Practical information -> Energy economy mode for Your Peugeot 208 4 Door First Generation (2012-2019)

Practical information  
-
for more than 10 minutes, to use the  
equipment for approximately 30 minutes.  
When fitting transverse roof bars, take care to  
position them correctly on the retaining pins  
located in the door apertures.  
Energy economy mode  
System which manages the duration of use of  
certain functions to conserve a sufficient level  
of charge in the battery.  
Let the engine run for the duration specified to  
ensure that the battery charge is sufficient.  
Do not repeatedly and continuously restart the  
engine in order to charge the battery.  
After switching off the engine and for  
a maximum cumulative period of around  
40 minutes, you can continue to use functions  
such as the audio and telematics system,  
the wipers, the dipped beam headlamps, the  
courtesy lamps, etc.  
For more information, contact  
a PEUGEOT dealer or a qualified  
workshop.  
If the height exceeds 40 cm, adapt the  
speed of the vehicle to the profile of the  
road to avoid damaging the roof bars and  
the vehicle's anchorage points.  
For transporting objects which are longer  
than the vehicle, refer to local legislation.  
A flat battery prevents the engine from  
starting.  
For more information on the 12 V battery,  
refer to the corresponding section.  
Switching to this mode  
A message appears in the instrument panel  
screen indicating that the vehicle has switched  
to economy mode and the active functions are  
put on standby.  
Fitting roof bars  
As a safety measure and to avoid  
damaging the roof, it is essential to use  
the transverse bars approved for your  
vehicle.  
Observe the instructions on fitting and use  
contained in the guide supplied with the  
roof bars.  
If a telephone call is being made at this  
time, it will be maintained for around  
10 minutes with the Bluetooth hands-free  
system of your audio system.  
Exiting the mode  
These functions will be automatically  
reactivated the next time the vehicle is used.  
In order to restore the use of these functions  
immediately, start the engine and let it run:  
-
for less than 10 minutes, to use the  
equipment for approximately 5 minutes,  
110