Driving
-
-
when towing,
driving with a space-saver type spare wheel
or snow chains fitted,
Steering mounted control
Speed limiter
System which prevents the
-
-
puncture repair using the temporary repair
kit,
young drivers, etc.
vehicle from exceeding the speed
programmed by the driver.
The limiter is switched on manually: this
can be done regardless of the vehicle speed.
However, if you are travelling at less than
18 mph (30 km/h), the programmed speed will
be set at 18 mph (30 km/h).
The following situations may interfere with the
operation of the system or prevent it working:
-
poor visibility (inadequate street lighting,
falling snow, rain, fog),
-
windscreen area located in front of the
camera: dirty, misted, frost-covered, snow-
covered, damaged or covered by a sticker,
fault with the camera,
hidden road signs (other vehicles,
vegetation, snow),
The speed limiter is paused using the control.
The programmed speed can be exceeded
temporarily by pressing the accelerator firmly
beyond the point of resistance.
To return to the programmed speed, simply
release the accelerator pedal until the set limit
speed has been reached again.
The controls for this system are grouped
together on this steering mounted control.
-
-
1. Activation/deactivation of the limiter: by
pressing on the end of the control.
-
speed limit signs that do not conform to the
standard, are damaged or distorted.
2. Programming the speed/decreasing the
value: by pressing the control downwards.
3. Resuming speed limitation/increasing the
value: by pressing the control upwards.
4. Pause limitation: by pulling the control
The programmed speed is erased when
the ignition is switched off.
If an app on your smart phone is used
via Mirror Screen, the sign displayed by
the system may be temporarily hidden. It
will be redisplayed as soon as you pass
another sign.
towards you.
The limiter cannot, under any
circumstances, replace respect for speed
limits, nor the vigilance of the driver.
84
English 
