Advertisement

Advertisement

COMFORT -> AIR CONDITIONING for Your Peugeot 206 4 Door 1998-2013

42 - COMFORT  
Press the switch, the indica-  
tor light comes on.  
AIR CONDITIONING  
The air conditioning can only operate when the engine is running.  
The air conditioning does not op-  
erate while the air low adjustment  
control is in the "OFF" position.  
To guarantee correct operation of  
your air conditioning system, we also  
recommend that you have it checked  
regularly.  
2. Temperature adjustment  
Turn the control from blue (cold) to  
red (hot) to adjust the temperature to  
suit your requirements.  
1. Air conditioning On/Off  
The air conditioning is designed to operate effectively in all seasons, with the  
windows closed. In summer, it permits lowering of the temperature and in winter,  
above 0 °C, it increases the effectiveness of the demisting.  
COMFORT 43  
-
3. Air distribution adjustment  
4. Air low adjustment  
Turn the control from position  
5. Air intake/Air recirculation  
Intake of exterior air.  
Windscreen and side windows  
(de-icing/demisting).  
1 to position 4 to obtain an  
air low suficient to ensure  
your comfort.  
Air recirculation.  
Windscreen,sidewindowsand  
footwells.  
The recirculation of interior air pre-  
vents exterior odours and smoke en-  
tering the passenger compartment.  
The intake of exterior air prevents  
and eliminates misting of the wind-  
screen and side windows.  
Used simultaneously with the air con-  
ditioning, air recirculation improves  
air conditioning performance.  
Usedinadampclimate, airrecirculation  
may result in misting of the windows.  
Move the manual control 5 to the  
right to the "Interior air recirculation"  
position.  
Footwells.  
These settings are recommended for  
cold climates.  
Centre and side vents.This  
setting is recommended for  
hot climates.  
Move the manual control 5 to the left  
to the "Exterior air intake" position as  
soon as possible to prevent deterio-  
ration of the air quality.  
The air distribution can be adjusted  
by placing the control in an interme-  
diate position.