Driving
The system must be reset with the ignition on
(switch in the "ON" position or "ON" mode) and
the vehicle stationary.
F If you have a compressor (for example the
one provided in the temporary puncture
repair kit), check the pressure of all four
tyres. If it is not possible to do this check
immediately, drive carefully at reduced
speed.
Before reinitialising the system, ensure
that the pressures of the four tyres
are correct for the conditions of use
of the vehicle and conform to the
recommendations on the tyre pressure
label.
The under-inflation alert can only be relied
on if the reinitialisation of the system has
been done with the pressures in the four
tyres correctly adjusted.
F Open the glove box.
F Press the reinitialisation button.
F
When the indicator flashes
or
3 times in the instrument panel,
the reinitialisation is complete.
F In the event of a puncture, use the
temporary puncture repair kit or the spare
wheel (depending on equipment).
F Wait a few minutes before switching off
the ignition (switch to "ACC" or "LOCK"
position, or "OFF" mode).
The under-inflation detection system
does not give a warning if a pressure is
incorrect at the time of reinitialisation.
The alert is kept active until the system is
reinitialised.
The new pressure parameters saved are
treated as reference values by the system.
Reinitialisation
Snow chains
The system does not have to be
reinitialised after fitting or removing snow
chains.
6
The under-inflation alert can only be relied
on if the reinitialisation of the system has
been done with the pressures in the four
tyres correctly adjusted.
The system must be reinitialised after any
adjustment to the pressures of one or more
tyres, and after changing one or more wheels.
A label on the driver's side centre pillar reminds
you of this.
93
English 
