Driving -> Handbrake for Your Peugeot 1007 4 Door First Generation (2005-2009)

7
HANDBRAKE  
Applying  
Pull the handbrake to immobilise  
your vehicle.  
"2 TRONIC" GEARBOX  
The five-speed controlled manual  
gearbox offers a choice between the  
comfort of automatic regulation or the  
pleasure of manual gear changing.  
Releasing  
Pull on the handle and press the  
button to release the handbrake.  
This gearbox enables you to access  
two driving modes:  
-
an automated mode for automatic  
control of the gears by the gear-  
box and therefore without any  
action on the part of the driver,  
Gear lever positions  
N: neutral.  
With your foot on the brake, select  
this position to start.  
R: reverse gear.  
With the vehicle stationary, keep your  
foot on the brake pedal and push the  
gear lever upwards.  
Selection of reverse gear is accom-  
panied by an audible signal.  
A: automated mode.  
Move the lever downwards to select  
this mode.  
M +/-: sequential mode with manual  
gear changing.  
Move the lever downwards, then to  
the left to select this mode, then:  
-
a sequential mode for manual  
changing of the gears by the  
driver using the steering wheel  
controls or the gear lever.  
When the vehicle is being driven,  
illumination of this warning light  
and of the STOP warning light,  
accompanied by an audible signal  
and a message on the multifunction display,  
indicates that the handbrake is still on or  
has not been properly released.  
It consists of the following controls:  
-
a gear lever 1 on the centre  
console for selecting the driving  
mode, reverse gear and neutral  
or for changing gear in sequential  
mode,  
a "ꢀ" steering wheel control2 for se-  
quential downward gear changes,  
When parking on a slope,  
direct your wheels to immo-  
bilise them against the pave-  
ment, pull the handbrake and  
engage a gear.  
-
-
a "+" steering wheel control 3 for  
sequential upward gear changes.  
-
-
push forward to change up,  
push rearward to change down.  
102  
7
HANDBRAKE  
Applying  
Pull the handbrake to immobilise  
your vehicle.  
"2 TRONIC" GEARBOX  
The five-speed controlled manual  
gearbox offers a choice between the  
comfort of automatic regulation or the  
pleasure of manual gear changing.  
Releasing  
Pull on the handle and press the  
button to release the handbrake.  
This gearbox enables you to access  
two driving modes:  
-
an automated mode for automatic  
control of the gears by the gear-  
box and therefore without any  
action on the part of the driver,  
Gear lever positions  
N: neutral.  
With your foot on the brake, select  
this position to start.  
R: reverse gear.  
With the vehicle stationary, keep your  
foot on the brake pedal and push the  
gear lever upwards.  
Selection of reverse gear is accom-  
panied by an audible signal.  
A: automated mode.  
Move the lever downwards to select  
this mode.  
M +/-: sequential mode with manual  
gear changing.  
Move the lever downwards, then to  
the left to select this mode, then:  
-
a sequential mode for manual  
changing of the gears by the  
driver using the steering wheel  
controls or the gear lever.  
When the vehicle is being driven,  
illumination of this warning light  
and of the STOP warning light,  
accompanied by an audible signal  
and a message on the multifunction display,  
indicates that the handbrake is still on or  
has not been properly released.  
It consists of the following controls:  
-
a gear lever 1 on the centre  
console for selecting the driving  
mode, reverse gear and neutral  
or for changing gear in sequential  
mode,  
a "ꢀ" steering wheel control2 for se-  
quential downward gear changes,  
When parking on a slope,  
direct your wheels to immo-  
bilise them against the pave-  
ment, pull the handbrake and  
engage a gear.  
-
-
a "+" steering wheel control 3 for  
sequential upward gear changes.  
-
-
push forward to change up,  
push rearward to change down.  
102