1. Pull up the adjusting lever
*
1
.
2. Slide the seat to the desired position.
3. Release the adjusting lever to lock the seat in
position.
Reclining:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
1. Pull up the adjusting lever
*
2
.
2. Tilt the seatback to the desired position.
3. Release the adjusting lever to lock the seatback in
position.
The reclining feature allows the adjustment of the
seatback for occupants of different sizes to help obtain
the proper seat belt fit. (See “Seat belts” (P.1-9).)
The seatback may be reclined to allow occupants to
rest when the vehicle is parked.
Seat lifter (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0333X
Pull up or push down the adjusting lever to adjust the
seat height until the desired position is achieved.
Power seat adjustment
T32A130827-8BB0095E-C954-4EA7-BCA6-E3736507277F
WARNING:
Never leave children or adults who would
normally require the support of others alone in
the vehicle. Pets should not be left alone either.
They could unknowingly activate switches or
controls and inadvertently become involved in a
serious accident and injure themselves.
Operating tips:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
. The power seat motor has an auto-reset overload
protection circuit. If the motor stops during the
seat adjustment, wait 30 seconds, then reactivate
the switch.
. To avoid discharge of the battery, do not operate
the power seats for a long period of time when the
engine is not running.
Safety — seats, seat belts and supplemental restraint system 1-3
Condition: 'Except for China'/
(22,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-4 Safety — seats, seat belts and supplemental restraint system
JVR0334X
Forward and backward:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
Move forward or backward the adjusting switch
*
1
to
the desired position.
Reclining:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
Move forward or backward the adjusting switch
*
2
to
the desired position.
The reclining feature allows the adjustment of the
seatback for occupants of different sizes to help obtain
the proper seat belt fit. (See “Seat belts” (P.1-9).)
The seatback may be reclined to allow occupants to
rest when the vehicle is parked.
Seat lifter (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
JVR0119X
Pull up or push down the adjusting switch to adjust the
seat height until the desired position is achieved.
Lumbar support (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
SSS1053
The lumbar support feature prov ides lower back
support to the driver.
Push each side of the adjusting switch to adjust the
seat lumbar area until the desired position is achieved.
Heated seats (if equipped)
T32A130827-12F30A00-21DA-4474-BB84-80C0B5836ADB
JVR0322X
The front seats can be warmed by built-in heaters. The
switches located on the center console can be
operated independently of each other.
1. Start the engine.
Condition: 'Except for China'/
(23,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2. Select heat range.
.
For high heat, push the HI (High) side of the
switch
*
1
.
.
For low heat, push the LO (Low) side of the
switch
*
2
.
.
The indicator light
*
3
will illuminate when low
or high is selected.
3. To turn off the heater, return the switch to the level
position. Make sure the indicator light turns off.
The heater is controlled by a thermostat, auto-
matically turning the heater on and off. The
indicator light will remain on as long as the switch
is on.
When the vehicle’s interior is warmed, or before
you leave the vehicle, be sure to turn off the
switch.
CAUTION:
. The battery could run down if the seat heater
is operated while the engine is not running.
. Do not use the seat heater for extended
periods or when no one is using the seat.
. Do not put anything on t he seat which
insulates heat, such as a blanket, cushion,
seat cover, etc. Otherwise, the seat may
become overheated.
. Do not place anything hard or heavy on the
seat or pierce it with a pin or similar object.
This may result in damage to the seat heater.
. Any liquid spilled on the heated seat should
be removed immediately with a dry cloth.
. When cleaning the seat, never use gasoline,
thinner, or any similar materials.
SECOND ROW SEATS
T32A130827-3C944850-5F36-4EC0-8FC1-B5D4740BE525
Adjustment
T32A130827-C4C3921B-4C08-4E61-8F01-E53BD4BE934E
JVR0330X
Forward and backward:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
1. Pull up the adjusting lever
*
1
.
2. Slide the seat to the desired position.
3. Release the adjusting lever
*
1
to lock the seat in
position.
Reclining:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
1. Pull the adjusting lever
*
2
.
2. Tilt the seatback to the desired position.
3. Release the adjusting lever
*
2
to lock th e
seatback in position.
The reclining feature allows the adjustment of the
seatback for occupants of different sizes to help obtain
the proper seat belt fit. (See “Seat belts” (P.1-9).)
The seatback may be reclined to allow occupants to
rest when the vehicle is parked.
JVR0376X
Folding:
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
1. For vehicles not equipped with third row seat: Pull
up the lever
*
1
and fold the seatback flat.
For vehicles equipped with third row seat: Pull up
the lever
*
1
and pull the strap
*
2
on the lower
side of the outboard seats to fold the seatback flat.
2. To return the seats to a seating position, push up
on the seatback until it latches in place.
WARNING:
. Never allow anyone to ride in the luggage
area or on the rear seats when they are in
the fold-down position. Use of these areas
by passengers without proper restraints
could result in serious injury in an accident
or sudden stop.
. Do not fold down the second row seats when
occupants are in the second row seat area or
any luggage is on the second row seats.
. Properly secure all luggage to help prevent it
from sliding or shifting. Do not place lug-
gage higher than the seatbacks.
Safety — seats, seat belts and supplemental restraint system 1-5
Condition: 'Except for China'/
(24,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-6 Safety — seats, seat belts and supplemental restraint system
. When returning the seatbacks to the upright
position, be certain they are c ompletely
secured in the latched position. If they are
not completely secured, passengers may be
injured in an accident or sudden stop.
Walk-in mechanism (Three-row model):
GUID-22018305-9BAB-4201-B6FC-C08EB94A EAE0
The second row seats can tilt and slide for easy entry/
exit to/from the third row seats.
WARNING:
After operating the walk-in mechanism, be sure
to return the seat to the rearmost position and
then tilt up the seatback until it latches.
CAUTION:
. Whe n opera ting the walk-in me chanism,
push and hold the seatback and operate
slowly. If the seatback is tilted down quickly
and then allowed to slide, there is a risk that
it could contact your face or other parts of
your body, or pi nch your hand or foot,
causing injury.
. When operating the walk-in mechanism, be
sure not to contact any moving parts to
avoid possible injuries and/or damage.
. When operating the walk-in mechanism, be
sure th at the second row seats are not
occupied by passengers and/or any objects
to avoid possible injuries and/or damage.
. Do not operate the walk-in mechanism with
objects, drinks, etc. on the seat. This may
cause objects to break or cause the passen-
ger room to be soiled.
JVR0355X
1. Pull the lever
*
1
to tilt down the seatback.
2. Slide the seat forward.
3. When returning the seat to its original position,
slide the seat backward, tilt the seatback up and
then secure it in place.
THIRD ROW SEATS (if equipped)
GUID-6AFED800-DD55-4234-8775-F187F0285680
Folding
GUID-F0E0E98B-1F35-427F-AE1C-9E5024C736F1
JVR0329X
To fold the third row seats flat for maximum cargo
capacity:
1. Make sure the head restraints are all the way
down.
2. Pull the strap
*
1
to release the seat.
3. Once released, push the seatback forward
*
2
.
To return the third row seats to a seating position:
Use the pull straps
*
1
to raise each seatback. Pull
back until the seatback latches into position. Make
sure to properly raise each seatback to an upright and
secured position.
WARNING:
When the seat is returned to the normal seating
position, the head restraints must be returned to
the upright position to properly protect vehicle
occupants.
Condition: 'Except for China'/

Related Topics

Popular Owner Manuals