2014-2022 Peugeot 108 4 Door Driving -> Starting/Switching off the engine with the system Keyless Entry and Starting User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Starting/Switching off the engine with the system Keyless Entry and Starting for Your Peugeot 108 4 Door 2014-2022

Driving  
F Turn the key to position 2 (ACC).  
F Press the key in and turn it to position 1  
(LOCK).  
F Remove the key from the ignition switch.  
F Turn the steering wheel until the steering  
column locks.  
Starting the engine  
F Insert the key into the ignition switch.  
F Turn the key to position 2.  
F Unlock the steering column while turning  
the steering wheel slightly.  
Starting/Switching off the  
engine with the key  
Ignition switch  
In certain cases, you may have to apply  
significant force to move the steering  
wheel (wheels on full lock, for example).  
Avoid attaching heavy objects to the key,  
which would weigh down on its blade  
in the ignition switch and could cause  
a malfunction.  
F Vehicle with a manual gearbox: press the  
clutch pedal fully down then move the gear  
lever to neutral.  
Starting/Switching off  
the engine with the  
system Keyless Entry and  
Starting  
Changing the mode of the  
vehicle  
F Vehicle with an ETG gearbox: press the  
brake pedal firmly, keep it pressed, then  
move the gear selector to position N.  
1. LOCK position. The steering column is  
locked.  
2. ACC position. The accessories (audio  
6
system, 12 V socket, …) can be used.  
F Operate the starter motor by turning the key  
to position 4 (START).  
F Once the engine is running, release the  
key. The switch will automatically return to  
position 3 (ON).  
3. ON position. Switching the ignition on.  
4. START position. Starting the engine.  
If you use accessories for a prolonged  
period of time (with the key in position  
2 or 3), you risk discharging the battery.  
Starting your vehicle will no longer be  
possible. Take care.  
Switching off the engine  
F Stop the vehicle.  
F Vehicle with a manual gearbox: move the  
gear lever to neutral.  
F Vehicle with an ETG gearbox: move the  
gear selector to position N.  
73  
Driving  
With the electronic key inside the vehicle: each  
press of the "START/STOP" button, without  
action on the pedals, allows the mode of the  
vehicle to be changed:  
Electronic key inside the vehicle.  
F Vehicle with a manual gearbox: move the  
gear lever to the neutral position and press  
the clutch pedal fully down.  
F Vehicle with an electronic gearbox: move  
the gear selector to N and press the brake  
pedal firmly.  
If one of the starting conditions is not met,  
the indicator for the "Keyless Entry and  
Starting" system will flash rapidly on the  
instrument panel. In some circumstances,  
it may be necessary to turn the steering  
wheel slightly while pressing the "START/  
STOP" button, to help unlock the steering  
column.  
The presence of the electronic key in the  
vehicle is essential for ignition and starting  
the engine. Once the engine has started,  
make sure the electronic key is always  
on board until the end of the journey:  
otherwise you will not be able to lock the  
vehicle.  
F First press ("ACC" mode). The accessories  
(audio system, 12 V socket, etc.) can be  
used.  
F Second press ("ON" mode). Ignition on.  
F Third press ("OFF" mode).  
This indicator lamp lights up on the  
instrument panel.  
F Press the "START/STOP" button and  
If you use accessories for a prolonged  
period of time, the vehicle will  
automatically transfer into "OFF" mode  
after about 20 minutes.  
Be careful, to avoid discharging the  
battery.  
release it.  
Depending on the outside temperature,  
each start attempt can last up to about  
30 seconds. During this time, do not press  
the "START/STOP" button again, and do  
not release the clutch pedal nor the brake  
pedal (depending on the gearbox type).  
After this time, if the engine has not  
Switching off the engine  
F Stop the vehicle.  
F Vehicle with a manual gearbox: move the  
gear lever to neutral.  
F Vehicle with an ETG gearbox: move the  
gear selector to N.  
Starting the engine  
started, press the "START/STOP" button  
again to carry out a new attempt.  
With the electronic key inside the vehicle, press  
the "START/STOP" button.  
The engine stops.  
The steering column locks when a door is  
opened or the vehicle is locked.  
At the first press of the "START/  
STOP" button, this indicator lamp  
flashes slowly in the instrument panel.  
74  
Driving  
F Touch the "START/STOP" button with the  
corner of the electronic key nearest the  
light. A beep sounds when the electronic  
key is recognised, and the vehicle goes into  
"ON" mode.  
Electronic key not  
recognised  
If the vehicle is not immobilised, the  
engine will not stop.  
If the electronic key is no longer in the  
An audible signal sounds continuously when  
you open the driver's door and the vehicle is in  
"ACC" mode.  
recognition zone while you are driving or when  
you request engine switch off (at a later stage),  
an audible signal sounds to alert you.  
F Vehicle with a manual gearbox: press the  
clutch pedal fully down.  
F Press the "START/STOP" button again to  
go into "OFF" mode.  
F Vehicle with an ETG gearbox: press the  
brake pedal.  
F Check that the "Keyless Entry and Starting"  
system indicator turns green in the  
instrument panel.  
F Press the "START/STOP" button for more  
than two seconds or press it a minimum  
of 3 times in succession if you wish to  
force the engine to switch off (attention,  
restarting will not be possible without  
the key).  
Back-up starting  
F Press the "START/STOP" button. The  
engine starts.  
If the engine does not start, contact  
a PEUGEOT dealer or a qualified workshop.  
Electronic immobiliser  
Locks the engine management system after the  
ignition is switched off and prevents the vehicle  
being started by force.  
The key contains an electronic chip which has  
a specific code. When the ignition is switched  
on, the code must be recognised for starting to  
be possible.  
In the event of a malfunction, your vehicle will  
not start.  
Contact a PEUGEOT dealer or a qualified  
workshop.  
Emergency switching off  
6
In the event of an emergency only, the engine  
can be switched off without conditions. To do  
this, press for more than two seconds, or press  
the "START/STOP" button at least 3 times in  
quick succession.  
When the electronic key is in the  
recognition area and your vehicle  
does not start after pressing the  
"START/STOP" button, this warning  
lamp flashes in the instrument panel.  
In this case, the steering column locks as soon  
as the vehicle stops.  
F Vehicle with a manual gearbox: move the  
gear lever to neutral.  
F Vehicle with an ETG gearbox: move the  
gear selector to N.  
Do not make any modifications to the  
electronic immobiliser system.  
75  

Related Topics

Popular Owner Manuals