Activating/deactivating the limiter
Return to normal driving
Switch the speed limiter on by
pressing button 4.
Turn dial 1 to position "0": the
speed limiter mode is deselected.
The display returns to the distance
recorder.
Operating fault
If a speed limiter malfunction occurs,
the speed is replaced by flashing
dashes. Contact a PEUGEOT dealer
to have the system checked.
Switch the speed limiter off by
pressing button 4: the display
confirms that it is off (OFF).
Switch the speed limiter back on
by pressing button 4 again.
Programming
Place the dial 1 in the LIMIT posi-
tion. The limiter is not yet active.
By default, the display indicates
the last speed programmed:
Exceeding the programmed
speed
Pressing the accelerator pedal to
exceed the programmed speed will
not have any effect, unless you press
the pedal firmly passing the point of
resistance.
Thespeedlimiterisdeactivatedtempo-
rarily and the programmed speed,
which is still displayed, flashes.
Returning to the programmed speed,
by means of intentional or uninten-
tional deceleration of the vehicle,
cancels the flashing automatically
and reactivates the speed limiter.
In the event of a steep descent
or sharp acceleration, the
speed limiter will not be able
to prevent the vehicle from
exceeding the programmed speed.
In any event, the speed limiter cannot
replace the need to observe speed
limits, nor can it replace the need for
vigilance and responsibility on the
part of the driver.
The driver must remain alert and stay
in complete control of his vehicle.
To prevent the mat from becoming
caught under the pedals:
Setthespeedvaluebypressingbut-
ton 2 or 3 (e.g.: 70 mph (110 km/h).
Youcanthenchangetheprogrammed
speed using buttons 2 and 3:
-
-
-
by + or - 1 mph (1 km/h) = short
press,
by + or - 5 mph (5 km/h) = long
press,
in steps of + or - 5 mph (5 km/h) =
maintained press.
-
ensure that the mat is positioned
correctly.
never fit one mat on top of
-
another.
106
English