COMFORT 47
-
It is impossible to access the
rear seats if the front seat is in a
reclining position.
FRONT SEATS
1 - Forwards-backwards
adjustment
Lift the control and slide the seat for-
B. Place your ingers in one of the
two handles and push forwards
to fold down the seat back. The
seat does not move forward.
When put back, the seat back
returns to its initial angle.
wards or backwards.
2 - Head restraint height and
angle adjustment
To raise the restraint, pull it upwards.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
The head restraint is itted with a
frame with notches, which prevent
the head restraint dropping down
(this is a safety device in the case of
impact).
4 - Height adjustment
Pull the handle upwards.
"Comma" type rear head restraints
These have one position for when
they are in use (high) and a storage
position (low). They can be removed.
To lower the head restraints, press
the lug.
To remove them, pull upwards as far
as the stop then press the release
control.
Remove your weight from the seat to
raise, or press on the seat to lower.
To lower the head restraint, it is nec-
essary to push simultaneously:
5 - Seat back angle adjustment
Push the handle towards the rear.
-
the button located on the left-
hand guide at the base of the
head restraint frame,
-
the head restraint downwards.
3 - Access to the rear seats
(3-door), A or B according to
version
To remove the head restraint, press
the lug.
The head restraint angle can also be
adjusted.
A. Place your ingers in one of the
two handles and push forwards
to fold down the seat back and
move the seat forwards.
When put back, the seat returns
to its initial position.
No person or object must
prevent the seat from returning
to its initial position. Returning to
this position is necessary for it to
be locked.
Never drive with the head
restraints removed; they
should be in place and
correctly adjusted.
English 