In the event of a breakdown
Installing electrical accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your vehicle,
contact a PEUGEOT dealer or a qualified
workshop.
Tweezers
Before changing a fuse, it is necessary:
F to identify the cause of the failure and rectify
it,
F to switch off all electrical consumers,
F to immobilise the vehicle and turn the
ignition off,
F to identify the defective fuse using the
allocation tables and the diagrams on the
following pages.
PEUGEOT will not accept responsibility for
the cost incurred in repairing your vehicle
or for rectifying malfunctions resulting
from the installation of accessories
not supplied and not recommended by
PEUGEOT and not installed in accordance
with its instructions, in particular when
the combined consumption of all of the
additional equipment connected exceeds
10 milliamperes.
To work on a fuse, you must:
F use the special tweezers to extract the fuse
from its location and check the condition of
its filament,
F Unclip the cover of the fusebox by pressing
on the right of the tab.
F Remove the tweezers.
F always replace the failed fuse with a fuse
of the same rating (same colour); using
a different rating could cause a fault (risk of
fire).
Changing a fuse
If the fuse fails again soon after replacement,
have the vehicle's electrical system checked by
a PEUGEOT dealer or a qualified workshop.
8
OK
Failed
115
English 
