Get Driving -> Speed limiter Guide for Peugeot 2008 SUV Second Generation (2019-2025)

Driving

Information displayed on the

instrument panel

the speed displayed by the Road signs

recognition, the "MEM" symbol is not

displayed.

– Other signs: as you approach it, the symbol

of the corresponding sign is displayed on the

instrument panel.

The actual road signs always take priority

over those displayed by the system.

The signs must comply with the Vienna

Convention on road signs.

Depending on the road conditions, several

speeds may be displayed.

► Press button 2once to save the suggested

speed value.

A message is displayed, conﬁrming the request.

► Press button 2again to conﬁrm and save the

new speed setting.

Activation / Deactivation

It is set via the Driving / Vehicle touch

screen menu.

The display then reverts to its previous state.

3. Speed limit indication

4. Speed memorisation prompt

5. Current speed setting

Extended Traﬃc Sign

Recognition

(Depending on version)

Speed limiter

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

Storing the speed setting

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

This system prevents the vehicle from

exceeding the speed programmed by the

driver (speed setting).

The speed limiter is switched on manually.

The minimum speed setting is 19 mph (30 km/h).

The speed setting remains in the system

memory when the ignition is switched oﬀ.

► Switch on the speed limiter/cruise control.

The speed limiter/cruise control information is

displayed.

Upon detecting a sign suggesting a new speed

setting, the system displays the value and

"MEM" ﬂashes for a few seconds, prompting you

to save it as a new speed setting.

This additional system recognises these road

signs and displays them on the instrument panel

if the appropriate display mode is selected:

– No entry: when entering a lane in the wrong

direction, an alert message, including the symbol

of this sign, is displayed on the instrument panel

(request to check the direction of traﬃc).

If there is a diﬀerence of less than 6 mph

(9 km/h) between the speed setting and

108

Driving

Steering-mounted control

Information displayed on

the instrument panel

Adjusting the limit speed

setting

You do not have to switch the speed limiter on in

order to set the speed.

To modify the limit speed setting based on the

vehicle’s current speed:

► Brieﬂy press button 2 or 3 to change the

value in steps of + or - 1 mph (1.6 km/h).

► Press and hold button 2 or 3 to change the

value in steps of + or - 5 mph (8 km/h).

To modify the cruise speed setting based on the

speed suggested by the Road signs recognition,

as shown on the instrument panel:

► Press button 5 once; a message is displayed

to conﬁrm the memorisation request.

► Press button 5 again to save the suggested

speed.

6. Speed limiter on/pause status indication

7. Speed limiter mode selection indication

8. Speed setting value

9. Speed suggested by the Road signs

recognition function (depending on version)

1. ON (LIMIT position)/OFF

2. Reduce the speed setting

3. Increase the speed setting

4. Pause/resume speed limiter with the speed

setting previously stored

5. Use the speed suggested by the Road signs

recognition (MEM display)

The speed is immediately shown on the

instrument panel as the new speed setting.

Switching on/Pausing

► Turn thumbwheel 1 to the "LIMIT" position

to select speed limiter mode; the function is

paused.

Temporarily exceeding the

speed setting

► Fully depress the accelerator pedal.

The speed limiter is temporarily deactivated and

the displayed speed setting ﬂashes.

► Release the accelerator pedal to return to

below the speed setting.

► If the limit speed setting is suitable (most

recent speed setting programmed in the system),

press button 4 to switch the speed limiter on.

► Pressing button 4 again temporarily pauses

the function.

For more information on the Road signs

recognition, refer to the corresponding section.

When exceeding the speed is not due to the

driver's action (e.g. in case of a steep slope), an

audible signal is triggered immediately.

When the speed setting remains below

the vehicle's speed for a prolonged

period of time, an audible warning is emitted.

109

Driving

On a steep descent or in the event of

sharp acceleration, the speed limiter will

not be able to prevent the vehicle from

exceeding the speed setting.

between vehicles, the driver remains

responsible for their driving.

In the interest of public safety, only use cruise

control if the traﬃc conditions enable vehicles

to drive at a steady speed and maintain an

adequate safety distance.

Remain vigilant while cruise control is

activated. If you press and hold one of the

speed setting modiﬁcation buttons, your

vehicle may change speed very abruptly.

When descending a steep hill, the cruise

control system cannot prevent the vehicle

from exceeding the set speed. Brake if

necessary to control the vehicle speed.

On steep climbs or when towing, the set

speed may not be reached or maintained.

– In heavy traﬃc (except versions with the

Stop & Go function).

– On winding or steep roads.

– On slippery or ﬂooded roads.

– In poor weather conditions.

– In the event of restricted visibility for the

driver.

– Driving on a speed circuit.

– Driving on a rolling road.

– When using a ‘space-saver’ type spare

wheel.

If necessary, apply the brakes to control your

vehicle’s speed.

When the vehicle speed returns to the speed

setting level, the speed limiter operates again:

the speed setting display becomes ﬁxed again.

Switching oﬀ

► Turn the thumbwheel 1 to the "OFF" position:

speed limiter information is no longer displayed.

– When using snow chains, non-slip covers

or studded tyres.

Malfunction

Cruise control

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids and the

Cruise control - particular

Exceeding the programmed speed

setting

You can temporarily exceed the speed

setting by pressing the accelerator pedal (the

programmed speed ﬂashes).

To return to the speed setting, release the

accelerator pedal (when the set speed is

reached again, the displayed speed stops

ﬂashing).

In the event of a malfunction, dashes are

displayed ﬂashing and then ﬁxed instead of the

speed setting.

Have it checked by a PEUGEOT dealer or a

qualiﬁed workshop.

recommendations.

This system automatically maintains the

vehicle’s speed at the value programmed

by the driver (speed setting), without the use of

the accelerator pedal.

Cruise control - Speciﬁc

recommendations

Cruise control is switched on manually.

It requires a minimum vehicle speed of 25 mph

(40 km/h).

With a manual gearbox, third gear or higher must

be engaged.

Operating limits

Never use the system in the following

situations:

– In an urban area with the risk of

pedestrians crossing the road.

The cruise control function does not

guarantee compliance with the maximum

authorised speed and the safety distance

110

Driving -> Speed limiter for Your Peugeot 2008 SUV Second Generation (2019-2025)

Related Topics

Driving