Practical information -> Load reduction mode for Your Peugeot 208 4 Door First Generation (2012-2019)

Practical information  
Installation tips  
F If you have to fit the chains during a journey,  
stop the vehicle on a flat surface on the side  
of the road.  
F Apply the parking brake and position any  
wheel chocks under the wheels to prevent  
movement of your vehicle.  
F Fit the chains following the instructions  
provided by the manufacturer.  
Towing device  
Observe the maximum authorised towable  
weight, indicated on your vehicle's  
registration certificate, the manufacturer's  
label as well as in the Technical data  
section of this guide.  
Load distribution  
F Distribute the load in the trailer so that the  
heaviest items are as close as possible to  
the axle and the nose weight approaches  
the maximum permitted without exceeding  
it.  
Air density decreases with altitude, thus  
reducing engine performance. The maximum  
towed load must be reduced by 10% for every  
1,000 metres of altitude.  
Complying with the maximum  
authorised nose weight (towball)  
also includes the use of accessories  
(bicycle carriers, tow boxes, etc.).  
F Move off gently and drive for a few  
moments, without exceeding 31 mph  
(50 km/h).  
Observe the legislation in force in the  
country in which you are driving.  
F Stop your vehicle and check that the snow  
chains are correctly tightened.  
Use towing devices and their genuine  
harnesses approved by PEUGEOT. It  
is recommended that the installation  
be performed by a PEUGEOT dealer or  
a qualified workshop.  
If the towing device is not fitted by  
a PEUGEOT dealer, it must still be  
fitted in accordance with the vehicle  
manufacturer's instructions.  
Certain driving assistance or manoeuvring  
assistance functions are automatically  
disabled if an approved towing device is  
used.  
Load reduction mode  
System which manages the use of certain  
functions according to the level of charge  
remaining in the battery.  
When the vehicle is being driven, the load  
reduction function temporarily deactivates  
certain functions, such as air conditioning,  
heated rear screen, etc.  
The deactivated functions are reactivated  
automatically as soon as conditions permit.  
It is strongly recommended that before  
you leave, you practise fitting the snow  
chains on a level and dry surface.  
Avoid driving with snow chains on roads  
that have been cleared of snow to avoid  
damaging your vehicle's tyres and the  
road surface. If your vehicle is fitted with  
alloy wheels, check that no part of the  
chain or its fixings is in contact with the  
wheel rim.  
7
109